Mounting systems for solar technology K2 SYSTEMS Customer

Mounting systems for solar technology
K2 SYSTEMS
Customer training – S-Rock 15°
EN
AGENDA
S-ROCK 15°
1.
2.
3.
4.
System & articles
Assembly
Dimensioning – row distance
Layout & ballasting
S-ROCK 15°
2
FLAT ROOF SYSTEMS
K2 S-ROCK 15°
Application:
¬ Flat roofs up to 5°
¬ Foil and bitumen roofs with and without a parapet wall
¬ Module length: 1638 – 1685mm
Advantages:
¬ 1 component
¬ Railless system – logistically advanced (shipped on palettes)
¬ 15° elevation angle
¬ 2 universal module clamps (25-50 mm frame height)
¬ Integrated solution for module cable management
¬ Ballasting directly in the component
¬ Optimized load application – verified by structural engineers & wind tunnel tested
S-ROCK 15°
3
FLAT ROOF SYSTEMS
S-ROCK 15°
¬ Screwed fastenig for Block Connector from structural facings sector for
fixed & non-fixed bearing
¬ UV-resistable caps for T-Tray
¬ Pilot-whole for Windbreaker & Connector
¬ Prove of Lightning protection available June 2016
S-ROCK 15°
4
SYSTEM & ARTICLES
S-ROCK 15°
S-Rock front - 2002245
S-Rock Windbreaker
2002247
S-ROCK 15°
S-Rock - 2002244
S-Rock Block connector Set
2002295
S-Rock end - 2002246
S-Rock T-Tray Set
2002331
5
SYSTEM & ARTICLES
S-ROCK 15°
MiniClamp EC Set 34-50 mm - 2000059
MiniClamp EC Set 25-35 mm - 2002348*
MiniClamp MC Set 34-50 mm - 1006413
MiniClamp MC Set 25-35 mm - 2002347*
self-tapping screw 1005207
BSM Wings (old:SD)
2001740/2001739
Omega Cable Clip
1005394
Cable Routing Clip
2002322
*available after InterSolar 2016
S-ROCK 15°
6
ASSEMBLY
S-ROCK 15°
S-ROCK 15°
7
ASSEMBLY
S-ROCK 15°
1. Add building protection mats & clamps to the S-Rock
S-ROCK 15°
8
ASSEMBLY
S-ROCK 15°
2. Measure / mark right angle for the
module field and place S-Rocks on the
roof according to module width
S-ROCK 15°
3. Place the modules on the S-Rocks
row after row and fasten the clamps.
9
ASSEMBLY
S-ROCK 15°
4. Fix module cable with Cable Routing
Clip or Omega Clip (depending on
module cable length)
S-ROCK 15°
4.1 Alternative: fix Cable Routing Clip
on module frame
10
ASSEMBLY
S-ROCK 15°
5. Mount Block Connector
6. Mount Windbreaker
S-ROCK 15°
11
ASSEMBLY
S-ROCK 15°
7. Ballast the system with paving stones
7.1 Higher ballasting required: T-Tray Set
S-ROCK 15°
12
DIMENSIONING – ROW DISTANCE - GLOBALLY
S-ROCK 15°
Row distance: 1.76 m
No shadowing
S-ROCK 15°
13
DIMENSIONING – ROW DISTANCE - EUROPE
S-ROCK 15°
Row distance: 1.76 m
No shadowing
S-ROCK 15°
14
DIMENSIONING – ROW DISTANCE - GERMANY
S-ROCK 15°
Row distance: 1.76 m
Flensburg
Shadow in Nov, Dec & Jan
Partly Shadowed
No shadowing
S-ROCK 15°
15
DIMENSIONING – ROW DISTANCE - EUROPE
S-ROCK 15°
Row distance: 1.76 m
Shadow in Nov,
Dec & Jan
Partly shadowed
No shadowing
S-ROCK 15°
16
DIMENSIONING – ROW DISTANCE
S-ROCK 15°
Individual S-Rock Length:
¬ Row distance < 1.76m: available within ~ 2-3 weeks, special conditions
¬ Row distance > 1.76m: special static design & wind tunnel test required
S-ROCK 15°
17
LAYOUT & BALLASTING
S-ROCK 15°
At the moment:
¬ Layout & Ballasting exclusively done by K2
After Juli:
¬ Layout & Ballasting in K2 Base online
¬ Possible for everybody
S-ROCK 15°
18
Thank you
S-ROCK 15°
19