Leibinger Instruments
for Hand Surgery
Table of Content
Instruments
for HandSurgery
Table of Content
Product
Page N°
Bone Instruments
4-7
Retractors
7
Bone Holding Forceps
8-9
Lag Screw Technique
10 - 12
Bone Graft Set
14 - 15
Hand Traction System
13
KnifeLight Instruments for CTS
16
Forceps for Plastic Surgery
17
Micro Homostatic Forceps
18
Tendon Instruments
19
Fine Scissors
20
Rongeurs
21
Bone Cutting Forceps
21
Needleholders
22
Wire Twisters and Cutters
22
Mallets
23
Additional Instruments for handsurgery
24 - 25
Bone Instruments
4
6.0 mm
9.0 mm
7.0 mm
strong curved
07-10005
Elevator
07-10010
Elevator
07-10024
Elevator
3.5 mm
slightly curved, blunt
2.0 mm
slightly curved
5.0 mm
slightly curved
07-10020
Elevator
07-10025
Raspatory
07-10030
Raspatory
Bone Instruments
Oval N° 00
Oval N° 0
2.0 mm
07-10040
Bone Curette
07-10045
Bone Curette
07-10062
Osteotome
3.0 mm
4.0 mm
5.0 mm
07-10063
Osteotome
07-10064
Osteotome
07-10065
Osteotome
5
Bone Instruments
6
6.0 mm
8.0 mm
3.0 mm
07-10066
Osteotome
07-10068
Osteotome
07-10083
Gouge
5.0 mm
10 mm
6.0 mm
convex
07-10085
Gouge
07-10090
Gouge
07-10105
Bone Rasp
Bone Instruments / Retractors
sharp
sharp
2 prongs
3.0 mm curve
3.0 mm wide
17 x 6.0 mm
07-10170
Bone Hook
07-10210
Skin Hook
07-10237
Retractor
2.0 mm
07-10227
Tendon Hook
07-10280
Nerve Hook
7
Bone Holding Forceps
07-30350 07-30351 07-30352
07-30350
17.5 cm, small
07-30351
17.5 cm, medium
07-30352
17.5 cm, large
Caroll-Pechlaner
07-30355
Lewin
Bone Holding Forceps 13.5 cm
92-07303
Bone Holding Forceps 13.5 cm
15-00780
13 cm
15-00782
19 cm
Bone Holding Forceps
07-30400
Bone-Reduction Instrument
8
Bone Holding Forceps
07-30358
Finger-Reposition Clamp, 17 cm
07-30360
Finger-Reposition Clamp, 14.5 cm
07-30365
Verbrugge
Bone Holding Forceps, 14.5 cm
15-00660
Dingmann, 19 cm, light pattern
64-01101
Bone and Plate Holding Forceps, 15 cm,
for Profyle XS/S/M-Plates
9
Lag Screw Technique
Reduction Forceps for Lag Screw Osteosynthesis
07-30420
Reduction Forceps, curved right, 12.5 cm
07-30421
Reduction Forceps, curved left, 12.5 cm (not ill.)
07-30425
Drill Guide for 1.0 mm Drill Bit
07-30430
Screw Guide for 1.2 mm Screw
07-30426
Drill Guide for 1.4 mm Drill Bit
07-30431
Screw Guide for 1.7 mm Screw
07-30427
Drill Guide for 1.9 mm Drill Bit
07-30432
Screw Guide for 2.3 mm Screw
07-30428
Drill Guide for 2.5 mm Drill Bit
Step 1
Drilling of the Pilot hole
1.2 mm
Lag Screw
Drill Guide
/
07-30425
Drill Guide
Step 2
Drilling of the Gliding hole
Twist Drill
1.0 mm
/
Twist Drill
Drill Guide
/
07-30426
Drill Guide
Step 3
Insertion of the Screw
Twist Drill
1.4 mm
/
Twist Drill
Screw Guide
/
07-30430
Screw Guide
Blade
1.0 mm
/
Blade
1.7 mm
Lag Screw
07-30426
Drill Guide
1.4 mm
/
Twist Drill
07-30427
Drill Guide
1.9 mm
/
Twist Drill
07-30431
Screw Guide
1.0 mm
/
Blade
2.3 mm
Lag Screw
07-30427
1.9 mm
07-30428
2.5 mm
NOTE : For screws please refer to Profyle Modular Catalogue - Literature number 90-07534
10
07-30432
1.0 mm
Lag Screw Technique
07-40100
Lag Screw Tar get Bow System,
complete, consisting of:
29-40100
Storage- and Sterilizing Container
07-40101
Reduction Instrument with Screw Measuring Scale
07-40102
Serrated Attachment for Reduction Instrument
07-40104
Target Bow for subcutaneous application, slightly curved
07-40105
Target Bow for subcutaneous application, strongly curved
07-40106
Target Bow for percutaneous application, strongly curved
62-00270
Drill Guide
62-17026*
Cross-Fit Screwdriver Blade, for 1.7 mm screws,
length 88 mm, Dental shaft end
62-23027*
Cross-Fit Screwdriver Blade, for 2.3 mm screws,
length 88 mm, Dental shaft end
*Recommended Screw driver handles 62-17004 and 62-23004
60-14124
Twist drill, working length 27 mm, Diam. 1.4 mm x 141 mm,
Stryker Shaft End
60-19124
Twist drill, working length 27 mm, Diam. 1.9 mm x 141 mm,
Stryker Shaft End
60-23124
Twist drill, working length 27 mm, Diam. 2.3 mm x 141 mm,
Stryker Shaft End
NOTE : For screws please refer to Profyle Modular Catalogue - Literature number 90-07534
11
Lag Screw Technique
Bi-Diameter Drills
A
B
1) Drilling
2) Sinking
Screw diameter
Stryker Shaft End
A
12
3) Depth measuring
B
AO Shaft End
A
B
4) Screw fixation
Dental Shaft End
A
Color Code
B
0.9
1.2
x 62 mm
60-88112
0.9
1.2
x 45 mm
60-88312
0.9
1.2
x 55 mm
60-88412
yellow/yellow/yellow
1.2 mm
1.3
1.7
x 73 mm
60-88117
1.3
1.7
x 56 mm
60-88317
1.3
1.7
x 66 mm
60-88417
red/red/red
1.7 mm
1.8
2.3
x 73 mm
60-88123
1.8
2.3
x 56 mm
60-88323
1.8
2.3
x 66 mm
60-88423
green/green/green
2.3 mm
Hand Traction System
07-30950
Hand Traction System
07-30960
Extension Sleeve consisting of wire network,
small, diam. 14 mm
07-30961
Extension Sleeve consisting of wire network,
medium, diam. 18 mm
07-30962
Extension Sleeve consisting of wire network,
large, diam. 22 mm
07-30963
Extension Sleeve consisting of wire network,
extra large, diam. 28 mm
13
Bone Graft Set
07-40021
Cup for bone grafts, height 4 cm
07-40025
Self-retaining retractor with guiding sleeves for Kirschner
wires, max. diam. 1.6 mm
07-40015
Bone graft plunger for trephines 07-40012/07-40014,
diam. 6.5 mm, 23.5 cm
07-40033
Bone graft plunger for trephine 07-40032,
diam. 3.5 mm, 23.5 cm
07-40016
Reamer for guiding sleeve 07-40013, 15.5 cm
07-40012
Donor site trephine, diam. 8.0/9.0 mm, 21.5 cm
07-40032
Donor site trephine, diam. 4.0/5.0 mm, 21.5 cm
07-40014
Recipient site trephine, diam. 7.0/8.0 mm, 18 cm
14
Bone Graft Set
07-40013
Guiding sleeve, serrated, shaft length 7.5 cm,
for recipient site trephine 07-40014
07-40031
Guiding sleeve, serrated, shaft length 10.5 cm,
for donor site trephine 07-40032
07-40011
Guiding sleeve, serrated, shaft length 10.5 cm,
for donor site trephine 07-40012
07-40030
Trocar for guiding sleeve 07-40031, 22.5 cm
07-40010
Trocar for guiding sleeve 07-40011, 22.5 cm
07-40020
Bone Curette, angled, 20.5 cm
15
Instruments for CTS
KnifeLight
Instrument for Minimal Invasive Carpal Tunnel Ligament Release
Transilluminates Ligament and Surrounding Landmarks
3300-001-000
Packaged sterile and individually
Order quantity: Box of 10
16
Forceps for Plastic Surgery
31-19134
Adson, 12 cm
31-19380
12 cm
31-19388
15 cm
Adson, 1 x 2 teeth
31-19135
Micro-Adson, 12 cm
31-19386
Micro-Adson, 12 cm, 1 x 2 teeth
31-19382
Adson-Ewald, 12 cm, 1 x 2 teeth
31-19385
Adson-Brown, 12 cm
31-19378
Gillies, 15 cm, 1 x 2 teeth
17
Micro Hemostatic Forceps
32-01016
12 cm
32-01003
10 cm
32-01017
12 cm
32-01004
10 cm
32-01018 32-01019
12 cm
12 cm
1 x 2 teeth 1 x 2 teeth
Micro Mosquito
Micro Halstead Mosquito
32-01012
14 cm
Micro Halstead Mosquito
18
32-01013
14 cm
32-01033
15 cm
Leriche
Tendon Instruments
07-15305
Tendon Tunnel Forceps, 21 cm, 1 x 2 teeth
07-15350
Tendon Interlacing Forceps, 15 cm, straight
07-15355
Tendon Interlacing Forceps, 15 cm, curved
19
Fine Scissors
37-12301
37-12311
37-12321
Metzenbaum
12.5 cm
14.5 cm
18.0 cm
37-12390
37-12392
Ragnell
12.5 cm
15.0 cm
straight, sharp
37-12460
curved, sharp
37-12461
Iris, 11 cm
straight
37-12485
curved
37-12486
Joseph, 15 cm
20
Rongeurs / Bone Cutting Forceps
44-22510
straight
15 cm
44-21020
44-22512
curved
15 cm
Stellbrink, 17 cm
44-21070
Friedman, 14 cm
44-22070
Beyer, 18 cm, 4.0 mm bite
44-22522
Mc Indoe, 18 cm, curved
44-21020
Bone Cutting Forceps
21
Needleholders / Wire Twisters and Cutters
Needleholders with TC-Inserts
36-06502
Halsey, fine, 13 cm
36-06507
Crile Wood, fine, 15 cm
Wire Twisters and Cutters with Carbide Inserts
36-00730
Flat Nose Plier, 14 cm
36-06710
36-06712
Pechlaner, 18 cm
37-10930
Wire Cutting Scissors, 12 cm
22
Mallets
Mallet, complete
100 g
24 mm Ø
43-09821 20 cm
150 g
27 mm Ø
43-09823 20 cm
200 g
28.5 mm Ø
43-09825 25 cm
Replaceable nylon heads (pair)
24 mm Ø
43-09822
27 mm Ø
43-09824
28.5 mm Ø
43-09826
Mallet with replaceable nylon heads
23
Additional Instruments for Handsurgery
09-00095
Special Pen
35-01815 15 cm
35-01820 20 cm
Metal Rule stainless steel
01-04150
Epker Caliper, 40 mm, lenght 9 cm
35-01500
Castroviejo Caliper, 20 mm, lenght 9 cm
07-15700
Synovectomy Forceps, 13 cm, slightly curved
64-00110
Plate Holding Forceps, curved, 11.5 cm,
for Profyle XS and S-Plates
01-08120
Plate Holding Forceps, curved, 14 cm,
for Profyle M and L-Plates (not ill.)
24
Additional Instruments for Handsurgery
64-20130
Plate and Screw Holding Forceps, angled, 15 cm
01-08105
Self-Retaining Plate Forceps, Straight
01-08115
Self-Retaining Plate Forceps, Angled
Stryker
AO
Dental
60-80140
60-80333
60-80433
Abrasive Burr, Stryker Shaft End
Abrasive Burr, AO Shaft End
Abrasive Burr, Dental Shaft End
25
Bone Instruments
Stryker Leibinger GmbH & Co. KG
Bötzinger Straße 37-41
D-79111 Freiburg
Germany
Tel.: ++49 (0) 7 61 45 12-0
Fax: ++49 (0) 7 61 45 12-120
Stryker Leibinger Inc.
4100 East Milham Avenue
Kalamazoo, MI 49001
USA
Tel.: ++1-269-323-7700
Fax: ++1-269-648-7114
http://www.leibinger.com
The information presented in this brochure is intended to demonstrate the breadth of Stryker product offerings. Always
refer to the package insert, product label and/or user instructions before using any Stryker product. Products may not be
available in all markets. Product availability is subject to the regulatory or medical practices that govern individual
markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in
your area.
The marks bearing the symbol "TM" are trademarks of Stryker.
The marks bearing the symbol "R" are registered trademarks of Stryker.
Literature Number: 90-07550
MTX Print Date 10/05
Copyright © 2005 Stryker
Printed in Europe
28