1.
Find distance E
1.
Student Response
Correct Answer
18
Equals 9 (100%)
2.
Find distance G
1.
Student Response
Correct Answer
16
Equals 16 (100%)
3.
Find distance H
1.
Student Response
Correct Answer
32
Equals 32 (100%)
4.
Find distance J
1.
Student Response
Correct Answer
36
Equals 38.5 (100%)
5.
Refer to part 1 only. Is the thread right hand OR left hand?
Student Response
A. Right hand
B. Left hand correct
6.
Refer to part 1 only. What are the limit sizes for the Dia 16 dimension?
Student Response
A. 16.16 & 15.16
B. 16.5 & 15.5 correct
C. 16.04 & 15.04
D. 16 & 15
7.
Refer to part 1 only. What is the depth of the threads?
1.
Student Response
Correct Answer
26
Contains 26 (100%)
8.
Refer to part 1 only. What is the tap drill size?
Student Response
A. 8.75
B. 26
C. 10
D. 8.5 correct
9.
Refer to part 1 only. What machining operation provides better gripping when turning the clamping nut?
Student Response
A. Socket head
B. Hexagonal head
C. Knurling correct
D. Cylindrical turning.
10.
Refer to part 2 only. How many threads are there in a 10mm length?
1.
Student Response
Correct Answer
8
Equals 8 (100%)
11.
Refer to part 2 only. Is the thread pitch fine OR course?
Student Response
A. Fine correct
B. Course
12.
Refer to part 2 only. What heat treatment does the part undergo?
1.
13.
Student Response
Correct Answer
Case Harden
Contains Case Harden (100%)
Refer to part 2 only. What is the length of thread?
1.
Student Response
Correct Answer
65
Equals 65 (100%)
14.
Refer to part 3 only. What are the limits for the dia 50 dimension?
Student Response
A. Max. 50.000; Min. 49.96 correct
B. Max. 50.096; Min. 49.000
C. Max. 50.096; Min. 50.000
D. Max. 50.000; Min. 49.02
15.
Refer to part 3 only. What is the distance between the last thread and the flange?
1.
Student Response
Correct Answer
7
Equals 7 (100%)
16.
Refer to part 3 only. What is the maximum permissable length of the part?
Student Response
A. 122.5
B. 122
C. 123.5 correct
D. 123
17.
Refer to part 3 only. What is the smallest diameter to which the hole through the stuffing box can be made?
1.
Student Response
Correct Answer
32
Equals 32 (100%)
18.
Refer to part 3 only. What is the tolerance on the centre to centre distance between the tapped holes ?
1.
19.
Student Response
Correct Answer
0.5
Equals 1 (100%)
Refer to part 3 only. What size thread is cut on the outside of the part?
1.
Student Response
Correct Answer
45
Equals M 45 (100%)
20.
Refer to the entire drawing. How many chamfers are shown?
Student Response
A. 7 correct
B. 10
C. 5
D. 14
21.
Refer to the entire drawing. How many necks are shown?
1.
Student Response
Correct Answer
1
Equals 1 (100%)
Equals one (100%)
22.
Refer to the entire drawing. How many surfaces require finishing?
Student Response
A. 10
B. 8
C. 5 correct
D. 7
23.
Refer to the entire drawing. How many threaded holes AND shafts are shown?
Student Response
A. 5 correct
B. 2
C. 1
D. 3
24.
What is distance A?
1.
Student Response
Correct Answer
10
Equals 10 (100%)
25.
What is distance B?
1.
Student Response
Correct Answer
5.5
Equals 5.5 (100%)
26.
What is distance C?
1.
Student Response
Correct Answer
80
Equals 80 (100%)
27.
What is distance D?
1.
Student Response
Correct Answer
32
Equals 7 (100%)