ISO Update
Supplement to ISOFocus
November 2013
International Standards in process
An International Standard is the result of an agreement between
the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus
has been reached within the technical committee, the document is
sent to the Central Secretariat for processing as a draft International
Standard (DIS). The DIS requires approval by at least 75 % of the
member bodies casting a vote. A confirmation vote is subsequently
carried out on a final draft International Standard (FDIS), the approval
criteria remaining the same.
CD registered
Period from 01 October to 31 October 2013
These documents are currently under consideration in the technical
committee.
They have been registred at the Central Secretariat.
ISO/CD 6789-2
Assembly tools for screws and nuts — Hand
torque tools — Requirements and test methods
for design conformance testing, quality conformance testing and recalibration procedure
— Part 2: Requirements for calibration and
determination of measurement uncertainly
TC 31
Tyres, rims and valves
ISO/CD 4000-1
Passenger car tyres and rims — Part 1: Tyres
(metric series)
TC 34
Food products
ISO/CD 17780
Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable
oils
ISO/CD 13299
Sensory analysis — Methodology — General
guidance for establishing a sensory profile
TC 36
Cinematography
ISO/CD 2969
Cinematography — B-chain electro-acoustic
reponse of motion-picture control rooms
and indoor theatres — Specifications and
measurements
TC 38
Textiles
ISO/CD
17751-1
Textiles — Quantitative analysis of cashmere,
wool, other specialty animal fibers and their
blends — Part 1: Light Microscopy method
ISO/CD
17751-2
Textiles — Quantitative analysis of cashmere,
wool, other specialty animal fibers and their
blends — Part 2: Scanning Electron Microscopy method
TC 20
Aircraft and space vehicles
ISO/CD 19281
Air cargo — Fire resistant containers — Design,
performance and testing requirements
ISO/CD
105-G01
Textiles — Tests for colour fastness — Part
G01: Colour fastness to nitrogen oxides
TC 22
Road vehicles
ISO/CD
10924-1
Road vehicles — Circuit breakers — Part 1:
Definitions and general test requirements
ISO/CD
105-G04
Textiles — Tests for colour fastness — Part
G04: Colour fastness to oxides of nitrogen in
the atmosphere at high humidities
ISO/CD
10924-4
Road vehicles — Circuit breakers — Part 4:
Medium circuit breakers with tabs (Blade type),
Form CB15
TC 43
Acoustics
ISO/CD
16717-1
ISO/CD
10924-5
Road vehicles — Circuit breakers — Part 5:
Circuit breakers with tabs with rated voltage of
450 V
Accoustics — Evaluation of sound insulation
spectra by single-numbers — Part 1: Airborne
sound insulation
ISO/DTR
12349-1
Road vehicles — Dummies for restraint system
testing — Part 1: Adult dummies
ISO/DTR
12349-2
Road vehicles — Dummies for restraint system
testing — Part 2: Child dummies
TC 23
Tractors and machinery for agriculture
and forestry
ISO/CD 789-3
Agricultural tractors — Test procedures — Part
3: Turning and clearance diameters
ISO/CD 18497
Safety of highly automated agricultural
machines
TC 28
Petroleum products and lubricants
ISO/DTR
19511-1
Petroleum products — Equivalency of test
method determining the same property —
Part 1: Atmospheric distillation of petroleum
products
TC 29
Small tools
ISO/CD 6789-1
Assembly tools for screws and nuts — Hand
torque tools — Requirements and test methods
for design conformance testing, quality conformance testing and recalibration procedure
— Part 1: Requirements and test method for
design conformance testing, quality conformance testing and calibration procedure
ISO Update, Supplement to ISO Focus -- November 2013
TC 44
Welding and allied processes
ISO/CD 19288
Welding consumables — Solid wire electrodes,
solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification
TC 45
Rubber and rubber products
ISO/CD 48
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10
IRHD and 100 IRHD)
TC 61
Plastics
ISO/CD
16620-4
Plastics — Biobased content — Part 4: Determination of the total biobased mass content
ISO/CD 18188
Plastic straws for food — Specification
TC 67
Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries
ISO/CD
14692-1
Petroleum and natural gas industries — Glassreinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
ISO/CD
14692-2
Petroleum and natural gas industries — Glassreinforced plastics (GRP) piping — Part 2:
Qualification and manufacture
ISO/CD
14692-3
Petroleum and natural gas industries — Glassreinforced plastics (GRP) piping — Part 3:
System design
1
ISO/CD
14692-4
Petroleum and natural gas industries — Glassreinforced plastics (GRP) piping — Part 4:
Fabrication, installation and operation
TC 71
Concrete, reinforced concrete and prestressed concrete
ISO/CD 18319
Fibre-reinforced polymer (FRP) reinforcement
for concrete structures: Specifications of FRP
sheets
TC 106
Dentistry
ISO/CD 18556
Dentistry — Heidemann spatulas
ISO/CD 18559
Dentistry — Spatulas for dental materials
TC 110
Industrial trucks
ISO/CD
10896-5
Rough-terrain trucks — Safety requirements
and verification — Part 5: Interface between
rough-terrrain truck and integrated personnel
work platform
ISO/CD
10896-7
Rough-terrain trucks — Safety requirements
and verification — Part 7: Longitudinal load
moment systems
ISO/CD
18479-1
Rough-terrain trucks — Non-integrated
personnel work platforms — Part 1: Design
requirements
ISO/CD
22915-24
Industrial trucks — Verification of stability —
Part 24: Slewing variable-reach trucks
TC 118
Compressors and pneumatic tools,
machines and equipment
ISO/CD 18740
Turbocompressors — Performance test code
— Complementary to ISO 5389
TC 127
Earth-moving machinery
ISO/CD
14990-1
Earth-moving machinery — Electrical safety of
machines utilising electric drives and related
components and systems — Part 1: General
Requirements
ISO/CD
14990-2
Earth-moving machinery — Electrical safety of
machines ut ilising electric drives and related
components and systems — Part 2: Particular
requirements for externally-powered machines
ISO/CD
14990-3
Earth-moving·machinery·--·Electrical·safety·of
·machines·utilising·electric·drives·and·related·
components·and·systems — Part 3: Particular
requirements for self-powered machines
TC 135
Non-destructive testing
ISO/CD 18249
Non-destructive testing — Acoustic emission — Testing of fibre reinforced polymers —
Specific methodology and general evaluation
criteria
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
ISO/CD 18488
Polyethylene pipes — Resistance to slow crack
growth — Strain Hardening test method
ISO/CD 18489
Polyethylene pipes — Resistance to slow crack
growth — Cracked Round Bar test method
ISO/CD 8639
Glass-reinforced thermosetting plastics (GRP)
pipes and fittings — Test methods for leaktightness of flexible joints
TC 142
Cleaning equipment for air and other
gases
ISO/CD
16890-2
Air filters for general ventilation — Part 2:
Measurement of fractional efficiency and air
flow resistance
TC 146
Air quality
ISO/CD
12219-7
Interior air of road vehicles — Part 7: Odour
determination in interior air of road vehicles
and test chamber air of trim components by
olfactory measurements
TC 150
Implants for surgery
2
ISO/CD
14243-4
Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral
joint — Loading and displacement parameters
for wear-testing machines and corresponding
environmental conditions for test
TC 159
Ergonomics
ISO/CD
20685-2
3-D scanning methodologies for internationally
compatible anthropometric databases — Part
2: Evaluation protocol of surface shape and
repeatability of relative landmark positions
TC 161
Control and protective devices for gas
and/or oil burners and appliances
ISO
23550:2011/
CD Amd 1
Safety and control devices for gas burners and
gas-burning appliances — General requirements — Amendment 1
TC 171
Document management applications
ISO/CD 22938
Document management — Electronic content/
document management (CDM) data interchange format
TC 172
Optics and photonics
ISO/CD
14490-5
Optics and optical instruments — Test methods for telescopic systems — Part 5: Test
methods for transmittance
TC 194
Biological evaluation of medical
devices
ISO/DTR
10993-33
Biological evaluation of medical devices —
Supplement to ISO 10993-3 — Guidance on
tests to evaluate genotoxicity — Part 33:
TC 199
Safety of machinery
ISO/CD 19353
Safety of machinery — Fire prevention and
protection
TC 201
Surface chemical analysis
ISO/DTS
18507
Surface Chemical Analysis - Technical Specification for the use of Total Reflection X-ray
Fluorescence spectroscopy in biological and
environmental analysis
ISO/CD 17109
Surface chemical analysis — Depth profiling
— A method for sputter rate determination in
X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass
spectrometry sputter depth profiling using
multi-layer thin films
TC 204
Intelligent transport systems
ISO/CD
14827-3
Intelligent transport systems — Data interfaces
between centres for transport information and
control systems — Part 3: Data interfaces between centres for intelligent transport systems
(ITS) using XML
TC 215
Health informatics
ISO/DTR
14639-2
Health informatics — Capacity-based eHealth
architecture roadmap — Part 2: Architectural
components and maturity model
TC 224
Service activities relating to drinking
water supply systems and wastewater
systems - Quality criteria of the service
and performance indicators
ISO/CD 24521
Basic on-site domestic wastewater services
TC 229
Nanotechnologies
ISO/DTR
17302
Nanotechnologies — Framework for identifying
vocabulary development for nanotechnology
applications in human healthcare
TC 257
General technical rules for determination of energy savings in renovation
projects, industrial enterprises and
regions
ISO Update, Supplement to ISO Focus -- November 2013
ISO/CD 17741
General technical rules for measurement,
calculation and verification of energy savings
of projects
(Revision of ISO 11970:2001)
ISO/DIS 11972
*
Corrosion-resistant cast steels
for general applications
2014-01-04
JTC 1
Information technology
ISO/IEC
10646/PDAM 1
Information technology — Universal Coded
Character Set (UCS) — Amendment 1: Nushu,
Tamil supplement, and other characters
ISO/IEC
10373-6:2011/
DAmd 7
Identification cards — Test methods — Part 6:
Proximity cards — Amendment 7: Frame with
error correction
ISO/IEC
15693-3:2009/
PDAM 2
Identification cards — Contactless integrated
circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment
2: Clarification of use of Data Elements
ISO/IEC
15693-3:2009/
PDAM 4
Identification cards — Contactless integrated
circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment
4: Adding security framework
ISO/IEC PDTS
18822
Technical Specification — File System
ISO/IEC CD
16963
Information technology — Digitally recorded
media for information interchange and storage
— Test method for the estimation of lifetime of
optical media for long-term data storage
(Revision of ISO 11972:1998)
ISO/DIS 11973
*
Heat-resistant cast steels and
alloys for general applications
2014-01-04
(Revision of ISO 11973:1999)
ISO/DIS 13520
*
Determination of ferrite content
in austenitic stainless steel
castings
2014-01-04
(Revision of ISO 13520:2002)
ISO/DIS 13521
*
Austenitic manganese steel
castings
2014-01-04
(Revision of ISO 13521:1999)
ISO/DIS
13583-1
*
Centrifugally cast steel and alloy
products — Part 1: General testing and tolerances
2014-01-04
(Revision of ISO 13583-1:2000)
ISO/DIS
13583-2
*
Centrifugally cast steel and
alloy products — Part 2: Heat
resistant materials
2014-01-04
(Revision of ISO 13583-2:2003)
DIS circulated
ISO/DIS 14737
*
Cast non-alloy and low alloy
steels for general applications
2014-01-04
(Revision of ISO 14737:2003)
Period from 01 October to 31 October 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
ISO/DIS 16468
*
They have been submitted to the ISO member bodies for voting by
the date shown.
2014-01-04
(Revision of ISO 16468:2005)
ISO/DIS 19960
* Available in English only
Investment castings (steel, nickel
alloys and cobalt alloys) — General technical requirements
*
Cast steels and alloys with special physical properties
2014-01-04
Vote
terminates
PC 259
ISO/DIS 37500
Guidance on outsourcing
2014-01-08
TC 4
ISO/DIS 21107
Rolling bearings
*
TC 6
ISO/DIS
12625-9
Rolling bearings and spherical plain bearings — Search
structure for electronic media —
Characteristics and performance
criteria identified by attribute
vocabulary
(Revision of ISO 21107:2004)
TC 20
ISO/DIS
14085-1
Outsourcing
*
(Revision of ISO 19960:2005)
2014-01-08
ISO/DIS
14085-2
ISO/DIS
14085-3
ISO/DIS
14085-4
Aircraft and space vehicles
*
*
*
*
Paper, board and pulps
*
Tissue paper and tissue products — Part 9: Determination of
ball burst strength
2014-03-18
ISO/DIS
14085-5
*
(Revision of ISO 12625-9:2005)
TC 17
ISO/DIS 11970
ISO/DIS
14085-6
Steel
*
Specification and approval of
welding procedures for production welding of steel castings
ISO Update, Supplement to ISO Focus -- November 2013
2014-03-04
TC 22
*
Aerospace series — Hydraulic
filter elements — Test methods
— Part 1: Test sequence
2014-01-24
Aerospace series — Hydraulic
filter elements — Test methods
— Part 2: Conditioning
2014-01-24
Aerospace series — Hydraulic
filter elements — Test methods
— Part 3: Filtration efficiency
and retention capacity
Aerospace series — Hydraulic
filter elements — Test methods
— Part 4: Verification of collapse/burst pressure rating
Aerospace series — Hydraulic
filter elements — Test methods
— Part 5: Resistance to flow
fatigue
Aerospace series — Hydraulic
filter elements — Test methods
— Part 6: Initial cleanliness level
2014-01-24
2014-01-24
2014-01-24
2014-01-24
Road vehicles
3
ISO/DIS
11451-3.2
*
TC 23
ISO/DIS
9635-4
TC 43
Road vehicles — Vehicle test
methods for electrical disturbances from narrowband
radiated electromagnetic energy
— Part 3: On-board transmitter
simulation
(Revision of ISO 11451-3:2007)
ISO/DIS 1683
Agricultural irrigation equipment
— Irrigation valves — Part 4: Air
valves
ISO/DIS
16283-2
*
TC 28
ISO/DIS
6743-4
TC 44
*
ISO/DIS
8502-2
ISO/DIS
8502-12
TC 45
ISO/DIS 5772
ISO/DIS 13363
Coated abrasives — Flap wheels
with shaft — Amendment 1
*
*
*
Paints and varnishes — Determination of the percentage volume
of non-volatile matter — Part
3: Determination by calculation
from the non-volatile-matter content determined in accordance
with ISO 3251, the density of the
coating material and the density
of the solvent in the coating
material
(Revision of ISO 23811:2009)
Preparation of steel substrates
before application of paints
and related products — Tests
for the assessment of surface
cleanliness — Part 2: Laboratory determination of chloride on
cleaned surfaces
(Revision of ISO 8502-2:2005)
Preparation of steel substrates
before application of paints and
related products — Tests for the
assessment of surface cleanliness — Part 12: Field method for
the titrimetric determination of
water-soluble ferrous ions
(Revision of ISO 8502-12:2003)
TC 38
4
*
*
TC 46
2014-03-18
ISO/DIS 21127
ISO/DIS 17316
Rubber and Plastic Hoses and
Hose Assemblies for measured fuel dispensing systems
— Specification
(Revision of ISO 5772:1998)
Rubber and plastics hoses for
marine-engine wet-exhaust
systems — Specification
2014-03-11
2014-01-15
2014-01-10
2014-01-10
Information and
documentation
*
ISO/DIS 384
*
Laboratory glass and plastics
ware — Principles of design
and construction of volumetric
instruments
(Revision of ISO 384:1978)
ISO/DIS 3819
*
Laboratory glassware — Beakers
ISO/DIS
4796-1
*
TC 48
2014-03-04
2014-03-04
Information and documentation
— A reference ontology for the
interchange of cultural heritage
information
(Revision of ISO 21127:2006)
Information and documentation — International standard link
identifier (ISLI)
2014-01-10
Laboratory equipment
(Revision of ISO 3819:1985)
Laboratory glassware — Bottles
— Part 1: Screw-neck bottles
(Revision of ISO 4796-1:2000)
ISO/DIS 16496
Terminology and other
language and content
resources
TC 58
Interpreting — Guidelines for
community interpreting
ISO/DIS
11119-4
Textiles — Determination of antifungal activity of textile products
— Part 2: Plate count method
Mechanical joining — Destructive testing of joints — Specimen
dimensions and test procedure
for cross-tension testing of
single joints
*
Textiles
*
Acoustics — Field measurement
of sound insulation in buildings
and of building elements — Part
2: Impact sound insulation
(Revision of ISO 140-7:1998, ISO
140-14:2004)
(Revision of ISO 13363:2004,
ISO 13363:2004/Cor 1:2008)
Paints and varnishes
*
2014-03-04
Rubber and rubber
products
2014-03-04
2013-12-22
ISO/DIS
13629-2
*
2014-01-22
TC 37
ISO/DIS
13611.2
Lubricants, industrial oils and
related products (class L) —
Classification — Part 4: Family H
(Hydraulic systems)
(Revision of ISO 6743-4:1999)
Acoustics — Preferred reference
values for acoustical and vibratory levels
Welding and allied
processes
2013-12-10
Small tools
*
TC 35
ISO/DIS
3233-3
ISO/DIS 16237
Petroleum products and
lubricants
TC 29
ISO
3919:2005/
DAmd 1
Radio frequency identification
of animals — Standardization of
injection sites for different animal
species — Part 1: Companion
animals (cats and dogs)
*
2014-01-17
(Revision of ISO 9635-4:2006)
ISO/DIS
15639-1.2
*
(Revision of ISO 1683:2008)
Tractors and machinery for
agriculture and forestry
*
Acoustics
2014-01-24
TC 59
*
Laboratory glassware — Vacuum-jacketed vessels for heat
insulation
Gas cylinders
*
Gas cylinders — Refillable composite gas cylinders and tubes
— Design, construction and
testing — Part 4: Fully wrapped
fibre reinforced composite gas
cylinders and tubes up to 450 L
with load-sharing welded metallic liners
2014-01-16
Buildings and civil engineering works
ISO Update, Supplement to ISO Focus -- November 2013
ISO/DIS
16757-1
*
TC 67
ISO/DIS
19901-5
*
ISO/DIS
8178-8
*
*
Reciprocating internal combustion engines — Exhaust emission
measurement — Part 7: Engine
family determination
(Revision of ISO 8178-7:1996)
2014-01-05
Reciprocating internal combustion engines — Exhaust emission
measurement — Part 8: Engine
group determination
(Revision of ISO 8178-8:1996)
2014-01-05
Guidelines for the simplified
design of structural reinforced
concrete for buildings
Eye and face protection — Sunglasses and related eyewear —
Part 2: Filters for direct observation of the sun
ISO/DIS
16900-8
*
Respiratory protective devices —
Methods of test and test equipment — Part 8: Measurement of
RPD air flow rates of assisted
filtering RPD
ISO/DIS
11660-2
Cranes
*
ISO/DIS
10406-2
*
*
TC 76
ISO/DIS
1135-4
*
Fibre-reinforced polymer (FRP)
reinforcement of concrete —
Test methods — Part 1: FRP
bars and grids
(Revision of ISO 10406-1:2008)
Fibre-reinforced polymer (FRP)
reinforcement of concrete — Test
methods — Part 2: FRP sheets
*
Cranes — Experimental determination of crane performance
— Part 2: Structural competence
under static loading
ISO/DIS
4306-3
*
Cranes — Vocabulary — Part 3:
Tower cranes
(Revision of ISO 4306-3:2003,
ISO 4306-3:2003/Amd 1:2011)
ISO/DIS 17096
*
ISO/DIS
3826-4
TC 94
*
TC 106
ISO/DIS 4823
Dentistry
*
2014-01-10
2014-01-08
(Revision of ISO 4823:2000,
ISO 4823:2000/Cor 1:2004, ISO
4823:2000/Amd 1:2007)
TC 110
ISO/DIS
22915-12
Industrial trucks
*
2014-01-08
TC 130
ISO/DIS 16760
ISO/DIS 10762
*
Plastics collapsible containers for human blood and blood
components — Part 4: Aphaeresis blood bag systems with
integrated features
Personal safety -- Protective clothing and
equipment
ISO Update, Supplement to ISO Focus -- November 2013
2014-03-04
2014-03-11
Industrial trucks — Verification
of stability — Part 12: Industrial
variable-reach trucks handling
freight containers of 6 m (20 ft)
length and longer
2014-01-24
Graphic technology
*
TC 131
2014-03-04
Dentistry — Elastomeric impression materials
2014-03-11
Transfusion, infusion
and injection, and blood
processing equipment for
medical and pharmaceutical use
Transfusion equipment for medical use — Part 5: Transfusion
sets for single use with pressure
infusion apparatus
(Revision of ISO 1135:1977, ISO
1135-4:2012)
Cranes — Safety — Load lifting
attachments
2014-01-29
Graphic technology — Prepress
data exchange — Preparation
and visualization of RGB images
to be used in RGB-based graphics arts workflows
2014-01-29
Fluid power systems
*
(Revision of ISO 1135-4:2012)
ISO/DIS
1135-5
2014-01-10
2014-01-10
(Revision of ISO 10406-2:2008)
Transfusion equipment for medical use — Part 4: Transfusion
sets for single use, gravity feed
Cranes — Access, guards and
restraints — Part 2: Mobile
cranes
ISO/DIS
11662-2
(Revision of ISO 15673:2005)
ISO/DIS
10406-1
2014-01-15
(Revision of ISO 11660-2:1994)
Concrete, reinforced
concrete and pre-stressed
concrete
*
*
TC 96
2014-03-04
Internal combustion
engines
TC 71
ISO/DIS 15673
Petroleum and natural gas industries — Specific requirements
for offshore structures — Part 5:
Weight control during engineering and construction
(Revision of ISO 19901-5:2003)
ISO/DIS
12312-2
2014-01-10
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
TC 70
ISO/DIS
8178-7
Product Data for Building
Services System Models — Part
1: Concepts, architecture and
model
TC 145
Hydraulic fluid power — Mounting dimensions for cylinders, 10
MPa (100 bar) series [Revision of
ISO 10762: 1997]
(Revision of ISO 10762:1997)
2014-01-16
Graphical symbols
ISO
7001:2007/
DAmd 52
*
ISO
7001:2007/
DAmd 53
*
ISO
7001:2007/
DAmd 54
*
Graphical symbols — Public
information symbols — Amendment 52: Symbol PI CF 012:
Foot care or podiatry
Graphical symbols — Public
information symbols — Amendment 53: Symbol PI CF 015:
Barber or hair salon
Graphical symbols — Public
information symbols — Amendment 54: Symbol PI CF 016:
Cinema
2014-01-18
2014-01-18
2014-01-18
5
ISO
7001:2007/
DAmd 55
*
ISO
7001:2007/
DAmd 56
*
ISO
7001:2007/
DAmd 58
*
ISO
7001:2007/
DAmd 59
*
ISO
7001:2007/
DAmd 60
*
ISO
7001:2007/
DAmd 62
*
ISO
7001:2007/
DAmd 63
*
ISO
7001:2007/
DAmd 64
*
ISO
7001:2007/
DAmd 65
*
ISO
7001:2007/
DAmd 66
*
ISO
7001:2007/
DAmd 67
*
ISO
7001:2007/
DAmd 72
*
ISO
7001:2007/
DAmd 73
*
ISO
7010:2011/
DAmd 172
ISO
7010:2011/
DAmd 179
ISO
7010:2011/
DAmd 180
TC 154
6
*
*
*
Graphical symbols — Public
information symbols — Amendment 55: Symbol PI CF 017: Car
repair workshop
Graphical symbols — Public
information symbols — Amendment 56: Symbol PI CF 018:
Wireless LAN
Graphical symbols — Public
information symbols — Amendment 58: Symbol PI PF 067:
Pedestrian underpass
Graphical symbols — Public
information symbols — Amendment 59: Symbol PI PF 068:
Baggage delivery
Graphical symbols — Public
information symbols — Amendment 60: Symbol PI TF 037:
Security check
Graphical symbols — Public
information symbols — Amendment 62: Symbol PI PB 008:
Surveillance camera
Graphical symbols — Public
information symbols — Amendment 63: Symbol PI PF 069:
Baggage assistant
Graphical symbols — Public
information symbols — Amendment 64: Symbol PI PF 070:
Embassy
Graphical symbols — Public
information symbols — Amendment 65: Symbol PI TC 017:
Beach
Graphical symbols — Public
information symbols — Amendment 66: Symbol PI TC 018:
Planetarium
Graphical symbols — Public
information symbols — Amendment 67: Symbol PI TF 030:
Baggage weighing
Graphical symbols — Public
information symbols — Amendment 72: Symbol PI TF 035:
Water taxi
ISO/DIS
15000-5
2014-01-18
2014-01-18
2014-01-18
ISO/DIS 17248
*
*
*
2014-01-18
2014-01-18
TC 159
ISO/DIS
9241-392
2014-01-18
ISO
10240:2004/
DAmd 1
Prosthetics — Quantification of
physical parameters of ankle
foot devices and foot units
*
Small craft — Owner's manual
— Amendment 1
2014-01-22
2014-03-25
Surface chemical analysis
*
Surface chemical analysis —
Scanning-probe microscopy
— Determination of cantilever
normal spring constants
2014-01-16
Intelligent transport
systems
*
TC 211
ISO/DIS 19103
2014-01-22
Small craft
TC 204
2014-01-22
2014-01-22
Prosthetics and orthotics
2014-01-18
ISO
14906:2011/
DAmd 1
Corrosion of metals and alloys
— Test method for high temperature corrosion testing of metallic
materials by embedding in salt,
ash, or other solids
*
TC 201
ISO/DIS 11775
Corrosion of metals and alloys
— Test method for high temperature corrosion testing of metallic
materials by immersing in molten
salt or other liquids under static
conditions
Ergonomics of human-system
interaction — Part 392: Ergonomic recommendations for the
reduction of visual fatigue from
stereoscopic images
TC 188
2014-01-18
Corrosion of metals and alloys — Test method for high
temperature corrosion testing of
metallic materials by application
of a deposit of salt, ash, or other
substances
*
TC 168
2014-01-18
2014-01-08
Ergonomics
2014-01-18
ISO/DIS 16955
Electronic Business Extensible
Markup Language (ebXML)
— Part 5: Core Components
Specification
(Revision of ISO/TS 150005:2005, ISO/TS 15000-5:2005/
Amd 1:2011)
Corrosion of metals and
alloys
2014-01-18
Graphical symbols — Safety
colours and safety signs — Registered safety signs — Amendment 172: Safety sign F016: Fire
blanket
Processes, data elements and documents in
commerce, industry and
administration
ISO/DIS 17224
ISO/DIS 17245
2014-01-18
Graphical symbols — Safety
colours and safety signs — Registered safety signs — Amendment 180: Safety sign W040:
Warning; Roof avalanche
TC 156
2014-01-18
Graphical symbols — Public
information symbols — Amendment 73: Symbol PI CF 010 Rev:
Conference facilities or meeting
room
Graphical symbols — Safety
colours and safety signs — Registered safety signs — Amendment 179: Safety sign W039:
Warning; Falling ice
*
Electronic fee collection — Application interface definition for
dedicated short-range communication — Amendment 1
2014-03-11
Geographic information/
Geomatics
*
Geographic information — Conceptual schema language
2014-01-05
(Revision of ISO/TS 19103:2005)
2014-01-22
ISO/DIS 19109
*
Geographic information — Rules
for application schema
2014-03-11
(Revision of ISO 19109:2005)
2014-01-22
TC 215
ISO/HL7 DIS
10781.2
Health informatics
*
Electronic Health Record-System
Functional Model, Release 2.0
(EHR FM)
2014-01-08
ISO Update, Supplement to ISO Focus -- November 2013
(Revision of ISO/HL7
10781:2009)
ISO/HL7 DIS
16527.2
*
TC 228
ISO/DIS 13009
Personal Health Record System
Functional Model, Release 1
(PHR-S FM)
(Revision of ISO/IEC
24775:2011)
*
Information technology — Storage management — Part 4:
Block Devices
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-5
*
Information technology — Storage management — Part 5: File
systems
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-6
*
Information technology — Storage management — Part 6:
Fabric
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-7
*
Information technology — Storage management — Part 7: Host
Elements
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-8
*
Information technology — Storage management — Part 8:
Media Libraries
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
17629
*
Information technology — Office equipment — Method for
measuring first print out time for
digital printing devices
2013-12-04
Tourism and related
services
*
ISO/IEC DIS
24775-4
Beaches — Criteria to render the
service
2014-01-21
ISO/DIS 18065
*
JTC 1
ISO/IEC DIS
13157-1
ISO/IEC DIS
19369
Natural Protected Areas - Tourist
services for public use provided
by Natural Protected Areas
Authorities - Requirements
2014-01-08
Information technology
*
*
Information technology — Telecommunications and information exchange between systems
— NFC Security — Part 1: NFCSEC NFCIP-1 security services
and protocol
(Revision of ISO/IEC
13157-1:2010)
2014-01-03
Information technology —
NFCIP-2 test methods
2014-01-03
ISO/IEC DIS
19395
*
Smart Data Centre Resource
Monitoring and Control
2014-01-22
ISO/IEC DIS
10646
*
Information technology — Universal Coded Character Set
(UCS)
*
Software Engineering —
Metamodel for Development
Methodologies
*
Information technology — Office
equipment — Method for measuring digital printing productivity
— Revision draft
(Revision of ISO/IEC
24734:2009)
ISO/IEC
13818-1:2013/
DAmd 5
*
Information technology — Generic coding of moving pictures
and associated audio information — Part 1: Systems —
Amendment 5: Transport of MVC
depth video sub-bitstream and
extensions to support HEVC low
delay coding mode
ISO/IEC
14496-5:2001/
DAmd 32
*
Information technology — Coding of audio-visual objects
— Part 5: Reference software
— Amendment 32: Reference
software multi-resolution 3D
mesh compression
ISO/IEC
1449618:2004/DAmd
1
*
ISO/IEC
21000-8:2008/
DAmd 3
*
ISO/IEC
23008-2/
DAmd 1
*
2014-01-08
(Revision of ISO/IEC
24744:2007, ISO/IEC
24744:2007/Amd 1:2010)
ISO/IEC DIS
8484
*
2014-01-15
(Revision of ISO/IEC
10646:2012, ISO/IEC
10646:2012/Amd 1:2013)
ISO/IEC DIS
24744
ISO/IEC DIS
24734
Information technology — Magnetic stripes on savingsbooks
2014-01-24
(Revision of ISO/IEC 8484:2007)
ISO/IEC
18013-3:2009/
DAmd 2
*
Information technology — Personal identification — ISOcompliant driving licence — Part
3: Access control, authentication and integrity validation —
Amendment 2: Extended Access
Control v1
ISO/IEC DIS
24775-1
*
Information technology — Storage management — Part 1:
Overview
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-2
*
Information technology — Storage management — Part 2:
Common Architecture
(Revision of ISO/IEC
24775:2011)
ISO/IEC DIS
24775-3
*
Information technology — Storage management — Part 3:
Common Profiles
ISO Update, Supplement to ISO Focus -- November 2013
Information technology — Coding of audio-visual objects —
Part 18: Font compression and
streaming — Amendment 1:
Updated semantics of decoderSpecificInfo and font data
description for ISOBMFF
Information technology — Multimedia framework (MPEG-21)
— Part 8: Reference software
— Amendment 3: Contract
Expression Language (CEL) and
Media Contract Ontology (MCO)
Reference Software
Information technology — High
efficiency coding and media
delivery in heterogeneous
environments
2014-01-29
2014-01-17
2014-01-17
2014-01-17
2014-01-17
— Part 2: High efficiency video
coding — Amendment 1: Range
extensions
7
ISO/IEC
23008-2/
DAmd 2
*
Information technology — High
efficiency coding and media
delivery in heterogeneous
environments
ISO/FDIS
16127
2014-01-17
ISO/FDIS
16691
— Part 2: High efficiency video
coding — Amendment 2: Multiview extensions
ISO/IEC DIS
23008-5
*
Information technology — High
efficiency coding and media
delivery in heterogeneous
environments
2014-01-17
*
ISO/IEC
29199-4:2010/
DAmd 1
*
ISO/IEC DIS
18004
*
ISO/IEC DIS
30108-1
*
Information technology — High
efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance
Specification for HEVC
Information technology — JPEG
XR image coding system — Part
4: Conformance testing —
Amendment 1: Additional JPEG
XR conformance test streams
Information technology — Automatic identification and data
capture techniques — QR
Code bar code symbology
specification
(Revision of ISO/IEC
18004:2006)
Information Technology — Biometric Identity Assurance Services — Part 1: BIAS Services
ISO/FDIS
16695
*
*
TC 22
— Part 5: HEVC Conformance
testing and reference software
ISO/IEC DIS
23008-8
*
*
ISO/FDIS
10924-2
*
2014-01-17
TC 28
ISO/FDIS
22854
*
2014-01-05
TC 29
2014-01-04
ISO/FDIS
2351-3
ISO/FDIS
8968-1
ISO/FDIS 6539
*
*
ISO/FDIS 2403
2013-12-10
Milk and milk products — Determination of nitrogen content
— Part 1: Kjeldahl principle and
crude protein calculation
(Revision of ISO 5549:1978, ISO
8968-1:2001, ISO 8968-2:2001)
2013-12-18
Cinnamon (Cinnamomum zeylanicum Blume) — Specification
*
Textiles — Cotton fibres — Determination of micronaire value
2013-12-26
ISO/FDIS
13935-1
Asset management — Management systems — Requirements
2013-12-08
8
Assembly tools for screws
and nuts — Machine-operated
screwdriver bits — Part 3:
Screwdriver bits for hexagon
socket screws
(Revision of ISO 2351-3:2002)
(Revision of ISO 2403:1972)
Asset management — Overview,
principles and terminology
Aircraft and space vehicles
2013-12-11
Textiles
*
2013-12-08
TC 20
Liquid petroleum products
— Determination of hydrocarbon types and oxygenates in
automotive-motor gasoline —
Multidimensional gas chromatography method
(Revision of ISO 22854:2008)
2013-12-22
Asset management
Asset management — Management systems — Guidelines for
the application of ISO 55001
Road vehicles — Circuit breakers — Part 2: User's guide
(Revision of ISO 6539:1997)
Vote
terminates
*
Road vehicles — Fuse-links —
Part 2: User guidelines
Food products
TC 38
ISO/FDIS
55002
2013-12-08
Small tools
*
* Available in English only
*
Space environment (natural and
artificial) — Geomagnetic reference models
Petroleum products and
lubricants
These Final draft International Standards have been submitted to the
ISO member bodies for formal approval by the date shown
ISO/FDIS
55001
2013-12-26
2013-12-26
Period from 01 October to 31 October 2013
*
Space systems — Thermal
control coatings for spacecraft
— General requirements
(Revision of ISO 8820-2:2005)
2014-01-17
FDIS circulated
ISO/FDIS
55000
2013-12-08
Road vehicles
ISO/FDIS
8820-2
TC 34
PC 251
Space systems — Prevention of break-up of unmanned
spacecraft
ISO/FDIS
13935-2
2013-12-08
TC 41
*
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam
rupture using the strip method
(Revision of ISO 13935-1:1999)
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam
rupture using the grab method
(Revision of ISO 13935-2:1999)
2014-01-11
2014-01-11
Pulleys and belts (including
veebelts)
ISO Update, Supplement to ISO Focus -- November 2013
ISO/FDIS 1813
*
TC 43
ISO/FDIS
16283-1
ISO/FDIS 5817
*
ISO/FDIS
10245-2
Acoustics — Field measurement
of sound insulation in buildings
and of building elements — Part
1: Airborne sound insulation
(Revision of ISO 140-4:1998, ISO
140-5:1998, ISO 140-7:1998,
ISO 140-14:2004)
*
*
*
*
*
TC 61
2013-12-04
Resistance welding equipment
— Transformers — General
specifications applicable to all
transformers
(Revision of ISO 5826:1999)
Welding — Fusion-welded
joints in steel, nickel, titanium
and their alloys (beam welding
excluded) — Quality levels for
imperfections
(Revision of ISO 5817:2003, ISO
5817:2003/Cor 1:2006)
*
2013-12-25
2013-12-04
ISO/FDIS
27627
*
TC 89
ISO/FDIS
13608
ISO/FDIS
14857
ISO/FDIS
8600-4
Rubber hoses and hose assemblies for bulk fuel delivery by
truck — Specification
ISO/FDIS
12505-1
2013-12-12
Rubber and plastics gloves
for food services — Limits for
extractable substances
ISO/FDIS
18091
ISO/FDIS
13482
Non-active surgical implants
— Joint replacement implants
— Specific requirements for
knee-joint replacement implants
— Amendment 1
2013-12-04
Thermal performance and
energy use in the built
environment
*
Thermal performance in the built
environment — Determination
of air permeance of building
materials
*
Endoscopes — Medical endoscopes and certain accessories
— Part 4: Determination of maximum width of insertion portion
(Revision of ISO 8600-4:1997)
Optics and photonics
2013-12-22
Assistive products for persons with disability
*
Skin barrier for ostomy aids
— Test methods — Part
1: Size, surface pH and
water-absorbency
2013-12-05
Quality management and
quality assurance
*
TC 184
Quality management systems
— Guidelines for the application of ISO 9001:2008 in local
government
(Revision of IWA 4:2009)
2013-12-26
Automation systems and
integration
*
Robots and robotic devices —
Safety requirements for personal
care robots
2013-12-04
2013-12-03
TC 190
ISO/FDIS
11267
Soil quality
*
Soil quality — Inhibition of reproduction of Collembola (Folsomia
candida) by soil contaminants
2013-12-11
(Revision of ISO 11267:1999)
TC 202
ISO/FDIS
17470
Petroleum and natural gas industries — Aluminium alloy pipe for
use as tubing for wells
2013-12-04
Petroleum and natural gas industries — Aluminium alloy drill pipe
thread connection gauging
2013-12-04
Decorative veneered plywood
2013-12-19
ISO Update, Supplement to ISO Focus -- November 2013
*
TC 176
Single-use sterile rubber surgical
gloves — Specification
Plastics — Determination of
tension-tension fatigue crack
propagation — Linear elastic
fracture mechanics (LEFM)
approach
(Revision of ISO 15850:2002,
ISO 15850:2002/DAmd 1)
Implants for surgery
TC 172
TC 173
Wood-based panels
*
ISO
21536:2007/
FDAmd 1
Rubber and rubber
products
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
*
TC 150
TC 163
Plastics
TC 67
ISO/FDIS
13085
Cranes — Limiting and indicating
devices — Part 2: Mobile cranes
(Revision of ISO 10245-2:1994)
(Revision of ISO 10282:2002,
ISO 10282:2002/Cor 1:2005)
ISO/FDIS
15850
Cranes
*
2013-12-12
2013-12-08
ISO/FDIS
14285
Blockboards and battenboards
2013-12-05
TC 96
(Revision of ISO 2929:2002)
ISO/FDIS
10282
*
2013-12-08
Welding and allied
processes
TC 45
ISO/FDIS 2929
ISO/FDIS
13609
Acoustics
TC 44
ISO/FDIS 5826
Belt drives — V-ribbed belts,
joined V-belts and V-belts
including wide section belts and
hexagonal belts — Electrical
conductivity of antistatic belts:
Characteristics and methods of
test
(Revision of ISO 1813:1998)
Microbeam analysis
*
TC 210
IEC
62366:2007/
FDAmd 1
TC 215
Microbeam analysis — Electron
probe microanalysis — Guidelines for qualitative point analysis
by wavelength dispersive X-ray
spectrometry
(Revision of ISO 17470:2004)
2013-12-05
Quality management and
corresponding general aspects for medical devices
*
Medical devices — Application
of usability engineering to medical devices — Amendment 1
Health informatics
9
ISO/FDIS
18104
ISO/FDIS
20302
*
*
TC 249
ISO/FDIS
17218
Health informatics — Categorial
structures for representation of
nursing diagnoses and nursing
actions in terminological systems
(Revision of ISO 18104:2003)
2013-12-04
Health informatics — Health
cards — Numbering system and
registration procedure for issuer
identifiers
(Revision of ISO 20302:2006)
2013-12-11
New International Standards published between 01 October and 31
October 2013
Traditional chinese
medicine
*
Standards published
* Available in English only
Sterile acupuncture needles for
single use
** French version of standard previously published in English only
2013-12-25
JTC 1
ISO/IEC FDIS
19508
ISO/IEC FDIS
19509
ISO/IEC FDIS
29182-3
Information technology
*
*
*
ISO/IEC FDIS
25063
ISO/IEC
10373-6:2011/
FDAmd 5
Information technology — Object
Management Group — Meta
Object Facility (MOF) Core
Information technology — Object
Management Group XML Metadata Interchange (XMI)
Information technology — Sensor networks: Sensor Network
Reference Architecture (SNRA)
— Part 3: Reference architecture
views
Systems and software engineering — Systems and software
product Quality Requirements
and Evaluation (SQuaRE) —
Common Industry Format (CIF)
for usability: Context of use
description
*
ISO/IEC
24727-3:2008/
FDAmd 1
*
ISO/IEC
24727-4:2008/
FDAmd 1
*
ISO/IEC FDIS
27036-1
*
ISO/IEC FDIS
27038
*
ISO/IEC FDIS
29147
*
Identification cards — Test
methods — Part 6: Proximity
cards — Amendment 5: Bit rates
of 3fc/4, fc, 3fc/2 and 2fc from
PCD to PICC
Price
group
2013-12-03
Metric series wires for measuring
screw threads
C
TC 6
2013-12-12
2013-12-16
ISO
5636-3:2013
ISO
5636-4:2013
ISO
5636-5:2013
2013-12-03
*
*
*
ISO
8791-2:2013
ISO
16290:2013
ISO
16404:2013
2013-12-03
Information technology — Security techniques — Specification
for digital redaction
ISO
6622-2:2013
ISO
6550-3:2013
2013-12-03
ISO
28741:2013
Paper and board — Determination of
air permeance (medium range) — Part
3: Bendtsen method
G
Paper and board — Determination of
air permeance (medium range) — Part
4: Sheffield method
G
Paper and board — Determination of
air permeance (medium range) — Part
5: Gurley method
F
Paper and board — Determination of
roughness/smoothness (air leak methods) — Part 2: Bendtsen method
H
Aircraft and space vehicles
*
*
TC 22
ISO
11898-6:2013
10
Paper, board and pulps
TC 20
Identification cards — Integrated circuit card programming
interfaces — Part 4: Application
programming interface (API) administration — Amendment 1: .
Information technology — Security techniques — Vulnerability
disclosure
Screw threads
ISO
16239:2013
2013-12-03
Identification cards — Integrated circuit card programming
interfaces — Part 3: Application
interface — Amendment 1: .
Information technology — Security techniques — Information
security for supplier relationships — Part 1: Overview and
concepts
TC 1
Space systems — Definition of the
Technology Readiness Levels (TRLs)
and their criteria of assessment
F
Space systems — Programme
management — Requirements
management
H
Road vehicles
*
*
*
*
Internal combustion engines — Piston
rings — Part 2: Rectangular rings made
of steel
Road vehicles — Sheath-type glowplugs with conical seating and their
cylinder head housing — Part 3: M10
glow-plugs
Road vehicles — Spark-plugs and
their cylinder head housings — Basic
characteristics and dimensions
Road vehicles — Controller area
network (CAN) — Part 6: High-speed
medium access unit with selective
wake-up functionality
L
E
N
G
ISO Update, Supplement to ISO Focus -- November 2013
ISO
14229-5:2013
ISO
13052:2013
*
*
TC 23
ISO
12934:2013
ISO
9912-2:2013
Road vehicles — Trailers up to 3,5 t —
Requirements for jockey wheels and
drawbar supports
TC 42
H
C
Tractors and machinery for agriculture and forestry
*
*
TC 27
ISO 334:2013
Road vehicles — Unified diagnostic
services (UDS) — Part 5: Unified diagnostic services on Internet Protocol
implementation (UDSonIP)
Tractors and machinery for agriculture and forestry — Basic types
— Vocabulary
Agricultural irrigation equipment —
Filters for microirrigation — Part 2:
Strainer-type filters and disc filters
D
E
Small tools
ISO
7388-3:2013
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD,
AF, UC, UD, UF, JD and JF
ISO
10649-2:2013
ISO
10649-3:2013
ISO
10649-4:2013
*
*
Cutting tool data representation and
exchange — Part 301: Concept for
the design of 3D models based on
properties according to ISO/TS 133993: Modelling of thread-cutting taps,
thread-forming taps and thread-cutting
dies
Cutting tool data representation and
exchange — Part 302: Concept for the
design of 3D models based on properties according to ISO/TS 13399-3:
Modelling of solid drills and countersinking tools
Cutter arbors with parallel key and
tenon drive — Part 2: Dimensions and
designation of tool holders with taper
interface with flange contact surface
Cutter arbors with parallel key and
tenon drive — Part 3: Dimensions and
designation of tool holders with 7/24
taper for automatic tool changer
Cutter arbors with parallel key and
tenon drive — Part 4: Dimensions and
designation of tool holders with 7/24
taper without automatic tool changer
TC 34
Food products
ISO
11816-1:2013
Milk and milk products — Determination of alkaline phosphatase activity
— Part 1: Fluorimetric method for milk
and milk-based drinks
ISO/TS
17919:2013
ISO 5985:2002
Microbiology of the food chain —
Polymerase chain reaction (PCR) for
the detection of food-borne pathogens
— Detection of botulinum type A, B, E
and F neurotoxin-producing clostridia
TC 44
Welding and allied processes
ISO
10225:2013
Gas welding equipment — Marking for
equipment used for gas welding, cutting and allied processes
TC 46
Information and documentation
ISO
27729:2012/
Cor 1:2013
Information and documentation —
International standard name identifier
(ISNI) — Technical Corrigendum 1
TC 54
Essential oils
ISO 9841:2013
Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
E
M
ISO Update, Supplement to ISO Focus -- November 2013
TC 58
Gas cylinders
ISO 3807:2013
Gas cylinders — Acetylene cylinders —
Basic requirements and type testing
ISO
12209:2013
ISO/TR
16115:2013
Gas cylinders — Outlet connections
for gas cylinder valves for compressed
breathable air
*
TC 61
T
ISO
10123:2013
A
free
C
ISO
22514-2:2013
C
TC 85
C
ISO/ASTM
51939:2013
Gas cylinders — Classification of imperfections arising during the manufacture of seamless steel and aluminium
alloy gas cylinders
J
L
Plastics
*
TC 69
Adhesives — Determination of shear
strength of anaerobic adhesives using
pin-and-collar specimens
D
Applications of statistical
methods
*
Statistical methods in process management — Capability and performance — Part 2: Process capability
and performance of time-dependent
process models
L
Nuclear energy, nuclear technologies, and radiological
protection
*
Practice for blood irradiation dosimetry
G
ISO
21483:2013
Determination of solubility in nitric acid
of plutonium in unirradiated mixed
oxide fuel pellets (U, Pu) O2
G
TC 86
T
Animal feeding stuffs — Determination
of ash insoluble in hydrochloric acid
Foodstuffs — Principles of selection
and criteria of validation for varietal
identification methods using specific
nucleic acid
N
N
D
ISO
13495:2013
Imaging materials — Digital hard copy
for medical imaging — Methods of
measuring permanence
D
Solid mineral fuels — Determination of
total sulfur — Eschka method
TC 29
ISO/TS 13399302:2013
*
Solid mineral fuels
*
D
ISO/TS 13399301:2013
ISO
18939:2013
Photography
ISO 163581:2013/Cor
1:2013
C
Refrigeration and
air-conditioning
*
Air-cooled air conditioners and air-toair heat pumps — Testing and calculating methods for seasonal performance
factors — Part 1: Cooling seasonal
performance factor — Technical Corrigendum 1
free
G
11
ISO 163582:2013/Cor
1:2013
*
TC 92
ISO
12468-1:2013
Air-cooled air conditioners and air-toair heat pumps — Testing and calculating methods for seasonal performance
factors — Part 2: Heating seasonal
performance factor — Technical Corrigendum 1
ISO
13163:2013
free
ISO
14189:2013
Fire safety
*
External exposure of roofs to fire —
Part 1: Test method
M
ISO
12468-2:2013
*
External exposure of roofs to fire —
Part 2: Classification of roofs
C
TC 94
Personal safety -- Protective
clothing and equipment
ISO
17249:2013
Safety footwear with resistance to
chain saw cutting
J
*
ISO
16191:2013
TC 150
ISO
16087:2013
Water quality — Lead-210 — Test
method using liquid scintillation
counting
J
Water quality — Enumeration of
Clostridium perfringens — Method using membrane filtration
F
Water quality — Determination of the
toxic effect of sediment on the growth
behaviour of Myriophyllum aquaticum
L
Implants for surgery
*
Implants for surgery — Roentgen
stereophotogrammetric analysis for the
assessment of migration of orthopaedic implants
TC 164
Mechanical testing of metals
ISO 7802:2013
Metallic materials — Wire — Wrapping
test
F
A
ISO
16900-11:2013
ISO/TS
16976-5:2013
Respiratory protective devices —
Methods of test and test equipment —
Part 11: Determination of field of vision
*
F
ISO 2291513:2012/Cor
1:2013
TC 123
ISO
7902-1:2013
Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks
with mast — Technical Corrigendum 1
Hydrodynamic plain journal bearings
under steady-state conditions —
Circular cylindrical bearings — Part 1:
Calculation procedure
TC 131
Fluid power systems
ISO
1179-1:2013
Connections for general use and fluid
power — Ports and stud ends with
ISO 228-1 threads with elastomeric
or metal-to-metal sealing — Part 1:
Threaded ports
ISO
1179-2:2013
Connections for general use and fluid
power — Ports and stud ends with
ISO 228-1 threads with elastomeric
or metal-to-metal sealing — Part 2:
Heavy-duty (S series) and light-duty
(L series) stud ends with elastomeric
sealing (type E)
TC 135
ISO
10878:2013
Air quality
ISO
25597:2013
Stationary source emissions — Test
method for determining PM2,5 and
PM10 mass in stack gases using cyclone samplers and sample dilution
12
Accessible design — Application of
braille on signage, equipment and
appliances
TC 189
Ceramic tile
ISO
10545-9:2013
Ceramic tiles — Part 9: Determination
of resistance to thermal shock
Workplace atmospheres — Pumps for
personal sampling of chemical and
biological agents — Requirements and
test methods
D
B
ISO
13007-2:2013
*
Ceramic tiles — Grouts and adhesives
— Part 2: Test methods for adhesives
M
C
TC 190
ISO/TS
17073:2013
E
Non-destructive testing — Infrared
thermography — Vocabulary
TC 146
TC 147
ISO
17049:2013
P
N
ISO
13137:2013
Assistive products for persons
with disability
Soil quality
*
Natural gas
ISO
13734:2013
Natural gas — Organic components
used as odorants — Requirements and
test methods
E
E
TC 204
Intelligent transport systems
ISO/TR
14806:2013
Intelligent transport systems — Public
transport requirements for the use of
payment applications for fare media
P
Electronic fee collection — Charging
performance — Part 2: Examination
Framework
X
ISO/TS
17444-2:2013
*
V
ISO/TS
17931:2013
P
Soil quality — Determination of trace
elements in aqua regia and nitric acid
digests — Graphite furnace atomic absorption spectrometry method (GFAAS)
TC 193
Non-destructive testing
*
Microscopes — Screw threads for
objectives and related nosepieces
TC 173
free
Plain bearings
*
*
C
Industrial trucks
*
ISO 8038:2013
Optics and photonics
Respiratory protective devices — Human factors — Part 5: Thermal effects
H
TC 110
TC 172
*
Intelligent transport systems — Extension of map database specifications for
Local Dynamic Map for applications of
Cooperative ITS
XA
Water quality
ISO Update, Supplement to ISO Focus -- November 2013
ISO/TS
18234-1:2013
ISO/TS
18234-2:2013
ISO/TS
18234-7:2013
ISO/TS
18234-9:2013
ISO/TS
18234-10:2013
*
*
*
*
*
Intelligent transport systems — Traffic and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format — Part 1:
Introduction, numbering and versions
(TPEG1-INV)
Intelligent transport systems — Traffic and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format — Part 2:
Syntax, semantics and framing structure (TPEG1-SSF)
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Methods of test for ceramic coatings
— Determination of fracture strain
Fine ceramics (advanced ceramics,
advanced technical ceramics) — Light
source for testing semiconducting photocatalytic materials used under indoor
lighting environment
TC 207
Environmental management
ISO/TS
14067:2013
Greenhouse gases — Carbon footprint
of products — Requirements and
guidelines for quantification and
communication
*
Geometrical product specifications
(GPS) — Dimensional and geometrical
tolerances for moulded parts — Part
2: Rules
ISO/IEC TR
20000-10:2013
*
*
*
*
T
ISO/IEC TR
90006:2013
*
ISO/IEC
14443-4:2008/
Amd 3:2013
*
F
D
ISO/IEC
29121:2013
*
U
U
Timber
*
ISO/IEC TR
20000-5:2013
ISO/IEC
29155-2:2013
Dimensional and geometrical
product specifications and
verification
TC 218
ISO 8965:2013
ISO/IEC
15026-1:2013
ISO/IEC
14776333:2013
*
ISO/IEC
29101:2013
*
ISO/IEC
30111:2013
ISO/IEC
11160-2:2013
Logging industry — Technology —
Terms and definitions
*
*
A
TC 229
ISO/TS
80004-6:2013
Nanotechnologies
*
ISO/IEC TR
20943-5:2013
Nanotechnologies — Vocabulary —
Part 6: Nano-object characterization
*
M
TC 262
ISO/TR
31004:2013
ISO/IEC TR
20943-6:2013
Risk management
*
Risk management — Guidance for the
implementation of ISO 31000
R
IULTCS
International Union of Leather
Technologists and Chemists
Societies
ISO Update, Supplement to ISO Focus -- November 2013
ISO/IEC
13250-3:2013
C
Information technology
*
Q
X
ISO
14604:2012
ISO/TS
8062-2:2013
ISO/IEC TR
29181-4:2013
Intelligent transport systems — Traffic and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format — Part 9:
Traffic event compact (TPEG1-TEC)
Fine ceramics
TC 213
JTC 1
X
Intelligent transport systems — Traffic and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format — Part
10: Conditional access information
(TPEG1-CAI)
Leather — Chemical tests — Determination of tan content in synthetic
tanning agents
C
Intelligent transport systems — Traffic and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format — Part 7:
Parking information (TPEG1-PKI)
TC 206
ISO
14605:2013
ISO
17489:2013
*
*
Information technology — Future
Network — Problem statement and
requirements — Part 4: Mobility
L
Systems and software engineering
— Systems and software assurance —
Part 1: Concepts and vocabulary
M
Information technology — Service
management — Part 5: Exemplar implementation plan for ISO/IEC 20000-1
S
Information technology — Service
management — Part 10: Concepts and
terminology
K
Systems and software engineering
— Information technology project performance benchmarking framework —
Part 2: Requirements for benchmarking
Information technology — Guidelines
for the application of ISO 9001:2008 to
IT service management and its integration with ISO/IEC 20000-1:2011
M
W
Identification cards — Contactless
integrated circuit cards — Proximity
cards — Part 4: Transmission protocol
— Amendment 3: Bit rates of 3fc/4, fc,
3fc/2 and 2fc from PCD to PICC
XZ
Information technology — Digitally
recorded media for information interchange and storage — Data migration
method for DVD-R, DVD-RW, DVDRAM, +R, and +RW disks
L
Information technology — Small
Computer System Interface (SCSI) —
Part 333: SCSI Stream Commands - 3
(SSC-3)
XC
Information technology — Security
techniques — Privacy architecture
framework
T
Information technology — Security
techniques — Vulnerability handling
processes
F
Information technology — Office
equipment — Minimum information to
be included in specification sheets —
Printers — Part 2: Class 3 and Class 4
printers
Information technology — Procedures
for achieving metadata registry content
consistency — Part 5: Metadata mapping procedure
Information technology — Procedures
for achieving metadata registry content
consistency — Part 6: Framework for
generating ontologies
J
G
G
Information technology — Topic Maps
— Part 3: XML syntax
M
13
Standards confirmed
The following International Standards are confimred for a five year
period:
TC 6
Paper, board and pulps
ISO 2144:1997
(reconfirmed)
ISO 4046-1:2002
(reconfirmed)
ISO 4046-2:2002
(reconfirmed)
ISO 4046-3:2002
(reconfirmed)
ISO 4046-4:2002
(reconfirmed)
ISO 4046-5:2002
(reconfirmed)
ISO 6587:1992
(reconfirmed)
ISO 187:1990
(reconfirmed)
ISO 8226-2:1990
(reconfirmed)
ISO 9932:1990
(reconfirmed)
ISO 13821:2002
(reconfirmed)
ISO 22414:2004
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 10096:1997
(reconfirmed)
ISO 11:1987
(reconfirmed)
ISO 45:1990
(reconfirmed)
ISO 1023:1974
(reconfirmed)
ISO 2964:1985
(reconfirmed)
ISO 3323:1987
(reconfirmed)
ISO 5887:1981
(reconfirmed)
ISO 7314:2002
(reconfirmed)
ISO 7319:1992
(reconfirmed)
ISO 7320:1992
(reconfirmed)
ISO 9538:1996
(reconfirmed)
ISO 12333:2000
(reconfirmed)
ISO 12334:2000
(reconfirmed)
ISO 16031-2:2003
(reconfirmed)
TC 22
Road vehicles
ISO 22241-3:2008
TC 23
Tractors and machinery for agriculture
and forestry
ISO 6814:2009
(reconfirmed)
ISO 749:1977
(reconfirmed)
ISO 771:1977
(reconfirmed)
ISO 5507:2002
(reconfirmed)
ISO 5511:1992
(reconfirmed)
ISO 8892:1987
(reconfirmed)
ISO 9167-1:1992
(reconfirmed)
ISO 4174:1998
(reconfirmed)
ISO 8981:1993
(reconfirmed)
ISO 11050:1993
(reconfirmed)
ISO 14864:1998
(reconfirmed)
TC 36
Cinematography
ISO 1223:2003
(reconfirmed)
ISO 1793:2005
(reconfirmed)
TC 38
Textiles
ISO 4880:1997
(reconfirmed)
ISO 105-A04:1989
(reconfirmed)
ISO 105-A05:1996
(reconfirmed)
ISO 105-C09:2001
(reconfirmed)
ISO 9866-1:1991
(reconfirmed)
ISO 9866-2:1991
(reconfirmed)
ISO 920:1976
(reconfirmed)
ISO 2646:1974
(reconfirmed)
ISO 2916:1975
(reconfirmed)
ISO 3073:1975
(reconfirmed)
TC 42
Photography
ISO 3772:2000
(reconfirmed)
ISO 5655:2000
(reconfirmed)
ISO 9378:1993
(reconfirmed)
ISO 10348:1993
(reconfirmed)
ISO 18922:2003
(reconfirmed)
ISO 18935:2005
(reconfirmed)
TC 47
Chemistry
ISO 910:1977
(reconfirmed)
ISO 2197:1972
(reconfirmed)
ISO 2199:1972
(reconfirmed)
ISO 2460:1973
ISO 2461:1973
ISO 2462:1973
ISO 2463:1973
(reconfirmed)
ISO 2466:1973
ISO 2992:1974
ISO 2993:1974
ISO 8082-1:2009
ISO 8084:2003
(reconfirmed)
ISO 11169:1993
(reconfirmed)
ISO 7293:1997
(reconfirmed)
ISO 8893:1997
(reconfirmed)
ISO 10726:1992
(reconfirmed)
TC 27
Solid mineral fuels
ISO 616:1995
(reconfirmed)
TC 31
Tyres, rims and valves
ISO 3739-2:1992
(reconfirmed)
TC 34
Food products
ISO 658:2002
(reconfirmed)
ISO 729:1988
(reconfirmed)
14
ISO 735:1977
ISO 3199:1975
(reconfirmed)
ISO 3332:1975
ISO 3423:1975
ISO 3425:1975
(reconfirmed)
ISO 3426:1975
(reconfirmed)
ISO 3427:1976
(reconfirmed)
ISO 3704:1976
(reconfirmed)
ISO 3705:1976
(reconfirmed)
ISO 6796:1981
(reconfirmed)
ISO 7103:1982
(reconfirmed)
ISO 7105:1985
ISO 7106:1985
ISO Update, Supplement to ISO Focus -- November 2013
ISO 7108:1985
TC 173
Assistive products for persons with
disability
ISO 7109:1985
TC 58
Gas cylinders
ISO 7176-7:1998
(reconfirmed)
ISO 407:2004
(reconfirmed)
ISO 7176-15:1996
(reconfirmed)
TC 61
Plastics
ISO 16840-1:2006
ISO 14853:2005
(reconfirmed)
TC 174
Jewellery
ISO 17422:2002
(reconfirmed)
ISO 10713:1992
(reconfirmed)
ISO 20965:2005
(reconfirmed)
ISO/TR
11211:1995
ISO 845:2006
ISO 11596:2008
ISO 1663:2007
TC 68
Financial services
ISO 11568-4:2007
ISO 19092:2008
TC 180
Solar energy
ISO 9553:1997
(reconfirmed)
ISO 9808:1990
(reconfirmed)
TC 184
Automation systems and integration
TC 69
Applications of statistical methods
ISO 13448-1:2005
(reconfirmed)
ISO/TS
10303-35:2003
TC 85
Nuclear energy, nuclear technologies,
and radiological protection
ISO
10303-109:2004
(reconfirmed)
ISO 6527:1982
(reconfirmed)
(reconfirmed)
ISO
10303-204:2002
(reconfirmed)
ISO 7385:1983
ISO 8107:1993
(reconfirmed)
(reconfirmed)
ISO 10979:1994
(reconfirmed)
ISO
10303-218:2004
TC 119
Powder metallurgy
ISO 15926-1:2004
(reconfirmed)
ISO 4491-2:1997
(reconfirmed)
ISO 18629-1:2004
(reconfirmed)
ISO 4491-3:1997
(reconfirmed)
ISO/TS
18876-1:2003
TC 127
Earth-moving machinery
ISO 6683:2005
(reconfirmed)
ISO/TS
18876-2:2003
ISO 10968:2004
(reconfirmed)
TC 224
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
ISO 161-2:1996
(reconfirmed)
ISO 11922-2:1997
(reconfirmed)
ISO 8283-4:1992
(reconfirmed)
ISO 4433-1:1997
(reconfirmed)
ISO 4433-2:1997
(reconfirmed)
ISO 4433-3:1997
Service activities relating to drinking
water supply systems and wastewater
systems - Quality criteria of the service
and performance indicators
ISO 24510:2007
ISO 24511:2007
ISO 24512:2007
TC 226
Materials for the production of primary
aluminium
(reconfirmed)
ISO 806:2004
(reconfirmed)
ISO 4433-4:1997
(reconfirmed)
ISO 6257:2002
(reconfirmed)
ISO 580:2005
(reconfirmed)
ISO 10236:1995
(reconfirmed)
ISO 9854-2:1994
(reconfirmed)
ISO 12989-1:2000
(reconfirmed)
ISO 15908:2002
(reconfirmed)
ISO 14422:1999
(reconfirmed)
ISO 9393-1:2004
(reconfirmed)
TC 228
Tourism and related services
TC 159
Ergonomics
ISO 24803:2007
ISO 10075-3:2004
(reconfirmed)
JTC 1
ISO 14738:2002
(reconfirmed)
ISO/TR 9547:1988
ISO 15537:2004
(reconfirmed)
TC 160
Glass in building
ISO/IEC TR
10034:1990
Information technology
ISO/IEC TR
10176:2003
ISO/TS
29584:2012
TC 172
Optics and photonics
ISO
10110-11:1996
(reconfirmed)
ISO 10109-4:2001
(reconfirmed)
ISO 14132-5:2008
ISO 21094:2008
ISO 15253:2000
(reconfirmed)
ISO 16034:2002
(reconfirmed)
ISO Update, Supplement to ISO Focus -- November 2013
ISO/IEC TR
10182:1993
ISO/IEC
10967-3:2006
ISO/IEC TR
11017:1998
ISO/IEC
13568:2002
(reconfirmed)
ISO/IEC
13816:2007
15
ISO/IEC TR
14369:1999
2-9
Porto (Portugal)
TC 176/SC 1
Quality management
and quality assurance/Concepts and
terminology
3-8
Gyeongju (Korea, Republic of)
TC 184/SC 4
Automation systems
and integration/Industrial data
4
Berlin (Germany)
TC 41/SC 3
Pulleys and belts
(including veebelts)/
Conveyor belts
4-8
Sydney
(Australia)
TC 34/SC 17
Food products/Management systems for
food safety
4-8
Porto (Portugal)
TC 176/SC 2
Quality management
and quality assurance/Quality systems
4-8
Porto (Portugal)
TC 176/SC 3
Quality management
and quality assurance/Supporting
technologies
4-8
Bangkok
(Thailand)
TC 217
Cosmetics
4-9
Perros-Guirec
(France)
JTC 1
Information
technology
4-9
Porto (Portugal)
TC 176
Quality management
and quality assurance
5
Berlin (Germany)
TC 41/SC 4
Pulleys and belts
(including veebelts)/
Synchronous belt
drives
6
Berlin (Germany)
TC 41/SC 1
Pulleys and belts
(including veebelts)/
Friction
6-8
Paris (France)
TC 275
Sludge recovery,
recycling, treatment
and disposal
7
Vienna (Austria)
TC 83/SC 4
Sports and other recreational facilities and
equipment/Snowsports equipment
7
Okinawa (Japan)
TC 201/SC 1
Surface chemical
analysis/Terminology
7
Okinawa (Japan)
TC 201/SC 2
Surface chemical
analysis/General
procedures
7
Okinawa (Japan)
TC 201/SC 9
Surface chemical
analysis/Scanning
probe microscopy
7-9
Okinawa (Japan)
TC 201
Surface chemical
analysis
** Provisional
8
Delft
(Netherlands)
TC 92/SC 1
Fire safety/Fire initiation and growth
October-November 2013
8
Shenzen (China)
TC 160
Glass in building
8
Shenzen (China)
TC 160/SC 1
Glass in building/Product
considerations
8
Shenzen (China)
TC 160/SC 2
Glass in building/Use
considerations
8
Okinawa (Japan)
TC 201/SC 3
Surface chemical analysis/Data
management and
treatment
8
Okinawa (Japan)
TC 201/SC 4
Surface chemical analysis/Depth
profiling
8
Okinawa (Japan)
TC 201/SC 7
Surface chemical
analysis/Electron
spectroscopies
ISO/IEC
15145:1997
(reconfirmed)
ISO 4232-1:1979
(reconfirmed)
Standards withdrawn
Period from 01 October to 31 October 2013
TC 34
Food products
ISO 4052:1983
(replaced by )
TC 38
Textiles
ISO/TR
14510:1997
(replaced by )
TC 44
Welding and allied processes
ISO 17655:2003
(replaced by )
TC 85
Nuclear energy, nuclear technologies,
and radiological protection
ISO 12184:1994
(replaced by ISO 21483:2013)
TC 213
Dimensional and geometrical product
specifications and verification
ISO/TR 5460:1985
(replaced by )
JTC 1
Information technology
ISO/IEC TR
15026-1:2010
(replaced by ISO/IEC 15026-1:2013)
Meeting calendar
(update at 01 October 2013)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
28-1
Bali (Indonesia)
TC 45
Rubber and rubber
products
28-1
Cambridge,
Massachusetts
(USA)
TC 121/SC 2
Anaesthetic and respiratory equipment/
Airways and related
equipment
28-2
Berlin (Germany)
TC 130
Graphic technology
TC 45/SC 3
Rubber and rubber
products/Raw materials (including latex)
for use in the rubber
industry
November 2013
1
16
Bali (Indonesia)
ISO Update, Supplement to ISO Focus -- November 2013
8
Washington, D.C
(USA)
TC 227
Springs
9
Okinawa (Japan)
TC 201/SC 8
Surface chemical
analysis/Glow discharge spectroscopy
11
Mexico City
(Mexico)
TC 113/SC 1
Hydrometry/Velocity
area methods
11-15 Mexico City
(Mexico)
TC 94/SC 15
Personal safety -Protective clothing
and equipment/
Respiratory protective
devices
11-15 Tokyo (Japan)
TC 98
Bases for design of
structures
11-15 Mexico City
(Mexico)
TC 113
Hydrometry
12-13 Guangzhou
(China)
TC 137
Footwear sizing designations and marking
systems
13
Tokyo (Japan)
TC 110/SC 1
Industrial trucks/General terminology
13
Mexico City
(Mexico)
TC 113/SC 2
Hydrometry/Flow
measurement
structures
14
Tokyo (Japan)
TC 110/SC 2
Industrial trucks/
Safety of powered
industrial trucks
14
Mexico City
(Mexico)
TC 113/SC 5
Hydrometry/Instruments, equipment and data
management
14
Mexico City
(Mexico)
TC 113/SC 6
Hydrometry/Sediment
transport
14-15 Redlands (USA)
TC 211
Geographic information/
Geomatics
12-13 Berlin (Germany)
15
Tokyo (Japan)
TC 110
Industrial trucks
15
Mexico City
(Mexico)
TC 113/SC 8
Hydrometry/Ground
water
15
Belo Horizonte
(Brazil)
TC 229
Nanotechnologies
18
Berlin (Germany)
TC 20/SC 4
Aircraft and space
vehicles/Aerospace
fastener systems
18
Mumbai (India)
TC 135/SC 8
Non-destructive testing/Infrared thermography for non-destructive testing
18-20 Berlin (Germany)
TC 20
Aircraft and space
vehicles
18-21 Exton (USA)
TC 84
Devices for administration of medicinal
products and intravascular catheters
TC 31/SC 9
Tyres, rims and
valves/Valves for tube
and tubeless tyres
TC 212
Clinical laboratory
testing and in vitro diagnostic test systems
February 2014
TC 269
Railway applications
3-5
19-20 Tokyo (Japan)
*
19-21 Singapore
(Singapore)
20-22 Tokyo (Japan)
*
27
Milan (Italy)
TC 221
Geosynthetics
30
Miami (USA)
TC 44/SC 6
Welding and allied
processes/Resistance
welding and allied
mechanical joining
December 2013
ISO Update, Supplement to ISO Focus -- November 2013
4-5
Clearwater (USA)
TC 83/SC 5
Sports and other
recreational facilities
and equipment/Ice
hockey equipment
and facilities
4-5
La Plaine StDenis (France)
TC 279
Innovation process:
interaction, tools and
methods
5
Brussels
(Belgium)
TC 94/SC 3
Personal safety -Protective clothing
and equipment/Foot
protection
5-6
Paris (France)
TC 197
Hydrogen
technologies
9-11
Montreux
(Switzerland)
PC 284
Management system
for quality of private
security company
(PSC) operations Requirements with
guidance
10
St. Hubert, Quebec (Canada)
TC 20/SC 13
Aircraft and space
vehicles/Space data
and information transfer systems
11
Berlin (Germany)
TC 35/SC 12
Paints and varnishes/
Preparation of steel
substrates before application of paints and
related products
11
Frankfurt
(Germany)
TC 270
Plastics and rubber
machines
11-12 Kyoto (Japan)
TC 281
Fine Bubble
Technology
12-13 New York (USA)
TC 171/SC 2
Document management applications/
Application issues
TC 276
Biotechnology
TC 121/SC 3
Anaesthetic and respiratory equipment/
Lung ventilators and
related equipment
TC 223
Societal security
TC 69/SC 4
Applications of statistical methods/Applications of statistical
methods in process
management
15-16 Geneva
(Switzerland)
CSC/SPC
Council/Strategy and
Policy Committee
(CSC/SPC)
23
TC 17/SC 3
Steel/Steels for structural purposes
TC 282
Water re-use
TC 71
Concrete, reinforced
concrete and prestressed concrete
TC 12
Quantities and units
TC 172/SC 4
Optics and photonics/
Telescopic systems
*
*
*
16-20 Winterthur
(Switzerland)
January 2014
12-17 Cape Town
(South Africa)
13-16 New Delhi (India)
*
Paris (France)
23-24 Tokyo (Japan)
28-31 Sydney
(Australia)
*
30-31 Berlin (Germany)
St. Petersburg (Russian
Federation)
10-11 Paris (France)
*
TC 44/SC 3
Welding and allied
processes/Welding
consumables
10-14 Paris (France)
**
TC 58/SC 4
Gas cylinders/Operational requirements
for gas cylinders
17
10-14 Nairobi (Kenya)
TC 285
Clean cookstoves
and clean cooking
solutions
TC 120/SC 3
Leather/Leather
products
12-14 Milan (Italy)
TC 120
Leather
13
Milan (Italy)
TC 120/SC 1
Leather/Raw hides
and skins, including
pickled pelts
14
Milan (Italy)
TC 120/SC 2
Leather/Tanned
leather
19
Geneva
(Switzerland)
President's
committee
President's
committee
PC 286
Collaborative
business relationship management
-- Framework
PC 280
12
*
Milan (Italy)
19-20 London (United
Kingdom)
*
20-21 Milan (Italy)
21
Berlin (Germany)
21
Stockholm
(Sweden)
*
25-28 Foz do Iguacu
(Brazil)
*
24-27 Warsaw (Poland)
TC 107/SC 4
Metallic and other
inorganic coatings/
Hot dip coatings
(galvanized, etc.)
TC 107
Metallic and other
inorganic coatings
25
Warsaw (Poland)
*
TC 107/SC 3
Metallic and other
inorganic coatings/
Electrodeposited
coatings and related
finishes
25
Warsaw (Poland)
*
TC 107/SC 7
Metallic and other
inorganic coatings/
Corrosion tests
25
Warsaw (Poland)
*
TC 107/SC 8
Metallic and other
inorganic coatings/
Chemical conversion
coatings
Management
Consultancy
(Europe)
**
TC 134
Fertilizers and soil
conditioners
TC 170
Surgical instruments
Paris (France)
**
TC 274
Light and lighting
TC 213
Dimensional and
geometrical product
specifications and
verification
March-April 2014
**
TC 198
Sterilization of health
care products
PC 277
Sustainable
purchasing
1st Quarter 2014
(India)
**
TC 23/SC 18
Tractors and machinery for agriculture and
forestry/Irrigation and
drainage equipment
and systems
(Netherlands)
**
TC 257
General technical
rules for determination of energy savings
in renovation projects,
industrial enterprises
and regions
26-27 Guilin (China)
*
TMB
Technical Management Board
26-28 Kuala Lumpur
(Malaysia)
*
PC 273
Customer contact
centres
**
JTC 1/SC 35
Information technology/User interfaces
*
CSC/FIN
Council/Council
Standing Committee
on Finance (CSC/FIN)
(South America)
23-27 Warsaw (Poland)
31-4
(Australia)
March 2014
6
Virtual
(Unknown)
10-14 (Brazil)
**
11-14 London (United
Kingdom)
11-14 London (United
Kingdom)
11-14 London (United
Kingdom)
13
13
17
TC 94/SC 13
TC 118
*
*
London (United
Kingdom)
*
London (United
Kingdom)
*
TC 118/SC 3
TC 118/SC 6
TC 118/SC 1
TC 118/SC 4
1
Toronto (Canada)
TC 117
Fans
7-10
Vitoria (Brazil)
TC 102
Iron ore and direct
reduced iron
7-11
Delft
(Netherlands)
*
TC 6
Paper, board and
pulps
7-11
Delft
(Netherlands)
*
TC 6/SC 2
Paper, board and
pulps/Test methods
and quality specifications for paper and
board
7-11
Lund (Sweden)
*
TC 92
Fire safety
Compressors and
pneumatic tools,
machines and equipment/Air compressors
and compressed air
systems
7-11
Bologna (Italy)
*
TC 110/SC 4
Industrial trucks/
Rough-terrain trucks
7-11
Amsterdam
(Netherlands)
*
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
Compressors and
pneumatic tools,
machines and
equipment/Process
compressors
8-9
(Japan)
**
TC 199
Safety of machinery
8-10
(Brazil)
**
TC 67/SC 2
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Pipeline transportation systems
8-10
Vitoria (Brazil)
*
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
8-10
Vitoria (Brazil)
*
TC 102/SC 2
Iron ore and direct
reduced iron/Chemical analysis
Personal safety -Protective clothing
and equipment/Protective clothing
Compressors and
pneumatic tools, machines and equipment
Compressors and
pneumatic tools,
machines and equipment/Pneumatic tools
and machines
Compressors and
pneumatic tools,
machines and equipment/Compressed air
treatment technology
Geneva
(Switzerland)
*
President's
committee
President's
committee
17-19 Geneva
(Switzerland)
*
COUNCIL
Council
18
April 2014
ISO Update, Supplement to ISO Focus -- November 2013
8-10
Vitoria (Brazil)
*
TC 102/SC 3
Iron ore and direct
reduced iron/Physical
testing
9-11
Jeju (Korea,
Republic of)
*
TC 112
Vacuum technology
14-15 Hong Kong
(Hong Kong,
China)
*
JTC 1/SC 27
Information technology/IT Security
techniques
15
23-24 (Europe)
**
TC 167
Steel and aluminium
structures
London (United
Kingdom)
15
24-25 Bangkok
(Thailand)
**
TC 34
Food products
West Conshohocken (Philadelphia) (USA)
**
TC 34/SC 2
Food products/Oleaginous seeds and
fruits and oilseed
meals
Berlin (Germany)
Berlin (Germany)
**
TC 34/SC 11
Food products/
Animal and vegetable
fats and oils
Tianjin (China)
**
TC 219
Floor coverings
14-16 Rosslyn (USA)
**
TC 145/SC 2
Graphical symbols/
Safety identification,
signs, shapes, symbols and colours
14-16 Rosslyn (USA)
**
TC 145/SC 3
Graphical symbols/
Graphical symbols for
use on equipment
TC 68
Financial services
*
TC 119/SC 2
Powder metallurgy/
Sampling and testing
methods for powders
(including powders
for hardmetals)
15-20 Berlin (Germany)
*
TC 34/SC 5
Food products/Milk
and milk products
16
*
TC 119
Powder metallurgy
19-23 Milan (Italy)
*
TC 23/SC 13
Tractors and machinery for agriculture
and forestry/Powered
lawn and garden
equipment
19-23 Berlin (Germany)
**
TC 43
Acoustics
19-23 Berlin (Germany)
**
TC 43/SC 1
Acoustics/Noise
19-23 Berlin (Germany)
**
TC 43/SC 2
Acoustics/Building
acoustics
TC 215
Health informatics
West Conshohocken (Philadelphia) (USA)
May 2014
5-9
Washington, D.C
(USA)
*
TC 46
Information and
documentation
5-9
Washington, D.C
(USA)
*
TC 46/SC 9
Information and
documentation/
Identification and
description
5-9
Washington, D.C
(USA)
*
TC 46/SC 11
Information and documentation/Archives/
records management
5-10
St. Petersburg,
Florida (USA)
*
TC 96
Cranes
8
Santa María de
Lamas (Portugal)
**
TC 87
Cork
8
Wiesbaden
(Germany)
*
TC 226
Materials for the
production of primary
aluminium
9-16
London (United
Kingdom)
*
TC 10
Technical product
documentation
9-16
London (United
Kingdom)
*
TC 10/SC 1
Technical product
documentation/Basic
conventions
London (United
Kingdom)
*
TC 10/SC 6
Technical product
documentation/Mechanical engineering
documentation
**
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
TC 68/SC 4
Financial services/
Securities and related
financial instruments
9-16
12-16 Milan (Italy)
12-16 London (United
Kingdom)
12-16 Zhangjiajie
(China)
**
TC 195
Building construction machinery and
equipment
12-16 Zhangjiajie
(China)
**
TC 195/SC 1
Building construction machinery and
equipment/Machinery
and equipment for
concrete work
14-15 Geneva
(Switzerland)
*
COPOLCO
Committee on consumer policy
14-16 Rosslyn (USA)
**
TC 145
Graphical symbols
14-16 Rosslyn (USA)
**
TC 145/SC 1
Graphical symbols/
Public information
symbols
ISO Update, Supplement to ISO Focus -- November 2013
19-23 Karuizawa
(Japan)
20-21 Prague (Czech
Republic)
*
TC 122
Packaging
21-22 (USA)
**
TC 22/SC 3
Road vehicles/Electrical and electronic
equipment
23
*
TC 268
Sustainable development in communities
23-24 Beijing (China)
**
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
26-29 Kyoto (Japan)
*
TC 249
Traditional chinese
medicine
26-30 Tokyo (Japan)
**
TC 20/SC 14
Aircraft and space vehicles/Space systems
and operations
26-30 Treviso (Italy)
*
TC 133
Clothing sizing systems - size designation, size measurement methods and
digital fittings
26-30 Panama
(Panama)
*
TC 207
Environmental
management
27-30 (USA)
**
TC 156
Corrosion of metals
and alloys
Toronto (Canada)
June 2014
1-6
(Sweden)
**
TC 127
Earth-moving
machinery
2-3
Geneva
(Switzerland)
*
CSC/SPC
Council/Strategy and
Policy Committee
(CSC/SPC)
2-5
Delft
(Netherlands)
*
TC 43/SC 3
Acoustics/Underwater acoustics
2-6
Moscow (Russian Federation)
*
TC 85
Nuclear energy,
nuclear technologies, and radiological
protection
19
2-6
Berlin (Germany)
3
Moscow (Russian Federation)
*
Geneva
(Switzerland)
*
TMB
Technical Management Board
16-20 Incheon (Korea,
Republic of)
*
TC 121
Anaesthetic and respiratory equipment
16-20 Baltimore (USA)
*
TC 188
Small craft
17-18 Stockholm
(Sweden)
*
TC 29/SC 10
Small tools/Assembly tools for screws
and nuts, pliers and
nippers
17-18 Berlin (Germany)
*
TC 220
Cryogenic vessels
23-27 Washington, D.C
(USA)
**
TC 34/SC 9
Food products/
Microbiology
23-27 London (United
Kingdom)
*
TC 193
Natural gas
25-26 Paris (France)
4-5
TC 211
Geographic information/
Geomatics
TC 85/SC 2
Nuclear energy,
nuclear technologies,
and radiological protection/Radiological
protection
9-19
Paris (France)
*
TC 213
Dimensional and
geometrical product
specifications and
verification
10
Rio de Janeiro
(Brazil)
*
CSC/FIN
Council/Council
Standing Committee
on Finance (CSC/FIN)
10-12 Rio de Janeiro
(Brazil)
*
GA
General Assembly
13
*
COUNCIL
Council
15-19 Seoul (Korea,
Republic of)
**
TC 150
Implants for surgery
15-19 Wuxi (China)
*
TC 163
Thermal performance
and energy use in the
built environment
15-19 Wuxi (China)
*
TC 205
Building environment
design
17-18 Bangkok
(Thailand)
*
TC 67
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries
*
TC 91
Surface active agents
Düsseldorf
(Germany)
**
TC 17/SC 17
Steel/Steel wire rod
and wire products
18-19 Manchester (United
Kingdom)
**
TC 24/SC 4
London (United
Kingdom)
**
TC 193/SC 1
Natural gas/Analysis
of natural gas
Particle characterization including sieving/Particle
characterization
21
*
TC 254
Safety of amusement
rides and amusement
devices
22-26 Honolulu, Hawaii
(USA)
**
TC 61/SC 10
Plastics/Cellular
plastics
22-26 Durban (South
Africa)
**
TC 146
Air quality
22-26 Durban (South
Africa)
**
TC 146/SC 1
Air quality/Stationary
source emissions
22-26 Durban (South
Africa)
**
TC 146/SC 6
Air quality/Indoor air
24-25 Geneva
(Switzerland)
*
CASCO
Committee on conformity assessment
25
Chicago (USA)
*
TC 79/SC 11
Light metals and their
alloys/Titanium
Stockholm
(Sweden)
**
TC 17/SC 11
Steel/Steel castings
Sydney
(Australia)
**
TC 21/SC 6
Equipment for fire
protection and fire
fighting/Foam and
powder media and
firefighting systems
using foam and
powder
Milan (Italy)
**
TC 39/SC 4
Machine tools/Woodworking machines
Seattle (USA)
**
TC 89
Wood-based panels
**
TC 48
Laboratory equipment
**
TC 17/SC 9
Steel/Tinplate and
blackplate
TC 215
Health informatics
TC 164/SC 5
Mechanical testing of
metals/Fatigue testing
July 2014
1
Geneva
(Switzerland)
President's
committee
President's
committee
7-11
Vienna (Austria)
**
PC 271
Compliance management systems
8-11
Boulder (USA)
*
REMCO
Committee on reference materials
Research Triangle Park (USA)
*
TC 34/SC 16
Food products/Horizontal methods for
molecular biomarker
analysis
3-5
Berlin (Germany)
**
TC 202
Microbeam analysis
3-5
Berlin (Germany)
**
TC 202/SC 1
Microbeam analysis/
Terminology
3-5
Berlin (Germany)
**
TC 202/SC 2
Microbeam analysis/Electron probe
microanalysis
3-5
Berlin (Germany)
**
TC 202/SC 3
Microbeam analysis/
Analytical electron
microscopy
3-5
Berlin (Germany)
**
TC 202/SC 4
Microbeam analysis/
Scanning electron
microscopy (SEM)
September 2014
2-4
7
Rio de Janeiro
(Brazil)
*
8-9
Rio de Janeiro
(Brazil)
8-9
Madrid (Spain)
8-9
8-12
20
Rio de Janeiro
(Brazil)
Rio de Janeiro
(Brazil)
Paris (France)
President's
committee
President's
committee
*
DEVCO
Committee on developing country matters
*
JTC 1/SC 22
Information technology/Programming
languages, their environments and system
software interfaces
*
**
TMB
TC 108/SC 5
Technical Management Board
Mechanical vibration,
shock and condition
monitoring/Condition
monitoring and diagnostics of machine
systems
Amsterdam
(Netherlands)
3rd Quarter 2014
London (United
Kingdom)
2nd-3rd Quarter 2014
Ljimuden
(Netherlands)
October 2014
5-10
Berlin (Germany)
14-16 Suzhou (China)
*
ISO Update, Supplement to ISO Focus -- November 2013
15
Suzhou (China)
*
TC 164/SC 4
Mechanical testing
of metals/Toughness
testing -- Fracture (F),
Pendulum (P), Tear (T)
15-16 Suzhou (China)
*
TC 164/SC 2
Mechanical testing
of metals/Ductility
testing
16
*
TC 164/SC 3
Mechanical testing
of metals/Hardness
testing
Suzhou (China)
16-17 (Czech Republic)
17
Suzhou (China)
**
*
20-24 Nunspeet
(Netherlands)
TC 58/SC 2
TC 164/SC 1
(Portugal)
Food products/Cereals and pulses
**
TC 34/SC 7
Food products/Spices, culinary herbs and
condiments
(Australia)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Brazil)
**
TC 28
Petroleum products
and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and
other language and
content resources
Madrid (Spain)
Month unknown 2014
Mechanical testing
of metals/Uniaxial
testing
Cycles/Cycles and
major sub-assemblies
TC 34/SC 4
2nd Semester 2014
Gas cylinders/Cylinder fittings
TC 149/SC 1
**
20-24 Berlin (Germany)
*
TC 190
Soil quality
(Japan)
**
TC 44
20-24 Berlin (Germany)
*
TC 190/SC 1
Soil quality/Evaluation
of criteria, terminology and codification
Welding and allied
processes
Nairobi (Kenya)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
Seoul (Korea,
Republic of)
**
TC 138/SC 2
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for water
supplies
**
TC 142
Cleaning equipment
for air and other
gases
London (United
Kingdom)
*
TC 213
Dimensional and
geometrical product
specifications and
verification
St. Petersburg,
Florida (USA)
**
TC 115
Pumps
*
COUNCIL
Council
Foshan (China)
**
TC 107
Metallic and other
inorganic coatings
Foshan (China)
**
TC 107/SC 3
Metallic and other
inorganic coatings/
Electrodeposited
coatings and related
finishes
Foshan (China)
**
TC 107/SC 4
Metallic and other
inorganic coatings/
Hot dip coatings
(galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other
inorganic coatings/
Corrosion tests
Foshan (China)
**
TC 107/SC 8
Metallic and other
inorganic coatings/
Chemical conversion
coatings
20-24 Berlin (Germany)
*
TC 190/SC 2
Soil quality/Sampling
20-24 Berlin (Germany)
*
TC 190/SC 3
Soil quality/Chemical methods and soil
characteristics
20-24 Berlin (Germany)
*
TC 190/SC 4
Soil quality/Biological
methods
20-24 Berlin (Germany)
*
TC 190/SC 5
Soil quality/Physical
methods
(United
Kingdom)
20-24 Berlin (Germany)
*
TC 190/SC 7
Soil quality/Soil and
site assessment
February 2015
22-23 Tokyo (Japan)
*
TC 79/SC 2
Light metals and
their alloys/Organic and anodic
oxidation coatings on
aluminium
23-24 (South Africa)
**
TC 178
Lifts, escalators and
moving walks
27-31 Berlin (Germany)
*
TC 264
Fireworks
29
(Europe)
**
TC 79
Light metals and their
alloys
Miami (USA)
**
TC 44/SC 3
Welding and allied
processes/Welding
consumables
Toronto (Canada)
**
TC 59
Buildings and civil
engineering works
(Canada)
**
TC 59/SC 3
Buildings and civil
engineering works/
Functional/user
requirements and
performance in building construction
Toronto (Canada)
**
TC 59/SC 13
Buildings and civil
engineering works/
Organization of
information about
construction works
Tokyo (Japan)
**
TC 79/SC 5
Light metals and their
alloys/Magnesium
and alloys of cast or
wrought magnesium
Prague (Czech
Republic)
**
TC 135
Non-destructive
testing
Paris (France)
**
TC 218
Timber
**
TC 45
Rubber and rubber
products
3-13
March 2015
17-18 Geneva
(Switzerland)
1st Quarter 2015
April 2015
24
Atlanta (USA)
**
TC 6/SC 2
Paper, board and
pulps/Test methods
and quality specifications for paper and
board
25
Atlanta (USA)
**
TC 6
Paper, board and
pulps
(France)
**
TC 29
Small tools
November 2014
3-7
Cape Town
(South Africa)
4th Quarter 2014
ISO Update, Supplement to ISO Focus -- November 2013
21
(France)
**
TC 29/SC 9
Small tools/Tools
with cutting edges
made of hard cutting
materials
(USA)
**
TC 34/SC 15
Food products/Coffee
Tienjin (China)
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
(Europe)
**
TC 215
Health informatics
**
TC 4
Rolling bearings
May 2015
18-22 London (United
Kingdom)
(Switzerland)
**
TC 17/SC 17
(USA)
**
TC 27
Solid mineral fuels
(Finland)
**
TC 44
Welding and allied
processes
(France)
**
TC 45
Rubber and rubber
products
(Russian
Federation)
**
TC 96
Cranes
Berlin (Germany)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
(Japan)
**
TC 142
Cleaning equipment
for air and other
gases
(China)
**
TC 155
Nickel and nickel
alloys
(United
Kingdom)
**
TC 164
Mechanical testing of
metals
(Austria)
**
TC 190
Soil quality
(China)
**
TC 274
Light and lighting
**
TC 213
Dimensional and
geometrical product
specifications and
verification
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
(Australia)
**
TC 178
Lifts, escalators and
moving walks
**
JTC 1
Information
technology
(Russian
Federation)
**
REMCO
Committee on reference materials
(Australia)
**
TC 44
Welding and allied
processes
(China)
**
TC 138/SC 2
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for water
supplies
June 2015
22-26 Göteborg
(Sweden)
Beijing (China)
*
TC 188
Small craft
**
TC 46
Information and
documentation
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics
and instruments
2nd Quarter 2015
(China)
September 2015
*
TC 213
Dimensional and
geometrical product
specifications and
verification
16-18 Seoul (Korea,
Republic of)
*
GA
General Assembly
19
Seoul (Korea,
Republic of)
*
COUNCIL
Council
Vienna (Austria)
**
TC 33
Refractories
**
TC 215
Health informatics
**
TC 126/SC 1
Tobacco and tobacco
products/Physical
and dimensional tests
3rd Quarter 2015
Sao Paulo
(Brazil)
2nd-3rd Quarter 2015
(Europe)
February 2016
(USA)
14-25 Berlin (Germany)
October 2015
Nairobi (Kenya)
**
TC 38
Textiles
Nairobi (Kenya)
**
TC 38/SC 1
Textiles/Tests for
coloured textiles and
colorants
Nairobi (Kenya)
**
TC 38/SC 2
Textiles/Cleansing,
finishing and water
resistance tests
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and
yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and
physical tests for
textile fabrics
Sao Paulo
(Brazil)
**
TC 58/SC 2
Gas cylinders/Cylinder fittings
**
JTC 1
Information
technology
**
TC 126/SC 2
Tobacco and tobacco products/Leaf
tobacco
**
REMCO
Committee on reference materials
Steel/Steel wire rod
and wire products
April 2016
November 2016
(Norway)
Month unknown 2016
November 2015
(China)
2nd Semester 2015
(Europe)
Month unknown 2015
(South Africa)
22
ISO Update, Supplement to ISO Focus -- November 2013