Prospex® Plus XL PinholeTrimless accent downlight for Xicato modules
093+XL-13-XIC-TL
Recessed adjustable pinhole trimless for Xicato led modules
with 70mm diameter reflectors Die cast aluminium
construction.
Seperate die cast plaster kit for seamless installation
Gear driven tilt and rotation.
Trimmed versions available
Hot aiming simplifies focussing while lamp is on. Aiming
remains locked in focus throughout re-lamping.
Deep regressed lamp for minimal glare.
IP44 as standard.
Ref Number:
093+XL-13-XIC-TL-WH
093+XL-13-XIC-TL-BK
White (RAL 9010)
Black (RAL 9005)
Module Type
max output
max wattage
max driver
max depth X
XTM
3000lm
29.3w
1050mA
171mm
XTA
2000lm
26.4w
1050mA
135mm
XTV83
3000lm
29.3w
1050mA
171mm
XTV98
2000lm
26.4w
1050m
135mm
Module Type
max output
max wattage
max driver
max depth X
XTM9
2000lm
30.2w
1050mA
171mm
XTA9
1300lm
24.3w
1050mA
171mm
XTV983
2000lm
30.2w
1050mA
171mm
XTV998
1300lm
24.3w
1050mA
171mm
max. depth is based on max lumen output with the deepest reflector @ ambient temperature 35°C.
other combinations may vary
Lamp quantity
Lamp
Adjustable
Aperture
Overall dimension
Required depth
First fix requirement*
Ceiling cut out
Ceiling thickness
Ingress protection**
Dimming options***
1
Xicato range
45°
75mm Ø
141mm Ø
Height +25mm minimum clearance
Yes
140mm Ø
25mm MAX
IP44
Phase/DALI/1-10v
Cut out 140mm Ø
www.lucent-lighting.com
*First Fix requirement. Luminaire comprised of fixture body with separate front plate and trimless
installation kit, which is to be fitted to the ceiling before skimming. Ensure correct alignment of the
installation kit before the ceiling is skimmed & final assembly (see luminaire installation instructions
for details).
**IP Rating. Tested from underside of the ceiling.
***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it
remains the responsibility of the specifier/installer to check and ensure compatibility of any control
equipment used. Additional cabling may be required depending on the dimming protocol specified.
****Active Heatsink. Fixture with fan cooled heatsink to allow for larger output modules. Requires an
additional 12v supply for the fan. Enssure the correct driver is specified or an additional power supply
is provided.
It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or
withdraw specifications without prior notice.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: [email protected] t: +44 (0)20 8442 0880
Fitting Ref
Europe
China
Quantity
Russia
Lucent Xicato LED Modules with 70mmØ Reflectors
Module Code Builder.
Lumen outputs shaded in gray are available with passive heatsink
for use with this luminaire type. Higher lumen outputs may be
available with active cooling. Please consult Lucent Lighting for
details.
XTM
XTA
XTV
XTM9
XTA9
XTV9
www.lucent-lighting.com
5000lm
4000lm
3000lm
2000lm
CRI
83
83
83
83
83
98
98
98
83
98
83
98
83
98
83
83
83
83
83
98
98
98
83
98
83
98
83
98
1300lm
Type
Lumen output at maximum drive current.
700lm
Module
Colour
Reflector (70Ø)
Beam angle (°)
temp (K)
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
23/42/57
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
10/24/41/64
Max. Drive
Wattage
Current (mA)
700mA
700mA
1050mA
1400mA
1400mA
700mA
1050mA
1050mA
700mA
700mA
1050mA
1050mA
1050mA
1050mA
1400mA
1400mA
700mA
700mA
1050mA
700mA
1050mA
1400mA
700mA
700mA
700mA
1050mA
1050mA
1400mA
(W)
11.7
19.5
29.3
39.1
46.8
15.6
26.4
34.1
11.7
15.6
19.5
26.4
29.3
34.1
39.1
46.8
7.8
15.6
30.2
9.7
24.3
42.1
7.8
9.7
15.6
24.3
30.2
42.1
7
Xictao Module Type
Required.
Heatsink.
(Blank) - Passive Heatsink
AF - Active Heatsink
(Refer to luminaire speification
sheet)
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Colour temperature required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Diameter of reflector (70mm)
Beam angle required.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: [email protected] t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Lucent Xicato LED Modules with 70mmØ Reflectors
Module Code Builder.
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
XTB
5000lm
4000lm
3000lm
2000lm
CRI
95
95
1300lm
Type
Lumen output at maximum drive current.
700lm
Module
Colour
Reflector (70Ø)
Max. Drive
Wattage
temp (K)
27
27
Beam angle (°)
Current (mA)
700mA
1050mA
(W)
15.6
26.4
23/42/57
23/42/57
7
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Diameter of reflector (70mm)
Colour temperature required
Beam angle required.
www.lucent-lighting.com
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: [email protected] t: +44 (0)20 8442 0880
Fitting Ref
Quantity