ADDENDUM FOR CREW TRUCK BODIES
This addendum is for both service bodies.
9. Dimensions and Materials
9.1. The body shall have an inside height of seventy two (72) inches over the full body
width
9.2. Chassis shall be dual wheel with sixty (108) inch cab to axle length (was 60 CA)
9.3. Body material shall be A60-U galvanneal steel
9.4. Body length shall be one hundred eight (132) inches
9.5. Net CA shall be sixty (60) inches, NET CA fifty seven (57) inches
9.6. Body Width shall be ninety four (94) inches
9.7. Floor Width shall be fifty four (54) inches
9.8. Compartment depth shall be twenty (20) inches
9.9. Front height shall be forty five (45) inches
9.10. Rear height shall be forty five (45) inches
9.11. Floor to compartment top shall be twenty six (26) inches
9.12. ALL body components i.e. load area; top; front & rear panels; bulkhead; front & rear
partitions; front, horizontal & rear compartment floors and wheel panels shall be
fourteen (14) gauge galvanneal steel
9.13. Flooring shall be twelve (12) gauge safety tread plate floor over four (4) inch
structural steel channel cross members
This addendum is for the 132” length service body.
13. Base Body
13. Right Side
13.1.1. First vertical (front) shall be forty five (45) inches high by thirty two (32) inches
wide with three (3) adjustable “flat” shelves
13.1.2. Second vertical (behind front) shall be forty five (45) inches high by thirty two (32)
inches wide with three (3) adjustable “flat” shelves (added)
13.1.3. Horizontal shall be twenty one (21) inches high by fifty (50) inches wide with one
(1) centered, fixed, flat shelf. The floor of this compartment shall incorporate
divider trays with five (5) extruded plastic adjustable dividers
13.1.4. Third vertical (rear) shall be forty five (45) inches high by twenty six (26) inches
wide with no shelving
13. Left Side
13.2.1. First (front) shall be forty five (45) inches high by thirty two (32) inches wide with
three (3) adjustable “flat” shelves
13.2.2. Second vertical (behind front) shall be forty five (45) inches high by thirty two (32)
inches wide with three (3) adjustable “flat” shelves (added)
13.2.3. Horizontal shall be twenty one (21) inches high by fifty (50) inches wide with no
shelving
13.2.4. Second (rear) shall be forty five inches high by twenty six (26) inches wide with no
shelves