PS4000 CS-F32-20-2
Solar Surface Pump System
System Overview
Head
Flow rate
max. 30 m
max. 43 m³/h
Technical Data
Controller PS4000
ƒControl inputs for dry running protection, remote control etc.
ƒProtected against reverse polarity, overload and overtemperature
ƒIntegrated MPPT (Maximum Power Point Tracking)
Power
Input voltage
Optimum Vmp*
Motor current
Efficiency
Ambient temp.
Enclosure class
max. 4.0 kW
max. 375 V
> 238 V
max. 15 A
max. 98 %
-30...50 °C
IP54
Motor ECDRIVE 4000 CS-F
ƒMaintenance-free brushless DC motor
ƒPremium materials, stainless steel: AL/AISI 304
Rated power
Efficiency
Motor speed
Insulation class
Enclosure class
3.5 kW
max. 92 %
900...3,300 rpm
F
IPX4
Pump End PE CS-F32-20-2
ƒPremium materials
Pump Unit PU CS-F32-20-2 (Motor, Pump End)
Water temperature
Suction head
max. 70 °C
max. 3 m
Standards
2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995,
IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this
product family. Products are ordered and supplied with the approvals
specific to the market requirements.
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KG
Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,
Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.10.37
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual
products depending on local market requirements and regulations.
PS4000 CS-F32-20-2
Solar Surface Pump System
Pump Chart
Vmp* > 238 V
NPSH
The NPSH (Net Positive Suction Head) is NOT the operating suction head. To calculate the operating suction head please refer to the
installation manual.
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KG
Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,
Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.10.37
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual
products depending on local market requirements and regulations.
PS4000 CS-F32-20-2
Solar Surface Pump System
Dimensions and Weights
Pump Unit [ng]
Controller
H=
H2 =
W1 =
W2 =
W3 =
D=
D1 =
595 mm
563 mm
178 mm
156 mm
116 mm
165 mm
150 mm
Net weight
Controller
9.0 kg
Pump Unit
63 kg
Motor
15 kg
Pump End
48 kg
BERNT LORENTZ GmbH & Co. KG
Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,
Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.10.37
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual
products depending on local market requirements and regulations.