FCC DRY FOOD GRADE CALCIUM CHLORIDE
94 - 97% Pure
The Highest Purity Calcium Chloride Available
Product Data Sheet
General Description
Calcium chloride (CaCl2) from TETRA Chemicals is a white granule with 94% to 97% (anhydrous)
CaCl2 by weight. TETRA’s product is manufactured in the U.S.A., and is a high quality food
grade calcium chloride that meets Food Chemical Codex (FCC), 4th Edition, specifications for
impurity limits and good manufacturing practices (GMP). It also meets American Water Works
Association (AWWA) Standard B550 for water treatment. This is the product of choice for food
processing and packaging applications, and other applications where FDA approval of a briners
grade has not been given.
Applications
TETRA food grade calcium chloride is used primarily in the food and beverage industry to
increase the firmness of fruits and vegetables, preventing breakup during processing and
cooking. In cheese manufacturing, it is added to pasteurized skimmed milk to help coagulate the
curds, increase firmness, and replace calcium lost by heating. The bottling industry uses it to
remove sodium alkalinity from water used in soft drink and beer formulation. Water is then
remineralized to desired levels assuring uniform taste regardless of processing location.
Physical Properties
Appearance .......................................... White granule
Odor ..................................................... None
Density ................................................. Approximately
55 lbs. / cu.ft.
Sieve Analysis ...................................... 4 mesh
100% passing
8 mesh
80 - 100% passing
40 mesh 0 - 6% passing
Chemical Properties
Test
FCC Requirement*
TETRA Product
Calcium Identification
Chloride Identification
Assay (CaCl2) Granular
Arsenic (as As)
Fluoride (as F)
Heavy Metals (as Pb)
Lead (Pb)
Magnesium & Alkali Salts
Acid Insoluble Substances
No Particle per kg sample
> 2mm in any dimension
To Pass Test
To Pass Test
93.0% min.
3 ppm max.
40 ppm max.
20 ppm max.
5 ppm max.
5% max.
0.02% max.
Passes Test
Passes Test
94 - 97%
< 3 ppm
< 40 ppm
< 20 ppm
< 5 ppm
< 1.0%
< 0.02%
To Pass Test
Passes Test
*From Food Chemicals Codex Fourth Edition
Availability
Available in 110 lb. heavy wall fiber drums with internal, sealable PE liner.
Safety and Handling
Protective clothing, rubber gloves, and a face shield or safety goggles are recommended.
Rubber safety boots should also be worn in work areas since calcium chloride can damage
leather. Consult local regulatory authorities for proper disposal of calcium chloride wastes.
Anhydrous CaCl2 should only be handled in areas with proper ventilation. It is recommended that
local exhaust ventilation and respiratory protection be used as appropriate.
Always use cool water (less than 80ºF of 27ºC) when making calcium chloride solutions.
Calcium chloride has a high heat of solution.
Contact your TETRA representative for a copy of the Material Safety Data Sheet.
Technical Support
TETRA food grade calcium chloride product supported by technical assistance from personnel
with extensive product knowledge and experience. Chemical engineers, chemists and lab
technicians are on hand to provide customer support in areas such as process validation,
development and engineering. Twenty-four hour technical assistance is also available by calling:
(800) 327-7817.
Web Site
http://www.tetratec.com
Other Products
Contact your TETRA Chemicals representative for information on additional calcium chloride
products, including 94 - 97% CaCl2 for snow and ice control, brining and industrial applications.
TETRA Chemicals also markets FCC Liquid Food Grade Calcium Chloride and Liquid Calcium
Chloride suitable for wetting salt in de-icing programs and for use in dust control.
The above data are based on tests and experience which TETRA Chemicals believes reliable, and are
supplied for informational purposes only. TETRA Chemicals disclaims any liability for damage or injury
which results from the use of the above data and nothing contained therein shall constitute a guarantee,
warranty or representation (including freedom from patent liability) by TETRA Chemicals with respect to the
data, the product described or its use for any specific purpose, even if that purpose is known to TETRA
Chemicals. For specific information regarding these products, please refer to the respective TETRA
Chemicals Material Safety Data Sheet.
© 1999, 2000 TETRA Chemicals Revision 7/00-1
TETRA Chemicals A Division of TETRA Technologies Inc.
P.O. Box 73087 Houston, Texas 77273
Telephone: (281) 367-1983 Order Processing: (800) 327-7817
Facsimile: (281) 367-6471 USA or (281) 364-4320 Export Orders
E-Mail: [email protected]
TETRA Westlake, LA, Manufacturing Facility ISO 9002 Registered.
BSI Cert. Number FM 38434