English version
English version
Place the CD-ROM in the CD-ROM drive. The installation screen shall start automatically. (see Fig. 1)
LC500030 Wireless PC Card 11G
Advantages
Mobile users
Security
Auto fallback
Compatibility
- you can quickly and easily place it in your laptop, so that you can directly communicate with an existing
wireless network.
- through encryption protection (Wired Equivalent Privacy 64 and 128 bits), your wireless network is protected
against unauthorised access.
- the data transmission automatically switches back if a wireless LAN device does not satisfy the 802.11g
standard, for example. The auto fallback also offers a solution if there are obstacles in the line-of-sight
of the wireless LAN.
- Downwards compatible with 802.11b standard/ use 2.4 GHz frequency band/ compatible with Win98se,
Win2k, and WinXP.
Fig. 1
Key Characteristics
If the installation screen does not automatically start after inserting the CD, you may start the installation process manually by opening the
‘autorun.exe’ file (see Fig. 2).
Extended PCMCIA Type II 32 bits bus
Standard:
IEEE802.11b WLAN Standard & PCMCIA 2.1 and JEIDA 4.2 Standard channels:
o 11 channels: North America
o 13 channels: Europe:
Data speed:
o 54 Mbps/ 11 Mbps/ 5.5 Mbps/ 2 Mbps/ 1 Mbps
Modulation:
direct sequence spread spectrum DSSS/DBPSK/DQPSK/CCK/OFDM
Bit error rate:
1E-5 @ -83 dBm
Output capacity:
12 dBm (typical)
Receiver sensitivity:
-80 dBm Min.
The antenna is built into the card.
Fig. 2
A third option to get the installation screen is to right-click on the CD-ROM icon in Windows Explorer and to select automatic play. (see Fig. 3)
Installation of the 11 G wireless PC card
Before you connect the PC card to your system, first install the software from the CD and follow the instructions. View the following windows and
if necessary copy the settings.
Fig. 3
2
W W W. S W E E X . C O M
3
English version
4
English version
After starting the installation screen, select Installation (see Fig. 4).
Now click YES (see Fig. 6).
Fig. 4
Fig. 6
Now click Next (see Fig. 5).
You can change the installation folder here, if necessary. Now click Next (see Fig. 7).
Fig. 5
Fig. 7
W W W. S W E E X . C O M
5
English version
English version
Now click Next (see Fig. 8).
An image will appear at the bottom right of your window (see Fig. 10).
Fig. 10
You may close the installation window by clicking on the cross on the top right of the screen (see Fig. 11).
Fig. 8
If you want to place a shortcut on your desktop, click YES when the query is made. If you do not select this option, you can always access the
application via the Start menu.
Click “Finish” to complete the installation (see Fig. 9).
Fig. 11
After you have restarted the system, you can place the Wireless PC Card in your notebook. The card will be automatically detected and installed.
In order to check whether the installation has been done properly, you may do the following: In the Configuration screen, select System. You will
find the Device Manager on the Hardware tab.
Fig. 9
6
W W W. S W E E X . C O M
7
English version
You will find the new installed card under Network Adapters. (see Fig. 12)
Fig. 12
For more information, please refer to the manual in the CD-ROM supplied with your product.
8
W W W. S W E E X . C O M