96-01037 / rev 4d / 12-13-11
UQFP Series
Ultra Quiet Fan Panels
®
Middle Atlantic Products
EIA/TIA Compliant
EXCEPTIONAL SUPPORT & PROTECTION™
The UQFP Series Ultra Quiet Fan Panel provides
smart cooling and monitoring where fan noise
is not an option
Features
NEW
UQFP-4RA-I/O
• Quiet operation, 27dB at full speed for 4 fan models, 24dB
at full speed for 2 fan models
• Overtemp and fan failure notification
UQFP-4DRA
• 100 CFM in 4 fan units, 50 CFM in 2 fan units
• Available with commercial and designer inspired
aesthetic treatments
• Fan speeds proportional to temperature of enclosure
to extend fan life, reduce dust and maintenance
UQFP-4
UQFP-4RA
UQFP-4D
• Model available with intake and exhaust units
• Temperature probe with 9’ cord and wire ties included
UQFP-2D
• Compact design occupies only 2 rackspaces
Architects’ and Engineers’ Specifications
Model #s UQFP-2D, UQFP-4D (with display)
EIA compliant 19" Ultra Quiet Fan Panel with local notification display shall be Middle Atlantic
Products model # UQFP-__(2,4)D. Panel shall be constructed of 16-gauge steel, finished in a
durable black powder coat and shall occupy 2 rackspaces. Fans shall activate at 81°F (27°C), reach
full speed at 90°F (32°C) and switch off at 79°F (26°C). Fans shall displace __CFM (50,100) with
a maximum decibel level of __ (24,27) dB (measurements made 1 meter from source, centered
horizontally and vertically). Panel shall provide local status notification of power (green LED), fan
speed (yellow LED) and overtemp (red LED). Fan LED light shall blink relative to fan speed. Rear,
normally open dry switch closure shall provide overtemp alarm signal to compatible, customer
supplied monitoring device. Overtemp alarm set point shall be user definable from 95°-115°F
(35°-46°C). Unit shall remember settings when unplugged or during power outage. Front display
shall provide notification of overtemp and fan fault conditions. Rear, normally open dry switch
closure shall provide fan fault alarm signal to compatible, customer supplied monitoring device.
Alarm set point button shall control Fahrenheit/Celsius setting and overtemp alarm threshold in
1-degree increments. Fan panel shall be GREENGUARD Indoor Air Certified for Children and Schools.
Fan panel shall be RoHS EU Directive 2002/95/EC compliant. Fan panel shall be manufactured by
an ISO 9001 and ISO 14001 registered company. Fan panel shall be warrantied to be free from
defects in materials and workmanship under normal use and conditions for a period of 3 years.
Panel shall include a UL Listed 5V DC power supply and temperature probe with a 9' cord.
Model #s UQFP-4RA, UQFP-4RA-I/O, UQFP-4DRA, UQFP-4RIS (Designer Inspired)
Designer Inspired Ultra Quiet Fan Panel shall be Middle Atlantic Products model #
UQFP-4__. Overtemp alarm set point shall be user definable from 95°-115°F (35°-46°C)
(not available on UQFP-4RA, UQFP-4RA-I/O or UQFP-4RIS). UQFP-4RA-I/O shall include an intake
and exhaust fan. UQFP-4RIS shall be intake only, and connect with an ethernet cable. Overtemp
alarm output shall be normally open dry contact closure for use with customer supplied monitoring
system. Unit shall remember settings when unplugged or during power outage. Fans shall activate
at 81°F (27°C) and operate at speeds proportional to temperature inside enclosure. Fans shall
displace 100 CFM with a maximum decibel level of 27dB (measurements made 1 meter from
source, centered horizontally and vertically). Fan panel shall occupy two rackspaces. Chassis shall
be constructed of 20-gauge steel with 16-gauge aluminum face. Fan panel shall provide local
sensor fault notification (not available on UQFP-4RA or UQFP-4RA-I/O). Fan panel shall be
GREENGUARD Indoor Air Certified for Children and Schools. Fan panel shall be RoHS EU Directive
2002/95/EC compliant. Fan panel shall be manufactured by an ISO 9001 and ISO 14001
registered company. Fan panel shall be warrantied to be free from defects in materials and
workmanship under normal use and conditions for a period of 3 years. Panel shall include a
UL Listed 5V DC power supply and temperature probe with a 9' cord.
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S AVA I L A B L E AT M I D D L E AT L A N T I C . C O M
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
96-01037 / rev 4d / 12-13-11 / UQFP Series
Model #s UQFP-2, UQFP-4
EIA compliant 19" Ultra Quiet Fan Panel shall be Middle Atlantic Products model # UQFP-__(2,4).
Panel shall be constructed of 16-gauge steel, finished in a durable black powder coat and shall
occupy 2 rackspaces. Fans shall activate at 81°F (27°C), reach full speed at 90°F (32°C) and
switch off at 79°F (26°C). Fans shall displace __CFM (50,100) with a maximum decibel level of
__ (24,27) dB (measurements made 1 meter from source, centered horizontally and vertically).
Overtemp alarm set point shall be 100°F (37°C). Panel shall provide local status notification of
power (green LED), fan speed (yellow LED) and overtemp (red LED). Fan LED light shall blink
relative to fan speed. Rear, normally open dry switch closure shall provide overtemp alarm signal
to compatible, customer supplied monitoring device. Fan panel shall be GREENGUARD Indoor Air
Certified for Children and Schools. Fan panel shall be RoHS EU Directive 2002/95/EC compliant.
Fan panel shall be manufactured by an ISO 9001 and ISO 14001 registered company. Fan panel
shall be warrantied to be free from defects in materials and workmanship under normal use and
conditions for a period of 3 years. Panel shall include a UL Listed 5V DC power supply and
temperature probe with a 9' cord.
UQFP Series basic dimensions
UQFP?Series basic
All dimensions in inches [Bracketed dimensions in millimeters]
®
Middle
Atlantic
Middle
AtlanticProducts,
Products Inc.
UQFP-4D shown
UQFP-4D
TOP VIEW
TOP VIEW
Alarm Set Temperature
Interface
Display
Temperature
Probe
Probe
Alarm
A/D
SPI
LinearizationConverter Set Input Interface
Processor
3.33
[85]
Middle Atlantic Products, Inc.
UQFP-4XXX
All dimensions in inches
Microcontroller
Fan Fault
Processor
Fan FaultPulse WidthAlarm
Input Modulation Output
Dry Contact
Outputs
3.33
[85]
Fan Drive
Processor
Rotation
Sensor
Fan Fault
Alarm Output
Fan
Overtemp
Alarm Output
3.12 [79]
Alarm Set Temperature
Interface
Display
Temperature
Probe
FRONT VIEW
3.12
[79]
TOP VIEW
2.63
[67]
Probe
Alarm
SPI
A/D
LinearizationConverter Set Input Interface
Processor
Microcontroller
Fan Fault
Processor
Fan FaultPulse WidthAlarm
Input Modulation Output
Dry Contact
Outputs
Fan Drive
Processor
19.00 [483]
Rotation
Sensor
SIDE VIEW
Fan Fault
Alarm Output
Fan
Overtemp
Alarm Output
power LED (green)
fan LED (yellow)
over temp LED (red)
3.49 [89]
2 rack spaces
alarm set
point
button
(UQFP-2D,
UQFP-4D)
FRONT VIEW
FRONT VIEW
19.00 [483]
REAR VIEW
19.00 [483]
.46
power LED[12]
(green)
fan LED (yellow)
over temp LED (red)
.21
[5]
fan fault alarm output
(UQFP-2D, UQFP-4D)
overtemp alarm output
12 VDC input jack
3.49 [89]
2 spaces
FAN OVER 12VDC
1A
FAULT TEMP
ALARM ALARM
(N.O.) (N.O.)
3.49 [89]
2 spaces
Temperature
Probe
Alarm Set Temperature
Interface
Display
Probe
Alarm
A/D
SPI
LinearizationConverter Set Input Interface
Processor
Display (UQFP-2D, UQFP-4D)
Microcontroller
Fan Fault
Processor
Fan FaultPulse WidthAlarm
Input Modulation Output
Dry Contact
Outputs
Fan Drive
Processor
display (UQFP-2D, UQFP-4D)
Rotation
Sensor
9’ temperature
display (not on
UQFP-4RA)
Fan Fault
Alarm Output
Fan
Overtemp
Alarm Output
REAR VIEW
CONTROL SETTINGS
PUSH
REAR VIEW
Press once to view the current
overtemp alarm setting.
Each additional push will raise
the overtemp alarm
setting
O
by 1 .
fan fault alarm output (UQFP-2D, UQFP-4D)
To toggle between Fahrenheit
and Celsius, press and hold for
3 seconds.
overtemp alarm output
5 VDC input jack
control switch setting
temperature probe
(UQFP-4DRA & UQFP-4DRC only)
FAN OVER 12VDC
1A
FAULT TEMP
ALARM ALARM
(N.O.) (N.O.)
Intake control (no input)
fan fault alarm output
overtemp alarm output
3.49 [89]
2 RACK SPACES
9’ temperature probe
(UQFP-4DRA & UQFP-4RA only)
SIDE VIEW
5VDC input jack
alarm set
point button
(UQFP-2D,
UQFP-4D)
CONTROL SETTINGS
PUSH
Press once to view the current
overtemp alarm setting.
Each additional push will raise
the overtemp alarm
setting
O
by 1 .
To toggle between Fahrenheit
and Celsius, press and hold for
3 seconds.
9’ TEMPERATURE
2.74
[70]
.21
[5]
.02 [0]
Overtemp .46
[12]
Notification
# of
User Fan
Defin- Fail
able ure
2.44
[62]
.5 [13]
SIDE VIEW
Current
Finish
dB
Part #
UQFP-2D
# of
Fans
2
Local LED
•
Local Display
•
Remote
•
User
Definable
Overtemp
Setting
•
UQFP-4D
4
•
•
•
•
UQFP-2
2
•
•
270 mA
50 CFM
24 dB
UQFP-4
4
•
•
510 mA
100 CFM
27 dB
Black Powder coat
UQFP-4DRA
4
560 mA
100 CFM
27 dB
Black brushed anodized
UQFP-4RA
4
•
510 mA
100 CFM
27 dB
Black brushed anodized
UQFP-4RA-I/O
8
•
1.1 A
100 CFM
27 dB
Black brushed anodized
UQFP-4RIS*
4
510 mA
100 CFM
27 dB
Black brushed anodized
Overtemp Notification
•
•
•
Fan Failure
Notification
Local & Remote
Display
•
Sensor Fault
Notification Local
•
Current Draw
at 5 Volts DC
310 mA
Airflow
at Full
Speed
50 CFM
dB level at
Full Speed
24 dB
Finish
Black Powder coat
•
•
560 mA
100 CFM
27 dB
Black Powder coat
Black Powder coat
•
•
*The UQFP-4RIS is an intake panel and can only be used in conjunction with the UQFP-4RA and UQFP-4DRA
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca