SPEC #422-712
T-628(5)
Tractors, Sub Compact Utility
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip
Phone #:
Toll Free #:
Fax #:
Email Address:
STATE OF MINNESOTA
PRICE PAGE
(Typed Response Required)
July, 2012
Titan Machinery Inc.
Andy Bethel
1201 North HWY 59
Marshall, MN 56258
507-532-5783
800-658-2302
507-532-2240
[email protected]
SPEC #
INFORMATION REQUESTED
ANSWER
1.0
Tractor Catalog Section Price List Title:
Farmall Series Compact Tractors
Date & I.D. of Price List
1-Sep-11
Percentage Discount to be applied to Price List
31% Tractors 22% Attachments
1.1
Price for manuals, (service, parts, repair, and operations)
$
450.00
1.2
Price for set of fluid and air filters
$
150.00
2.0
PERFORMANCE/EXTENDED WARRANTY OPTIONS
Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc.
2.1
2.2
(Specify years, miles or hours extended term covers.)
______________________________________________
______________________________________________
$
$
$
93.00
3.0
INSTALLATION - PER HOUR
Installation services may be requested on an "as needed" basis.
See Special Terms and Conditions
4.0
NEW EQUIPMENT RENTAL PROGRAM
If rental programs are available on the new equipment offered, with the option to
purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental
fee paid by the purchaser that will be applied to the purchase price. See Solicitation
Special Terms & Conditions.
Hourly Rental Rate:
Weekly Rental Rate: N/A
Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance
charges are applicable for the actual rental term only,
state the actual interest rate here: ________________
5.0
VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM
See Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price
6.0
$
DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES
% Discount
See Special Terms and Conditions
7.0
DELIVERY STARTING POINT City, State, Zip
Roseau, Theif River Falls, Crookston, Ada, Moorhead, Wahpeton, Fergus Falls,
Elbow Lake, Graceville, Redwood Falls, Marshall, Pipestone, MN
See Special Terms and Conditions - No flat rate allowed
Nearest Titan Machinery Inc.
$
2.50
$*5,&8/785$/(48,30(17
8635,&(/,67
)$50$//Š6(5,(6&203$&775$&7256
3/&$5(9,6,21
())(&7,9(6(37(0%(5
&RS\ULJKW%\
&1+$PHULFD//&
)$50$//Š6(5,(6&203$&775$&7256
7$%/(2)&217(176
&203$&775$&7256
FARMALL 30B AND 35B COMPACT TRACTORS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
1
3
5
FARMALL 40B AND 50B COMPACT TRACTORS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
7
9
11
&203$&775$&7256,03/(0(176$1'$77$&+0(176
L300 LOADERS FOR COMPACT FARMALL B
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
13
15
MW SERIES MOWERS FOR FARMALL B
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
17
18
MW SERIES MID-MOUNTED SIDE DISCHARGE MOWER DECKS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
19
20
MW SERIES MID-MOUNTED REAR DISCHARGE MOWER DECKS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
21
22
RR SERIES REAR MOUNT FINISHING MOWERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
23
25
BR SERIES FRONT MOUNT ROTARY BROOMS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
27
28
30
TL SERIES ROTARY TILLERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
31
33
BM SERIES FRONT MOUNTED BLADES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
35
36
38
BM SERIES FRONT MOUNTED BLADES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
39
40
)$50$//Š6(5,(6&203$&775$&7256
7$%/(2)&217(176
BS SERIES FRONT MOUNT SNOW BLOWERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
41
43
46
BS SERIES REAR MOUNT SNOW BLOWERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
47
48
49
BH SERIES BACKHOES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
51
53
57
RC ROTARY CUTTERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
Factory Supplied Attachments .................................................................................................................
59
62
64
WORK EZ ® DISK HARROW
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
65
66
WORK EZ ® RAKES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
67
68
WORK EZ ® BOX BLADES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
69
70
WORK EZ ® REAR BLADES
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
71
72
WORK EZ ® EZ MATCH
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
73
74
WORK EZ ® BALE CARRIERS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
75
76
WORK EZ ® HAY SPEARS
Standard Features ...................................................................................................................................
Price List ..................................................................................................................................................
77
78
)$50$//Š6(5,(6&203$&775$&7256
7$%/(2)&217(176
PARTS DIVISION SUPPLIED ACCESSORIES - TRACTORS ......................................................................
PARTS DIVISION SUPPLIED ACCESSORIES - LOADERS..........................................................................
PARTS DIVISION SUPPLIED ACCESSORIES - IMPLEMENTS....................................................................
REFERRAL ATTACHMENTS.........................................................................................................................
CASE IH PURCHASED PROTECTION..........................................................................................................
79
89
91
93
95
-T0CH 01
FARMALL 30B AND 35B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
DIESEL ENGINE:
Farmall 30B
Mitsubishi S4L 4 Cyl. Diesel Engine
28.1 Gross Engine hp @ 2600 rpm
23.9 PTO hp @ 2600 rpm (Gear)
22.5 PTO hp @ 2600 rpm (Hydro)
92 cu. in.(1.5L) Displacement
TRANSMISSION OPTIONS:
12 x 12 Synchronized Shuttle Shift
(SSS)
Left-hand, dash mounted,
synchronized shuttle
(4) Synchronized gears
(3) Non-synchronized ranges
Farmall 35B:
Mitsubishi S4L2 4 Cyl. Diesel Engine
38.0 Gross Engine hp @ 2700 rpm
32.2 PTO hp @ 2700 rpm (Gear)
30.3 PTO hp @ 2700 rpm (Hydro)
107 cu. in. (1.8L) Displacement
3-Range Hydrostatic with Cruise Control
and Dual-Pedal direction control for
forward and reverse
HYDRAULIC SYSTEM:
Open Center Hydraulic System
Dual Gear-type Pumps
Implement Pump Capacity:
- Farmall 30B = 8.2 gpm (31.2
- Farmall 35B = 8.6 gpm (32.4
Steering Pump Capacity:
- Farmall 30B = 4.1 gpm (15.6
- Farmall 35B = 4.3 gpm (16.2
Mid-mount Hydraulic Valve &
Joystick (STD)
ALL MODELS:
4 Cylinders
Naturally Aspirated
Under Hood Muffler / Exhaust
Two-stage Dual Element Air Cleaner
Full-flow, Spin-on Oil Filter
8.7 gallon (33L) Fuel Tank
Fuel Filter with water separator
Quick Glow Plug Starting Aid
Flip-up Hood w/ Gas Strut
L/min)
L/min)
L/min)
L/min)
3-POINT LIFT SYSTEM:
Lift Capacity @ 24 in. behind link ends:
1433 lb. (650 kg)
Category I, 3-point Linkage
Position Control Lever
Drop Rate Control Knob
Crank-type Leveling Mechanism
Telescoping Stabilizers
Flexible Link Ends
INSTRUMENT PANEL:
Analog Tachometer
Fuel Gauge
Coolant Temperature Gauge
Hour Meter
Engine Oil Pressure Warning Light
Battery Charge Warning Light
Cold Starting Aid Indicator Light
PTO ON Indicator Light
Parking Brake Indicator Light
Turn Indicator Lights
Hazard Flasher Indicator Lights
High Beam Headlight Indicator
ROPS:
2-Post, Foldable Roll Bar
Seat Belt
ELECTRICAL:
12-volt, 80Ah, 660 CCA Battery
Safety Start Switch
Key Start/Fuel Shutoff
50 amp Alternator
Operator Presence System
-T0CH 01 015 000 12-OCT-11
-T0CH 01
FARMALL 30B AND 35B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
LIGHTING:
(2) Halogen Corner Work Lights
(2) Halogen Headlights
(2) Taillights / Brakelights
(2) Flashing Warning Lights / Turn
Signals
FRONT AXLE:
Four Wheel Drive (MFD)
Fixed Position Rims
45.6 in. (1159 mm) Tread Setting with
R4 tires
PTO:
Rear PTO
- Independent 540 rpm
- Electro-hydraulic engagement
- Flip-up Shield
- Shaft Cap
REAR AXLE:
Flange Type Axle
Reversible Position Rims - R1 tires only
Fixed Position Rims - R3, R4 tires
46.5 in. (1181 mm) Tread Setting with
R4 tires
DRAWBAR:
Swinging
2-Position Extendable
OPERATOR'S AREA:
Contoured Cushion Seat
- Fore / Aft / Height / Weight
Compensating
- Spring Suspension
Deluxe Floor Mat
Foot Throttle
Left Side Step
Left Side Grab Handle
Right Side Cupholder & Tray
REAR DIFFERENTIAL LOCK
STEERING:
Hydrostatic Power Steering
Tilt Steering Column
BRAKES:
Wet Disc
Dual Brake Pedals
Foot-assist Parking Brake Lever
SLOW MOVING VEHICLE EMBLEM
-T0CH 01 015 000 12-OCT-11
-T0CH 01
FARMALL 30B AND 35B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Models
COMMERCIAL
MODEL
FARMALL 30B
TRACTOR
FARMALL 35B
TRACTOR
VERSION
ENGINE POWER
TRACTION
Rops
30 HP
4 WD
9012407P01
$16,113.00
Rops
35 HP
4 WD
9014656P95
$19,035.00
Packet
Farmall B Pack 1
SD_T2810-TRANSMISSION
SD_T4940-FRONT WHEELS AND
TIRES
SD_T4950-REAR WHEELS AND
TIRES
SD_T8270-REAR REMOTES
Description
Weight
Weight
Factory Data
Factory Data
9002897P51
List Price
List Price
$3763.00
Hydrostatic Transmission
25 x 8.50-14 6PR R4
43X16.00-20 R4
1 Remote SDA
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
TRANSMISSION
SD_T2810 TRANSMISSION
720110
12 x 12 Synchro-shuttle
729290
Hydrostatic Transmission
9001231P23
No Charge
$1,599.00
REAR WHEELS AND TIRES
SD_T4950 REAR WHEELS AND TIRES
8332604 11.2 x 24 4PR R1 Ag Bar
8304804 41X14.00-20 4PR R3
8364564 43X16.00-20 R4
8399907 Less rear wheels and tires
9000652P19
9000997P92
9000863P94
$847.00
$1,296.00
$1,122.00
No Charge
-T0CH 01 015 000 12-OCT-11
-T0CH 01
FARMALL 30B AND 35B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
FRONT WHEELS AND TIRES
SD_T4940 FRONT WHEELS AND TIRES
8204604 7 x 14 6PR R1 Ag Bar
8152604 25X8.50-14 4PR R3 T
8266304 25 x 8.50-14 6PR R4
8199907 Less front wheels and tires.
9000254P87
9000254P87
9000332P64
$331.00
$331.00
$432.00
No Charge
HITCH AND DRAWBAR
SD_T8960 3 - POINT LINKAGE-REAR
720902
3-Point Hitch w/ flexlink ends
No Charge
REMOTES
SD_T8270 REAR REMOTES
XT8270X Base Equipment -See Std Featrs
Less Rear Remote
720366
1 Remote SDA
Fits Farmall 30B/35B Gear or Hydro & Farmall 40B/45B Gear
No Charge
9000469P70
$610.00
-T0CH 01 015 000 12-OCT-11
-T0CH 01
FARMALL 30B AND 35B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Front Tires
719689036
719955036
719959056
25x8.5-14 4PR R3 TURF CIH
7x14 6PR R1 CIH
25x8.50-14 6PR R4 CIH
98 LB
95 LB
107 LB
9000254P87
9000258P72
9000332P64
$331.00
$336.00
$432.00
41x14.00-20 4PR TURF TL R3 CIH
11.2x24 4PR R1 CIH
43x16.00-20 4PR TL IND R4 CIH
347 LB
343 LB
418 LB
9000997P92
9000652P19
9000863P94
$1,296.00
$847.00
$1,122.00
Rear Tires
719781036
719956036
719142016
-T0CH 01 015 000 12-OCT-11
-T0CH 02
FARMALL 40B AND 50B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
DIESEL ENGINE:
Farmall 40B
Mitsubishi S4QL 4 Cyl. Diesel Engine
41.0 Gross Engine hp @ 2600 rpm
34.3 PTO hp @ 2600 rpm (Gear)
32.8 PTO hp @ 2600 rpm (Hydro)
153 cu. in.(2.5L) Displacement
TRANSMISSION OPTIONS:
16 x 16 Synchronized Shuttle Shift
(SSS)
Left-hand, dash mounted,
synchronized shuttle
(4) Synchronized gears
(4) Non-synchronized ranges
Farmall 50B:
Mitsubishi S4QL 4 Cyl. Diesel Engine
47.0 Gross Engine hp @ 2700 rpm
39.4 PTO hp @ 2700 rpm (Gear)
37.1 PTO hp @ 2700 rpm (Hydro)
153 cu. in. (2.5L) Displacement
3-Range Hydrostatic with Cruise Control
and Dual-Pedal direction control for
forward and reverse
HYDRAULIC SYSTEM:
Open Center Hydraulic System
Dual Gear-type Pumps
Implement Pump Capacity:
- 8.2 gpm (31.2 L/min)
Steering Pump Capacity:
- Gear models = 4.1 gpm (15.6 L/min)
- HST models = 5.5 gpm (20.8 L/min)
Mid-mount Hydraulic Valve &
Joystick (STD)
ALL MODELS:
4 Cylinders
Naturally Aspirated
Under Hood Muffler / Exhaust
Two-stage Dual Element Air Cleaner
Full-flow, Spin-on Oil Filter
9.5 gallon (36L) Fuel Tank
Fuel Filter with water separator
Quick Glow Plug Starting Aid
Flip-up Hood w/ Gas Strut
3-POINT LIFT SYSTEM:
Lift Capacity @ 24 in. behind link ends:
2469 lb. (1120 kg)
Category I, 3-point Linkage
Position Control Lever
Drop Rate Control Knob
Crank-type Leveling Mechanism
Telescoping Stabilizers
Flexible Link Ends
INSTRUMENT PANEL:
Analog Tachometer
Fuel Gauge
Coolant Temperature Gauge
Hour Meter
Engine Oil Pressure Warning Light
Battery Charge Warning Light
Cold Starting Aid Indicator Light
PTO ON Indicator Light
Parking Brake Indicator Light
Turn Indicator Lights
Hazard Flasher Indicator Lights
High Beam Headlight Indicator
ROPS:
2-Post, Foldable Roll Bar
Seat Belt
ELECTRICAL:
12-volt, 80Ah, 660 CCA Battery
Safety Start Switch
Key Start/Fuel Shutoff
50 amp Alternator
Operator Presence System
-T0CH 02 015 000 12-OCT-11
-T0CH 02
FARMALL 40B AND 50B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
LIGHTING:
(2) Halogen Corner Work Lights
(2) Halogen Headlights
(2) Taillights / Brakelights
(2) Flashing Warning Lights / Turn
Signals
FRONT AXLE:
Four Wheel Drive (MFD)
Fixed Position Rims
51.7 in. (1314 mm) Tread Setting with
R4 tires
REAR AXLE:
Flange Type Axle
Reversible Position Rims - R1 tires only
Fixed Position Rims - R3, R4 tires
47.7 in. (1212 mm) Tread Setting with
R4 tires
PTO:
Rear PTO
- Independent 540 rpm
- Electro-hydraulic engagement
- Flip-up Shield
- Shaft Cap
OPERATOR'S AREA:
Contoured Cushion Seat
- Fore / Aft / Height / Weight
Compensating
- Spring Suspension
Deluxe Floor Mat
Foot Throttle
Left Side Step
Left Side Grab Handle
Right Side Cupholder & Tray
DRAWBAR:
Swinging
2-Position Extendable
REAR DIFFERENTIAL LOCK
STEERING:
Hydrostatic Power Steering
Tilt Steering Column
BRAKES:
Wet Disc
Dual Brake Pedals
Foot-assist Parking Brake Lever
SLOW MOVING VEHICLE EMBLEM
-T0CH 02 015 000 12-OCT-11
-T0CH 02
FARMALL 40B AND 50B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Models
COMMERCIAL
MODEL
FARMALL 40B
TRACTOR
FARMALL 50B
TRACTOR
VERSION
ENGINE POWER
TRACTION
Rops
40 HP
4 WD
9016428P72
$21,336.00
Rops
50 HP
4 WD
9017814P72
$23,136.00
Packet
Farmall B Pack 1
SD_T2810-TRANSMISSION
SD_T4940-FRONT WHEELS AND
TIRES
SD_T4950-REAR WHEELS AND
TIRES
SD_T8270-REAR REMOTES
Description
Weight
Weight
Factory Data
Factory Data
9003210P90
List Price
List Price
$4170.00
HST + 3 RANGE
10X16.5 6PR R4
420/70 -24 TL R4
1 Remote DA
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
TRANSMISSION
SD_T2810 TRANSMISSION
330014
HST + 3 RANGE
330271
16x16 Synchro Shuttle
9001231P23
$1,599.00
No Charge
9000735P35
9000997P92
9000930P93
$955.00
$1,296.00
$1,209.00
No Charge
REAR WHEELS AND TIRES
SD_T4950 REAR WHEELS AND TIRES
8338604 13.6-24 4PR R1
8304804 41X14.00-20 4PR R3
8320664 420/70 -24 TL R4
8399907 Less rear wheels and tires
-T0CH 02 015 000 12-OCT-11
-T0CH 02
FARMALL 40B AND 50B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
FRONT WHEELS AND TIRES
SD_T4940 FRONT WHEELS AND TIRES
8253304 9.5X16 4PR R1
8299604 28 X 8.50-15 4PR R3
8254304 10X16.5 6PR R4
8199907 Less front wheels and tires.
9000501P27
9000501P27
9000579P04
$651.00
$651.00
$752.00
No Charge
HITCH AND DRAWBAR
SD_T8960 3 - POINT LINKAGE-REAR
720902
3-Point Hitch w/ flexlink ends
No Charge
REMOTES
SD_T8270 REAR REMOTES
XT8270X Base Equipment -See Std Featrs
Less Rear Remote
720366
1 Remote SDA
Fits Farmall 30B/35B Gear or Hydro & Farmall 40B/45B Gear
720826
1 Remote DA
Fits Farmall B 40/50 Hydro
No Charge
9000469P70
$610.00
9000469P70
$610.00
-T0CH 02 015 000 12-OCT-11
-T0CH 02
FARMALL 40B AND 50B COMPACT TRACTOR
US PRICE LIST
(Ex Works Port of Entry)
Factory Supplied Attachments
Order Code
719781036
719963036
719110016
Description
Weight
Factory Data
List Price
41x14.00-20 4PR TURF TL R3 CIH
13.6x24 4PR R1 CIH
420/70-24 8PR TL R4 CIH
347 LB
298 LB
268 LB
9000997P92
9000735P35
9000930P93
$1,296.00
$955.00
$1,209.00
28x8.50-15 4PR TL TURF R3 CIH
9.5-16 4PR R1 CIH
10x16.5 6PR TL R4 CIH
418 LB
153 LB
173 LB
9000501P27
9000501P27
9000579P04
$651.00
$651.00
$752.00
Front Tires
719145016
719913036
719968056
-T0CH 02 015 000 12-OCT-11
-CP9J 01
L300 LOADERS FOR COMPACT FARMALL B
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
L340 SPECIFICATIONS
(PER ASAE S301.3):
L340 Loader includes the following:
L340 SPECIFICATIONS
(PER ASAE S301.3):
L340 (For Farmall 30B & 35B)
Distances in (in/mm) unless
otherwise noted. Forces in (lbs/kg)
unless otherwise noted
Curved Boom, Mid-Mount, Quick
Attach Design
Maximum Lift Height:
98.4 / 2500
Dump Clearance:
75.3 / 1913
Digging Depth:
8 / 203
Lift Capacity
@ bucket pivot point:
1250 / 567
@ 19.7 in. (500mm) from bucket
pivot point:
890 / 404
Breakout Force
@ bucket pivot point:
2700 / 1225
@ 19.7 in. (500mm) from bucket
pivot point:
1900 / 862
Reach @ Maximum Lift:
31 / 787
Bucket Rollback:
32º
Bucket Dump Angle:
39º
Bucket Level Indicator
Parking Stand
Basic Loader for Farmall 30B & 35B
Mounting Kit
Quick Coupler - Skid Steer Style
68" HD Material Bucket (Quick Attach)
(Mid-mount valve & Joystick are
included with tractor)
Loader specifications are subject to
change and may vary based on tractor
model and tire size.
NOTE: COMPATIBILITY INFORMATION
To assure proper performance,
see Operator's manual for
recommended counterweighting
-CP9J 01 015 000 12-OCT-11
-CP9J 01
L300 LOADERS FOR COMPACT FARMALL B
US PRICE LIST
(Ex Works Port of Entry)
Standard Equipment
L350 SPECIFICATIONS
(PER ASAE S301.3):
L350 Loader includes the following:
L350 SPECIFICATIONS
(PER ASAE S301.3):
L350 (For Farmall 40B and 50B)
Distances in (in/mm) unless
otherwise noted. Forces in (lbs/kg)
unless otherwise noted
Curved Boom, Mid-Mount, Quick
Attach Design
Maximum Lift Height:
105 / 2667
Dump Clearance:
81.5 / 2070
Digging Depth:
6.5 / 165
Lift Capacity
@ bucket pivot point:
2000 / 907
@ 19.7 in. (500mm) from bucket
pivot point:
1540 / 699
Breakout Force
@ bucket pivot point:
3540 / 1606
@ 19.7 in. (500mm) from bucket
pivot point:
2640 / 1197
Reach @ Maximum Lift:
33 / 838
Bucket Rollback:
30º
Bucket Dump Angle:
58º
4-Bar Bucket Linkage
Bucket Level Indicator, Parking Stand
Basic Loader for Farmall 40B & 50B
Mounting Kit
Quick Coupler - Skid Steer Style
72" HD Material Bucket (Quick Attach)
(Mid-mount valve & Joystick are
included with tractor)
Loader specifications are subject to
change and may vary based on tractor
model and tire size.
COMPATIBILITY INFORMATION:
To assure proper performance,
see Operator's manual for
recommended counterweighting
-CP9J 01 015 000 12-OCT-11
-CP9J 01
L300 LOADERS FOR COMPACT FARMALL B
US PRICE LIST
(Ex Works Port of Entry)
Models
COMMERCIAL
MODEL
L340 FARMALL
30B/35B
L350 FARMALL
40B/50B
PACKAGED KIT
SPECIALTY
Weight
Quick Attach Less Valve
68 in. Bucket
650 LB
9004221P14
$5,482.00
Quick Attach Less Valve
72 in. Bucket
488 LB
9004587P66
$5,958.00
Factory Data
List Price
-CP9J 01 015 000 12-OCT-11
-CP1Z 01
MW SERIES MOWERS FOR FARMALL B
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
MW166S Side Discharge Mid-Mount
Rotary Mower
For use with Farmall 30B & 35B Tractors
MW172S Side Discharge Mid-Mount
Rotary Mower
For use with Farmall 40B & 50B Tractors
SPECIFICATIONS:
Cutting Width (in.) - 66
Cutting Height (in.) - 1-4
Overall width (in.) - discharge chute
down 69
Number of Blades - 3
Blade Type - Standard
Blade Length/Width (in.) - 23 L x 2.5 W
Blade Tip Speed (in feet per minute) Less than 18000 (ANSI)
Drive - Mid PTO
Gauge Wheels (in.) - 2 x 6 (4)
Deck Spring suspension - Yes
Deck Shell Weldment - 10 gauge sides,
10 gauge top, 1/4" spindle
reinforcement pads
SPECIFICATIONS:
Cutting Width (in.) - 72
Cutting Height (in.) - 1-4
Overall width (in.) - discharge chute
down 85
Number of Blades - 3
Blade Type - Standard
Blade Length/Width (in.) - 25 L x 2.5 W
Blade Tip Speed (in feet per minute) Less than 18,000 (ANSI)
Drive - Mid PTO
Gauge Wheels (in.) - 2 x 6 (4)
Deck Spring suspension - Yes
Deck Shell Weldment - 10 gauge sides,
10 gauge top, 1/4" spindle
reinforcement pads
Tire Compatibility:
Agricultural (R1) - Yes, limited turn
angle:
Right Hand - 24 degrees, Left Hand - 27
degrees
Industrial (R4) - Yes, limited turn angle:
Right Hand - 33 degrees, Left Hand - 37
degrees
Turf (R3) - Yes, limited turn angle:
Right Hand - 33 degrees, Left Hand - 37
degrees
Galaxy Turf - NO
Tire Compatibility:
Agricultural (R1) - NO
Large Industrial (R4) - NO
Small Industrial (R4) - Yes, limited turn
angle:
Right Hand - 34 degrees, Left Hand - 35
degrees
Turf (R3) - Yes, limited turn angle:
Right Hand - 34 degrees, Left Hand - 35
degrees
Galaxy Turf - NO
Mulch Kit - AMENHM728 (Service Parts)
Mulch Kit - AMENHM628 (Service Parts)
?=
-CP1Z 01 014 000 01-SEP-11
-CP1Z 01
MW SERIES MOWERS FOR FARMALL B
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
Weight
MW66S FARMALL B
MW72S FARMALL B
Factory Data
9002320P78
9002726P57
?k
List Price
$3,014.00
$3,541.00
-CP1Z 01 014 000 01-SEP-11
-CP1Q 01
MW SERIES MID-MOUNTED SIDE DISCHARGE MD
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
MW60S (FOR FARMALL 31 AND 35):
Mid-mounted, direct drive,
finishing mower
Cutting width: 60 inches (1524mm)
Discharge: Side
Number of blades: 3
Blade type: High lift
Blade dimensions:
Length 20.4 inches (518mm)
Width 2.5 inches (64mm)
Blade tip speed @ rated engine speed:
15306 (FPM)
Mid PTO drive
Cutting height: 1.5 to 4 inches
(38 to 102mm)
Gauge wheels: 6 x 2.5 inches
(152 x 64mm)
Overall width with discharge chute
down: 76.5 inches (1943mm)
Deck spring suspension
Tire compatibility: Turf - Industrial Galaxy® Turf*
MW72S: (continued)
Blade dimensions:
Length 24.5 inches (622mm)
Width 3 inches (76mm)
Blade tip speed @ rated engine speed:
15616 (FPM)
Mid PTO drive
Cutting height: 1.5 to 4 inches
(38 to 102mm)
Gauge wheels: 6 x 2.5 inches
(152 x 64mm)
Overall width: 85.5 inches (2177mm)
Deck spring suspension
Tire compatibility: Turf - Industrial Galaxy® Turf*
Requirements for Operation:
TRACTOR MID MOUNT PTO IS
REQUIRED. If tractor is not equipped
with Mid Mount PTO, order appropriate
kit from tractor Parts Division Supplied
Accessories chart.
MW72S (FOR FARMALL 31 AND 35):
Mid-mounted, direct drive,
finishing mower
Cutting width: 72 inches (1830mm)
Discharge: Side
Number of blades: 3
Blade type: Standard
* When installing an MW60S or MW72S
on a Farmall 31 or 35 equipped with
Galaxy® turf tires, service kit AUB164147
is required.
Please order AUB164147 from Parts
Division Supplied Accessories.
Galaxy® is a registered trademark of
Galaxy Tire & Wheel Inc.
?q
-CP1Q 01 014 000 01-SEP-11
-CP1Q 01
MW SERIES MID-MOUNTED SIDE DISCHARGE MD
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
MW60S MD_MT SIDE MOW
MW72S MD_MT SIDE MOW
MODEL
Weight
MWX602 60IN SD CLS
MWX72S 72IN SD CLS
Factory Data
515 LB
515 LB
List Price
9002758P91
9003488P87
$3,583.00
$4,531.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
45
-CP1Q 01 014 000 01-SEP-11
-CP1Q 02
MW SERIES MID-MOUNTED REAR DISCHARGE MD
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
MW72R (FOR FARMALL 31 AND 35):
Mid-mounted, direct drive,
finishing mower
Cutting width: 72 inches (1830mm)
Discharge: Rear
Number of blades: 3
Blade type: Standard
Blade dimensions:
Length 24.5 inches (622mm)
Width 3 inches (76mm)
Blade tip speed @ rated engine speed:
15616 (FPM)
Mid PTO drive
Cutting height: 1.5 to 4 inches
(38 to 102mm)
Gauge wheels: 6 x 2.5 inches
(152 x 64mm)
Overall width: 74.4 inches (1890mm)
Deck spring suspension
Tire compatibility: Ag-Turf-IndustrialGalaxy® Turf*
MW84R: (continued)
Gauge wheels: 6 x 2.5 inches
(152 x 64mm)
Overall width: 87.4 inches (2220mm)
Deck spring suspension
Tire compatibility: Ag-Turf-IndustrialGalaxy® Turf**
(Note: The MW84R cannot be installed
on Farmall 40 and 45 CVT versions)
Requirements for Operation:
TRACTOR MID MOUNT PTO IS
REQUIRED. If tractor is not equipped
with Mid Mount PTO, order appropriate
kit from tractor Parts Division Supplied
Accessories chart.
* When installing an MW72R on a
Farmall 31 or 35 equipped with Galaxy®
turf tires, service kit AUB164147 is
required.
MW84R (FOR FARMALL 40 AND
45 - HST ONLY):
Mid-mounted, direct drive,
finishing mower
Cutting width: 84 inches (2134mm)
Discharge: Rear
Number of blades: 4
Blade type: Gator® Mulcher Blades
Blade dimensions:
Length 22.81 inches (580mm)
Width 3 inches (76mm)
Blade tip speed @ rated engine speed:
15616 (FPM)
Mid PTO drive
Cutting height: 2 to 4 inches
(51 to 102mm)
** When installing an MW84R on a
Farmall 40 or 45 equipped with Galaxy®
turf tires, service kit AUB163560 is
required.
(Please order AUB164147 or
AUB163560 from Parts Division
Supplied Accessories)
Galaxy® is a registered trademark of
Galaxy Tire & Wheel Inc.
Gator® is a registered trademark of
Frederick Manufacturing of
Kansas City, MO
4?
-CP1Q 02 014 000 01-SEP-11
-CP1Q 02
MW SERIES MID-MOUNTED REAR DISCHARGE MD
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
MW72R MD_MT REAR MOW
MW84R MD_MT REAR MOW
MODEL
Weight
MWX72R 72IN RD MULC
MWX84R 84IN RD MULC
Factory Data
515 LB
515 LB
List Price
9003629P01
9005095P86
$4,713.00
$6,618.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
44
-CP1Q 02 014 000 01-SEP-11
-CP1A 01
RR SERIES REAR MOUNT FINISHING MOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
RR60 - RIGID FRAME:
Category I 3-point mounted
finishing mower
Cutting Width: 60 inches (1524mm)
Discharge: Rear
Discharge Safety Chain
PTO HP Rating: Up to 30
Drive Method: Rear 540 RPM PTO
Number of Blades: 3
Blade Drive: V-Belt
Blade speed (RPM): 2,630
Cutting Height: 1 to 4 in. (25 to 101mm)
(4) Solid Rubber Gauge Wheels
(fully rotating)
RR144 - FLEX WING:
Overall Cutting Width - 12 ft. (3.66m) Flex
Center Deck Cutting Width - 5 ft. (1.52m)
Wing Deck Cutting Width - 4 ft. (1.22m)
Deck Overlap - 6 in. (152 mm)
Overall Width - 146 in. (3.71m)
Transport Width - 100 in. (2.54m)
Maximum Overall Length - 182 in.
(4.62m)
Transport Length - 177 in. (4.5m)
Transport Height - 90 in. (2.29m)
Minimum HP - 30
Cutting Height Range - 1 to 5 in.
(25 to 127 mm)
Blade Tip Speed (FPM) - 16,000
Caster Wheels (12) - 15x6.00-6
Transport Tires (2) - 26x12.00-12
RR72 - RIGID FRAME:
Category I 3-point mounted
finishing Mower
Cutting Width: 72 inches (1829mm)
Discharge: Rear
Discharge Safety Chain
PTO HP Rating: Up to 40
Drive Method: Rear 540 RPM PTO
Number of Blades: 3
Blade Drive: V-Belt
Blade speed (RPM): 2,230
Cutting Height: 1 to 4 in. (25 to 101mm)
(4) Solid Rubber Gauge Wheels
(fully rotating)
RR180 - FLEX WING:
Overall Cutting Width - 15 ft. (4.57m) Flex
Center Deck Cutting Width - 6 ft. (1.83m)
Wing Deck Cutting Width - 5 ft. (1.52m)
Deck Overlap - 6 in. (152 mm)
Overall Width - 182 in. (4.62m)
Transport Width - 101 in. (2.57m)
Maximum Overall Length - 185 in. (4.7m)
Transport Length - 180 in. (4.57m)
Transport Height - 100 in. (2.54m)
Minimum HP - 35
Cutting Height Range - 1 to 5 in.
(25 to 127 mm)
Blade Tip Speed (FPM) - 16,000
Caster Wheels (12) - 15x6.00-6
Transport Tires (2) - 26x12.00-12
RR90 - RIGID FRAME:
Category I 3-point mounted
finishing mower
Cutting Width: 90 inches (2286mm)
Discharge: Rear
Discharge Safety Chain
PTO HP Rating: Up to 60
Drive Method: Rear 540 RPM PTO
Number of Blades: 5
Blade Drive: V-Belt
Blade speed (RPM): 2,630
Cutting Height: 1 to 4 in. (25 to 101mm)
(4) Solid Rubber Gauge Wheels
(fully rotating)
47
-CP1A 01 014 000 01-SEP-11
-CP1A 01
RR SERIES REAR MOUNT FINISHING MOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
RR204 - FLEX WING:
Overall Cutting Width - 17 ft. (5.18m) Flex
Center Deck Cutting Width - 7.5 ft.
(2.29m)
Wing Deck Cutting Width - 6 ft. (1.83m)
Deck Overlap - 12 in. (305 mm)
Overall Width - 207 in. (5.26m)
Transport Width - 102 in. (2.59m)
Maximum Overall Length - 196 in.
(4.98m)
RR204 - FLEX WING: (continued)
Transport Length - 188 in. (4.78m)
Transport Height - 110 in. (2.79m)
Minimum HP - 40
Cutting Height Range - 1 to 5 in.
(25 to 127 mm)
Blade Tip Speed (FPM) - 16,000
Caster Wheels (12) - 15x6.00-6
Transport Tires (2) - 26x12.00-12
48
-CP1A 01 014 000 01-SEP-11
-CP1A 01
RR SERIES REAR MOUNT FINISHING MOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
RR60 60 INCH MOWER
RR72 72 INCH MOWER
RR90 90 INCH MOWER
RR144 12 FT MOWER
RR180 15 FT MOWER
RR204 17 FT MOWER
Weight
2,000 LB
2,000 LB
2,000 LB
3,000 LB
3,520 LB
3,520 LB
Factory Data
9002066P68
9002177P56
9002983P75
9011242P77
9012129P04
9013204P73
List Price
$2,684.00
$2,828.00
$3,875.00
$14,601.00
$15,752.00
$17,149.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
46
No Charge
-CP1A 01 014 000 01-SEP-11
4<
-CP1C 01
BR SERIES FRONT MOUNT ROTARY BROOMS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
Model BR160:
(FOR FARMALL 31, 35, 40, 45 & 50)
Quick attach design, mid-PTO driven
Sweeping width: 55 inches (1397mm)
Sweeping width @ 25º: 49 inches
(1245mm)
Broom diameter: 22 inches (560mm)
Brush type: Wafer
Bristle material: Polypropylene
Manual angling: Standard
Angling range: 0 to 25º
Drive system: PTO to Gearbox to
#50 HD chain
Storage stand: Standard
REQUIREMENTS FOR OPERATION:
TRACTOR MID MOUNT PTO IS
REQUIRED.
If tractor is not equipped with Mid
Mount PTO, order appropriate kit from
tractor Parts Division Supplied
Accessories chart.
(NOTE: On CVT version tractors,
Mid Mount PTO is only available as
a factory installed option.)
FOR FARMALL 31-50 TRACTORS:
TRACTOR MUST BE EQUIPED WITH
MID MOUNT VALVE AND JOYSTICK in
order to operate loaders, front mount
brooms, front mount blades or
front mount snow blowers.
Model BR172:
(FOR FARMALL 31, 35, 40, 45 & 50)
Quick attach design, Mid-PTO driven
Sweeping width: 67 inches (1702mm)
Sweeping width @ 25º: 60 inches
(1525mm)
Broom diameter: 22 inches (560mm)
Bristle material: Polypropylene
Brush type: Wafer
Manual angling: Standard
Angling range: 0 to 25º
Drive system: PTO to Gearbox to
#50 HD chain
Storage stand: Standard
If tractor was not ordered "Loader
Ready" please consult the Compact
Tractor Parts Division Supplied
Accessories chart for valve and
joystick ordering information.
FOR FARMALL B TRACTORS:
Tractor comes equipped with
Mid-mount valve and Joystick as
standard equipment
Model BR172:
(FOR FARMALL 30B, 35B, 40B & 50B)
Quick attach design, Mid-PTO driven
Sweeping width: 67 inches (1702mm)
Sweeping width @ 25º: 60 inches
(1525mm)
Broom diameter: 22 inches (560mm)
Bristle material: Polypropylene
Brush type: Wafer
Manual angling: Standard
Angling range: 0 to 25º
Drive system: PTO to Gearbox to
#50 HD chain
Storage stand: Standard
4=
-CP1C 01 014 000 01-SEP-11
-CP1C 01
BR SERIES FRONT MOUNT ROTARY BROOMS
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
BR160 ROTARY BROOM
BR172 ROTARY BROOM
BR172 FARMALL B
MODEL
Weight
BR160 FOR FARMALL 31-50
BR172 FOR FARMALL 31-50
BR172 FOR FARMALL B
Factory Data
500 LB
500 LB
500 LB
List Price
9003252P48
9003663P66
9003663P66
$4,224.00
$4,758.00
$4,758.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME
XN5701X No front mounting brackets
715425
Front quick hitch - Class 2
For Farmall 31 and 35
717751
Front quick hitch - Class 3
For Farmall 40 and 45 (HST or CVT) and Farmall 50 (CVT)
717989
Front quick hitch 30/35/40/50
For Farmall 30B, 35B, 40B and 50B
9001106P49
No Charge
$1,437.00
9001451P45
$1,885.00
9001258P95
$1,635.00
35 LB
9000602P91
No Charge
$783.00
7 LB
9000514P36
$668.00
9000514P36
$668.00
9000670P67
$871.00
318 LB
DRIVE COMPLETION KITS
SD_03007 MID PTO DRIVE KIT
X03007X No Selection
715584
Drive completion kit 715584
For Farmall 31 and 35
717155
MID PTO Drive Kit-III
For Farmall 40 and 45 - HST Only
717761
MID PTO Drive Kit-III AT
For Farmall 40, 45 and 50 - CVT only
717990
MID PTO 30/35/40/50
For Farmall 30B, 35B, 40B and 50B
HYDRAULIC ANGLING KIT
SD_20087 HYDRAULIC FRAME ANGLING KIT
X20087X No hydraulic angling kit
No Charge
4k
-CP1C 01 014 000 01-SEP-11
-CP1C 01
BR SERIES FRONT MOUNT ROTARY BROOMS
US PRICE LIST
(Ex Works Wholegoods Depot)
715677
Hydraulic angling kit
26 LB
9000472P78
$614.00
47 LB
9000401P94
No Charge
$522.00
SIDE CASTERWHEELS KIT
SD_29035 SIDE CASTER WHEEL KIT
X29035X No side casterwheels kit
717231
Side casterwheels kit
2x6
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
4q
-CP1C 01 014 000 01-SEP-11
-CP1C 01
BR SERIES FRONT MOUNT ROTARY BROOMS
US PRICE LIST
(Ex Works Wholegoods Depot)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Quick Hitch and Subframe
715425026
717751006
717989006
Subframe Cls 2
Quick hitch and subframe for Farmall 31 and 35
SUBFRAME CLS 3
Quick hitch and subframe for Farmall 40, 45 (HST or CVT)
and Farmall 50 (CVT)
SUBFRAME 30/35/40/50 HP
Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
236 LB
9001134P21
$1,473.00
510 LB
9001450P68
$1,884.00
350 LB
9001258P95
$1,635.00
25 LB
9000602P91
$783.00
1 LB
9000513P59
$667.00
30 LB
9000513P59
$667.00
30 LB
9000670P67
$871.00
47 LB
9000446P60
$580.00
10 LB
9000472P78
$614.00
101 LB
9000170P94
$222.00
Mid PTO Drive Completion Kits
715584006
717155016
717761006
717990006
ATTACHMENT, MID PTO DRIVE 60"
Mid PTO drive kit For Farmall 31 and 35
MID PTO Drive Kit Cls 3
For Farmall 40 and 45 with HST only
MID PTO Drive Kit Cls 3 AT
For Farmall 40, 45 and 50 - CVT only
MID PTO 30/35/40/50 HP
Mid PTO drive kit for Farmall 30B, 35B, 40B and 50B
Additional Attachments
717231016
715677016
715655036
2 X 6 side caster w/Wheel kit
For BR160 and BR172
HYD ANGLING 60&72"(2.0,3.0)
For Farmall 30, 35, 40, 45, 50 and Farmall 30B, 35B, 40B and 50B
Ballasting box for 3-point hitch
(Category I) capacity of 400 lbs., for total maximum
weight of 500 lbs,
(For Farmall 31 - 50 tractors and Farmall B tractors) - Ex Works
Wholegoods Depot. This item must be placed on a
separate order. Items ordered under Other Equipment
Section can not also be ordered as a factory supplied
accessory on the same order. A separate order is
necessary if additional quanities are required.
75
-CP1C 01 014 000 01-SEP-11
-CP1K 01
TL SERIES ROTARY TILLERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
TL152:
Recommended for use on
(Farmall 31 and 35 and
Farmall 30B and 35B)
Approximate working width: 52 inches
(1320mm)
Tilling depth adjustment with guide
shoes: 0 to 4.5 inches (0 to 114mm)
Maximum tilling depth without guide
shoes: 7.25 inches (184mm)
Hitch: Category I
Offset Adjustment to Right: 11 inches
(280mm)
PTO hp Rating: 45
Rotor Drive Type: Chain
Drive Protection: Slip Clutch
Rotor Speed @ 540 RPM PTO: 231 RPM
Number of Blades: 24
Blade Tip Speed @ 540 RPM:
1043(FPM)
TL172:
Recommended for use on
(Farmall 31 and 35 and
Farmall 30B and 35B)
Approximate working width: 72 inches
(1830mm)
Tillage depth adjustment with guide
shoes: 0 to 4.5 inches (1 to 114mm)
Maximum tillage depth without guide
shoes: 7.25 inches (184mm)
Hitch: Category I
Offset Adjustment to Right: 11 inches
(280mm)
PTO hp Rating: 45
Rotor Drive Type: Chain
Drive Protection: Slip Clutch
Rotor Speed at 540 RPM PTO: 236 RPM
Number of Blades: 36
Blade Tip Speed @ 540 RPM:
1063 (FPM)
TL160:
Recommended for use on
(Farmall 31 and 35 and
Farmall 30B and 35B)
Approximate working width: 60 inches
(1524mm)
Tilling depth adjustment with guide
shoes: 0 to 4.5 inches (0 to 114mm)
Maximum tilling depth without guide
shoes: 7.25 inches (184mm)
Hitch: Category I
Offset Adjustment to Right: 11 inches
(280mm)
PTO hp Rating: 45
Rotor Drive Type: Chain
Drive Protection: Slip Clutch
Rotor Speed @ 540 RPM PTO: 236 RPM
Number of Blades: 28
Blade Tip Speed @ 540 RPM:
1063 (FPM)
TL172H:
Recommended for use on
(Farmall 40, 45, 50, 55 and 60 and
Farmall 40B and 50B)
Approximate working width: 72 inches
(1830mm)
Tilling depth adjustment with guide
shoes: 0 to 5 inches (0 to 127mm)
Maximum tillage depth without guide
shoes: 7 inches (178mm)
Hitch: Category I or II
Offset Adjustment to Right: 11 inches
(280mm)
PTO hp Rating: 60
Rotor Drive Type: Gear
Drive Protection: Slip Clutch
Rotor Speed @ 540 RPM PTO: 211 RPM
Number of Blades: 36
Blade Tip Speed @ 540 RPM:
944 (FPM)
7?
-CP1K 01 014 000 01-SEP-11
-CP1K 01
TL SERIES ROTARY TILLERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
TL180H:
Recommended for use on
(Farmall 40, 45, 50, 55, and 60,
Farmall 40B and 50B
and Farmall 65C tractors)
Approximate working width: 80 inches
(2032mm)
Tillage depth adjustment with guide
shoes: 0 to 5 inches (0 to 127mm)
Maximum tillage depth without guide
shoes: 7 inches (178mm)
Hitch: Category I or II
TL180H: (continued)
Offset Adjustment to Right: 11 inches
(280mm)
PTO hp Rating: 60
Rotor Drive Type: Gear
Drive Protection: Slip Clutch
Rotor Speed @ 540 RPM PTO: 211 RPM
Number of Blades: 40
Blade Tip Speed @ 540 RPM:
944 (FPM)
74
-CP1K 01 014 000 01-SEP-11
-CP1K 01
TL SERIES ROTARY TILLERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
TL152 52IN ROT TILL
TL160 60IN ROT TILL
TL172 72IN ROT TILL
TL172H 72IN ROT TILL
TL180H 80IN ROT TILL
MODEL
Weight
TLX152 52IN CHAIN D
TLX160 60IN CHAIN D
TLX172 72IN CHAIN D
TL172H 72IN HD GEAR
TL180H 80IN HD GEAR
Factory Data
1,000 LB
1,000 LB
1,000 LB
1,000 LB
1,200 LB
List Price
9001915P76
9002062P06
9002328P48
9002640P33
9002828P98
$2,488.00
$2,678.00
$3,024.00
$3,429.00
$3,674.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
77
-CP1K 01 014 000 01-SEP-11
78
-CP1L 01
BM SERIES FRONT MOUNTED BLADES -BM1
US PRICE LIST
(Ex Works - See Standard Equipment)
Standard Equipment
BM172 (FOR FARMALL 31 AND 35):
Quick attach design
Moldboard width: 72 inches (1830mm)
Moldboard height 22 inches (560mm)
Reversible cutting edge
Cutting edge thickness: 0.5 inch
(12.7mm)
Hydraulic angling
Angling range: 0 to 30 degrees
Adjustable skid shoes
REQUIREMENTS FOR OPERATION:
FOR FARMALL 31-50 TRACTORS:
TRACTOR MUST BE EQUIPED WITH
MID MOUNT VALVE AND JOYSTICK in
order to operate loaders, front mount
brooms, front mount blades or front
mount snow blowers.
If tractor was not ordered
"Loader Ready" please consult the
Compact Tractor Parts Division
Supplied Accessories chart for
valve and joystick ordering information.
BM172H HEAVY DUTY:
(FOR FARMALL 40, 45 AND 50 and
FARMALL 30B, 35B, 40B AND 50B)
Quick attach design
Moldboard width: 72 inches (1830mm)
Moldboard height: 22 inches (560mm)
Reversible cutting edge
Cutting edge thickness: 0.5 inch
(12.7mm)
Hydraulic angling
Angling range: 0 to 30 degrees
Adjustable skid shoes
FOR FARMALL B TRACTORS:
Tractor comes equipped with
Mid-mount valve and Joystick as
standard equipment
EX WORKS:
Wholegoods
(Ex Works Wholegoods Depot)
Standard Factory Attachments
(Ex Works Wholegoods Depot)
BM184H HEAVY DUTY:
(FOR FARMALL 40, 45 AND 50 and
FARMALL 40B AND 50B)
Quick attach design
Moldboard width: 84 inches (2135mm)
Moldboard height: 22 inches (560mm)
Reversible cutting edge
Cutting edge thickness: 0.5 inch
(12.7mm)
Hydraulic angling
Angling range: 0 to 30 degrees
Adjustable skid shoes
76
-CP1L 01 014 000 01-SEP-11
-CP1L 01
BM SERIES FRONT MOUNTED BLADES -BM1
US PRICE LIST
(Ex Works - See Standard Equipment)
Models
COMMERCIAL MODEL
BM172 FR BLADE CL2
BM172H FR BLADE CL3
BM184H FR BLADE CL3
MODEL
Weight
BM172 72IN FRNT BL
BM172H 72IN HD FRNT
BM184H 84IN HD FRNT
Factory Data
300 LB
300 LB
300 LB
List Price
9001694P77
9001998P15
9002395P47
$2,201.00
$2,595.00
$3,111.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME
XN5701X No front mounting brackets
715425
Front quick hitch - Class 2
For Farmall 31 and 35
717751
Front quick hitch - Class 3
For Farmall 40, 45 (HST and CVT) and Farmall 50 (CVT)
717989
Front quick hitch 30/35/40/50
For Farmall 30B, 35B, 40B and 50B
318 LB
9001106P49
No Charge
$1,437.00
9001451P45
$1,885.00
9001258P95
$1,635.00
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
OTHER EQUIPMENT
SD_40002 BALLAST BOX
X40002X No ballasting box
No Charge
7<
-CP1L 01 014 000 01-SEP-11
-CP1L 01
BM SERIES FRONT MOUNTED BLADES -BM1
US PRICE LIST
(Ex Works - See Standard Equipment)
717746
Ballasting box - 500 lbs.
For 3-pt hitch
SD_50091 RUBBER BLADE EDGE
X50091X No rubber cutting edge
715679
Rubber cutting edge
7=
100 LB
9000174P79
$227.00
61 LB
9000187P88
No Charge
$244.00
-CP1L 01 014 000 01-SEP-11
-CP1L 01
BM SERIES FRONT MOUNTED BLADES -BM1
US PRICE LIST
(Ex Works - See Standard Equipment)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Quick Hitch and Subframe
715425026
717751006
717989006
Subframe Cls 2
Quick hitch and subframe for Farmall 31 and 35
SUBFRAME CLS 3
Quick hitch and subframe for Farmall 40, 45 (HST and CVT)
and Farmall 50 (CVT)
SUBFRAME 30/35/40/50 HP
Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
236 LB
9001134P21
$1,473.00
510 LB
9001450P68
$1,884.00
350 LB
9001258P95
$1,635.00
60 LB
9000187P88
$244.00
101 LB
9000170P94
$222.00
Additional Attachments
715679026
715655036
Rubber Cutting Edge
For BM172 and BM172H
Ballasting box for 3-point hitch
(Category I) capacity of 400 lbs., for total maximum
weight of 500 lbs,
(For Farmall 31 - 50 tractors and Farmall B tractors) - Ex Works
Wholegoods Depot. This item must be placed on a
separate order. Items ordered under Other Equipment
Section can not also be ordered as a factory supplied
accessory on the same order. A separate order is
necessary if additional quanities are required.
7k
-CP1L 01 014 000 01-SEP-11
-CP1L 02
BM SERIES FRONT MOUNTED BLADES -BM2
US PRICE LIST
(Ex Works - See Standard Equipment)
Standard Equipment
BM184 (FOR FARMALL 55 AND 60):
Moldboard Width: 84 inch (2135mm)
Moldboard Height: 20 inch (508mm)
Reversible Cutting Edge
Cutting Edge: 0.5 inch (12.7mm)
x 6 in. (152mm)
Blade Lift Height: 10 inch (254mm)
Digging Depth: 4.25 inches (108mm)
Maximum Blade Angle: 30°
Hydraulic Angle Blade Kit is
standard equipment
REQUIREMENTS FOR OPERATION:
TRACTOR MUST BE EQUIPED WITH
MID MOUNT VALVE AND JOYSTICK in
order to operate loaders, front mount
brooms, front mount blades or front
mount snow blowers.
If tractor was not ordered
"Loader Ready" please consult the
Compact Tractor Parts Division
Supplied Accessories chart for
valve and joystick ordering information.
EX WORKS:
Wholegoods
(Ex Works Sioux Falls, SD)
7q
-CP1L 02 014 000 01-SEP-11
-CP1L 02
BM SERIES FRONT MOUNTED BLADES -BM2
US PRICE LIST
(Ex Works - See Standard Equipment)
Models
COMMERCIAL MODEL
BM184 FR BLADE CL4
MODEL
Weight
BM184 84IN HD FRNT
Factory Data
300 LB
List Price
9000595P21
$773.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME
715423
Front Quick Hitch/Subframe5423
For Farmall 55 and 60
510 LB
9001714P79
$2,227.00
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
OTHER EQUIPMENT
SD_40002 BALLAST BOX
X40002X No ballasting box
717746
Ballasting box - 500 lbs.
For 3-pt hitch
100 LB
85
9000174P79
No Charge
$227.00
-CP1L 02 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
BS163H HEAVY DUTY:
For use with Farmall 31 and 35 ONLY
Quick attach design, mid-PTO driven
Overall width: 63 inches (1600mm)
Cutting width: 63 inches (1600mm)
Cutting height: 22 inches (560mm)
Number of blades: 4
Fan diameter: 18 inches (457mm)
Auger diameter: 14 inches (356mm)
Impeller drive: Gear box reduction
Auger Drive: Two-part chute with
manual chute rotation
Shearbolt protection
Adjustable skid shoes
Front mount and drive completion
package. Includes chute with
mechanical rotation, female
portion of quick hitch and
front half of driveline.
BS172H HEAVY DUTY:
For use with:
Farmall 40, 45, and 50 ONLY
Quick attach design, mid-PTO driven
Overall width: 72 inches (1830mm)
Cutting width: 72 inches (1830mm)
Cutting height: 26 inches (660mm)
Number of blades: 4
Fan diameter: 24 inches (610mm)
Auger diameter: 15 inches (381mm)
Impeller drive: Gear box reduction/
#60 HD chain
Auger Drive: Two-part chute with
manual chute rotation
Shearbolt protection
Adjustable skid shoes
Front mount and drive completion
package. Includes chute with
mechanical rotation, female
portion of quick hitch and
front half of driveline.
BS163B HEAVY DUTY:
For use with Farmall 30B, 35B,
40B and 50B Tractors ONLY
Quick attach design, mid-PTO driven
Overall width: 63 inches (1600mm)
Cutting width: 63 inches (1600mm)
Cutting height: 22 inches (560mm)
Number of blades: 4
Fan diameter: 18 inches (457mm)
Auger diameter: 14 inches (356mm)
Impeller drive: Gear box reduction
Auger Drive: Two-part chute with
manual chute rotation
Shearbolt protection
Adjustable skid shoes
Front mount and drive completion
package. Includes chute with
mechanical rotation, female
portion of quick hitch and
front half of driveline.
BS174H HEAVY DUTY:
For use with Farmall 30B, 35B,
40B and 50B Tractors ONLY
Quick attach design, mid-PTO driven
Overall width: 72 inches (1830mm)
Cutting width: 72 inches (1830mm)
Cutting height: 26 inches (660mm)
Number of blades: 4
Fan diameter: 24 inches (610mm)
Auger diameter: 15 inches (381mm)
Impeller drive: Gear box reduction/
#60 HD chain
Auger Drive: Two-part chute with
manual chute rotation
Shearbolt protection
Adjustable skid shoes
Front mount and drive completion
package. Includes chute with
mechanical rotation, female
portion of quick hitch and
front half of driveline.
8?
-CP1M 01 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
REQUIREMENTS FOR OPERATION:
TRACTOR MID MOUNT PTO IS
REQUIRED. If tractor is not equipped
with Mid Mount PTO, order appropriate
kit from tractor Parts Division Supplied
Accessories chart.
If tractor was not ordered
"Loader Ready" please consult the
Compact Tractor Parts Division
Supplied Accessories chart
for valve and joystick ordering
information.
(Note: On CVT version tractors,
Mid Mount PTO is only available as a
factory installed option.)
FOR FARMALL B TRACTORS:
Tractor comes equipped with
Mid-mount valve and Joystick as
standard equipment
FOR FARMALL 31-50 TRACTORS:
TRACTOR MUST BE EQUIPED WITH
MID MOUNT VALVE AND JOYSTICK in
order to operate loaders, front mount
brooms, front mount blades or front
mount snow blowers.
84
-CP1M 01 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
BS163H FARMALL B
BS163H SNOW BLOWER
BS172H SNOW BLOWER
BS174H FARMALL B
MODEL
Weight
BS163H 63IN
BS163H 63IN COMM HD
BS172H 72IN COMM HD
BS174H 74IN
Factory Data
900 LB
900 LB
900 LB
List Price
9003870P79
9003078P46
9003635P94
9005052P74
$5,027.00
$3,998.00
$4,722.00
$6,562.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME
XN5701X No front mounting brackets
715425
Front quick hitch - Class 2
For Farmall 31 and 35
717751
Front quick hitch - Class 3
For Farmall 40, 45 (HST or CVT) and 50 CVT
717989
Front quick hitch 30/35/40/50
For Farmall 30B, 35B, 40B and 50B
9001106P49
No Charge
$1,437.00
9001451P45
$1,885.00
9001258P95
$1,635.00
35 LB
9000602P91
No Charge
$783.00
7 LB
9000514P36
$668.00
9000514P36
$668.00
9000670P67
$871.00
318 LB
FRONT MOUNTED DRIVE COMPLETING PACKAGE
SD_03007 MID PTO DRIVE KIT
X03007X No Selection
715584
Drive completion kit 715584
For Farmall 31 and 35
717155
MID PTO Drive Kit-III
For Farmall 40 and 45 - HST only
717761
MID PTO Drive Kit-III AT
For Farmall 40, 45 and 50 - CVT Only
717990
MID PTO 30/35/40/50
For Farmall 30B, 35B, 40B and 50B
87
-CP1M 01 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
FRONT MOUNTED FINAL DRIVE COMPLETION
SD_29042 SNOW BLR CONFIG PKG
715346
Finishing package 63"
Front mount completion kit for Farmall 31 and 35 and for
Farmall 30B, 35B, 40B and 50B
715339
Finishing package 72"/74"
Front mount completion kit for:
Farmall 40 and 45 (HST or CVT)
Farmall 50 (CVT) and
Farmall 30B, 35B, 40B and 50B
232 LB
No Charge
220 LB
No Charge
3 PART CHUTE
SD_29036 3 PART CHUTE
X29036X No 3 part chute
715345
3 Part chute
49 LB
9000309P54
No Charge
$402.00
28 LB
9000107P03
No Charge
$139.00
8 LB
9000706P86
No Charge
$918.00
16 LB
9000321P86
No Charge
$418.00
DRIFT CUTTER KIT
SD_50028 DRIFT CUTTER KIT
X50028X No drift cutter
716248
Drift cutter
ELECTRIC CHUTE DEFLECTOR
SD_29038 ELEC CHUTE DEFLECT
X29038X No electric chute deflector
715344
Electric chute deflector
HYDRAULIC CHUTE DEFLECTOR
SD_20101 HYDRAULIC CHUTE DEF
X20101X No hydraulic chute deflector
716864
Hydraulic chute deflector
88
-CP1M 01 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
HYDRAULIC CHUTE ROTATION
SD_20088 HYDRAULIC CHUTE ROT
X20088X No Hydraulic Chute Rotation
717172
Hydraulic chute rotation
11 LB
9000719P18
No Charge
$934.00
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
OTHER EQUIPMENT
SD_40002 BALLAST BOX
X40002X No ballasting box
717746
Ballasting box - 500 lbs.
for 3-pt hitch
100 LB
86
9000174P79
No Charge
$227.00
-CP1M 01 014 000 01-SEP-11
-CP1M 01
BS SERIES FRONT MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Quick Hitch and Subframe
715425026
717751006
717989006
Subframe Cls 2
Quick hitch and subframe for Farmall 31 and 35
SUBFRAME CLS 3
Quick hitch and subframe for Farmall 40, 45 (HST or CVT)
and Farmall 50 (CVT)
SUBFRAME 30/35/40/50 HP
Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
236 LB
9001134P21
$1,473.00
510 LB
9001450P68
$1,884.00
350 LB
9001258P95
$1,635.00
25 LB
9000602P91
$783.00
1 LB
9000513P59
$667.00
30 LB
9000513P59
$667.00
30 LB
9000670P67
$871.00
15 LB
9000707P63
$919.00
15 LB
9000321P86
$418.00
10 LB
9000718P41
$933.00
45 LB
9000309P54
$402.00
205 LB
9001184P26
$1,538.00
128 LB
9001184P26
$1,538.00
28 LB
9000107P80
$140.00
101 LB
9000170P94
$222.00
Mid PTO Drive Completion Kits
715584006
717155016
717761006
717990006
ATTACHMENT, MID PTO DRIVE 60"
Mid PTO drive kit For Farmall 31 and 35
MID PTO Drive Kit Cls 3
For Farmall 40 and 45 with HST only
MID PTO Drive Kit Cls 3 AT
For Farmall 40 and 45, CVT only
MID PTO 30/35/40/50 HP
For Farmall 30B, 35B, 40B and 50B
Additional Attachments
715344006
716864026
717172016
715345006
715346006
715339006
716248006
715655036
Electric chute deflector
For BH163H, BH163B, BH172H or BH174H
Hyd chute deflector
For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H
HYDRAULIC CUTE ROTATION KIT
For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H
3 Part Chute
For BH163H, BH163B, BH172H or BH174H
ATTACHMENT, FRT MTG COMP.
Front mount completion kit (63") for Farmall 31 and 35 and also
for Farmall 30B, 35B, 40B and 50B
FRONT PACKAGE
Front mount completion kit (72") for Farmall 40, 45, and 50 and
also (74") for Farmall 30B, 35B, 40B and 50B
Drift Cutter
For BS172H or BH174H
Ballasting box for 3-point hitch
(Category I) capacity of 400 lbs., for total maximum
weight of 500 lbs,
(For Farmall 31 - 50 tractors and Farmall B tractors) - Ex Works
Wholegoods Depot. This item must be placed on a
separate order. Items ordered under Other Equipment
Section can not also be ordered as a factory supplied
accessory on the same order. A separate order is
necessary if additional quanities are required.
8<
-CP1M 01 014 000 01-SEP-11
-CP1M 02
BS SERIES REAR MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Standard Equipment
BS164R:
For use on Farmall 31 and 35
3-point mounted, two-stage,
rear PTO driven
Overall width: 64 inches (1625mm)
Cutting width: 64 inches (1625mm)
Cutting height: 26 inches (660mm)
Number of blades: 4
Fan diameter: 24 inches (610mm)
Auger diameter: 15 inches (381mm)
Auger drive: #60 chain
Manual or hydraulic chute
rotation optional
Shearbolt protection
Adjustable skid shoes
Hitch, Driveline, Chute
Manual chute rotation kit
BS184R:
For use on
Farmall 40, 45, 50, 55 and 60,
and Farmall 65C tractors
3-point mounted, two-stage,
rear PTO driven
Overall width: 84 inches (2135mm)
Cutting width: 84 inches (2135mm)
Cutting height: 34 inches (660mm)
Number of blades: 4
Fan diameter: 28 inches (711mm)
Auger diameter: 20 inches (508mm)
Auger drive: #60 chain
Manual or hydraulic chute
rotation optional
Shearbolt protection
Adjustable skid shoes
Hitch, Driveline, Chute
Manual chute rotation kit
BS174R:
For use on
Farmall 31, 35, 40, 45, 50, 55 and 60
3-point mounted, two-stage,
rear PTO driven
Overall width: 74 inches (1880mm)
Cutting width: 74 inches (1880mm)
Cutting height: 26 inches (660mm)
Number of blades: 4
Fan diameter: 24 inches (610mm)
Auger diameter: 15 inches (381mm)
Auger drive: #60 chain
Manual or hydraulic chute
rotation optional
Shearbolt protection
Adjustable skid shoes
Hitch, Driveline, Chute
Manual chute rotation kit
8=
-CP1M 02 014 000 01-SEP-11
-CP1M 02
BS SERIES REAR MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Models
COMMERCIAL MODEL
BS164R SNOW BLOWER
BS174R SNOW BLOWER
BS184R SNOW BLOWER
MODEL
Weight
BS164R 64IN CAT 1 3
BS174R 74IN CAT 1 3
BS184R 84IN CAT 1 3
Factory Data
900 LB
900 LB
900 LB
List Price
9002458P61
9003213P21
9003853P85
$3,193.00
$4,173.00
$5,005.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
FRONT MOUNTED FINAL DRIVE COMPLETION
SD_29042 SNOW BLR CONFIG PKG
715343
Manual chute rotation kit
715342
Hydraulic chute rotation kit
Hoses not included, One tractor rear remote valve is required
for operation.
Please consult the appropriate Tractor Model Price List for
valve ordering information.
26 LB
80 LB
9000212P52
No Charge
$276.00
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
No Charge
1 LB
No Charge
No Charge
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
8k
-CP1M 02 014 000 01-SEP-11
-CP1M 02
BS SERIES REAR MOUNT SNOW BLOWERS
US PRICE LIST
(Ex Works Wholegoods Depot)
Factory Supplied Attachments
Order Code
715342036
715342046
715343046
Description
Weight
HYD ROTATION 64IN
HYD ROTATION 74-84IN
MANUAL ROTATION 64-74-84IN
52 LB
73 LB
9 LB
8q
Factory Data
9000365P75
9000365P75
9000153P23
List Price
$475.00
$475.00
$199.00
-CP1M 02 014 000 01-SEP-11
65
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
Standard Equipment
BH90 (7.5 FT DIGGING DEPTH):
For Farmall 31-60,
Farmall 45A, 55A, and
Farmall 30B, 35B, 40B, 50B and
Farmall 65C-95C, and
Farmall 85U-105U
BH102 (8.5 FT DIGGING DEPTH):
For Farmall 31-60,
Farmall 45A, 55A, and
Farmall 30B, 35B, 40B and 50B and
Farmall 65C-95C, and
Farmall 85U-105U
SPECIFICATONS:
Digging Depth: 89.9 inches (2283mm)
Reach from Swing Pivot: 123 inches
(3124mm)
Transport Height: 79 inches (2007mm)
Bucket Rotation: 180º
Stabilizer Spread - Transport: 54 inches
(1372mm)
Stabilizer Spread - Operating: 79 inches
(2007mm)
Swing Arc: 180º
Digging force - Bucket: 2827 lbs
(1282 kg)
Digging force - Dipper: 2020 lbs
(916 kg)
Operating Pressure - 2150 psi
Boom Cylinder - 2.75 x 16.75 in.
Dipperstick Cylinder - 3.00 x 14.00 in.
Bucket Cylinder - 2.00 x 19.25 in.
Swing Cylinder - 2.25 x 8.97 in.
Stabilizer Cylinder - 2.25 x 10.66 in.
SPECIFICATONS:
Digging Depth: 102 inches (2590mm)
Reach from Swing Pivot: 134 inches
(3404mm)
Transport Height: 84.7 inches
(2151mm)
Bucket Rotation: 180º
Stabilizer Spread - Transport: 53 inches
(1346mm)
Stabilizer Spread - Operating: 91 inches
(2311mm)
Swing Arc: 180º
Digging force - Bucket: 4100 lbs
(1860 kg)
Digging force - Dipper: 2130 lbs
(966 kg)
Operating Pressure - 2500 psi
Boom Cylinder - 2.75 x 16.75 in.
Dipperstick Cylinder - 2.75 x 16.75 in.
Bucket Cylinder - 2.25 x 19.25 in.
Swing Cylinder - 2.25 x 8.97 in.
Stabilizer Cylinder - 2.25 x 14.00 in.
Farmall 31-60, Farmall A and
Farmall B include Hydraulic Kit
Farmall 31-60, Farmall A and
Farmall B include Hydraulic Kit
Specifications vary with tractor model,
hydraulic system, tire size, etc.
Specifications vary with tractor model,
hydraulic system, tire size, etc.
6?
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
Standard Equipment
BH114 (9.5 FT DIGGING DEPTH):
For Farmall 55 and 60,
Farmall 65C-95C, and
Farmall 85U-105U
Specifications vary with tractor model,
hydraulic system, tire size, etc.
Requirements for Operation:
The tractor must be equipped with a
front end loader* when installing a
BH Series backhoe.
SPECIFICATIONS:
Digging Depth: 113.5 inches (2883mm)
Reach from Swing Pivot: 149 inches
(3785mm)
Transport Height: 96 inches (2438mm)
Bucket Rotation: 180º
Stabilizer Spread - Transport: 53 inches
(1346mm)
Stabilizer Spread - Operating: 91 inches
(2311mm)
Swing Arc: 180º
Digging force - Bucket: 4100 lbs
(1860 kg)
Digging force - Dipper: 2670 lbs
(1211 kg)
Operating Pressure - 2500 psi
Boom Cylinder - 3.00 x 18.5 in.
Dipperstick Cylinder - 3.00 x 19.75 in.
Bucket Cylinder - 2.25 x 19.25 in.
Swing Cylinder - 2.25 x 8.97 in.
Stabilizer Cylinder - 2.25 x 14.00 in.
* The following front blade / tractor
combination may be used in lieu
of a loader when installing a
BH Series backhoe:
Farmall 31 or 35 plus a BM172 Blade
Farmall 40, 45 or 50 plus a BM172H or
BM184H Blade
Farmall 55 or 60 plus a BM184 Blade
Farmall 30B or 35B plus a
BM172H Blade
Farmall 40B or 50B plus a
BM184H Blade
Farmall 55 and 60 includes hydraulic kit
64
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
Models
COMMERCIAL MODEL
BH90 BACKHOE
BH102 BACKHOE
BH114 BACKHOE
MODEL
Weight
BH90 90 IN
BH102 102 IN
BH114 114 IN
Factory Data
1,200 LB
12,000 LB
1,200 LB
List Price
9005849P69
9007031P64
9009607P29
$7,597.00
$9,132.00
$12,477.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
SUBFRAMES
SD_39024 UPPER LINK CAT I OR
X39024X No 3-Point link Category II
716495
3-Point link Category II
Must be ordered for Category II 3-point applications on
Farmall C and Farmall U tractors.
Used with BH90, BH102, and BH114 backhoes.
SD_N5701 HITCH AND SUBFRAME
XN5701X No front mounting brackets
717977
Front Quick Hitch - Class 2
Subframe for Farmall 31 and 35 tractors
For use with BH90 and BH102 backhoes
715451
Front mounting brackets 715451
Subframe for Farmall 40, 45 and 50 tractors with gear and HST
For use with BH90 and BH102 backhoes.
717751
Front quick hitch - Class 3
Subframe for Farmall 40, 45, and 50 tractors with CVT
For use with BH90 and BH102 backhoes
716394
Subframe 716394
For Farmall 55 and 60 tractors
For BH90, BH102, and BH114 backhoes
717912
Subframe Wrkmstr45/55-FarmallA
For Farmall 45A and 55A tractors only
For BH90 and BH102 backhoes only
717972
Subframe CL2 30/35
For Farmall 30B and 35B tractors only
For BH90 and BH102 backhoes only
67
145 LB
1,200 LB
659 LB
9000406P56
No Charge
$528.00
9000510P51
No Charge
$663.00
9000590P59
$767.00
9000590P59
$767.00
9000605P22
$786.00
9000605P22
$786.00
9000501P27
$651.00
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
717973
Subframe CL3 40/50
For Farmall 40B and 50B tractors only
For BH90 and BH102 backhoes only
9000590P59
$767.00
9000115P50
No Charge
$150.00
HYDRAULIC KITS
SD_20078 HOSE KIT
X20078X No hydraulic hose kit
715743
MMV Hydraulic Hose Kit- 2 func
For Farmall C and Farmall U tractors.
Requires use of one tractor rear remote valve spool with
quick couplers.
Used with BH90, BH102, and BH114 backhoes.
SD_20102 HYDRAULIC KIT
X20102X No rear hitch hydraulic pkg
715396
Hydraulic kit
For Farmall 31 and 35 tractors
715431
Hydraulic valve kit
For Farmall 40, 45 and 50 tractors
715392
Hydraulic kit
For Farmall 55 and 60 tractors
717914
Hyd kit Wrkmstr45/55-FarmallA
For Farmall 45A and 55A tractors only
For BH90 and BH102 backhoes only
717974
HYD Kit CL2 30/35 HP
For Farmall 30B and 35B tractors only
For BH90 and BH102 backhoes only
717975
HYD CL3 40/50 HP GEA
For Farmall 40B and 50B Gear tractors only
For BH90 and BH102 backhoes only
717976
HYD CL3 40/50 HP HST
For Farmall 40B and 50B HST tractors only
For BH90 and BH102 backhoes only
55 LB
18 LB
(900193P27)
($251.00)
No Charge
37 LB
No Charge
20 LB
No Charge
No Charge
9000126P28
$164.00
9000193P27
$251.00
9000193P27
$251.00
9000249P48
No Charge
$324.00
BUCKET
SD_N5401 9 IN STD BUCKET
XN5401X No 9 In Std. Bucket
716398
9 in./229mm standard bucket
2 teeth, .87 cu. ft. heaped.
74 LB
SD_N5403 12 IN STD BUCKET
XN5403X No 12 in std Bucket
No Charge
68
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
716399
12 in./305mm standard bucket
3 teeth, 1.24 cu. ft. heaped
SD_N5404 16 IN HD BUCKET
XN5404X No 16 in HD Bucket
716494
16 in./406mm heavy-duty bucket
3 teeth, 1.76 cu. ft. heaped
SD_N5407 18 IN STD BUCKET
XN5407X No 18 in. Standard Bucket
716434
18 in./457mm standard bucket
4 teeth, 2.02 cu. ft. heaped
SD_N5408 24 IN HD BUCKET
XN5408X No 24 Inch HD Bucket
716493
24 in./609mm heavy-duty bucket
5 teeth, 2.82 Cu. Ft. heaped
SD_N5410 36 IN GRAVE BUCKET
XN5410X No 36 in. grave bucket
716435
36 in./914 mm grave bucket
6 teeth, 4.00 cu. ft. heaped
SD_N5411 36 IN MUCK BUCKET
XN5411X No 36 in. muck bucket
716436
36 in./914 mm muck bucket
6 teeth, 4.00 cu. ft. heaped
107 LB
9000364P98
$474.00
171 LB
9000403P48
No Charge
$524.00
128 LB
9000420P42
No Charge
$546.00
214 LB
9000472P01
No Charge
$613.00
181 LB
9000492P80
No Charge
$640.00
178 LB
9000492P80
No Charge
$640.00
65 LB
9000117P81
No Charge
$153.00
18 LB
9000169P40
No Charge
$220.00
FACTORY SUPPLIED ACCESSORIES - IMPLEMENTS FOR
COMPACT/MIDRANGE TRACTORS
SD_50005 BIG FOOT DIRT PADS
X50005X No big foot dirt pads
716525
Big foot dirt pads
12 in. square
SD_50092 RUBBER STREET PADS
X50092X No rubber street pads
716410
Rubber street pads
OPERATOR'S MANUAL
SD_47012 OPERATOR'S MANUAL
725847
North American English
1 LB
66
No Charge
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL
X47083X Language Manual English
715294
French Canadian 715294
No Charge
No Charge
1 LB
OTHER EQUIPMENT
SD_03008 PTO PUMP AND RESERV
X03008X No PTO pump and reservoir
716411
PTO pump and reservoir
11.0 GPM PTO pump. For use with BH114 backhoe on
Farmall C and Farmall U tractors.
SD_N6413 MECH THUMB
XN6413X No mechanical thumb
717916
Mechanical thumb
For BH90, BH102, and BH114 backhoe buckets
6<
133 LB
9001007P16
No Charge
$1,308.00
9000433P51
No Charge
$563.00
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Subframes
717977006
715451156
717751016
716394036
717912006
717972006
717973006
716495026
FRONT QCK HITCH CL2
For Farmall 31 and 35 tractors
For use with BH90 and BH102 backhoes.
SUBFRAME FOR CL3
For Farmall 40 and 45 tractors - HST only
SUBFRAME CLS 3 AT
Subframe for tractors with Constantly Variable Transmission (CVT)
only
SUBFRAME FOR NHW STYLED CL4
For Farmall 55 and 60 Tractors
SUBFRAME TT/FARMALL A
For Farmall 45A and 55A tractors
SUBFRAME CLS 2 30/35 HP
For Farmall 30B and 35B tractors
SUBFRAME CLS 3 40/50 HP
For Farmall 40B and 50B tractors
UPPER LINK CAT I OR CAT II 3-P
Must be ordered for 3-point applications
on Farmall C and Farmall U Tractors (used with BH114 only)
268 LB
9000511P28
$664.00
256 LB
9000589P82
$766.00
510 LB
9000589P82
$766.00
220 LB
9000605P99
$787.00
320 LB
9000647P57
$841.00
315 LB
9000501P27
$651.00
320 LB
9000590P59
$767.00
145 LB
9000406P56
$528.00
12 LB
9000193P27
$251.00
12 LB
9000193P27
$251.00
12 LB
9000193P27
$251.00
20 LB
9000200P97
$261.00
315 LB
9000126P28
$164.00
35 LB
9000193P27
$251.00
35 LB
9000193P27
$251.00
10 LB
9000114P73
$149.00
54 LB
9001007P16
$1,308.00
46 LB
9000249P48
$324.00
Hydraulic Kits
715396026
715431026
715392016
717914006
717974006
717975006
717976006
715743006
716411016
HYD KIT FOR CLS 2
For Farmall 31 and 35 tractors
HYD SNGL LEVR FAR 31& 35
Hydraulic kit for Farmall 40, 45, and 50 tractors
HYD KIT FOR CLS 4
Hydraulic kit for Farmall 55 and 60 tractors
HYD KIT TT/FARMALL A
For Farmall 45A and 55A tractors
HYD KIT CLS 2 30/35 HP
For Farmall 30B and 35B tractors
HYD KIT CLS 3 40/50 HP GEAR
For Farmall 40B and 50B Gear tractors
HYD KIT CLS 3 40/50 HP HST
For Farmall 40B and 50B HST tractors
HYD. HOSE KIT
For Utility tractors and larger
Requires use of one tractor rear remote valve spool with quick
couplers
11.0 GPM PUMP FOR UTILITY TRAC
for use with BH114 backhoe on Farmall C and Farmall U
Tractors
Buckets BH172 Only
716398006
STD BUCKET 9" 2 TEETH
Standard .87 Cu.Ft. heaped. For BH172 only.
Subject to available inventory.
6=
-CP1N 01 014 000 01-SEP-11
-CP1N 01
BH SERIES BACKHOES
US PRICE LIST
(Ex Works Sioux Falls, SD)
716433016
716494036
HVY DTY BUCKET 12" 3 TEETH
1.24 Cu. Ft. heaped. For BH172 only.
Subject to available inventory.
HVY DTY BUCKET 16" 3 TEETH
Heavy-duty 1.76 Cu. Ft. heaped. For BH172 only.
Subject to available inventory.
72 LB
9000364P21
$473.00
82 LB
9000415P80
$540.00
46 LB
9000249P48
$324.00
72 LB
9000364P98
$474.00
82 LB
9000403P48
$524.00
84 LB
9000420P42
$546.00
86 LB
9000472P01
$613.00
114 LB
9000492P80
$640.00
130 LB
9000492P80
$640.00
52 LB
9000123P97
$161.00
5 LB
5 LB
9000178P64
9000376P53
$232.00
$489.00
82 LB
9000433P51
$563.00
Buckets BH90, BH102, and BH114
716398016
716399026
716494066
716434036
716493046
716436036
716435046
BUCKET-STD 9" 2 TEETH .87 CU.
Standard .87 Cu.Ft. heaped.
BUCKET-STD 12" 3 TEETH 1.24 CU
Standard 1.24 Cu.Ft. heaped
BUCKET-HD 16" 3 TEETH 1.76 CU
Heavy-duty 1.76 Cu. Ft. heaped
BUCKET-STD 18" 4 TEETH 2.02 CU
2.02 Cu. Ft. heaped
BUCKET-HD 24" 5 TEETH 2.82 CU
Heavy-duty 2.82 Cu. Ft. heaped
BUCKET-MUCK 36" 6 TTH 4.00 CU
4.00 Cu. Ft. heaped
BUCKET-GRAVE 36" 6 TTH 4.00 CU
4.00 Cu. Ft. heaped
Additional Attachments
716525026
716410016
716849006
717916016
BIG FOOT DIRT PADS
12 in. square
STREET PAD 172,190,1102
STABILIZER HYD LOCKOUT VALVE K
For BH172 only. Subject to available inventory.
MECHANICAL THUMB 7.5/8.5/9.5 F
6k
-CP1N 01 014 000 01-SEP-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
ROTARY CUTTER - ECONOMY
(3-POINT):
ROTARY CUTTER - STANDARD DUTY
(3-POINT):
RC480:
Cutting Width: 48 in.
Cutting Height: 1 in. (min.)
Cutting Capacity: 2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 10 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Shear Pin
Tire and Wheel: Laminated
1 spindle
RC605:
Cutting Width: 60 in.
Cutting Height: 2 1/2 in. (min.)
Cutting Capacity: 2 1/2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Splined Slip Clutch
Tire and Wheel: Laminated
1 spindle
Single tail wheel
RC600:
Cutting Width: 60 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Shear Pin
Tire and Wheel: Laminated
1 spindle
RC725:
Cutting Width: 83 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 2 1/2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Slip Clutch
Tire and Wheel: Laminated
1 spindle
Single tail wheel
RC720:
Cutting Width: 72 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Shear Pin
Tire and Wheel: Laminated
1 spindle
RC840:
Cutting Width: 83 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 2 1/2 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Rear Rubber Belting
Driveline Size: Cat. 4 - 540 rpm
Slip Protection: Slip Clutch
Tire and Wheel: Laminated
1 spindle
Single tail wheel
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
ROTARY CUTTER - HEAVY DUTY
(3-POINT):
ROTARY CUTTER - HEAVY DUTY
(3-POINT): (continued)
RC727:
Cutting Width: 72 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Front and Rear
Chains
Driveline Size: Cat. 5 - 540 rpm
Slip Protection: Splined Slip Clutch
Tire and Wheel: Laminated
1 spindle
Single tail wheel
RC845:
Cutting Width: 84 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Front and Rear
Chains
Driveline Size: Cat. 5 - 540 rpm
Slip Protection: Splined Slip Clutch
Tire and Wheel: Laminated
1 spindle
Single tail wheel
RC960:
Cutting Width: 96 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 3/16 x 7 gauge
Safety Deflectors: Front and Rear
Chains
Driveline Size: Cat. 5 - 540 rpm
Slip Protection: Slip Clutch
Tire and Wheel: Laminated
2 spindle
Dual tail wheel
ROTARY CUTTER - HEAVY DUTY
(PULL-TYPE):
RC1200:
Cutting Width: 120 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Front and Rear
Chains
Main Driveline: Cat. 5 CV w/
Slip Clutch - 540 rpm
Tire and Wheel: Laminated
2 spindle
RC84HD:
Cutting Width: 84 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 4 in. (max.)
Blade Carrier: Pan
Deck Thickness: 3/16 x 7 gauge
Safety Deflectors: Front and Rear
Chains
Driveline Size: Cat. 5 - 540 rpm
Slip Protection: Slip Clutch
Tire and Wheel: Laminated
1 spindle
Dual tail wheel
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
ROTARY CUTTER - HEAVY DUTY
(PULL-TYPE): (continued)
RC1800 - 540 rpm driveline:
(Standard and
Smooth Top/Double Deck)
Cutting Width: 180 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Front and Rear
Chains
Main Driveline: Cat. 5 CV w/
Slip Clutch 540 rpm
Outboard Drivelines to wings:
Cat. 4 w/Slip Clutch
Tire and Wheel: Laminated
3 spindle
REQUIREMENTS FOR OPERATION:
Tractor Horsepower (Max.):
RC480 - up to 48
RC600 - up to 48
RC720 - up to 48
RC605 - up to 65
RC725 - up to 65
RC840 - up to 65
RC727 - up to 95
RC845 - up to 95
RC84HD - up to 140
RC960 - up to 140
RC1200 - up to 150
RC1800 - up to 210
RC1800 - 1000 rpm driveline:
(Standard and
Smooth Top/Double Deck)
Cutting Width: 180 in.
Cutting Height: 2 in. (min.)
Cutting Capacity: 3 in. (max.)
Blade Carrier: Pan
Deck Thickness: 7 gauge
Safety Deflectors: Front and Rear
Chains
Main Driveline: Cat. 5 CV w/ Slip Clutch
1000 rpm - 1 3/8 in. shaft
1000 rpm - 1 3/4 in. shaft
Outboard Drivelines to wings:
Cat. 4 w/Slip Clutch
Tire and Wheel: Aircraft (used)
3 spindle
Hydraulic level lift
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
Models
COMMERCIAL MODEL
RC480 ROTARY CUTTR
RC600 ROTARY CUTTR
RC720 ROTARY CUTTR
RC605 ROTARY CUTTR
RC725 ROTARY CUTTR
RC840 ROTARY CUTTR
RC727 ROTARY CUTTR
RC845 ROTARY CUTTR
RC84HD ROTARY CUTTR
RC960 ROTARY CUTTR
RC1200 ROTARY CUTTR
RC1800 540RPM
RC1800 1000RPM 1-3/8
RC1800 1000RPM 1-3/4
RC1800 540RPM DD
RC1800 1000 1-3/8 DD
RC1800 1000 1-3/4 DD
MODEL
Weight
48 in. standard-duty
60 in. standard-duty
72 in. standard-duty
60 in. medium-duty
72 in. medium-duty
84 in. medium-duty
72 in. HD single tail
84 in. HD single tail
84 in. HD dual tail
96 in. HD dual tail
540 rpm, 120 in.
540 rpm, 180 in.
1000 rpm 180 in.1-3/8 in. shft
1000 rpm 180 in.1-3/4 in. shft
540rpm, 180 in. Dbl Deck
1000rpm,180in.1-3/8 Dbl Deck
1000rpm,180in.1-3/4 Dbl Deck
Factory Data
5,894 LB
781 LB
885 LB
885 LB
903 LB
1,400 LB
1,193 LB
1,193 LB
1,680 LB
1,749 LB
1,749 LB
1,749 LB
5,594 LB
1,749 LB
1,749 LB
5,594 LB
1,749 LB
List Price
9001114P96
9001290P52
9001576P19
9001857P24
9002094P40
9002414P72
9002629P55
9003599P75
9005312P23
9005882P03
9008077P30
9014043P26
9016087P61
9016087P61
9016226P98
9018018P77
9018018P77
$1,448.00
$1,676.00
$2,047.00
$2,412.00
$2,720.00
$3,136.00
$3,415.00
$4,675.00
$6,899.00
$7,639.00
$10,490.00
$18,238.00
$20,893.00
$20,893.00
$21,074.00
$23,401.00
$23,401.00
Factory Supplied Options
Order Code
Description
Weight
Factory Data
List Price
OTHER EQUIPMENT
SD_16049 EXTRA WHEELS AND TIRES
X16049X No extra wheels and tires
717984
Aircraft Tires (2)
Available on RC1800 with 1000RPM driveline
717985
Aircraft Tires (6)
Available on RC1800 with 540RPM driveline
717986
Aircraft Tires (8)
Available on RC1800 with 540RPM driveline
717987
Foam Filled P Tire 6
Available on all RC1800 Models
717988
Foam Filled P Tire 8
Available on all RC1800 Models
9000325P71
No Charge
$423.00
9000977P13
$1,269.00
9001308P23
$1,699.00
9001308P23
$1,699.00
9001650P11
$2,143.00
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
SD_N6428 FRONT SAFETY CHAINS
XN6428X No FR Safety Chains
717979
Front Safety Chains
Available on RC480, RC600 and RC720
SD_N6429 REAR SAFETY CHAINS
XN6429X No Rear Safety Chain
717980
Rear Safety Chains
Available on RC480, RC600 and RC720
SD_N6430 SLIP CLUTCH
XN6430X No Slip Clutch
717981
Slip Clutch
Available on RC480, RC600 and RC720
SD_N6431 DUAL TAIL WHEEL
XN6431X No Dual Tail Wheel
717982
Dual Tail Wheel
Available on RC605, RC725, RC727, RC840, RC845, and RC1800
SD_N6432 HYD LIFT
XN6432X No HYD Lift
717983
HYD Lift
Available on RC1800 with 540RPM driveline
SD_N6433 COATING
XN6433X No Coating
717991
Galvanized
if MODEL is 84 in. medium-duty
if MODEL is 60 in. standard-duty
if MODEL is 72 in. medium-duty
if MODEL is 48 in. standard-duty
if MODEL is 60 in. medium-duty
if MODEL is 72 in. standard-duty
if MODEL is 84 in. HD single tail
if MODEL is 72 in. HD single tail
if MODEL is 540 rpm, 120 in.
if MODEL is 96 in. HD dual tail
if MODEL is 84 in. HD dual tail
if MODEL is 540 rpm, 180 in.
if MODEL is 540rpm, 180 in. Dbl Deck
if MODEL is 1000 rpm 180 in.1-3/4 in. shft
if MODEL is 1000 rpm 180 in.1-3/8 in. shft
if MODEL is 1000rpm,180in.1-3/4 Dbl Deck
if MODEL is 1000rpm,180in.1-3/8 Dbl Deck
9000137P83
No Charge
$179.00
9000137P83
No Charge
$179.00
9000165P55
No Charge
$215.00
9000395P01
No Charge
$513.00
9000957P11
No Charge
$1,243.00
No Charge
9000079P31
9000079P31
9000079P31
9000079P31
9000079P31
9000079P31
9000197P12
9000197P12
9000197P12
9000197P12
9000197P12
9000592P13
9000592P13
9000592P13
9000592P13
9000592P13
9000592P13
$103.00
$103.00
$103.00
$103.00
$103.00
$103.00
$256.00
$256.00
$256.00
$256.00
$256.00
$769.00
$769.00
$769.00
$769.00
$769.00
$769.00
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
SD_N6436 QUICK ATTACH HITCH
XN6436X No Quick Attach Hitch
439026
Quick Attach Hitch
Availiable on RC480, RC600, RC605, RC720, RC725, RC727,
RC840, RC845, RC84HD, RC960
9000059P29
No Charge
$77.00
-CP1T 01 015 000 12-OCT-11
-CP1T 01
RC ROTARY CUTTERS
US PRICE LIST
(Ex Works Beaumont, TX)
Factory Supplied Attachments
Order Code
Description
Weight
Factory Data
List Price
Front Safety Chains
717979006
717979016
717979026
48" Front safety chains
Available on RC480
60" Front safety chains
Available on RC600
72" Front safety chains
Available on RC720
27 LB
9000137P83
$179.00
29 LB
9000137P83
$179.00
33 LB
9000137P83
$179.00
42 LB
9000137P83
$179.00
44 LB
9000137P83
$179.00
48 LB
9000137P83
$179.00
Rear Safety Chains
717980006
717980016
717980026
48" Rear safety chains
Available on RC480
60" Rear safety chains
Available on RC600
72" Rear safety chains
Available on RC720
$
-CP1T 01 015 000 12-OCT-11
%
-CP1U 01
WORK EZ® DISK HARROW
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
78 IN. DISK HARROW:
Number of Disk Blades: 20 notched
(front and rear)
Disk Blade Size: 18 in. diameter
Disk Blade Spacing: 5 1/2 in. F, 6 1/2 in.,
7 1/2 in. R
Maximum Cutting Depth: 6 in.
Cutting Width: 70 in.
Overall Length: 60 in.
Overall Width: 79 in.
Bearing Lubrication: sealed bearings
Adjustable gang angle
REQUIREMENTS FOR OPERATION:
Tractor Horsepower (Min./Max.): 20 - 60
Hitch: Cat. I EZ Match™ compatible
<6
-CP1U 01 014 000 01-SEP-11
-CP1U 01
WORK EZ® DISK HARROW
US PRICE LIST
(Ex Works Beaumont, TX)
Models
COMMERCIAL MODEL
WORK EZ DISK HARROW
MODEL
Weight
EZ78DC 78in Disk Harrow
678 LB
<<
Factory Data
9001687P84
List Price
$2,192.00
-CP1U 01 014 000 01-SEP-11
-CP1V 01
WORK EZ® RAKES
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
LANDSCAPE RAKE:
Rake Width:
60LR - 60 in.
72LR - 72 in.
84LR - 84 in.
Tine Spacing: 1 in.
Tine Size: 5/16 x 1 in.
Tine Material: high carbon spring steel
Angle: 5 forward / 3 reverse
Rake Pivot: 360°
Pivot King Pin: 1 1/4 in.
REQUIREMENTS FOR OPERATION:
Maximum Tractor Horsepower: 50
Hitch: Cat. I EZ Match™ compatible
<=
-CP1V 01 014 000 01-SEP-11
-CP1V 01
WORK EZ® RAKES
US PRICE LIST
(Ex Works Beaumont, TX)
Models
COMMERCIAL MODEL
WORK EZ 60LR RAKE
WORK EZ 72LR RAKE
WORK EZ 84LR RAKE
MODEL
Weight
EZ60L 60in Landsc Rake
EZ72LR 72in Landsc Rake
EZ84LR 84in Rock Rake
245 LB
269 LB
326 LB
<k
Factory Data
9000643P72
9000733P81
9001003P31
List Price
$836.00
$953.00
$1,303.00
-CP1V 01 014 000 01-SEP-11
-CP1W 01
WORK EZ® BOX BLADES
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
BOX BLADES:
BOX BLADES: (continued)
STANDARD DUTY (For Estate and
Homeowners):
INDUSTRIAL (For Contractors):
OPTIONAL hydraulic raise/lower shank
bar (infinite adjustment)
Number of Scarifiers (Shanks): 8
Overall Height: 36 in.
Box Depth: 19 in.
Cutting Edge: 1/2 x 6 in., Reversible
Number of Cutting Edges: 2
Shank Adjustment: manual
Side Plate (Endplate) Thickness:
3/4 in.
Hinges Rear Flat with Cutting Edge:
Standard
Number of Scarifiers (Shanks): 4 to 5
Overall Height: 35 1/2 in.
Box Depth: 17 in.
Cutting Edge: 1/2 x 6 in., Reversible
Number of Cutting Edges: 2
Shank Adjustment: manual
Side Plate (Endplate) Thickness:
3/16 in.
Hinges Rear Flat with Cutting Edge: n/a
MEDIUM DUTY (For Landscapers):
OPTIONAL hydraulic raise/lower shank
bar (infinite adjustment)
Number of Scarifiers (Shanks): 6
Overall Height: 36 in.
Box Depth: 17 in.
Cutting Edge: 1/2 x 6 in., Reversible
Number of Cutting Edges: 2
Shank Adjustment: manual
Side Plate (Endplate) Thickness:
3/8 in.
Hinges Rear Flat with Cutting Edge: n/a
REQUIREMENTS FOR OPERATION:
Tractor Horsepower (Max.):
48BL - up to 28 2wd / 20 4wd
60BL - up to 28 2wd / 20 4wd
60BM - up to 50 2wd / 40 4wd
72BM - up to 50 2wd / 40 4wd
84BM - up to 50 2wd / 40 4wd
72BH - up to 75 2wd / 55 4wd
84BH - up to 75 2wd / 55 4wd
96BI - up to 100 2wd / 80 4wd
HEAVY DUTY (For Contractors):
3 Pt. Hitch:
48BL - Cat. I EZ Match™ compatible
60BL - Cat. I EZ Match™ compatible
60BM - Cat. I
72BM - Cat. I
84BM - Cat. I
72BH - Cat. I
84BH - Cat. I
96BI - Cat. II
OPTIONAL hydraulic raise/lower shank
bar (infinite adjustment)
Number of Scarifiers (Shanks): 6
Overall Height: 36 in.
Box Depth: 19 in.
Cutting Edge: 1/2 x 6 in., Reversible
Number of Cutting Edges: 2
Shank Adjustment: manual
Side Plate (Endplate) Thickness:
1/2 in.
Hinges Rear Flat with Cutting Edge:
Standard
<q
-CP1W 01 014 000 01-SEP-11
-CP1W 01
WORK EZ® BOX BLADES
US PRICE LIST
(Ex Works Beaumont, TX)
Models
COMMERCIAL MODEL
WORK EZ 48BL BLADE
WORK EZ 60BL BLADE
WORK EZ 60BM BLADE
WORK EZ 60BM BLADE
WORK EZ 72BM BLADE
WORK EZ 72BM BLADE
WORK EZ 84BM BLADE
WORK EZ 84BM BLADE
WORK EZ 72BH BLADE
WORK EZ 72BH BLADE
WORK EZ 84BH BLADE
WORK EZ 84BH BLADE
WORK EZ 96BI BLADE
WORK EZ 96BI BLADE
MODEL
Weight
48in 3pt Box Std Duty
60in 3pt Box Std Duty
60in 3pt Box Med Duty
60in 3pt Box Med Duty - Hydr
72in 3pt Box Med Duty
72in 3pt Box Med Duty - Hydr
84in 3pt Box Med Duty
84in 3pt Box Med Duty - Hydr
72in 3pt Box Hvy Duty
72in 3pt Box Hvy Duty - Hydr
84in 3pt Box Hvy Duty
84in 3pt Box Hvy Duty - Hydr
96in 3pt Box Ind Duty
96in 3pt Box Ind Duty - Hydr
Factory Data
313 LB
387 LB
484 LB
484 LB
543 LB
701 LB
603 LB
603 LB
704 LB
704 LB
803 LB
803 LB
1,153 LB
1,153 LB
List Price
9000662P20
9000739P97
9000900P13
9001364P44
9000965P58
9001429P89
9001101P87
9001566P95
9001449P14
9002063P60
9001645P49
9002260P72
9002018P94
9002838P99
$860.00
$961.00
$1,169.00
$1,772.00
$1,254.00
$1,857.00
$1,431.00
$2,035.00
$1,882.00
$2,680.00
$2,137.00
$2,936.00
$2,622.00
$3,687.00
Factory Supplied Options
Order Code
Description
Weight
SD_N6433 COATING
XN6433X No Coating
717991
Galvanized
Factory Data
9000069P30
=5
List Price
No Charge
$90.00
-CP1W 01 014 000 01-SEP-11
-CP1X 01
WORK EZ® REAR BLADES
US PRICE LIST
(Ex Works Beaumont, TX)
Standard Equipment
REAR BLADES:
REQUIREMENTS FOR OPERATION:
STANDARD UTILITY (For Estate and
Homeowners):
Moldboard Width: 60 in. / 72 in.
Cutting Edge: 1/2 in. x 6 in.
Offset Adjustment: 12 in.
Tilt Adjustment: n/a
Angle Adjustment: 5 Forward / 3
Reverse positions
Tractor Horsepower (max.):
60SL - 30
72SL - 30
60SM - 40
72SM - 40
84SM - 40
72SH - 65
84SH - 65
96SI
- 100
108SI - 100
96SHI - 225
120SHI - 225
144SHI - 225
MEDIUM DUTY (For Landscapers, Farm,
or Ranch):
Moldboard Width: 60 in. / 72 in. / 84 in.
Cutting Edge: 1/2 in. x 6 in.
Offset Adjustment: 12 in.
Tilt Adjustment: 45° / E side
Angle Adjustment: 5 Forward / 3
Reverse positions
3 Pt. Hitch:
60SL - Cat. I EZ Match™ compatible
72SL - Cat. I EZ Match™ compatible
60SM - Cat. I EZ Match™ compatible
72SM - Cat. I EZ Match™ compatible
84SM - Cat. I EZ Match™ compatible
72SH - Cat. I/II
84SH - Cat. I/II
96SI
- Cat. II
108SI - Cat. II
96SHI
- Cat. II/III
120SHI - Cat. II/III
144SHI - Cat. II/III
HEAVY DUTY (For Contractors):
Moldboard Width: 84 in. / 96 in.
Cutting Edge: 1/2 in. x 6 in.
Offset Adjustment: 12 in.
Tilt Adjustment: 30°
Angle Adjustment: 5 Forward / 3
Reverse positions
INDUSTRIAL (For Contractors):
Moldboard Width: 96 in. / 108 in.
Cutting Edge: 1/2 in. x 6 in.
Offset Adjustment: 12 in.
Tilt Adjustment: 15°
Angle Adjustment: 30°
HEAVY INDUSTRIAL (For Contractors):
Moldboard Width: 96 in./120 in./144 in.
Cutting Edge: 1/2 in. x 6 in.
Offset Adjustment: 24 in.
Tilt Adjustment: 15°
Angle Adjustment: 30°
=?
-CP1X 01 014 000 01-SEP-11
-CP1X 01
WORK EZ® REAR BLADES
US PRICE LIST
(Ex Works Beaumont, TX)
Models
COMMERCIAL MODEL
WORK EZ 60SL BLADE
WORK EZ 72SL BLADE
WORK EZ 60SM BLADE
WORK EZ 72SM BLADE
WORK EZ 84SM BLADE
WORK EZ 84SH BLADE
WORK EZ 96SH BLADE
WORK EZ 96SI BLADE
WORK EZ 108SI BLADE
WORK EZ 96SHI BLADE
WORK EZ 120SHI BLADE
WORK EZ 144SHI BLADE
MODEL
Weight
60in 3pt Rear Std Utly
72in 3pt Rear Std Utly
60in 3pt Rear Med Duty
72in 3pt Rear Med Duty
84in 3pt Rear Med Duty
84in 3pt Rear Hvy Duty
96in 3pt Rear Hvy Duty
96in 3pt Rear Ind Duty
108in 3pt Rear Ind Duty
96in 3pt Rear Hvy Industrial
108in 3pt Rear Hvy Industrial
144in 3pt Rear Hvy Industrial
163 LB
177 LB
256 LB
278 LB
297 LB
584 LB
679 LB
1,074 LB
1,113 LB
2,120
2,260
2,400
=4
Factory Data
9000586P74
9000622P93
9000671P44
9000766P92
9000858P55
9000966P35
9001054P13
9003073P84
9003508P12
9007345P80
9007661P50
9007974P12
List Price
$762.00
$809.00
$872.00
$996.00
$1,115.00
$1,255.00
$1,369.00
$3,992.00
$4,556.00
$9,540.00
$9,950.00
$10,356.00
-CP1X 01 014 000 01-SEP-11
-CP2A 01
WORK EZ® EZ MATCH™
US PRICE LIST
(Distribution Center)
Standard Equipment
The WORK EZ® EZ Match™ Quick Hitch
is designed to make changing from one
3-point hitch attachment to another quick
and EZ! The upper hook easily slips into
position and simply lock the lower hooks
with quick flip of two handles - many
times from the comfort and convenience
of the tractor seat.
The following Case-IH products are
quick hitch compatible:
EZ78DC - 78 in.
EZ60LR - 60 in.
EZ72LR - 72 in.
EZ84LR - 84 in.
EZ48BL - 48 in.
EZ60BL - 60 in.
EZ60SL - 60 in.
Rear Blade
EZ72SL - 72 in.
Rear Blade
EZ60SM - 60 in.
Rear Blade
EZ72SM - 72 in.
Rear Blade
EZ84SM - 84 in.
Rear Blade
Designed for use on Category 1, 3-point
hitch tractors and implements
Heavy-duty steel construction
Lower arms lock automatically
Fast, easy attachment and release
Designed to ASAE S278.7 Quick Hitch
standards
MODEL: WORK EZ® EZ Match™
Width (inches) - 28 center to center
(Hooks are 1-1/2 " wide)
Height (inches) - 24
Weight (pounds) - 80
Maximum Horsepower - 60
=7
Disk Harrow
Landscape Rake
Landscape Rake
Rock Rake
Standard Duty Box Blade
Standard Duty Box Blade
Standard Utility
Standard Utility
Medium Duty
Medium Duty
Medium Duty
-CP2A 01 014 000 01-SEP-11
-CP2A 01
WORK EZ® EZ MATCH™
US PRICE LIST
(Distribution Center)
Models
COMMERCIAL MODEL
WORK EZ EZ MATCH
Weight
400 LB
=8
Factory Data
9000232P54
List Price
$302.00
-CP2A 01 014 000 01-SEP-11
-CP2B 01
WORK EZ® BALE CARRIERS
US PRICE LIST
Standard Equipment
WORK EZ® Bale Carriers and Spears
are designed to compliment compact
and utility tractors equipped with 3-point
hitch for handling round and square hay
bales. The WORK EZ® Bale Carriers
and Spears are also Work EZ® - EZ
Match™ compatible.
MODEL: Work EZ® Bale Spear
Application - Standard duty
Weight - 98 lbs
Weight rating - 2000 lbs
Tractor Horsepower (max) - 60
Hitch - Cat. I
Hot dipped galvanized frame
Replaceable high carbon steel spear
Two welded bottom stabilizing spears
MODEL: Work EZ® Bale Carrier
Application - Standard duty
Weight - 155 lbs
Weight rating - 2000 lbs
Tractor horsepower (max) - 60
Hitch - Cat. I
Hot dipped galvanized frame
NOTE: Fork tines go under bale
=6
-CP2B 01 014 000 01-SEP-11
-CP2B 01
WORK EZ® BALE CARRIERS
US PRICE LIST
Models
COMMERCIAL MODEL
WORK EZ BALE CARRIER
WORK EZ BALE SPEAR
Weight
88 LB
155 LB
=<
Factory Data
9000311P08
9000343P42
List Price
$404.00
$446.00
-CP2B 01 014 000 01-SEP-11
-CP2B 02
WORK EZ® HAY SPEARS
US PRICE LIST
Standard Equipment
WORK EZ® Hay Spears are designed to
compliment most tractors and skid
steers that are Universal Quick Hitch
Compatible for handling round and
square hay bales.
MODEL: Work EZ® Double Bale Quick
Attach
Application - Standard duty
Weight - 168 lbs
Weight rating - 2000 lbs
Tractor Horsepower (max) - 80
Hitch - Universal Q/A
Hot dipped galvanized frame
Two replaceable high carbon steel
spears
One welded top stabilizing spear
MODEL: Work EZ® Single Bale Quick
Attach
Application - Standard duty
Weight - 153 lbs
Weight rating - 2000 lbs
Tractor Horsepower (max) - 80
Hitch - Universal Q/A
Hot dipped galvanized frame
Replaceable high carbon steel spear
Two welded bottom stabilizing spears
==
-CP2B 02 014 000 01-SEP-11
-CP2B 02
WORK EZ® HAY SPEARS
US PRICE LIST
Models
COMMERCIAL MODEL
WORKEZ SNGL BALE QA
WORKEZ DBL BALE QA
Weight
168 LB
153 LB
=k
Factory Data
9000559P02
9000642P95
List Price
$726.00
$835.00
-CP2B 02 014 000 01-SEP-11