Supplementary Information
TECHNICAL DATA SHEET
PC SOLVENT
TECHNICAL DATA SHEET
DESCRIPTION
PC SOLVENT is a clear, mobile, hygroscopic liquid at
room temperature.
ADVANTAGES





Safe to use
Softens crystallised MDI material
Low odour
Non-flammable
Low VOC’s
APPLICATIONS
 Replacing MDI (A component in many polyurea systems) in
plural spray equipment prior to period of inactivity. Softens built
up and hard deposits and conditions seals, pumps and hoses.
 Excellent solvent for many organic and inorganic materials in
such applications as surface cleaners, degreasers, dyes, fibres,
plastics, batteries, aromatic hydrocarbons and natural gas.
PHYSICAL PROPERTIES
RESULTS
Ash, wt. %
1:2
Autoignition temperature, °C
430
Boiling point, °C
242
Dielectric constant, esu, 25°C
65
Flash point, PMCC, °C
135
LEL, (v/v) at 200°C, %
4.7
Melting point, °C
- 49
pH
7
Specific gravity, 20/20°C
1.2
Specific resistance, ohm-cm 25°C
1-8x106
UEL, (v/v) at 200°C, %
21
Vapor pressure, mm Hg, 20°C
0.02
Viscosity, Kinematic, cSt, 43.3 °C
1.6
VOC Content by ASTM D2369
Water Solubility (%)
VOC Exempt
1-10
PROPERTIES
PROPERTIES
Test
Method
Specification
Appearance
ST-30.1
Clear liquid
Color, Pt-Co
ST-30.12
40 max.
Propylene Carbonate, wt.
%
ST-35.114
>80 min
Water, wt. %
ST-31.53
0.10 max
Liquimix Pty. Ltd.
1/29 Collinsvale St, Rocklea, Queensland 4106, Australia
Tel +61 7 3277 6655 Fax +61 7 3009 0558 www.liquimix.com
The above information is offered in good faith based on LiquiMix’s current knowledge and experience. Materials, substrates and site conditions vary widely and as such no
warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this
information, or from any written recommendations, or from any other advice offered. Therefore the accuracy or completeness thereof is not guaranteed and no warranty of any
kind is made with respect thereto. All orders are accepted subject to our standard terms & conditions of sale. Refer to the latest copy of this technical data sheet prior to use.
Page 1 of 1