CONGRATULATIONS on your purchase of the Pool Pouch, the quick and easy way to keep
POOL BLASTER
POOL
POUCH
Swim Accessory Organizer
TM
all of your pool accessories in one place! As with all Water Tech products, the Pool Pouch has been
tested using our exacting quality control standards to ensure that you have received the highest quality product available.
Setting Up Your Pool Pouch
To set up your Pool Pouch, follow these easy steps:
Step 1.
Remove the Pool Pouch from the packaging and unfold the Pool Pouch allowing it to
expand to its full size.
Step 2.
Insert the included support tubes into the sleeves located in the four corners of the Pool
Pouch. Two tubes in the top and two tubes in the bottom.
Product Set Up Guide
Enclosed in the packaging of your Pool Pouch includes:
1 Pool Pouch
4 clear plastic support rods
1 product set up guide
Should you have any problems or questions concerning your
product you should contact Water Tech’s Customer Service
Division toll free in the U.S. at
Hanging Your Pool Pouch
The Pool Pouch has been designed with special hooks that
will allow it to be hung from a variety of different structures.
If hanging the Pool Pouch from an above ground pool , the
clips can be attached to the inner lip of the molding encircling the top of the pool as depicted. This method can also
be used to attach the Pouch to chain link fencing or similar
structures. If hanging the pool pouch from the side of an
Intex pool or a structure where the attached straps can form
a loop, the clips can be easily attached to the nylon bands
located beneath the hanging strap as shown.
Folding Up Your Pool Pouch When Not In Use
1-800-298-8800 or via fax at 1-800-488-0700
or via the web at www.WaterTechCorp.com
To fold the Pool Pouch simply twist into a figure eight, grab wired ring and tuck into each
other until Pool Pouch is round. Insert back into polybag.
IMPORTANT:Remove 4 clear support rods before folding Pool Blaster.
Maintenance
TURN OVER FOR INSTRUCTIONS
Your Pool Pouch can be easily maintained during use by rinsing with fresh water. If
needed, the Pouch can be washed using soap and water. The Pool Pouch should
be brought inside when the pool is not in use, especially during the inclement winter
months.
WARNING:To reduce the risk of injury or damage to your Pool Pouch please adhere to the following warnings:
The Pool Pouch is NOT a toy and should not be played with or in. The hanging mechanisms cannot support the weight
of a child and attempting to play in the pouch will result in damage to the unit and may result in injury. If the outer
metal support ring protrudes from the fabric of the pouch, discontinue use IMMEDIATELY as serious eye injury can occur.
Keep the Pool Pouch AWAY FROM OPEN FLAMES at all times. Failure to do so may result in damage to the pouch or
injury. The Pool Pouch is not intended for use inside of pools.
CONGRATULATIONS on your purchase of the Pool Pouch, the quick and easy way to keep
all of your pool accessories in one place! As with all Water Tech products, the Pool Pouch has been
tested using our exacting quality control standards to ensure that you have received the highest quality product available.
Setting Up Your Pool Pouch
To set up your Pool Pouch, follow these easy steps:
Step 1.
Remove the Pool Pouch from the packaging and unfold the Pool Pouch allowing it to
expand to its full size.
POOL BLASTER
POOL
POUCH
Swim Accessory Organizer
TM
Step 2.
Insert the included support tubes into the sleeves located in the four corners of the Pool
Pouch. Two tubes in the top and two tubes in the bottom.
Hanging Your Pool Pouch
The Pool Pouch has been designed with special hooks that
will allow it to be hung from a variety of different structures.
If hanging the Pool Pouch from an above ground pool , the
clips can be attached to the inner lip of the molding encircling the top of the pool as depicted. This method can also
be used to attach the Pouch to chain link fencing or similar
structures. If hanging the pool pouch from the side of an
Intex pool or a structure where the attached straps can form
a loop, the clips can be easily attached to the nylon bands
located beneath the hanging strap as shown.
Folding Up Your Pool Pouch When Not In Use
To fold the Pool Pouch simply twist into a figure eight, grab wired ring and tuck into each
other until Pool Pouch is round. Insert back into polybag.
IMPORTANT:Remove 4 clear support rods before folding Pool Blaster.
Maintenance
Your Pool Pouch can be easily maintained during use by rinsing with fresh water. If
needed, the Pouch can be washed using soap and water. The Pool Pouch should
be brought inside when the pool is not in use, especially during the inclement winter
months.
WARNING:To reduce the risk of injury or damage to your Pool Pouch please adhere to the following warnings:
The Pool Pouch is NOT a toy and should not be played with or in. The hanging mechanisms cannot support the weight
of a child and attempting to play in the pouch will result in damage to the unit and may result in injury. If the outer
metal support ring protrudes from the fabric of the pouch, discontinue use IMMEDIATELY as serious eye injury can occur.
Keep the Pool Pouch AWAY FROM OPEN FLAMES at all times. Failure to do so may result in damage to the pouch or
injury. The Pool Pouch is not intended for use inside of pools.
Product Set Up Guide
Enclosed in the packaging of your Pool Pouch includes:
1 Pool Pouch
4 clear plastic support rods
1 product set up guide
Should you have any problems or questions concerning your
product you should contact Water Tech’s Customer Service
Division toll free in the U.S. at
1-800-298-8800 or via fax at 1-800-488-0700
or via the web at www.WaterTechCorp.com
TURN OVER FOR INSTRUCTIONS