ANNEX 1 - BoQ for constructing a 13-Classroom School with School Supplies
Description
Unit
Quantity Unit Price $ TOTAL $
(1) Construction of a 13-Classroom School
Site Preparation: Provide materials & machines for grading, levelling &
removing top soil not less than 15 cm, install bench marks and control
points in two directions at the site. The work includes cutting for any
1 depth required by location and lifting all debris outside the site
boundaries with all requirements of work, layering sub-base materials in
layers each layer should not exceed 20cm with good compaction 90% at
least according to specifications and instructions of site engineer.
M
2
2,500
0
Concrete works: Provide materials & casting the floor by ordinary
concrete class (c) 1:2:4,15cm thickness, a layer of BRC size 20x20cm
with 6 mm diameter, using white nylon under concrete, making concrete
2 joints 3x3mx5cm depth with the upper surface smoothened with all
necessary works taking into consideration reasonable slope for water
according to specifications and instructions of site engineer.
M2
2,000
0
Concrete works: Provide materials and labours for casting the
foundations of the retaining wall in case of having inclined land by
ordinary concrete class (c) 1:2:4, 25 cm thickness, using white nylon
3 under concrete, the work includes excavation works 80 cm width, 60 cm
depth at least with all necessary works and according to specifications
and instructions of site engineer.
M3
100
0
Masonary works: Provide materials and labours to build a retaining
wall in case of having inclined land using solid concrete blocks of
15*20*40 cm with cement mortar 1:3 at least 40 cm width or may be 60
4 to 80 cm width to the required height according to the natature of the
land with all work requirements including cement plastering and
emulsion paint and according to specifications and instructions of site
engineer.
M
3
100
0
Fence: Provide materials, grading, levelling & erecting TURKISH steel
fence from square pipe 3 inches or 7 cm diameter , 2mm thick, 3m
5 C/C,1.8m height from ground level, 4mm diameter with all necessary
works according to specifications and instructions of site engineer.
ML
200
0
Gates: Providing materials & erecting main gate (4x1.8 m), from steel
square pipe 2.5", 2.5mm thick, two cross section from pipe 2" for
strength the door, BRC 5x5cm, 3mm dia., steel Column 10x10cm, 2m
6 height, with conc. Foundation 60x60x80cm, movable jamb from pipe 3",
3mm thickness, 6m length for main gate with all accessories and with all
necessary works according to specifications and instructions of site
engineer.
No.
1
0
No.
1
0
M2
530
0
Gates: Providing materials & erecting main gate (2x1.8m) from steel
square pipe 2.5", 2.5mm thick, two cross section from pipe 2" for
strength the door, BRC 5x5cm, 3mm dia., steel Column 10x10cm, 2m
7
height, with conc. Foundation 60x60x80cm with all accessories and with
all necessary works according to specifications and instructions of site
engineer.
Shade: Supply materials and labours of construction shade Area using
best type corrougated sheet with reasonable thick having 4 m in front of
classrooms, 0.5 m behind, the work includes painting the frame of steel
8 structure by anti rust & oil paint two layers lead colour & the last layer to
be after completion with all work requirements according to
specifications and instructions of site engineer.
Page 1 of 7
Description
Unit
Quantity Unit Price $ TOTAL $
ClassroomsSupply materials and installing the cabinet from
sandwich panel 10 cm thickness for classroom fixed on the steel iron
base on the ground with inner dimension (7x5x3m) sloped roof (4cm
slope for 1 m lenght), using steel square pipes of 10*10 cm 3 mm thick
for the vertical four corners and for the horizontal ties both top and
bottom 4 pipes bottom + 4 pipes top to be fixed with the four corners
and three steel square pipes of 8*4 cm 2mm thick at the long direction
and two steel square pipes of 8*4 cm 2mm thick at short direction for
strengthening the top structure and fixing falseceiling , making a gutter
9
from galvanized plate with thickness (1.5)mm and width 40 cm ,
inaddition to electrical work (lighting and powering) at least 4 led 40 watt
(60*60) cm best type(turkish made pelsan ), 2 celling fan (60*60 ) best
type( syrian made ) ,one D.B. four circuit Seimins type,two 13amp
socket best available type for each room,,with external untirain lump
best type controlled by photocell in the main board nstalling enough
number of electric out lets(sockets)for computer rooms, installing
enough number of electric out lets(sockets)for computer rooms,
according to instructions of site engineer.
No.
13
0
No.
2
0
No.
1
0
No.
1
0
M2
630
0
Administration room: Supply materials and installing the cabinet by
sandwich panel 10 cm thickness fixed on the steel iron base with inner
dimension (7*5x3m)sloped roof (4cm slope for 1 m lenght) , using steel square
pipes of 10*10 cm 3 mm thick for the vertical four corners and for the
horizontal ties both top and bottom 4 pipes bottom + 4 pipes top to be fixed
with the four corners and three steel square pipes of 8*4 cm 2mm thick at the
long direction and two steel square pipes of 8*4 cm 2mm thick at short
10 direction for strengthening the top structure and fixing falseceiling ,a partition
wall by sandwitch panel 5 or 10 cm thick inside one of the cabinet , as well as
electrical work (lighting and powering) at least 4 led 40 watt (60*60) cm best
type(turkish made pelsan ), 2 celling fan (60*60 ) best type( syrian made ) one
D.B. four circuit Seimins type,two 13amp socket best available type for each
room,with external untirain lump best type controlled by photocell in the main
board,according to instructions of site engineer.
Guard room and Canteen: Supply materials and installing the
cabinet with a partition for guard and shop/canteen by sandwich panel
10 cm thickness fixed on the steel iron base with dimension (4.2x5x3m)
sloped roof (4cm slope for 1 m lenght) using steel square pipes of 10*10
cm 3 mm thick for the vertical four corners and for the horizontal ties
both top and bottom 4 pipes bottom + 4 pipes top to be fixed with the
11 four corners and two steel square pipes of 8*4 cm 2 mm thick for
strengthening the top structure, including all required accesories, water
and sewage works with all work requirements ,at least 2 led 40 watt
(60*60) cm best type(turkish made pelsan ), 1 celling fan (60*60 ) best
type( syrian made ) the work includes making a gutter from galvanized
plate with thickness (1.5)mm and width 40 cm and according to
specifications and instructions of site engineer.
Store: Supply materials and installing the cabinet for store by
sandwich panel 10 cm thickness fixed on the steel iron base with
dimension (3.6x5x3m) sloped roof (4cm slope for 1 m lenght) using
steel square pipes of 10*10 cm 3 mm thick for the vertical four corners
and for the horizontal ties both top and bottom 4 pipes bottom + 4 pipes
top to be fixed with the four corners and two steel square pipes of 8*4
12 cm 2 mm thick for strengthening the top structure, including all required
accesories, with electrical works and all work requirements(lighting and
powering) at least( 6) flourcent 40 watt lighting one D.B. four circuit
Seimins type,two 13amp socket best available type for each room,with
external untirain lump best type controlled by photocell in the main
board ,the work includes making a gutter from galvanized plate with
thickness (1.5)mm and width 40 cm,according to specifications and
instructions of site engineer.
Floor Tile: paving with porcelin tile turkish type and cement mortar
1:3 for the beneath of cabinet according to the drawing with all
13
requirements of the work ,according to specifications and instructions
of site engineer.
Page 2 of 7
Description
Unit
Quantity Unit Price $ TOTAL $
WC for students: Supply materials and installing the cabinet
by sandwich panel 10 cm thickness for latrines fixed on the
steel iron base with inner dimension (5.5x3x3m) sloped roof
(4cm slope for 1 m lenght) using steel square pipes of 10*10
cm 3 mm thick for the vertical four corners and for the
horizontal ties both top and bottom 4 pipes bottom + 4 pipes
top to be fixed with the four corners and three steel square
pipes of 8*4 cm 2 mm thick for strengthening the top structure
with fixing doors (2 main doors1*2.1 m) Aluminum best type
14 available in market with fixing partitions and divide to 5
No.
latrines (5 eastern) toilets best turkish type available in market
(5 doors 0.8*2 m, 5 ventilation, 5 windows of 0.6 *0.6 m) and
exhaust fan and electrical work (lighting and powering) ,
installing 5 wash basin with mixers best turkish type . the work
includes installing the connecting units with the water source
and also connect the unit with septic tank according to
specifications and instructions of site engineer..the work
includes making a gutter from galvanized plate with thickness
(1.5)mm and width 40 cm and instaling mirror and base of
soap
2
0
No.
2
0
No.
2
0
No.
2
0
WC for disabled children: Supply materials and installing the cabinet
for handicaps by sandwich panel 10 cm thickness for latrines fixed on
the steel iron base with inner dimension (2.3x1.7x3m) sloped roof (4cm
slope for 1 m lenght) using steel square pipes of 10*10 cm 3 mm thick
for the vertical four corners and for the horizontal ties both top and
bottom 4 pipes bottom + 4 pipes top to be fixed with the four corners
and one steel square pipes of 8*4 cm 2 mm thick for strengthening the
top structure with fixing 1 door aluminum (1.2 *2.1 m) and a window
0.8*0.8 m aluminum best type available in market , ventilation and
15 exhaust fan and electrical work (lighting and powering), installing 1
western tiolet and one wash basin with mixer best turkish type internal
in addition to provide and install Aluminum support inside the toilet and
make a concrete ramp to facilitate the handicap to enter the toilet in
front of the door, the work includes installing the connecting units with
the water source and also connect the unit with septic tank , according
to specifications and instructions of site engineer.the work imcludes
making a gutter from galvanized plate with thickness (1.5)mm and width
40 cm and instaling mirror and base of soap
WC for teachers: Supply materials and installing the cabinet for
teachers (Male/Female) by sandwich panel 10 cm thickness for latrines
fixed on the steel iron base with inner dimension (3.0x1.0x3m) sloped
roof (4cm slope for 1 m lenght) , using steel square pipes of 10*10 cm
3 mm thick for the vertical four corners and for the horizontal ties both
top and bottom 4 pipes bottom + 4 pipes top to be fixed with the four
corners and one steel square pipe of 8*4 cm 2 mm thick for
strengthening the top structureprovide and install two eastren tiolets
16
best turkish type with partition and fixing 2 doors 0.8*2.1 m, 2 windows
0.6*0.6 m, 2 ventilation) and exhaust fan and electrical work (lighting
and powering), installing 1 wash basin with mixer best turkish type
internal, the work includes installing the connecting units with the water
source and also connect the unit with septic tank, according to
specifications and instructions of site engineer . making a gutter from
galvanized plate with thickness (1.5)mm and width 40 cm andinstaling
mirror and base of soap
septic tank: Provision of materials & constructing septic tank with
3x3x3m internal dimension with internal wall division 20 cm thick 2.4 m
height, including excavation, plain concrete (20cm) 1:2:4 for foundation,
building walls by solid concrete blocks 15x20x40cm thickness 40cm,
casting the slab by reinforced concrete 15cm thickness, steel bar
17 diameter 12mm,15cm c/c in both direction for double net of
reinforcement, cement plastering by cement mortar 1:3 for the inner and
outer sides, painting by water proof paint in 2 layers at least and
ventilation PVC Pipe 4" to be fixed with the nearest wall and 2 iron cover
50x50cm with all requirements of work and according to specifications
and instructions of site engineer.
Page 3 of 7
Description
Cesspool: Provide materials & erecting cesspool 120 cm inner
diameter for black water , 8 m depth clear dimension. the work includes
excavation and drilling the cesspool 1.2 m diameter , put cylinder
reinforceing concrete pipes 90 cm clear diameter with at least 4 holes in
concrete cylinder sides ,12cm thick, concrete pipes Joints to be filled
18 with cement mortar 1:3 , casting the roof by reinforced concrete 15 cm
thick. Steel bars 12 mm @ 15 cm c/c ,other work required , heavy duty
cast iron/GPR type manholes cover 15x15 cm.
The Price includes provide crushed stone, gravel to the base of
concrete pipes (15 cm) thickness with surrounding areas, with all
requirements of work and according to specifications and instructions of
site engineer.
Water Tanks base: Provide materials & labours for construction the
base of tanks. the work includes excavation the foundation 3.4*3.4m,
60cm depth at least , reinforced concrete 1:2:4 for foundation 40cm
depth over a layer of thick nylon or crushed stone or lean concrete ,
steel bar 16mm thickness, 20cm c/c double net, building the base wall
by solid concrete block (15*20*40)cm, 40cm width of wall, 5m height,
5.6m length of wall in cross section, plastering work by using cement
mortar (1:3), painting by emulsion Turkish type, supply and installation
galvanized steel tank circular capacity of 21m3. the plate thickness of
19 6mm for the base and cylinder and the plate thickness of6mm for the
roof with good welding so as to prevent leakage of water and the work
includes painting by epoxy inside and oil paint outside the steel water
tank, the work includes installaing water pump and all fittings, galvanizd
pipes 1" inlet, 2.5 " outlet, washing 3", airflow to tank and source, valve,
tap, other fittings and accessories with connecting 3 galvanized steel
tank (1.5m3 each gauge 16).note;using galvanized pipes for external
and covering pipes by the special materal for protectig the hot and cold
according to specifications and instructions of site engineer.
Unit
Quantity Unit Price $ TOTAL $
No
2
0
L.S
1
0
Ground tanks: Supply and install galvanized steel tank with capacity
(1.5 m3 gauge 16) and install of iron base the work includes painting
the base by anti rust paint and two layers of oil paint ,note;using
20 galvanized pipes for exrwenal and covering pipes by the special materal
for protectig the hot and cold ,according to specifications and
instructions of site engineer.
No
3
0
Ground tanks: Supply and install stainless steel tank with capacity (1
m3 ,0.6mm thickness) with supply and install of iron base the work
includes painting the base by anti rust paint and two layers of oil paint
21 ,note;using galvanized pipes for exrwenal and covering pipes by the
special materal for protectig the hot and cold ,according to specifications
and instructions of site engineer.
No.
3
0
Connection the building with the main source of water using galvanized
pipes (3/4)” dia. The price includes excavation of trench (30x70 cm.),
covering pipes by (10) cm clean sand, back filling with all fitting and
22 necessary works.. With painting by anti-rustpaint. The price also
includes repairing asphalt or concrete pavement by 10cm concrete if the
pipe cross these type of pavements.
ML
100
0
M2
420
0
ML
150
0
Garden: Provide and put best type of loam and garden, the price
23
includes lining and dividing the garden to different lines and other
garden requirements making walls and other divisions and planting
grass acccording to specifications and instructions of site Engineer.
Hand rail: Metal hand rail works for the internal garden: Provide
materials & install hand rail for the internal darden. The price includes
24 primer and two layers of best oil paint for all iron mongery, and all other
required works according to the drawings and instructions of site
engineer.
Sink basin: Provide and install Sink basin turkish marble type( two
wings and two bowels), the price includes all accessories of pipes for
25 cold and hot water with the chrome mixer tap(Turkish type) and also
includes the Aluminum counter for the Sink base. The works should be
done according to specification, the drawings and instructions of the site
engineer.
Title board: Providing materials and fixing school title board using
steel sheet 1.25 thick, and (1x2)m with angle iron frame (1"x1"). The
26 price includes bracing, painting the board with one layer primer, three
layer best oil paint, and writing using best oil paint.the price include
instaling kurdistan flag by using a galvanize pipe 2 inch and 2m hight.
27
Title board for classrooms: plastictype with dimension (15*30)
cm fixed by screw and fisha to the wall.
Page 4 of 7
ML
4.5
0
No.
1
0
No.
25
0
Description
Unit
Quantity Unit Price $ TOTAL $
Gypsum false ceiling (60*60)cm: Provide materials and fixing gypsum
false ceiling for the Administration part , Classrooms and the places that indicate by
the site engineer. The price includes fixing galvanized steel rod 3mm dia (38mm28 beams) every 120cm for short directions and 60cm for long direction, and all
necessary works. The work should be done according to the specifications and
instructions of site engineer.
m2
600
0
LS
1
0
ML
100
0
Provide & install main distribution board formed from including labour
cost and fabricating a suitable PVC room with all work requirements and
29 accessories like door lock and other accessories
Main switch board size (120*100*25)cm with base 20cm. with two doors
which made form plate 2mm2 using thermal paints.
main circuit breaker (250 )A, three phaseMG or Schnieder type …no(1)
circuit breaker (125 )A ,three phase MG or Schnieder type …no(2)
bus bar (250) A, .. No (5) R,S,T,N + E,with shrin cable tube.
Digital multimeter Turkish made, the price includes all nessecery requirments .
a
kwh Polony type 200/5A with CT 200/5 with all nessecery requireds with
directed electrical disribution agreement.
An Automatic change over 250A by using two contactores schneider type with
protective systems .the price include all requirements
Install and test photocell by using contactor 60 amp schnider type with manual
auto selector switch
3x90+70mm2 cable,jordanian best available type.by using suitable cable try.
Page 5 of 7
Description
Unit
4x35mm2+1*35mm2 cable, jordanian best available type..by using suitable
b
cable try
c 5x4mm2 cable, jordanian best available type..by using suitable cable try
(4x10+10)mm2 cable, jordanian best available type.For computer
d rooms.D.B.(6) circuit Seimins type.by using suitable cable try.
Quantity Unit Price $ TOTAL $
ML
120
0
ML
600
0
ML
100
0
e 25)A with main circuit breaker 125amp.The work done by instruction of
NO.
2
0
f Install and test electrical bells best available type.
NO.
2
0
NO.
6
0
NO.
1
0
NO.
1
0
NO.
1
0
NO.
3
0
NO.
2
0
NO.
6
0
supply install, test insulated copper cable 1*95mm2 double pvc cover
f the price include cable shoes.
ML
24
0
supply materials and doing Earthing system protection by copper rod
g 1.5m with diameter 18mm the price includes copper bar conducter
1*50mm2 and all accessories to complet this Item.
NO.
3
0
supply,install, test ACSR conducter 120mm2 the price includes
h insulators and connectors.
ML
600
0
Supply materials, install and test circuit breaker 24 line Legrand type (16supervisor engineer.
Supply install and connect the Light projector (250 Watt) the work
g includes,photocell excavating the cable path with depth 50cm in PVC pipes
with cable 4x4mm2.
Supply materials and install available earth system for the building according
to the specifications with all necessary work in earth pure copper rode(1.5 m
h
2
)length, 3 no. and wires 1*50mm with excavation (depth 1m), backfilling,
adding salt and coal and connected with main board by wire 50mm2.
30
a
b
c
d
e
1
2
3
4
Installing Transformer 100 Kva(all works should be done according to
specifications and approved by electrical supervisor enginner
supply install and test Electric transformer100kva (outdoor type )
acoording to IEC 76 Iranian made(Iran transfo) the price includs
transfering.test cetification card. From Electric distribution directory of
Erbil and (I) shape Iron channels
supply, install and test electric board( 60*80*25) cm by iron plate
thickness,2mm with door and painting which contains bus bars
250Amp circuit breaker 250 A frence type 3pole, Voltmeter /Amper
meter scales and all accessories according to supervisor angineer
supply, install 11m high voltag electric pole lattice turkish made gv the
price includes excavation , concrete work, pin insulaters and all
accessories.
supply and install high tension electric pole 11m GV turkish made
tubuler type the price includes iron angle channels Linke fuse 12Kva,
lightning arrestor 11kv 10ka excavation concrete work with all
accessories.
supply, install 11m high voltag electric pole tubuler turkish made gv the
price includes excavation , concrete work, pin insulaters and all
accessories.
TOTAL (1)
(2) School Supplies
fixing Aluminum door (1*2.1 m) and necesssary accssories like door
lock,......etc according to instructions of site engineer.
fixing Aluminm with horizantal movement windows(1.1*1 m) Turkish
Aluminum best type available in market with double glasses and
Aluminum wire mesh 2 mm for the windows openings includingand all
work requirements
with iron
protectiontype,
for the
computer
fixing
one ventilationand
andnecesssary
exhaust fan(10)"
Panasonic
according
to
instructions of site engineer.
providing and instaling A/C units (1.5 ton each) best available type with
switable iron base, according to instructions of site engineer.
providing and instaling A/C units (2.0 ton each) best available type with
5 switable iron base, according to instructions of site engineer.
Supply, delivery and assembly of student desks with two seats
6 according to instructions of site engineer.
Supply, delivery and assembly of whiteboards according to instructions
7 of site engineer.
Page 6 of 7
NO.
0
No.
20
0
No.
64
0
No.
19
0
No.
31
0
No.
1
0
No.
216
0
No.
14
0
Description
Supply, delivery and assembly of fixed chairs according to instructions
8 of site engineer.
Supply, delivery and assembly of steel cabinets with 6 shelves
9 according to instructions of site engineer.
Supply, delivery and assembly of metal filing cabinet with two doors,
10 H1800*W900*D420mm Model Number: GLT-10-070 or equivelent and
according to instructions of site engineer.
Supply and install of water cooler UGUR type with two taps (Turkish)
11 and connecting with water source and electric,the door must be locked,
also connect the waste water with sewage system.
Supply and install LENOVA Laptop (E531-i3-2G-500G-15.6 DOS) with
12 NB cooling Pad & NB Key Multi-Lock , according to instructions of site
engineer.
supply office wooden table(180cm length ) and movable hydraulic chair
13 for management room (Malisian made best type first class) according
to Instruction of site engineer.
Table for teachers of a best quality having L= 140 cm , according to
14
Instruction of site engineer.
supply computer lab with computer desks made from MDF (L=150cm,
15 W=50cm, H=70cm) for 3 student design by Erbil Mohafaza
supply computer lab with computer chair metal, aluminium,
16 W60*D52*H101cm, model number: M0674-A031 or equivalent and
according to instructions of site engineer.
Supply and install InFocus IN112 Portable DLP Projector, 3D ready,
17 SVGA, 2700 Lumens or equivalent and according to instructions of site
engineer.
Supply and install Canon imageCLASS MF4370DN Multifunction Laser
Printer (3 in 1) or equivalent and according to instructions of site
18
engineer.
Supplying materials, installing and fixing all required and necessary
facilities for the basketball and volleyball yard (base, meshes, networks
19
……etc.) stadium plotting for both vollyball and basketball games
,according to instructions of site engineer.
TOTAL (2)
Unit
Quantity Unit Price $ TOTAL $
No.
15
0
No.
4
0
No.
2
0
No.
4
0
No.
31
0
Unit
1
0
NO.
3
0
NO.
10
0
NO.
31
0
NO.
13
0
NO.
1
0
LS
1
0
0
$0
GRAND TOTAL (1)+(2)
Page 7 of 7