RM 8310
Interroll Roller Conveyor
Straight
24 V powered
Dimensions
D.O.T.
ML
ZL
P
TW
115
120
TW
HSG
LW
LW
40
BF
Product Description
The 24 V roller conveyor enables zero pressure accumulation transport of unit loads with the help of a controller. Each zone is powered by a RollerDrive that is connected to a fixed number of idlers via PolyVee belts.
Technical data
General technical data
Max. load capacity*
Conveyor speed*
Incline/decline
Ambient temperature
Roller type
Roller diameter
Roller material
Number of rollers max. per zone
Rated voltage
Motor type
Drive medium
Torque transmission
Control
Roller
Drive
50 kg/Zone (110 lbs/zone)
0,1 to 1,0 m/s (at 35 kg)
0,1 to 0,8 m/s (at 50 kg)
20 to 197 ft/m (at 77 lbs)
20 to 157 ft/m (at 110 lbs)
Max. 4°
+5 to +40 °C (40 to 105 °F)
Interroll Series 3500
50 mm (1.9”)
Steel 1.5 mm, zinc-plated
20
24 V
Interroll RollerDrive EC310
PolyVee belts
Roller-to-Roller
MultiControl
BF
Between frames
LW
ML
ZL
TW
P
HSG
Lane width
Module length
Zone length
Module width
Roller pitch
Height side guide
420, 620, 840 mm (16.5”, 24.4”, 33” nom.)
others on request
BF +120 / -90 mm (+4.72” / -3.54”) per side with flexible side guide
ZL x number of zones, max. 4080 mm (160.6”)
Number of rollers x P
BF + 80 mm (3.15”)
60 / 90 / 120 / 150 mm (2.36” / 3.54” / 4.72” / 5.90” nom.)
35 - 65 mm (1.38” - 2.56”)
Scope of supply
· Module is completely assembled and prewired
· Supply incl. 1 sensor per conveyor/zone
· Please order support stands and end caps separately
· Supply incl. bus (communication) cable
* The combination of maximum values is not always possible.
22
© 2017 INTERROLL
© 2017 INTERROLL
23