SINGLE-PURPOSE HYDRAULIC PRESS
Device is used for pipes dividing by means of two working tools,
which are placed onto horizontal and vertical working cylinder.
TARPO C-40+40 has a horizontal and vertical pressing cylinders.
Power output of hydraulic unit is increased by about 50% compared to
previous hydraulic press C-40.
TARPO C-40+40 has these advantages:
•
•
•
•
•
•
•
•
massive cast-iron construction
simple controlling and handling
horizontal and vertical working cylinder
adjustable pressing force
piston forehead is designed for various tools fastening
high operational reliability = extended warranty period
PLC Siemens C7-613 control system
wide range of accessories
This press is used for various small manufacturing and assembly works - like pressing, straightening,
bending, trimming, pulling, protracting, riveting, coining etc.
All our machines have been designed and produced according to the current harmonized standards, their
origin is declared via Declaration of conformity and provided with the CE symbol.
10 years warranty for mechanical parts and 1 year warranty for hydraulics and electro components.
We provide the warranty and after-warranty service inspections.
Pressing force is adjustable - by specifying the parameter in control system.
Press can be switched into a faster mode (with half power), but the ram velocity exceed to 130 mm/s.
The press is easy to operate - all operator´s activity is monitored with control system.
C-40+40 Single-purpose press has dimensions 750 x 640 mm and can be equipped with a few
rows of threaded holes M8 for clamping of preparations and auxiliary devices.
PROVEN SICK C4000 LIGHT CURTAIN - FOR SAFETY WORKING WITH PRESS.
Pressing tool with blowing
Press with safety light curtains
TARPO C-40+40 TECHNICAL PARAMETERS
PRESS
Max. pressing force
kN
40 -in horizontal and vertical direction
Max. backward force
kN
8
Downforce velocity
mm/s
60
Backforce velocity
DIMENSIONS
Ram stroke
mm/s
140
mm
200 (vertically), 60 (horizontally)
Press opening
mm
300
Press unloading
mm
200
Table height
mm
1000
Press length
mm
790
Press width
mm
640
Press height
mm
1750
kg
350
Mpa
20
Press weight
HYDRAULICS
Max. pressure
Working fluid
OH-HM46
Filling
ELECTRO
Electric motor
Average consumption
l
30
kW/ot.
kW/h
3 / 1420
1,8
Detecting the pipe in position
(2x position sensor)
TARPO C-40+40 side barriers and CS
Ltd. Prazska 346, 270 01 Knezeves, Czech Republic
Mobil: +420 774 416 003, E-mail: [email protected], www.tarpo.cz