V i s h ay I n t e rt e c h n o l o g y, I n c .
Capacitors - ESTAprop/ESTAdry, Low Voltage
I
INNOVAT
AND TEC
O L OGY
PhMKP and PhMKPg
N
HN
VISHAY ESTA POWER CAPACITORS
O
19
62-2012
ESTAprop/ESTAdry
Low Voltage Power Capacitors
Key Benefits
•
•
•
•
Compact design to fit 300-mm cubicle modules
Very low losses, and small diameters for excellent heat dissipation
Stacked assembled winding elements reduce the risk of device breakdown
Highest overcurrent capability of up to 3 times rated current; and inrush current
capability of 300 times rated current
• Life expectancy of > 150,000 operating hours
• Highest outputs of up to 37 kvar
• Two versions available: oil-flled and dry, gas-flled
APPLICATIONS
• Recommended for power factor correction and filters in low-voltage
applications ≤ 1000 Vrms
Resources
• Datasheet: PhMKP and PhMKPg - http://www.vishay.com/doc?13004
• For technical questions contact [email protected]
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT9025-1201
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V i s h ay I n t e rt e c h n o l o g y, I n c .
I
INNOVAT
PhMKP..., PhMKPg..., Cylindrical, LVAC
PhMKP..., PhMKPg..., Cylindrical, LVAC
PhMKP..., PhMKPg..., Cylindrical,
VishayLVAC
ESTA
www.vishay.com
www.vishay.com
Vishay
www.vishay.com
Vishay
CAPACITORS IN CYLINDRICAL CASING
CAPACITORS IN CYLINDRICAL CASING
TECHNICAL DATA
CAPACITORS
IN CYLINDRICAL CASING
TECHNICAL DATA
IEC 60831-1 + 2, EN 60831- 1 + 2, UL810 LATEST EDITIONS,
STANDARDS
TECHNICAL
Capacitors
in DATA
Cylindrical Casing – Technical
Data- FILE E97723
UL/ULC
19
62-2012
ESTA
ESTA
IEC 60831-1 + 2, EN 60831- 1 + 2, UL810 LATEST EDITIONS,
UL/ULC
E97723
IEC
+ 2,
EN
10 -%FILE
(up
to
8 h 60831daily) 1 + 2, UL810 LATEST EDITIONS,
Ucn +60831-1
UL/ULC
E97723
+ 10
15 -%
%FILE
(up to
to
30hmin
daily)
Ucn
cn +
(up
8
daily)
U
+
20
%
(up
to
5
min,
only
U
cn
+ 10
15 %
% (up
(up to
to 8
30hmin
daily)200 times in the life of the capacitor)
Ucn
daily)
U
cn +
U
+ 20
30 %
% (up
(up to
to 5
1 min,
min,
only
200 times
times in
in the
the life
life of
of the
the capacitor)
capacitor)
cn +
U
only
+
15
%
(up
to
30
min
daily)200
Ucn
cn
Please
also
refer
to
“Terms
Definitions”.
Ucn
+ 30
200 times
in the life of the capacitor)
20 % (up to 1
5 min, only and
cn
Please
also
refer
to
“Terms
and
Definitions”.
U
30 % (up to 1 min, only 200 times in the life of the capacitor)
cn x+ In,
1.3
Please
refer
to “Terms and
Overcurrent
1.5
with 10
% overvoltages,
15Definitions”.
% over capacitance and harmonics included,
1.3 xx In
In,also
(in
accordance
with
the
above
standards)
continuous
Overcurrent
1.5 xx In
10 % overvoltages, 15 % over capacitance and harmonics included,
1.3
In,withoperation
Please
refer
to “Terms and
(in accordance with the above standards)
continuous
Overcurrent
1.5
x In also
withoperation
10
% overvoltages,
15Definitions”.
% over capacitance and harmonics included,
Please
refer
to “Termswith
and the
Definitions”.
(in accordance with the above standards)
continuous
operation
- 5 %/+ also
10 %
in accordance
standards
Tolerance on capacitance
also
to “Terms
and the
Definitions”.
± 55 %/+
% as
Vishay
ESTA
standard
-Please
10
%refer
in accordance
with
standards
Tolerance on capacitance
±
%x as
Vishay
ESTA standard
- 55 %/+
% in accordance
with the standards
Test voltage,
2.15
U10
cn, VAC , 2 s (routine test)
Tolerance
on terminal/terminal
capacitance
± 5 % as
standard
, 2VAC
,ESTA
2 s (routine
Test
terminal/terminal
2.15
UcnVishay
Test voltage,
voltage, terminal/casing
4800xVAC,
s (routine
test) test)
, 2 s (routine test)
Test
voltage,
terminal/terminal
2.15
xVAC,
Ucn, 2VAC
Test
voltage,
4800
s (routine
Inrush
currentterminal/casing
300 times
rated
currenttest)
In
Test
voltage,
terminal/casing
4800
VAC,
2
s
(routine
test)
Inrush current
300
times
ratedtocurrent
In
Losses

0.25
W/kvar
0.45 W/kvar
(without discharge resistors)
Inrush current
300
times
ratedtocurrent
In
Losses

0.25
W/kvar
0.45hW/kvar
(without discharge resistors)
>
150 000
operating
(ESTAprop)
Statistical life expectancy
Losses

0.25
W/kvar
to
0.45
W/kvar
(without discharge resistors)
> 150
130 000
000 operating
operating h
h (ESTAprop)
(ESTAdry)
>
Statistical life expectancy
> 130
000 operating
h (ESTAdry)
150clamp
(ESTAprop)
IP20
terminal
with
mounted
discharge resistor unit or IP00 (terminal cover
Statistical
life expectancy
Degree of protection
>
000 protection
operating
hclass
(ESTAdry)
for130
higher
upon request),
indoor
IP20
clamp
terminal with
mounted
discharge
resistor unit or IP00 (terminal cover
Degree of protection
for
higher
protection
classmounted
upon
request),
clamp
terminal
with
discharge
unit or IP00 (terminal cover
Ambientoftemperature
-IP20
25/D
(max.
55 °C) ESTAprop
, - 40/D
(max.indoor
55resistor
°C) ESTAdry
Degree
protection category
higher
protection
class upon
request),
Ambient
category
-for
25/D
(max.
55 °C) ESTAprop
- 40/D
(max.indoor
55 °C) ESTAdry
Permittedtemperature
casing temperature
Max.
65
°C (measured
on top,of
the can)
Ambient temperature
category
-Max.
25/D65
(max.
55 °C) ESTAprop
- 40/D
(max. 55 °C) ESTAdry
Permitted
°C
(measured
on top,of
the can)
Cooling casing temperature
Naturally
air-cooled
Permitted
casing temperature
Max. 65 °C
(measured on top of the can)
Cooling
Naturally
air-cooled
Permissible relative humidity
Maximum 95 %
Cooling
Naturally air-cooled
Permissible
relativealtitude
humidity
Maximum
95 %sea level
Maximum allowed
2000 m above
Permissible
relative
humidity
Maximum
95 %sea level
Maximum
allowed
altitude
2000 m and
above
Mounting position
Vertical
horizontal
Maximum
allowed
altitude
2000
m
above
sea level
Mounting
Vertical
and
horizontal
Mounting position
and grounding
Threaded
M12
stud at the bottom of the container
Mounting
position
Vertical
and
horizontal
Mounting
and grounding
Threaded overpressure
M12 stud at the
bottom
of the
container
Safety features
All-phase
tear-off
fuse,
self-healing
Mounting
and
grounding
Threaded
M12
stud at the
bottom
of the
container
Safety
All-phase
tear-off
fuse,
self-healing
Casingfeatures
Aluminumoverpressure
can
Safety
features
All-phase
overpressure
tear-off
fuse,
self-healing
Casing
Aluminum can film, self-healing
Dielectric
Polypropylene
Casing
Aluminum can film, self-healing
Dielectric
Polypropylene
Filling agent
Natural
oil, non-PCB, biodegradable (ESTAprop) or dry/gas - filled (ESTAdry)
Dielectric
Polypropylene
film, self-healing
Filling agent
Natural
oil, non-PCB,
biodegradable (ESTAprop) or dry/gas - filled (ESTAdry)
Ø 64 mm
Filling agent
Natural
oil,
non-PCB,
biodegradable
IP20
A (D-351), 3.0(ESTAprop)
Nm, max. or
16 dry/gas
mm2 - filled (ESTAdry)
Ø
64 M4
mmterminal block
drawing
IP20
Ø
64 M4
mm1terminal block A (D-351), 3.0 Nm, max. 16 mm2
max. M4
current,
depending
ambient
drawing
1terminal
IP20
block Aon
(D-351),
3.0conditions:
Nm, max. 16 mm2
34 A (1-phase)/25
A (3-phase)
max.
current,
depending
on ambient conditions:
drawing
1
34
A (1-phase)/25
A (3-phase)
max.
current, depending
on ambient conditions:
Ø 84
mm
34
A (1-phase)/25
A (3-phase)
IP00
M5
(D-203), 2.0 Nm, max. 25 mm2
Ø 84
mmscrew terminals
drawing
feed terminals
through (D-203), 2.0 Nm, max. 25 mm2
IP00
screw
Ø 84 M5
mm2,
max.
current,
depending
ambient
drawing
2,
feed
through on
IP00 M5
screw
terminals
(D-203),
2.0conditions:
Nm, max. 25 mm2
57 A (1-phase)/52
A (3-phase)
max.
current,
depending
on ambient conditions:
drawing
2, feed
through
57
A (1-phase)/52
A (3-phase)
max.
current,
depending
ambient
IP20
M4
terminal
block
Aon
(D-351),
3.0conditions:
Nm, max. 16 mm2
Terminals per casing Ø
57
A (1-phase)/52
A (3-phase)
drawing
(cross-head
IP20
M4 3terminal block
A (D-351), 3.0 Nm, max. 16 mm2
Terminals
perscrews)
casing Ø
max. M4
current,
depending
ambient
drawing
3terminal
(cross-head
IP20
block Aon
(D-351),
3.0conditions:
Nm, max. 16 mm2
Terminals perscrews)
casing Ø
57 A (1-phase)/52
A (3-phase)
max.
current,
depending
on ambient conditions:
drawing
3
(cross-head screws)
57
A (1-phase)/52
A (3-phase)
max.
current,
on ambient conditions:
Ø
116
mm depending
57
A (1-phase)/52
A (3-phase)
IP20
M5
terminal block
B (D-352), 3.0 Nm, max. 25 mm2
Ø
116
mm
drawing
4terminal block B (D-352), 3.0 Nm, max. 25 mm2
IP20
Ø 116M5
mm
2
max.
current,
depending
ambient
(3-phase)
drawing
4terminal
IP20 M5
block Bon
(D-352),
3.0conditions:
Nm, max. 60
25 Amm
QUICK REFERENCE DATA
max.
current,
depending on ambient conditions: 60 A (3-phase)
drawing
4
Ø
136
mm
Series
Phdepending
MKP…, cyon
lindambient
rical
PhMKPg…, cylindrical
max.
current,
(3-phase)
2
IP20
terminal
block B (D-352),
3.0conditions:
Nm, max. 60
25 Amm
Ø
136M5
mm
2
drawing
5terminal
Description
LVAC
Power
Capacitors
- Oil
- INDOOR,
IP2025 mm
LVAC
Power Capacitors - Dry - INDOOR, IP00 - IP20
IP20
M5
block
B (D-352),
3.0 IP00
Nm, -max.
Ø
136
mm
2
max. M5
current,
depending
ambient
(3-phase)
drawing
5terminal
IP20
block Bon
(D-352),
3.0conditions:
Nm, max. 60
25 Amm
Type
C5apacdepending
itors, fixed,on
low
voltageconditions: 60 A (3-phase) Capacitors, fixed, low voltage
max.
current,
ambient
drawing
current,
60 A (3-phase)MKP, metallized polypropylene film
Technolo
gy
KP, medepending
tallized polon
yprambient
opylene fconditions:
ilm
QUICK
REFERENCE
Data max. M
STANDARDS
STANDARDS
Overvoltages
(in accordance with the above standards)
Overvoltages
(in
accordance with the above standards)
Overvoltages
(in accordance with the above standards)
Voltage max. (V)
1000
1000
Revision: 09-Dec-11
Document Number: 13004
3
3-phase
D:
3
x
11.5,
3-phase
Y:
3
x
83.6,
1-phase:
49.7
3-phase
D:
3
x
11.5, 3-phase Y: 3 x 83.6
Capacitance min.For
(µF)technical
Revision: 09-Dec-11
Document
Number:
13004
3
questions, contact:
[email protected]
Revision: 09-Dec-11
Document Number: 13004
3 THE 3-phase
For
technical
questions,
contact:
[email protected]
THIS DOCUMENT IS SUBJECT
TO max.
CHANGE
WITHOUT
NOTICE.
PRODUCTS
HEREIN
AND THIS3-phase
DOCUMENT
3-phase
D: 3 x 335.0,
Y: 3 DESCRIBED
x 219.3,1-phase:
332.2
D: 3 x 335.0, 3-phase Y: 3 x 219.3
Capacitance
(µF)
ARE
SUBJECT
SPECIFIC
DISCLAIMERS,
SET
AT www.vishay.com/doc?91000
For technical
questions,
contact:
[email protected]
THIS DOCUMENT IS
SUBJECT
TOTO
CHANGE
WITHOUT
NOTICE.
THEFORTH
PRODUCTS
DESCRIBED HEREIN AND THIS DOCUMENT
OuSUBJECT
tput minTO
. (TO
kCHANGE
vaSPECIFIC
r)
2 AT www.vishay.com/doc?91000
2
ARE
DISCLAIMERS,
THIS DOCUMENT IS
SUBJECT
WITHOUT
NOTICE.SET
THEFORTH
PRODUCTS
DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Output max. (kvar)
37.1
37.1
Revision 09-Dec-11
Capacitors - ESTAprop/ESTAdry, Low Voltage
ESTAprop/ESTAdry
Low Voltage Power Capacitors
AND TEC
O L OGY
PhMKP and PhMKPg
N
HN
VISHAY ESTA POWER CAPACITORS
O
PRODUCT SHEET
2/2
VMN-PT9025-1201
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000