7WC 3X40 WH
Item Image
Hartland CFX White Push On/Off Dimmer 3 gang 2 way 400W max 40W min.
Standard Insert will be White.
Wiring
Primary Range
Insert Type
Plate Finish
Frame Finish
Switch Colour
Body & Switch Trim
Height
Width
Depth
Fixing Hole Centres
Minimum Wall Box Depth
Wattage
Switched Poles
Current Rating
Voltage
Max load
Contact Gap Minimum
Terminal Capacity 1
Terminal Capacity 2
Terminal Capacity 3
Terminal Capacity 4
Terminal Capacity 5
Earth Terminal Capacity 1
Earth Terminal Capacity 2
Earth Terminal Capacity 3
Earth Terminal Capacity 4
Earth Terminal Capacity 5
Product Class 1
Ambient Operating
Temperature
Recommended Location
Standard/Approval
Hartland CFX Colours
Leading Edge Resistive Dimmers
Bright White
Patents and Trademarks
CFX is a Registered Trade Mark No 239866.
All products listed conform to current British or
European standards and the product information is
correct at the time of going to press.
All accessories are manufactured under an
accredited BS EN ISO 9001 : 2008 Quality System.
Illustrations and diagrams are reproduced within
the limitations of reproductions and printing
processes are not binding.
Due to manufacturing processes we cannot
guarantee an exact colour match and shadings of
certain finishes.
(7WC3X40WH - Hartland CFX White Push On/Off Dimmer 3 gang 2 way 400W max 40W min. Standard Insert will be White.)
White
Double = 86mm
Double = 146mm
Double = 4.2mm
Box Fixing = 120.6mmBox Fixing = 120.6mm
35mm
400W per gang
Single
1.66 Amps per gang
220/250V AC
400W resistive per gang
n/a
2 x 1mm2
2 x 1.5mm2
5 x 1mm2
4 x 1.5mm2
3 x 2.5mm2
1 x 4mm2 Multi-Strand
1 x 6mm2
Face plate must be earthed
-5° to +40°C
Indoor use only
BS EN 60669-2-1
It is the policy of the company to continually
improve products as part of our development
programme.
Therefore, we reserve the right to alter designs
and dimensions without prior notice.
Correct as at August 2012
E&OE