MCE 103-COMPUTER AIDED TECHNICAL DRAWING I
(2 therical +2 practical) 3 Credits 2016-2017 Fall Course Syllabus
Instructor:
Assistant:
Assist. Prof. Dr. İhsan TOKTAŞ
e-mail: [email protected]
Office: AYBÜ Mühendislik ve Doğa
Bilimleri Fakültesi 150. Sk. Etlik Batı
Kampüsü Antares Yanı Keçiören –
A526
Office Telephone:
Eylül DEMİR
e-mail: [email protected]
Office: AYBÜ Mühendislik ve Doğa
Bilimleri Fakültesi 150. Sk. Etlik Batı
Kampüsü Antares Yanı Keçiören –
B107
OfficeTelephone:
Lecture Hours:
Section 1 –
Monday 09:30–11:20 @A422 (Gr.1),
Monday 11:30–13:20 @A422 (Gr.2),
Section 2 –
Thursday 09:30–11:20 @A303 (Gr.2),
Thursday 11:30–13:20 @A303 (Gr.1),
Office Hours:
Thursday 13:30-17.30.
Appointments are accepted.
Web site:
www.ybu.edu.tr/itoktas/
Course Description: Engineering drawing is the language
of the engineers and technicians. Therefore, it is the
intent of this course to equip students with the
fundamentals of this unique language and to give them
the skills necessary to prepare complete, concise, and
accurate communications through engineering drawings
using AutoCAD.
Course Objectives:

To give an ability to write and read technical
drawings.

To give an ability to draw standard machine
elements and assembly drawings, and to
provide the applications of dimensioning.

To provide with a foundation in computer
aided design.

To make aware of the capabilities and
limitations of computer design tools for
engineers.
Learning Outcomes and Competences: According to
recent international standards be learning and applying
drawing rules concerned with machine technical
drawing.
Students who pass the course will be able to:

Create freehand sketching and lettering.

Describe relations between drawing-design
and part-system.

Give dimensions on the drawings.

Sketch the orthographic views of the machine
parts.

Draw section views of the machine parts.

Give a critical view of a foundation in
computer aided design.

Sketch the 2-dimensional drawings in CAD.



Describe the role of the engineer in a CADCAM system.
Design some simple components and
assemblies.
Print out the 2-dimensional drawings.
In short, having successfully completed this Course, the
student will be able to write and read the language of
industry, “Engineering Drawing”
Course Material: Text Books are “AutoCAD, Mendi F.,
Taşkesen A., Toktaş İ., Eldem C., Gazi Co., Ankara, 2008.”
and “Information and Application Sheets, İhsan Toktaş
2011.”
Lecture notes are to be provided via the web site of the
course (possibly before the lecture hour) as pdf or dwg
files. These files will include PowerPoint slides presented
in the class. Study sets will be posted on course’s web
site at the beginning of each chapter. It is strictly
recommended that the students review the topics by
working on these study sets given for student’s benefit.
Examinations: There will be 2 mid-term examinations, 1
final examination, and 3 quizzes. The examinations and
the quizzes will be computer based and students are
asked to prepare a given drawing using AutoCAD. These
exams basically aim to evaluate the engineering drawing
knowledge of the student, not only the AutoCAD usage.
Quizzes will be scheduled before each examination.
Thus, the quizzes can be perceived as exercises covering
the topics so far.
Attendance: According to the university regulations,
students must attend at least 70 % of the lecture hours
and 80 % of the recitation/laboratory hours. Otherwise,
the student gets NA (Not attended) from the course.
Valid excuses are exempt from computation of these
percentages.
Apart from the university regulations, it is of student’s
benefit to attend all of the lecture and
recitation/laboratory hours. In fact, the students are
expected to attend all of the sessions throughout the
semester, since the sessions follow a series of
applications.
Grading: Overall final grade will be over 100 points.
Weight of each grading item will be as below.
Midterm Exam 20% 2 exams
Quiz 20% 3 exams
Homework 20% assignments on each week
Final Exam 40% 1 exams
93 – 100 AA
85 – 92 BA
71 – 84 BB
61 – 70 CB
51 – 60 CC
45 – 50 DC
40 – 44 DD
< 40 FF
All the announcements, including the examination dates
will be posted on the course web site.
Reference Books:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
AutoCAD , Mendi F., Taşkesen A., Toktaş İ., Eldem C., Gazi Kitapevi, Ankara, 2008.
Bilgi ve Uygulama Yaprakları, İhsan Toktaş 2016.
Engineering Design Graphics with AutoCAD 2007 (12th Edition), J.H. Earle, Pearson/Prentice Hall, New York,
2008, s. 708.
Engineering Drawing and Graphic Technology-International Edition, Thomas E. French, Charles J. Vierck, Robert
J. Foster, McGraw-Hill, Inc.1993.
Engineering Graphics, F.E.Giesecke, et.al., Pearson/Prentice Hall, New Jersey, 2004.
Makine Resmi, İ.Z. Şen, N.Özçilingir, DE-HA Yayın, İstanbul, 2007.
Mühendislik Çizimin Esasları, S.Kurt, İ.Gerdemeli, C.E.İmrak, Birsen Yayınevi, İstanbul, 2005.
Standard Makina Elemanları Çizelgeleri, Şen, İ.Z., ve Özçilingir, N., Deha Yayıncılık, İstanbul,2004.
Technical Drawing (13th Edition), Giesecke, E. Frederick, et. al., Prentice-Hall, Inc., Upper Saddle River, N.J., 2009.
Technical Graphics Communication, G.R.Bertoline, et.al., McGraw-Hill, Boston, 2003.
Teknik Resim, Bağcı, M., Cilt I, Cilt II, Birsen Yayınevi, İstanbul, 2003.
Teknik Resim, Temel Bilgiler, İ.Z.Şen, N.Özçilingir, DE-HA Yayın, İstanbul, 2007.
TS EN and ISO Standards, ICS 01.100.01; 01.100.20 and 01.110 category.
Course plan:
Week
week 1
Course Contents
Section 1 –
Technical Drawing Terms and Description
week 2
Technical Drawing Equipments, Using Drawing Tools,
Meanings of Line Types, Lettering, Papers-plates.
week 3
Geometric drawing; Tangent joining., Dividing of the line
and circle equal parts; polygon and spiral drawing., Curve
of Oval, ellipse, parabola, hiperbola e.t.c. drawing.
Point, Line, Plane.
week 4
week 5
week 6
Orthographic Projection
Projection of the 3rd principal view from other two
principal views
Orthographic writing
Pictorial sketching,
Orthographic Reading
week 7
Midterm exam #1
week 8
First and third projection methods, Described with single
side view parts and its technical drawings, Auxiliary
Views.
Orthographic ConventionSection views
Sectioning techniques, Types of section views
Section views, Convention in section
whole and half of section
Isometric Perspectives, Perspective Sketching
Principles of Dimensioning, Drawing and dimensioning of
rotated parts
week 9
week 10
week 11
week 12
week 13
Midterm exam #2
week 14
Working Drawing
Course Contents
Section 2 –
Introduction to AutoCAD
NEW, OPEN, SAVE, SAVE AS, QUIT, END,
AUTOCAD HELP, Coordinate Systems
Overview.
LIMITS, GRID, SNAP, ORTHO, COLOR,
LINETYPE, LTSCALE, UNITS, SELECT OBJECTS,
OSNAP , Polar Tracking, ZOOM, PAN, FILL
Drawing Commands
LINE, XLINE, CIRCLE, POLYGON, ELLIPSE,
Drawing simple geometric objects
Drawing Commands
SKETCH, ARC, PLINE, POINT, TRACE, SOLID,
DONUT, PEDIT, CHANGE
Drawing simple geometric objects
Modifying Commands
ERASE, TRIM, BREAK, SCALE, CHAMFER,
FILLET, COPY, ROTATE, MOVE, EXTENT,
Modifying Commands
OFFSET, MIRROR, EXPLODE, DIVIDE,
MEASURE, STRETCH, ARRAY
Geometrical Construction
Drawing simple geometric objects
Geometrical Construction
Drawing simple geometric objects
AutoCAD hatching techniques
HATCH, BHATCH, GRADIENT
TEXT Commands
Text Style, Single Line Text, Multline Text.
Isometric Drawing
Dimensioning commands
DIM AND ATTRIBUTE, Lines and Arrows, Text ,
Primary Units, Alternate Units, Tolerances.
Inquiry commands, (LIST, DBLIST, ID, AREA)
Blocks (Xref, image, OLE object)
Page setup, Plotting, Application of Design
and Drawings
BASIC TECHNICAL DRAWING EQUIPMENT
When drawing, sketching or attempting basic graphics work the equipment shown below is very useful and sometimes
essential.
ENGLISH
TURKISH
Plaid notebook for use in the course and sketch
(60pages),
One folder 60s for Information and Application Sheets,
H, HB, B and 2B Drawing Pencils;
Soft Pencil Eraser (with sharp edges),
Cellophane Tapes,
Pencil sharpeners,
o
o
Medium-sized 45 and 30-60 Set Squares (Hatas Co.),
Jointed compass both feet.
Coloured pencil sets (at least 6 colors),
A protractor,
Circle templates,
French Curves,
Derste kullanım ve kroki harita ve metot defteri (kareli 60
yapraklı).
Bilgi yaprakları ve uygulamalar için bir adet 60 lı klasör,
H, HB, B ve 2B kurşun kalemler,
Yumuşak leke yapmaz silgi (keskin kenarlı).
Saydam yapıştırma bandı,
Kalem açacağı,
o
o
45 ve 30-60 orta boy gönyeler,
Her iki ayağı mafsallı pergel,
Kuru boya seti (en az 6 renk),
Açı gönyesi,
Daire Şablonu,
Pistole takımı,
Drawing Pencils are a basic requirement of any graphics
course. You need a number ranging from 2B to 2H. These
letters refer to the hardness of the pencil lead. When
sketching a soft lead such as 2B can be used to produce quick
drawings and shading. On the other hand, when drawing
precisely a 2H or even a harder pencil such as a 4H is ideal.
This type of pencil keeps its sharp edge for longer and
produces very fine lines.
Cellophane Tapes
It is convenient for office, school and home applications. It
can be used in light packaging operations. Cellophane tapes
are transparent, do not cover the surface onto which it has
been adhered to and reflects the color. With its structure,
which can be torn by hand, it enables practical use and is
opened smoothly.
Pencil Eraser
All erasers are not created equal. You get different erasers for
different purposes. The two most common erasers are white
and pink. The pink erasers are harder and tend to not only
leave marks on the paper, but also damage the grain of the
paper. In drawing you would need to use a soft eraser
formulated for pencil drawing. These are always white in
colour, but you will still need to be careful as the cheaper
brands also tend to be too hard.
Pencil sharpeners are essential for sharpening pencils.
Accurate drawings cannot be produced unless they are sharp.
However, when shading a blunt pencil is sometimes useful.
A refillable pencil is very useful especially if you are
constructing a drawing that needs a constant thickness of line.
The refills are available in a range of thicknesses and either
hard or soft leads. Disadvantages are that the refillable pencils
are relatively expensive and so are the refills. Also, the leads
tend to break more easily.
Set Squares are used to draw accurate angles. The most
common are 45 and 60/30 degrees. When using set squares
they should always be used along with a T-Square. The Setsquare rests on the straight edge of the T-Square and this
ensures that when the angle is drawn it is accurate.
A protractor is used to measure angles. A typical protractor is
a semi-circular piece of plastic with 180 degrees printed
around its curve. This piece of equipment is not only used in
graphics for constructing accurate drawings but is also used in
subjects like Mathematics.
A ruler is possibly one of the most important pieces of
drawing equipment. Rulers should only to used to measure
distances with lines being drawn with T-Squares and Set
Squares. However, most people use rulers to draw straight
lines. But it must be remembered that the edge of a ruler is
not guaranteed to have a perfectly straight edge unlike a good
T- Square or Set Square.
Circle templates are very useful. They are plastic with a
number of accurate circles cut out. They are used to draw
circles of set diameters/sizes and are particularly useful if the
circle is small. Small circles are difficult to draw using a
traditional compass because the compass can easily slip on
the paper. With a template, the circle diameter is selected
and a sharp pencil is used to draw round the cutout circle.
Ellipse templates are similar to circle templates and these are
useful for drawing ellipse / oval shapes accurately.
A compass is an essential piece of equipment. It is well worth
buying a good set which includes at least two compasses
allowing the drawing of small and large circles. The drawing
opposite is a ‘bow’ compass, this is used for drawing small
circles very accurately. Cheap compasses tend to slip on the
paper quite easily. A good, quality compass set will last a life
time.
Compact Geometri Pergel
T-Squares are use to draw horizontal lines. They are especially
useful when constructing accurate orthographic drawings or
architectural drawings.
French Curves are purchased in sets of three or four. They are
used to draw curves by finding the section of curve that
matches the desired shape on the profile of the curve. Some
French Curves also have either circles or ellipses of various
sizes cut out. These can be way as circle or ellipse templates.
Assist. Prof. Dr. İhsan TOKTAŞ
İndirilen dokuman çıktı alınarak ders notu olarak kullanılacak, dönem boyunca dersler bu dokuman üzerinden takip
edilecektir. Bu bağlamda öğrenci ders dokümanını tam olarak dönem boyunca yanında bulundurmalıdır.

Ders dokumanı olmayan öğrenci derse katılamaz.

Dokuman hiçbir şekilde ciltlenmemeli, zımbalanmamalı ya da spiral yapılmamalıdır.

Bir arada tutabilmek için delgeç ile delinerek bir dosyada tutulabilir.

Ders dokumanı temiz olarak kullanılmalıdır. Öğretim üyesi gerek gördüğünde, zaman belirtmeksizin istediği
sayfaları ödev mahiyetinde toplayabilir.