Maxima Water Softener
Light Commercial
Optional Integrated Bypass for GS6000
Model GS6000 Bypass
Code: GSBP34 for ¾" male bsp
Code: GSBP44 for 1" male bsp
Model: GS6000
Code: GS6004
Operation: Meter control with proportional brining
Dimensions: 1,085H x 345W x 625D
Dimensions: 1,085H x 345W x 698D
Connections: ¾" male
7 reasons why Maxima GS6000…
6,000 litres per regen at 300ppm
Intelligent microprocessor that controls, monitors and remembers your water use
High flow rates (up to 75 lpm) and low pressure drops
Proportional brining as standard
—up to 57% salt savings
Suitable for up to 28mm supplies
Proven long life and accurate metering system
7 year parts and 2 years labour guarantee
High Capacity
Model
Litres of
solvent free resin
Salt use
per regeneration
Capacity per regen
@ 300ppm
Flow rates
lpm
GS6000
35
3.2–5.3kg
6,000 litres
75
*denotes 1" upgrade available. Code: RSK008—see ancillaries.
22
Notes:
1. Where a male thread is stated it refers to male BSP in all instances.
2. Where speedfit is stated it can also be known as ‘push fit’.
3. All information, figures and specification are correct at time of printing and given in good faith.
Omissions & Errors excepted.
4. As part of ongoing research and development, we reserve the right to alter design or specification without prior notice.
5. All guarantees are given in accordance with Monarch Waters National Service Coverage Area Agreement
—full details are available on www.monarchwater.co.uk or by calling Monarch directly for a printed version.
6. All water softeners need operating pressures between 1.5–5 bars (dynamic).
7. All Scaleout units need operating pressures between 1.5–5 bars (dynamic).
8. All items to be protected from freezing.
9. All cold water softeners must be limited to water temperature not exceeding 50ºC.
10. All hot water softeners must be limited to water temperature not exceeding 65ºC.
11. All Scaleouts are to be limited to water temperature not exceeding 50ºC.
12. Water softener capacities are based on a water hardness of 300ppm.
13. All dimensions are shown in millimetres.
27