PIPE GASKET LUBRICANT
DESIGNED SPECIFICALLY FOR LUBRICATING
GASKET JOINTS ON PIPE AND MANHOLES
Underwater Lube
• Specially formulated for the most demanding installation conditions.
• Designed to meet wash test for subaqueous lubricants in accordance with
ASTM C-497, Section 12.3.
• Resists wash-off.
• Freeze-resistant.
• Meets durometer and volume change test requirements in accordance with
ASTM C-497, Section 12.2 and D-2240.
• Consistency stable from + 20ºF (-7ºC) to + 90ºF (+ 32ºC).
• Available in 1 gallon (3.9 L) (8 lb.) and 3 1/2 gallon (13.5 L) (27.5 lb.) pails.
Regular Lube
• Our original pipe joint lube.
• Meets durometer and volume change test requirements in accordance with
ASTM C-497, Section 12.2 and D-2240.
• Provides reliable, economical lubrication in all climates.
• Highly freeze-resistant.
• Consistency stable from 0ºF (-17ºC) to ± 150ºF (± 65ºC).
• Available in 1 gallon (3.9 L) (8 lb.) and 3 1/2 gallon (13.5 L) (25 lb.) pails.
• NSF approved for use in potable water systems.
Size
Gallons Liters
Type
Weight
Pounds Kilograms
Part No.
Pallet Qty.
Underwater
1 gal.
3.9 L
8 lbs.
3.63 kg
130.17
144
Underwater
3.5 gal.
13.5 L
27.5 lbs.
12.5 kg
130.525
48
Regular
1 gal.
3.9 L
8 lbs.
3.63 kg
130.107
144
Regular
3.5 gal.
13.5 L
25 lbs.
12.5 kg
130.105
48
USAGE TABLES AND INSTRUCTIONS ON NEXT PAGE.
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2012.
Phone: 800-348-7325
Fax: (260) 436-1908
110
PRESS-SEAL CORPORATION
Protecting Our Planet’s Clean Water Supply
ISO 9001:2008 Registered • ISO/IEC 17025 Accredited
Email: [email protected]
Web: www.press-seal.com
V
E
R
S
I
O
N
9-16
PIPE GASKET
LUBRICANT
FOR PRESS-SEAL PROFILE
RUBBER GASKETS
The lubricating compounds
listed on the front page are manufactured expressly for lubricating O-Ring
& profile rubber gasket joints on concrete pipe or manholes.
INSTRUCTIONS
1. Clean all dirt, dust, and foreign
matter from the joint.
2. Stretch the gasket over the spigot
end of the pipe and equalize by
pulling the gasket sealing lobe about
one inch and releasing the gasket.
Repeat every 3 to 4 inches around
the circumference of the pipe.
3. Apply lubricating compound on
bell only to insure proper lubrication.
FOR PRESS-SEAL O-RING
RUBBER GASKETS
The lubricating compounds listed
on the front page are manufactured expressly for lubricating O-Ring & profile
rubber gasket joints on concrete pipe or
manholes.
INSTRUCTIONS
1. Clean all dirt, dust, and foreign matter
from the joint.
2. Stretch the gasket over the spigot end
of the pipe and equalize by inserting
a screw driver or a flat object under the
O-Ring gasket and rotating it at least
one and a half times the circumference
of the pipe.
3. Apply lubricating compound on bell
and gasket to insure proper lubrication.
USAGE CHARTS
For PROFILE Rubber Gaskets ONLY
Pipe
Size
per 100 joints (U.S.)
Pipe
Lbs.
Lbs.
Size
per 100 joints (metric)
Pipe Size
kg
Pipe SIze
kg
8
12
48
82
200 mm
5.5 kg
1200 mm
34.3 kg
10
15
54
92
250 mm
6.8 kg
1350 mm
41.8 kg
12
18
60
104
300 mm
8.2 kg
1500 mm
47.3 kg
15
22
66
113
375 mm
10.0 kg
1650 mm
51.4 kg
18
26
72
122
450 mm
11.8 kg
1800 mm
55.5 kg
21
30
78
159
525 mm
13.6 kg
1950 mm
72.3 kg
24
43
84
173
600 mm
19.5 kg
2100 mm
78.6 kg
27
49
90
184
675 mm
22.3 kg
2250 mm
83.6 kg
30
54
96
196
750 mm
25.5 kg
2400 mm
89.1 kg
33
58
102
210
825 mm
28.4 kg
2550 mm
95.5 kg
36
63
108
221
950 mm
28.6 kg
2700 mm
100.5 kg
42
73
1100 mm 33.2 kg
For O-RING Rubber Gaskets ONLY
per 100 joints (U.S.)
per 100 joints (metric)
Pipe
Pipe
Lbs.
Lbs. Pipe Size
kg
Pipe SIze
Size
Size
kg
8
15
48
103
200 mm
5.5 kg
1200 mm
34.3 kg
10
19
54
115
250 mm
6.8 kg
1350 mm
41.8 kg
12
23
60
130
300 mm
8.2 kg
1500 mm
47.3 kg
15
28
66
141
375 mm
10.0 kg
1650 mm
51.4 kg
18
33
72
153
450 mm
11.8 kg
1800 mm
55.5 kg
21
38
78
199
525 mm
13.6 kg
1950 mm
72.3 kg
24
54
84
215
600 mm
19.5 kg
2100 mm
78.6 kg
27
61
90
230
675 mm
22.3 kg
2250 mm
83.6 kg
30
68
96
245
750 mm
25.5 kg
2400 mm
89.1 kg
33
73
102
262
825 mm
28.4 kg
2550 mm
95.5 kg
36
79
108
276
950 mm
28.6 kg
2700 mm
100.5 kg
42
91
1100 mm 33.2 kg
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2012.
Phone: 800-348-7325
Fax: (260) 436-1908
111
PRESS-SEAL CORPORATION
Protecting Our Planet’s Clean Water Supply
ISO 9001:2008 Registered • ISO/IEC 17025 Accredited
Email: [email protected]
Web: www.press-seal.com
V
E
R
S
I
O
N
9-16