PALMAS MILL
Declaration of Performance
DoP No GRP/PP/13/CE4
PINE PLYWOOD EN 636-2 G
Product identification
Product Types
Intended uses
9mm
12mm 12,5mm 15mm 18mm 21mm 24mm 27mm
Internal use as non-structural components in humid conditions
Name and contact address
of the manufacturer
INDUSTRIA DE COMPENSADOS GUARARAPES
Rua Alcina Santos Araújo, 411, São Francisco
Palmas, PR, 85555-000, BRAZIL
GUARARAPES - PALMAS
EN 13986:2004
4
Mill identification
Harmonized standard
AVCP System
Essential characteristics
Release of formaldehyde
Bond quality
Density
Water vapour permeability
Airborne sound insulation
Sound absorption coefficient
Thermal conductivity
Content of pentachlorophenol
Declared performance
E1 (phenolic resin bonded)
Class 3
560 Kg/m3
Wet - 70 μ / Dry - 200 μ
R = 13 x lg (mA) + 14
0,10 / 0,30
0,13 W/(m.K)
< 5 ppm
Declared performance
+0 / -3.0mm
+/- 1.0 mm/m
+/- 1.0 mm/m
See below per Type
Dimensional tolerances
Length and width
Squareness
Straigthness
Thickness
Product Type
Maximum (mm)
Minimum (mm)
9mm
10,1
8,3
Declared performance
See below per Type
Essential characteristics
Bending properties
Bending strength
(N/mm2)
Type
Fk, 0
Fk, 90
Place and date of issue
Palmas, 1st July 2013.
12mm 12,5mm 15mm
13,2
13,3
16,3
11,2
11,7
14,2
9mm
35,9
8,5
12mm 12,5mm 15mm
29,8
36,5
32,4
15,9
14,8
16,9
Issued by
Gerson Aldo de Souza
Technical Manager
Technical Specification
EN 13986 Annex B Note 2
EN 314-1/2 Type testing
EN 323 Type testing
EN 13986 Table 9
EN 13986 part 5.10
EN 13986 Table 10
EN 13986 Table 11
EN 13986 part 5.18
Technical Specification
EN 324-2
EN 324-1 / EN 315 / EN 12871
18mm
19,3
17,1
21mm
21,8
20,2
24mm
25,5
22,9
27mm
28,6
25,8
Technical Specification
EN 310 Type testing
18mm
32,6
16,7
21mm
29,7
16,7
24mm
25,9
18,3
Signature
27mm
24,1
18,2
PALMAS MILL
CE Marking
DoP No GRP/PP/13/CE4
PINE PLYWOOD EN 636-2 G
Product identification
Standard panel markings
Product Types
9mm
12mm 12,5mm 15mm
18mm
21mm
24mm
CE symbol
GUARAPLY
PALMAS
04
GRP/PP/13/CE4
EN 13986:2004
Bond Class 3
E1
PINE PLYWOOD
EN 636-2 G
XXmm
Trade Mark
Manufacturing mill
Year of first CE Marking
Declaration of Performance number
Harmonized standard
Bond quality
Release of formaldehyde
Product identification
Product type
or
CE GUARAPLY PALMAS 04 GRP/PP/13/CE4 EN 13986:2004 BondClass3 E1
PINE PLYWOOD EN636-2 G XXmm
Place and date of issue
Palmas, 1st July 2013.
Issued by
Gerson Aldo de Souza
Technical Manager
Signature
27mm
PALMAS MILL
REACH Statement
DoP No GRP/PP/13/CE4
Product identification
Product Types
Name and contact address
of the manufacturer
PINE PLYWOOD EN 636-2 G
9mm
12mm 12,5mm 15mm
And akowledging the
We hereby state that
Place and date of issue
Palmas, 1st July 2013.
21mm
24mm
27mm
INDUSTRIA DE COMPENSADOS GUARARAPES
Rua Alcina Santos Araújo, 411, São Francisco
Palmas, PR, 85555-000, BRAZIL
GUARARAPES - PALMAS
Mill identification
In compliance to
18mm
REGULATION (EC) No 1907/2006
OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals
(REACH)
Article 33
Duty to communicate information on substances in articles
Candidate List of Substances of Very High Concern for Authorisation
(published in accordance with Article 59(10) of the REACH Regulation)
Last updated: 20 June 2013 to contain 144 substances.
We are the ARTICLE producer of the above mentioned product.
The above mentioned product is softwood plywood made solely
of softwood veneers and bonded with phenol-formaldehyde resin,
and is not treated with any chemicals.
The above mentioned product is an ARTICLE which do not contain
more than 0.1% of any of the SUBSTANCES of the SVHC list.
NOTIFICATION is thus not required for this ARTICLE.
Issued by
Gerson Aldo de Souza
Technical Manager
Signature