DESCRIPTION/SUGGESTED SPECIFICATIONS SPITFIRE P370 4 X Faster Than Using Spindle Insulation Anchors 5" Insulation Pin Capacity Automatic Piston Return Power Adjustment Insulation Fastening System— MOST COMMON APPLICATION IS INSULATION TO CONCRETE The P370 System is 4 times faster than the traditional installation method. It allows the installer to attach insulation in one simple step without the use of adhesives or cutting spindle insulation anchors anymore. ADVANTAGES 4 times faster than traditional insulation The tool allows you to fasten the insulation fastening method saving time and labor costs Fasten the insulation directly to the concrete no need to glue and cut spindle insulation anchors anymore. The fastening is consistent and clean looking in tight spaces through pipes and sprinkler systems Ramset Disc Technology—loads only advance after 10-20% of load waste The tool has a 5 Year Warranty FASTENER SELECTION CHART PIN # INSUL4COMBO INSUL4.75-5COMBO DESCRIPTION MOST COMMON APPLICATION Insulation Pin and Load Combo - 4” Insulation Pin and Load Combo - 4-3/4” - 5” 4" Insulation to Concrete 4-3/4" - 5" Insulation to Concrete APPLICATIONS The SPITFIRE P370 is ideal for fastening insulation to concrete. In one simple operation the fastener will secure the insulation directly on to the concrete no need to glue and cut spindle insulation anchors anymore. Part No. SPITFIRE SPECIFICATIONS Part No. SPITFIRE Adaptor Part No. INSUL ADAPTOR .25 caliber 10-shot strip loads 2, 3, 4 Part No. INSUL ADAPTOR Weight: 6.2 pounds Length: 19-3/4" Muzzle Bushing O.D.: 5/8" POWER LEVEL GUIDE FOR LOADS All loads are color coded and load level numbered. As the number increases, the power level increases. 2 ....Brown Always start with the lightest load. If the fastener does not set completely, use the next higher load and repeat the process. 4 ....Yellow Least Powerful 3 ....Green Most Powerful Maximum Pin Length: 5" Insulation Construction Products Call our toll free number 800-387-9692 or visit www.itwconstruction.ca for general information. Visit Ramset’s web site www.ramset.com for the most current product and technical information. R 33 Spitfire P370 Performance/Submittal RAMSET FASTENERS MAY BE SPECIFIED BY THEIR TYPE OR CATALOG NUMBER TO SATISFY FASTENING REQUIREMENTS. PIN SPECIFICATIONS ITW INSULATION FASTENERS Plastic Sleeve made from Polyethylen High Density Steel Pin Austempered to a core hardness of 50-55 HRc, Electrogalvanizing, min zinc coating 7 µm The nail head is moulded in thermoplastic-elastomer to improve the corrosion resistance A protection cap to improve aesthetics and to reduce thermic transmission PERFORMANCE TABLES Tension INSULATION THICKNESS MM THE ALLOWABLE TENSION LOAD IS CALCULATED FROM THE MEAN ULTIMATE LOAD AND A SAFETY FACTOR HIGHER THAN 4. 40 45 50 60 70 75 80 100 120 67 lbs (0.30 kN) Allowable Tension Load Shear INSULATION THICKNESS MM 40 THE ALLOWABLE SHEAR LOADS ARE CALCULATED FROM THE MEAN LOADS WITH A DISPLACEMENT EQUAL TO 10 MM AND A SAFETY FACTOR HIGHER THAN 3. 45 50 60 70 75 80 100 Polystyren Density =15 kg/m3 Polystyren Density =30 kg/m3 120 29 lbs (0.13 kN) 49 lbs (0.20 kN) Pull-Through INSULATION THICKNESS MM 40 Rock wool density =120 kg/m3 Polystyren Density =15 kg/m3 Polystyren Density =30 kg/m3 THE ALLOWABLE SHEAR LOADS ARE CALCULATED FROM THE MEAN LOADS WITH A DISPLACEMENT EQUAL TO 10 MM AND A SAFETY FACTOR HIGHER THAN 3. 45 50 60 70 75 80 100 27 lbs (0.12 kN) 120 36 lbs (0.16 kN) 49 lbs (0.20 kN) 67 lbs (0.30 kN) SPACING AND EDGE DISTANCE ANCHOR DEPTH Between 2 fixings : minimum distance of 90 mm It must be between 25 and 31 mm to achieve the Allowable loads given above. Distance from free edge : minimum distance of 100 mm APPLICATION LIMIT The mean compressive strength of the concrete must be between C20/25 and C40/50. R 34 Construction Products Call our toll free number 800-387-9692 or visit www.itwconstruction.ca for general information. Visit Ramset’s web site www.ramset.com for the most current product and technical information.
© Copyright 2024 Paperzz