Page 1 of 6
MgCl2
SOLVO Biotechnology
MSDS
Material Safety Data Sheet for MgCl2
Date Updated: 27/MAY/2005
Version 1.5
According to 91/155/EEC
1.
Product and Company Information
Product Name: MAGNESIUM CHLORIDE HEXAHYDRATE
Company: SOLVO
2.
Composition/Information on Ingredients
Product Name: MAGNESIUM CHLORIDE HEXAHYDRATE
CAS#: 7791-18-6
EC no: 232-094-6
Annex I Index Number: none
Formula MgCl2.6H2O
Molecular Weight: 203.31 AMU
3.
Hazards Identification
3.1
Special indication of hazards to humans and the environment
Not hazardous according to Directive 67/548/EEC.
4.
First Aid Measures
4.1
After inhalation
If inhaled, remove to fresh air. If breathing becomes difficult, call a
physician.
4.2
After skin contact
In case of contact, immediately wash skin with soap and copious amounts of
water.
4.3
After eye contact
In case of contact with eyes, flush with copious amounts of water for at least
15 minutes. Assure adequate flushing by separating the eyelids with fingers.
Call a physician.
Page 1
Page 2 of 6
MgCl2
SOLVO Biotechnology
MSDS
4.4
After ingestion
If swallowed, wash out mouth with water provided person is conscious. Call
a physician.
5.
Fire Fighting Measures
5.1
Extinguishing media
Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate
foam.
5.2
Special risks
Specific Hazard(s): Emits toxic fumes under fire conditions.
5.3
Special protective equipment for firefighters
Wear self-contained breathing apparatus and protective clothing to prevent
contact with skin and eyes.
6.
Accidental Release Measures
6.1
Procedure(s) of personal precaution(s)
Exercise appropriate precautions to minimize direct contact with skin or
eyes and prevent inhalation of dust.
6.2
Methods for cleaning up
Sweep up, place in a bag and hold for waste disposal. Avoid raising dust.
Ventilate area and wash spill site after material pickup is complete.
7.
Handling and Storage
7.1
Handling
Directions for Safe Handling: Avoid inhalation. Avoid contact with eyes,
skin, and clothing. Avoid prolonged or repeated exposure.
7.2
Storage
Conditions of Storage: Keep tightly closed.
7.3
Special requirements
Moisture sensitive. Hygroscopic.
Page 2
Page 3 of 6
MgCl2
SOLVO Biotechnology
MSDS
8.
Exposure Controls / Personal Protection
8.1
Engineering controls
Safety shower and eye bath. Mechanical exhaust required.
8.2
General hygiene measures
Wash thoroughly after handling.
8.3
Personal protective equipment
Respiratory Protection: Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).
Respiratory protection is not required. Where protection from nuisance
levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust
masks.
Hand Protection: Protective gloves.
Eye Protection: Chemical safety goggles.
Page 3
Page 4 of 6
MgCl2
SOLVO Biotechnology
MSDS
9.
Physical and Chemical Properties
Appearance:
Physical State: Solid
Property
pH
BP/BP Range
MP/MP Range
Flash Point
Flammability
Autoignition Temp
Oxidizing Properties
Explosive Properties
Explosion Limits
Vapor Pressure
SG/Density
Partition Coefficient
Viscosity
Vapor Density
Saturated Vapor Conc.
Evaporation Rate
Bulk Density
Decomposition Temp.
Solvent Content
Water Content
Surface Tension
Conductivity
Miscellaneous Data
Solubility
Value
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1,57 g/cm3
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10. Stability and Reactivity
10.1 Stability
Stable: Stable.
Conditions to Avoid: Moisture
Materials to Avoid: Strong oxidizing agents.
10.2 Hazardous decomposition products
Hydrogen chloride gas, Magnesium oxide.
10.3 Hazardous polymerization
Will not occur
Page 4
Page 5 of 6
MgCl2
SOLVO Biotechnology
MSDS
11. Toxicological Information
RTECS NUMBER: OM2975000
11.1 Acute toxicity
LD50 Oral Rat 8100 mg/kg
LD50 Oral Mouse 7600 mg/kg
Remarks: Behavioral: Somnolence (general depressed activity). Behavioral:
Excitement.
LD50 Intraperitoneal Mouse 775 mg/kg
Remarks: Behavioral: Somnolence (general depressed activity). Behavioral:
Excitement.
11.2 Signs and symptoms of exposure
To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated. Stomach pains, vomiting,
diarrhea. Exposure can cause: Can cause CNS depression.
11.3 Route of exposure
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be harmful if inhaled.
Ingestion: May be harmful if swallowed.
11.4 Target organ information
G.I. System. Kidneys. Central nervous system.
11.5 Chronic exposure - carcinogen
Hamster
12 GM/L
Cell Type: lung
Cytogenetic analysis
12. Ecological Information
No data available.
Page 5
Page 6 of 6
MgCl2
SOLVO Biotechnology
MSDS
13. Disposal Considerations
13.1 Substance disposal
Contact a licensed professional waste disposal service to dispose of this
material. Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.
14. Transport Information
14.1 RID/ADR
Non-hazardous for road transport.
14.2 IMDG
Non-hazardous for sea transport.
14.3 IATA
Non-hazardous for air transport.
15. Regulatory Information
Not hazardous according to Directive 67/548/EEC.
15.1 Country specific imformation
Germany:WGK: 1,
Switzerland
ID-Number: 259
Swiss poison class:5
KBwS-Decision
16. Other Information
16.1 Warranty
The above information is believed to be correct but does not purport to be
all inclusive and shall be used only as a guide. The information in this
document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not
represent any guarantee of the properties of the product. SOLVO shall not
be held liable for any damage resulting from handling or from contact with
the above product.
16.2 Disclaimer
For R&D use only. Not for drug, household or other uses.
Page 6
Page 1 of 7
TRIS
SOLVO Biotechnology
MSDS
Material Safety Data Sheet for TRIS
Date Updated: 08/FEB/2006
Version 1.7
According to 91/155/EEC
1. Product and Company Information
Product Name: TRIZMA BASE REAGENT GRADE
Company: SOLVO
2. Composition/Information on Ingredients
Product Name: TRIS (HYDROXYMETHYL) AMINOMETHANE FREE BASE
CAS#: 77-86-1
EC no: 201-064-4
Annex I Index Number: none
Formula: NaN3C4H11NO3
Molecular Weight: 121.14 AMU
Synonyms: Addex-tham
2-Amino-2-(hydroxymethyl)propane-1,3-diol
2-Amino-2-(hydroxymethyl)-1,3-propanediol
2-Amino-2-methylol-1,3-propanediol
Aminotrimethylolmethane
Aminotris(hydroxymethyl)methane
Methylamine,1,1,1-tris(hydroxymethyl)Pehanorm
Talatrol
THAM-E
THAM-set
Trimethylolaminomethane
Tris (buffering agent)
Trisamine
Tris-amino
Trisaminol
Tris buffer
Tris-hydroxymethyl-aminomethan (German)
Tris-hydroxymethylaminomethane
Tris(hydroxymethyl)methanamine
Tris(hydroxymethyl)methylamine
Trispuffer
Tris-steril
Trometamol
Trometamole
Page 1
Page 2 of 7
TRIS
SOLVO Biotechnology
MSDS
Tromethamine
Tromethane
Tromethanmin
Tutofusin tris
3. Hazards Identification
3.1
Special indication of hazards to humans and the environment
Irritating to eyes, respiratory system and skin.
4. First Aid Measures
4.1
After inhalation
If inhaled, remove to fresh air. If not breathing give artificial respiration. If
breathing is difficult, give oxygen.
4.2
After skin contact
In case of contact, immediately wash skin with soap and copious amounts of
water.
4.3
After eye contact
In case of contact, immediately flush eyes with copious amounts of water
for at least 15 minutes.
4.4
After ingestion
If swallowed, wash out mouth with water provided person is conscious. Call
a physician.
5. Fire Fighting Measures
5.1
Extinguishing media
Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate
foam.
5.2
Special risks
Specific Hazard(s): Emits toxic fumes under fire conditions.
5.3
Special protective equipment for firefighters
Wear self-contained breathing apparatus and protective clothing to prevent
contact with skin and eyes.
Page 2
Page 3 of 7
TRIS
SOLVO Biotechnology
MSDS
6. Accidental Release Measures
6.1
Personal precaution procedures to be followed in case of leak or spill
Sweep together the wetted material carefully and fill into marked, sealed
containers.
6.2
Procedure(s) of personal precaution(s)
Wear respirator, chemical safety goggles, rubber boots, and heavy rubber
gloves.
6.3
Methods for cleaning up
Sweep up, place in a bag and hold for waste disposal. Avoid raising dust.
Ventilate area and wash spill site after material pickup is complete.
7. Handling and Storage
7.1
Handling
Directions for Safe Handling: Do not breathe dust. Avoid contact with eyes,
skin, and clothing. Avoid prolonged or repeated exposure.
7.2
Storage
Conditions of Storage: Keep tightly closed.
7.3
Special requirements
Hygroscopic.
8. Exposure Controls / Personal Protection
8.1
Engineering controls
Safety shower and eye bath. Mechanical exhaust required.
8.2
General hygiene measures
Wash thoroughly after handling.
8.3
Personal protective equipment
Respiratory Protection: Use respirators and components tested andapproved
under appropriate government standards such as NIOSH (US) or CEN (EU).
Where risk assessment shows air-purifying respirators are appropriate use a
dust mask type N95 (US) or type P1 (EN 143) respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.
Page 3
Page 4 of 7
TRIS
SOLVO Biotechnology
MSDS
9. Physical and Chemical Properties
Appearance:
Physical State: Solid
Color: Colorless
Form: Fine crystals
Property
Value
pH
BP/BP Range
MP/MP Range
Flash Point
Flammability
Autoignition Temp
Oxidizing Properties
Explosive Properties
Explosion Limits
Vapor Pressure
SG/Density
Partition Coefficient
Viscosity
Vapor Density
Saturated Vapor Conc.
Evaporation Rate
Bulk Density
Decomposition Temp.
Solvent Content
Water Content
Surface Tension
Conductivity
Miscellaneous Data
Solubility
10,5 - 12
219,0 – 220,0
170,2 – 172,3°C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.8 kg/l
N/A
N/A
N/A
N/A
N/A
N/A
Solubility in Water:4 M in H2O, 20°C
Solvent: complete, colorless
At Temperature
or Pressure
10 mmHg
Page 4
Page 5 of 7
TRIS
SOLVO Biotechnology
MSDS
10. Stability and Reactivity
10.1 Stability
Stable: Stable.
Conditions to Avoid: Moisture.
Materials to Avoid: Strong oxidizing agents.
10.2 Hazardous decomposition products
Carbon monoxide, Carbon dioxide, Nitrogen oxides.
10.3 Hazardous polymerization
Will not occur
11. Toxicological Information
RTECS NUMBER: TY2900000
11.1 Acute toxicity
LD50 Oral Rat 5900 mg/kg
LD50 Intravenous Rat 1800 mg/Kg
LD50 Intravenous Mouse 1210 mg/Kg
11.2 Signs and symptoms of exposure
To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
11.3 Route of exposure
Skin Contact: Causes skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: Causes eye irritation.
Inhalation: May be harmful if inhaled. Material is irritating to mucous
membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.
12. Ecological Information
No data avaiable
Page 5
Page 6 of 7
TRIS
SOLVO Biotechnology
MSDS
13. Disposal Considerations
13.1 Substance disposal
Contact a licensed professional waste disposal service to dispose of this
material. Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.
14. Transport Information
14.1 RID/ADR
Non-hazardous for road transport.
14.2 IMDG
Non-hazardous for sea transport.
14.3 IATA
Non-hazardous for air transport.
15. Regulatory Information
15.1 Classifications and labeling according to EU directives
Indication of danger: Xi
Irritant.
R-PHRASES: 36/37/38
Irritating to eyes, respiratory system and skin.
S-PHRASES: 26-36
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice. Wear suitable protective clothing.
15.2 Country specific imformation
Germany:WGK: 2 ID-Number:4650 Classificaton according to appendix 3.
Switzerland: Swiss poison class: frei
Norway: Declaration number:67087
Page 6
Page 7 of 7
TRIS
SOLVO Biotechnology
MSDS
16. Other Information
16.1 Warranty
The above information is believed to be correct but does not purport to be
all inclusive and shall be used only as a guide. The information in this
document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not
represent any guarantee of the properties of the product. SOLVO shall not
be held liable for any damage resulting from handling or from contact with
the above product.
16.2 Disclaimer
For R&D use only. Not for drug, household or other uses.
Page 7
Page 1 of 6
MgATP
SOLVO Biotechnology
MSDS
Material Safety Data Sheet for MgATP
Date Updated: 06/FEB/2006
Version 1.4
According to 91/155/EEC
1.
Product and Company Information
Product Name: ADENOSINE 5'-TRIPHOSPHATE DISODIUM
Company: SOLVO
2.
Composition/Information on Ingredients
Product Name: ADENOSINE 5'-TRIPHOSPHATE DISODIUM (WITH
ETHANOL,METHANOL,ACETONE)
CAS#: 987-65-5
EC no: none
Annex I Index Number: none
Formula: C10H14N5Na2O13P3
Molecular Weight: 551.1 AMU
The following substances are present as residual components of production.
ETHYL ALCOHOL, NON-DENATURED, 200 PROOF <= 4%
CAS#: 64-17-5
EC no:200-578-6
Annex I Index Number: 603-002-00-5
Symbols: F
R-Phrases: 11
Highly flammable.
METHANOL <= 1%
CAS#: 67-56-1
EC no: 200-659-6
Annex I Index Number: 603-001-00-X
Symbols: F-T
R-Phrases: 11-23/24/25-39/23/24/25
Highly flammable. Toxic by inhalation, in contact with skin and if swallowed.
Toxic: danger of very serious irreversible effects through inhalation, in contact
with skin and if swallowed.
ACETONE <= 1%
CAS#: 67-64-1
EC no: 200-662-2
Page 1
Page 2 of 6
MgATP
SOLVO Biotechnology
MSDS
Annex I Index Number: 606-001-00-8
Symbols: F-Xi
R-Phrases: 11-36-66-67
Highly flammable. Irritating to eyes. Repeated exposure may cause skin dryness
or cracking. Vapors may cause drowsiness and dizziness.
3.
Hazards Identification
3.1
Special indication of hazards to humans and the environment
Not hazardous according to Directive 67/548/EEC.
4.
First Aid Measures
4.1
After inhalation
If inhaled, remove to fresh air. If breathing becomes difficult, call a
physician.
4.2
After skin contact
In case of contact, immediately wash skin with soap and copious amounts of
water.
4.3
After eye contact
In case of contact with eyes, flush with copious amounts of water for at least
15 minutes. Assure adequate flushing by separating the eyelids with fingers.
Call a physician.
4.4
After ingestion
If swallowed, wash out mouth with water provided person is conscious. Call
a physician.
5.
Fire Fighting Measures
5.1
Extinguishing media
Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate
foam.
5.2
Special risks
Specific Hazard(s): Emits toxic fumes under fire conditions.
5.3
Special protective equipment for firefighters
Wear self-contained breathing apparatus and protective clothing to prevent
contact with skin and eyes.
Page 2
Page 3 of 6
MgATP
SOLVO Biotechnology
MSDS
6.
Accidental Release Measures
6.1
Procedure(s) of personal precaution(s)
Exercise appropriate precautions to minimize direct contact with skin or
eyes and prevent inhalation of dust.
6.2
Methods for cleaning up
Sweep up, place in a bag and hold for waste disposal. Avoid raising dust.
Ventilate area and wash spill site after material pickup is complete.
7.
Handling and Storage
7.1
Handling
Directions for Safe Handling: Avoid inhalation. Avoid contact with eyes,
skin, and clothing. Avoid prolonged or repeated exposure.
7.2
Storage
Conditions of Storage: Keep tightly closed.
Store at -20°C
8.
Exposure Controls / Personal Protection
8.1
Engineering controls
Safety shower and eye bath. Mechanical exhaust required.
8.2
General hygiene measures
Wash thoroughly after handling.
8.3
Personal protective equipment
Respiratory Protection: Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).
Respiratory protection is not required. Where protection from nuisance
levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust
masks.
Hand Protection: Protective gloves.
Eye Protection: Chemical safety goggles.
Page 3
Page 4 of 6
MgATP
SOLVO Biotechnology
MSDS
9.
Physical and Chemical Properties
Appearance:
Physical State: Solid
Property
pH
BP/BP Range
MP/MP Range
Flash Point
Flammability
Autoignition Temp
Oxidizing Properties
Explosive Properties
Explosion Limits
Vapor Pressure
SG/Density
Partition Coefficient
Viscosity
Vapor Density
Saturated Vapor Conc.
Evaporation Rate
Bulk Density
Decomposition Temp.
Solvent Content
Water Content
Surface Tension
Conductivity
Miscellaneous Data
Solubility
Value
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10. Stability and Reactivity
10.1 Stability
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
10.2 Hazardous decomposition products
Carbon monoxide, Carbon dioxide, Nitrogen oxides, Sodium/sodium
oxides, Phosphorous oxides.
10.3 Hazardous polymerization
Will not occur
Page 4
Page 5 of 6
MgATP
SOLVO Biotechnology
MSDS
11. Toxicological Information
11.1 Signs and symptoms of exposure
To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
11.2 Route of exposure
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: May be harmful if inhaled. Material may be
irritating to mucous membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.
11.3 Target organ information
Nerves. Liver. Kidneys. Heart.
12. Ecological Information
No data available.
13. Disposal Considerations
13.1 Substance disposal
Contact a licensed professional waste disposal service to dispose of this
material. Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.
14. Transport Information
14.1 RID/ADR
Non-hazardous for road transport.
14.2 IMDG
Non-hazardous for sea transport.
14.3 IATA
Non-hazardous for air transport.
Page 5
Page 6 of 6
MgATP
SOLVO Biotechnology
MSDS
15. Regulatory Information
15.1 Classification and labeling according to EU directives
S-PHRASES: 22-24/25
Do not breathe dust. Avoid contact with skin and eyes.
Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).
15.2 Country specific imformation
Germany:WGK: 1,
Self classification
16. Other Information
16.1 Warranty
The above information is believed to be correct but does not purport to be
all inclusive and shall be used only as a guide. The information in this
document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not
represent any guarantee of the properties of the product. SOLVO shall not
be held liable for any damage resulting from handling or from contact with
the above product.
16.2 Disclaimer
For R&D use only. Not for drug, household or other uses.
Page 6