High Performance Slotless Brushless DC Servo Motors
smooth, quiet motion. Low inductance and high current bandwidth provides precise control. Slotless
outputs.
AMETEK slotless brushless motors have no teeth to attract the magnets, cogging is eliminated, and the
motor produces smooth, quiet rotation. The absence of teeth also provides room for larger and more
wire in the windings, which means that slotless moters can generate more torque without a correslotted and slotless motors, eddy currents are induced as the magnets pass the stator. However, these
currents are weaker in slottless motors, because the distance between the stack and the magnets is
0.3 oz-in. (0.002 Nm)
0.9 - 1.1 oz-in. (0.006 - 0.007 Nm)
1.8 - 4.3 oz-in. (0.012 - 0.030 Nm)
6.2 - 14.9 oz-in. (0.043 - 0.105 Nm)
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
High Performance Slotless Brushless DC Motors
0.375" x 2.00" (9.53mm x 50.8mm) Series
+.000
-.001
+0
[0,78 -0,02 ]
.031
2.00
[50,80]
Ø
Ø
Ø
3X MOTOR LEADS (MAGNET WIRE)
12” [304,8] LONG
+.000
.079 -.001
+0
[2 -0,02 ]
2X #1-64 UNC-2B
x .09 [2,3] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.218 [5,54] B.C.
.375
[9,53]
+.000
-.001
+0
[3,56 -0,02 ]
.140
INCH
[MM ]
.240
[6,1]
Part/Model Number
Specification
Units
BI-04-100-0.30
Supply Voltage
VDC
oz-in
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
12.0
0.30
0.0021
30000
0.8
6
0.21
0.001
0.41
0.003
0.30
0.003
3.70
4.70
0.07
40000
1.5
1.3
0.0092
1.27
2.9
43
130
9.70E-7
7.0E-9
0.80
22.7
Continuous Torque
Performance (24 V Winding)
40000
Speed (rpm)
2.5
Speed
Current
30000
1.5
20000
1.0
10000
0.5
0
0
0.5
1.0
Torque (oz-in)
1.5
0
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Sensorless
• Stainless Construction
Complementary Products
2.0
Current (A)
50000
Standard Features
• Shielded Ball Bearings
• 2-Pole Rotor
Label
C
A
B
Function
Motor ΦC
Motor ΦA
Motor ΦB
No Hall Sensors
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded at max. winding temperature at 25°C ambient,
mounted to a 5.0”x5.0”x0.25” heatsink
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E1
____
High Performance Slotless Brushless DC Motors
0.5" x 2.10" (12.7mm x 53.3mm) Series
.040 +.000
-.001
[1 +0
]
-0,02
2.100 MAX.
[53,3 MAX.]
.1248
Ø
Ø
[3,17
3X#0-80UNC-2B
x .15[3,8] MAX DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.350 [8,89] B.C.
.500
[12,7]
Ø
MOTOR LEADS #28 AWG
12” [304,8] LONG
+.0000
-.0001
+0
-0,002 ]
.465
[11,81]
+.000
-.001
[6,35 +0
-0,02 ]
.250
INCH
[MM]
Part/Model Number
Specification
Units
BI-05-075-0.54
BI-05-075-1.08
24
0.5
0.0035
31900
0.73
11
0.24
0.002
0.73
0.005
0.54
0.005
9.0
9.6
0.12
44450
2.7
1.95
0.0138
1.07
10.5
18
130
4.60E-6
3.2E-8
1.5
42.5
24
0.6
0.0042
8000
0.45
4
0.27
0.002
1.46
0.01
1.08
0.01
29.2
38.4
0.03
22220
0.8
1.2
0.0085
1.3
8.5
18
130
4.60E-6
3.2E-8
1.5
42.5
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
50000
45000
40000
35000
30000
25000
20000
15000
10000
5000
0
0
Speed
Current
Standard Features
3.0
1.5
1.0
1.0
1.5
Torque (oz-in)
2.0
0
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
2.5
2.0
0.5
• Shielded Ball Bearings
• 4-Pole Rotor
Current (A)
Speed (rpm)
Performance (BI-05-075-0.54)
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x5.0”x0.25” heatsink.
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E2
____
High Performance Slotless Brushless DC Motors
0.5" x 3.0" (12.7mm x 76.2mm) Series
+.000
-.001
+0
[1 -0,02 ]
.040
3.000 MAX.
[76.2 MAX.]
.1248
Ø
Ø
[3,17
3X #0-80 UNC-2B
X .15[3,8] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.350[8,89] B.C.
.500
[12,7]
Ø
.465
[11,81]
MOTOR LEADS #28 AWG
12" [304,8] LONG
+.0000
-.0001
+0
-0,002 ]
.250
[6,3 5
+.000
-.001
+0
-0,02 ]
INCH
[MM]
Part/Model Number
Specification
Units
BI-05-150-0.73
BI-05-150-1.08
24
0.90
0.0064
21000
1.00
13
0.34
0.002
0.99
0.007
0.73
0.007
8.5
11
0.10
32870
2.8
2.79
0.0197
1.29
5.8
13
130
4.90E-6
3.5E-8
2.5
70.9
24.0
0.8
0.0056
6250
0.60
4
0.29
0.002
1.46
0.01
1.08
0.01
26
39
0.05
22220
0.92
1.35
0.0095
1.50
8.1
13
130
4.90E-6
3.5E-8
2.5
70.9
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (BI-05-150-0.73)
Speed (rpm)
30000
Speed
Current
3.5
3.0
25000
2.5
20000
2.0
15000
1.5
10000
1.0
5000
0
0
0.5
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5
Torque (oz-in)
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
Current (A)
35000
Standard Features
• Shielded Ball Bearings
• 4-Pole Rotor
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x5.0”x0.25” heatsink.
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E3
____
High Performance Slotless Brushless DC Motors
0.8" x 2.1" (20mm x 53mm) Series
2.090 MAX.
[53,1 MAX.]
.040
[1]
Ø
.1873
[4,757
MOTOR LEADS #28 AWG
12" [304,8] LONG
4X #2-56 UNC-2B
X .15[3,8] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.580[14,73] B.C.
.785
[19,94]
Ø
Ø
+.0000
-.0001
+0
-0,00 2 ]
.375
[9,53
.500
[12,7]
+.000
-.00 1
+0
-0,02 ]
INCH
[MM]
Part/Model Number
Specification
Units
BI-08-075-0.56
BI-08-075-1.1
12
1.8
0.0127
18400
2.8
25
0.98
0.007
0.757
0.005
0.56
0.005
0.60
0.30
0.40
21430
20
15
0.1059
0.50
5.6
14
130
3.93E-5
2.78E-7
3.0
85
24
2.00
0.0141
19400
1.60
29
1.10
0.008
1.49
0.011
1.10
0.011
1.80
0.90
0.05
21800
13
20
0.1412
0.50
4.30
14
130
3.93E-5
2.78E-7
3.0
85
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (BI-08-075-0.56)
Speed
Current
Speed (rpm)
25000
30
25
20000
20
15000
15
10000
10
5000
5
0
0
5
10
15
Torque (oz-in)
0
20
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
Current (A)
30000
Standard Features
• Shielded Ball Bearings
• 4-Pole Rotor
• Encoders
• Gearboxes (consult factory)
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x5.0”x0.25” heatsink.
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E4
____
High Performance Slotless Brushless DC Motors
0.8" x 2.9" (20mm x 74mm) Series
2.850 MAX.
[72,4 MAX.]
.040
[1]
Ø
.1873
[4,757
Ø
Ø
MOTOR LEADS #28 AWG
12" [304,8] LONG
+.0000
-.0001
+0
-0,002 ]
4X #2-56 UNC-2B
X .15[3,8] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.580[14,73] B.C.
.78 5
[19,94]
.37 5
[9,53
.500
[12,7]
+.000
-.001
+0
-0,02 ]
INCH
[MM]
Part/Model Number
Specification
Units
BI-08-150-0.72
BI-08-150-2.00
12
3.10
0.0219
14100
3.70
33
1.4
0.01
0.97
0.007
0.72
0.007
0.48
0.34
0.50
16670
25
24.3
0.1716
0.71
4.2
11
130
6.20E-5
4.38E-7
5.0
141.7
24
3.9
0.0275
9050
1.60
26
1.5
0.011
2.70
0.019
2.0
0.019
3.2
2.7
0.15
12000
7.5
20.3
0.1433
0.84
3.7
11
130
6.20E-5
4.38E-7
5.0
141.7
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (BI-08-150-0.72)
Speed
Current
Speed (rpm)
15000
35
30
12500
25
10000
20
7500
15
5000
10
2500
0
0
5
5
10 15 20 25
Torque (oz-in)
0
30
•Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
Current (A)
17500
Standard Features
• Shielded Ball Bearings • Neodymium Magnets
• 4-Pole Rotor
• 3-Phase Stator
• Encoders
• Gearboxes (consult factory)
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x 5.0”x 0.25” heatsink.
Connection Chart
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E5
____
High Performance Slotless Brushless DC Motors
1.10" x 2.5" (28mm x 64mm) Series
.062
[1,57]
2.510 MAX.
[63.8 MAX.]
Ø
.1875
[4,763
Ø
Ø
+.0000
-.0001
+0
-0,002 ]
4X #2-56 UNC-2B
X .25[6,4] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.750[19,05] B.C.
1.100
[27,94]
.625
[15,88
+.000
-.001
+0
-0,02 ]
.625
[15,88]
MOTOR LEADS #28 AWG
12" [304,8] LONG
INCH
[MM]
Part/Model Number
Specification
Units
150958-50 / BI-11-075-0.97
150957-00 / BI-11-075-2.20
12.0
6.8
0.048
8400
4.70
42
2.07
0.015
1.31
0.009
0.97
0.009
0.40
0.13
0.60
12370
30.0
39.0
0.2753
0.325
7.50
8.60
130
2.38E-4
1.68E-6
7.5
212.6
24.0
6.2
0.0438
8500
2.30
39
2.16
0.015
2.97
0.021
2.20
0.021
1.90
0.50
0.10
10900
12.60
38
0.2683
0.26
6.9
8.6
130
2.38E-4
1.68E-6
7.5
212.6
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (BI-11-075-097)
Speed
Current
Speed (rpm)
12500
30
25
10000
20
7500
15
5000
10
2500
5
0
0
10
20
30
Torque (oz-in)
0
40
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
Current (A)
15000
Standard Features
• Shielded Ball Bearings
• 4-Pole Rotor
• Encoders
• Gearboxes (consult factory)
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x 5.0”x 0.25” heatsink.
Connection Chart
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E6
____
High Performance Slotless Brushless DC Motors
1.10" x 3.26" (28mm x 83mm) Series
.062
[1,57]
3.2 60 MAX.
[82.9 MAX.]
Ø
.1875
[4,763
Ø
Ø
MOTOR LEADS #28 AWG
12" [304,8] LONG
+.000 0
-.0001
+0
-0,002 ]
4X #2-56 UNC-2B
X .25[6,4] MAX. DEPTH
EQUALLY SPACED AS SHOWN
ON A Ø.750[19,05] B.C.
1.1 00
[27,94]
.62 5
[15,88
+.000
-.00 1
+0
-0,02 ]
.625
[15,88]
INCH
[MM]
Part/Model Number
Specification
Units
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Stall Current
Amps (A)
oz-in
Stall Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (150956-50)
Speed
Current
Speed (rpm)
12500
60
50
10000
40
7500
30
5000
20
2500
10
0
0
20
40
60
Torque (oz-in)
150955-50
12.0
11.4
0.0805
9400
8.4
79
2.93
0.021
1.31
0.009
0.97
0.009
0.20
0.07
0.60
12370
60.0
79.0
0.5577
0.325
5.9
6.5
130
3.73E-4
2.63E-6
10.0
283.5
24.0
11.3
0.0798
5300
2.50
44
3.53
0.025
4.73
0.033
3.50
0.033
1.80
0.61
0.03
6860
13.0
63.0
0.4448
0.34
4.0
6.5
130
3.73E-4
2.63E-6
10.0
283.5
Standard Features
• Shielded Ball Bearings
• 4-Pole Rotor
0
80
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensor Feedback (120º elec.)
• Stainless Construction
Complementary Products
Current (A)
15000
150956-50
• Encoders
• Gearboxes (consult factory)
• Drives
• Autoclavable versions
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 5.0”x 5.0”x 0.25” heatsink.
Function
Label
Motor ΦC
Black
Vcc
Violet
Sensor 3
Blue
Sensor 2
Green
Sensor 1
Yellow
Ground
Orange
Motor ΦA
Red
Motor ΦB
White
120° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
E7
____