NON-CONFIGURABLE MOUNTING PLATE
NON-CONFIGURABLE MOUNTING PLATE,
DESIGNED TO UTILIZE ONLY DECORA TM
STYLE ELECTICAL COMPONENTS.
(2) #8-32 x .25 LG
PAN HEAD SCREW
FSR
FL-200 INSTALLATION INSTRUCTIONS
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
BOX INSTALLATION - STEP 1
BOX INSTALLATION - STEP 2
LOCATE AND POSITION BOX IN ACCORDANCE WITH FLOOR
SCREED TO TOP OF BOX SURFACE FOR 3/16" THICK
PLANS. TOP SURFACE OF TEMPORARY COVER MUST BE SET
CARPET/FLOORING OR SPECIFIC HEIGHT TO ALLOW
FOR THICKER FINISHED FLOOR MATERIAL. HAND
TO MATCH THE HEIGHT OF THE FINISHED FLOOR - ie STONE,
TROWELING RECOMMENDED NEAR BOX EDGES.
WOOD OR CONCRETE - SEE TYPICAL INSTALLATION HEIGHTS.
BOX HAS NO HEIGHT ADJUSTMENT AFTER
LEVEL AND ANCHOR BOX AS REQUIRED. USE SCREWS, NAILS,
OR WIRE TO PREVENT BOX FROM FLOATING DURING POUR.
CONCRETE POUR.
REMOVE AND RETAIN TEMPORARY COVER AND SCREWS.
ROUTE CONDUITS TO BOX AS REQUIRED. GANG BRACKET
SCREWS MUST BE IN PLACE AND BOTTOMED TO ENSURE
SCREW VOIDS AFTER POUR. PLACE THIS INSTALLATION GUIDE
BACK INTO BOX, ALONG WITH ALL SUPPLIED ITEMS, AND
REINSTALL TEMPORARY COVER.
(4) #6-32 FLAT HEAD SCREW
TEMPORARY COVER
CONCRETE SURFACE OR TOP
OF FINISHED FLOOR MATERIAL
(4) LEVELING BOLT
FLOOR BOX TEMPORARY COVER WILL EITHER BE INSTALLED DIRECTLY ON THE BOX OR SHIMMED
TYPICAL INSTALLATION HEIGHTS BASED ON THE COVER AND FLOORING SPECIFICATIONS. SHIM KITS SOLD SEPARATELY (FL-200-CSK).
THE TEMPORARY COVER MAY NOT BE FLUSH WITH THE FINISH FLOOR IN ALL INSTALLATIONS.
Carpeted or Tile Floors, Cover types - BLP, BSQ, B, SLP, SSQ, S
CARPET FLOORING
COVER FLUSH WITH CONCRETE
SCREED FLUSH
TEMPORARY
COVER
CARPET
COVER WITH
EDGING
TILE OR LAMINATE FLOORING
COVER WITH
FINISHED
EDGING
FLOOR
.30
.30
CONCRETE
CONCRETE
FLOOR BOX
INSTALLTING ELECTRONIC COMPONENTS
FLOOR BOX
FLOOR BOX
Vinyl or Stained Concrete, Cover types - SLD-ALUM, SLD-Color
COVER FLUSH WITH CONCRETE
PULL WIRES AND CABLES TO BOX AS NECCESSARY (REMOVAL OF
GANG MOUNTING BRACKETS MAY BE REQUIRED). TERMINATE
WIRES AND CABLES TO ELECTRONIC COMPONENTS, AND INSTALL
ELECTRONIC COMPONENTS ONTO GANG MOUNTING BRACKETS.
REINSTALL TEMPORARY COVER IF FINISHED COVER IS TO BE
INSTALLED AT A LATER DATE.
VINYL FLOORING
TEMPORARY
COVER
SCREED FLUSH
FINISHED
FLOOR
STAINED FLOORING
COVER
COVER
.55
.55
SHIM 1/4"
CONCRETE
GANG
MOUNTING
BRACKET
CONCRETE
INSTALLED
ELECTRONIC
COMPONENT
CONCRETE
CONCRETE
SHIM TO VINYL
THICKNESS
FLOOR BOX
FLOOR BOX
FLOOR BOX
Wood / Floating Wood, Cover types - BLP, BSQ, B, SLP, SSQ, S, SLD-ALUM, SLD-Color
COVER ABOVE CONCRETE
TEMPORARY COVER
FINISHED
FLOOR
CONCRETE
WOOD FLOORING
COVER
FINISHED FLOOR
WOOD FLOORING
FINISHED FLOOR
.55
FLOOR BOX
SLEEP SYSTEM (IF USED)
43092
.30
SHIM 1/4"
CONCRETE
COVER WITH
EDGING
CONCRETE
.55
FLOOR BOX
SLEEP SYSTEM (IF USED)
LIT1558A
GANG MOUNTING BRACKET CONFIGURATION
GANG DIVIDER ASSEMBLY
PER CUSTOMER SPECIFICATIONS, CONFIGURE GANG MOUNTING BRACKETS AS SHOWN BELOW AND
REASSEMBLE INTO BOX (DECORA TM WALL PLATES SHOWN AS REFERENCE AND ARE NOT INCLUDED).
GANG MOUNTING PLATE
(2) #8-32 x .25 LG
FLAT HEAD SCREW
OPTIONAL DIVIDER
GANG MOUNTING PLATE
DIVIDER
DIVIDER
HOLDER
DIVIDER HOLDER
(2) #8-32 x .25 LG
PAN HEAD SCREW
DIVIDER ASSEMBLY
(4) #8-32 x .25 LG
PAN HEAD SCREW
GANG PLATE ASSEMBLY
1-GANG / 1-GANG CONFIGURATION
GANG MOUNTING PLATE
DIVIDER HOLDER
2-GANG CONFIGURATION