Catalog Number:
Date:
Project:
OVERVIEW
The SBGR 10 2P Series incorporates Passive Infrared (PIR) technology into a line powered
occupancy sensor to provide maximum viewing from the fixture. The SBGR 10 2P sensor recess
mounts into a 2.65” (6.73 cm) square opening in a fixture. Its circular coverage pattern is designed
for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where
wall mounting a sensor is not practical. Low ceiling heights are also best covered with the SBGR
10 2P. For example, when mounted at only 7 ft (2.13 m), the height of pick aisles in many
distribution centers, the SBGR 10 2P provides a 32 ft (9.75 m) diameter pattern of coverage.
FEATURES
• 100% Digital PIR Detection, Excellent RF Immunity
• Two Self-Contained Relays, No Power Packs Needed
• IP65 Rated for Outdoor Applications
• No Minimum Load Requirements
• Compatible w/ Electronic & Magnetic Ballasts, CFLs, LED, & Incandescents
• Interchangeable Hot & Load Wires, Impossible to Wire Backwards
• Push-Button Programmable
•Non-Volatile Settings Memory
•Adjustable Time Delays
•Optional 0-10 VDC Dimming Output
•Convenient Test Mode
SBGR 10 2P
SBGR 10 2P OEX
Low Motion 360° Sensor
SPECIFICATIONS
Size:
3.40”H x 3.40”W x 1.40”D (8.64 cm x 8.64 cm x 3.56 cm)
Weight: 6 oz
Mounting:
2.65” (6.7 cm) square opening in fixture (minimum depth 1.50” (3.8 cm))
Maximum Load/Pole: (1 Phase Only) 800 W @ 120 VAC, 1200 W @ 277 VAC, 1500 W @
347 VAC
Motor Load: 1/4 HP
Frequency:50/60Hz
Dimming Load: Sinks <20 mA (0-10 VDC LED Drivers / Ballasts)
IP65 Rated, ROHS Compliant, Title 24 Component
Warranty
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
C
ORDERING INFORMATION
SBGR 10 2P
Series
SBGR 10 2P Low Mount 360° Sensor
US LISTED
Example: SBGR 10 2P DZ WH
PIR Detection Type
[blank] Indoor PIR
OEX
Outdoor PIR
Photocell
[blank] None
P
Inhibit Photocell
DZ
Dual Zone Photocell
Voltage
[blank] 120-277VAC
(MVOLT)
HVOLT 347-480VAC
Color
WH
BK
Low Temp/ Humidity
White
Black
[blank] Standard
LT
Low Temp
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 02/02/16
1 of 2
COVERAGE PATTERN
LOW MOUNT 360º LENS
•Best choice for large motion detection (e.g. walking).
•Viewing angle of 67º in a 360º conical shaped pattern.
•Provides 28 ft (8.53 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling.
•7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft (4.88 to 10.97 m) radial coverage.
*At 9ft Mtg.
TOP VIEW
SIDE VIEW
0 ft
9
0m
2.7
8.5
6.4
4.3
2.1
0m
2.1
4.3
6.4
8.5
28
21
14
7
0 ft
7
14
21
28
8.5
28
4.3
14
0m
0 ft
4.3
14
8.5
28
A: When walking across beam,
detection will occur at approximately 28 ft
B: When walking into beam,
detection will occur at approximately 24 ft
WIRING (DO NOT WIRE HOT)
STANDARD WIRING
BLACK* - Line Input 1
BLACK* - Load Output 1
BLUE** - Line Input 2
BLUE** - Load Output 2
WHITE - Neutral
}
}
*BLACK wires can be reversed
*BLUE wires can be reversed
N
120 OR
277 VAC
LOAD
H
H
BLU
BLK
BLU
BLK
120 OR
277 VAC
N
SWITCH
LOAD
WHT
347 VAC OPTION (347)
Black wires are replaced w/ Red wires
INITIAL POWER UP
The sensor’s relays are shipped in a latched closed position so the lights will come on upon initial power-up. If the lights do not
immediately turn on (initial installation only) the latching relays opened during shipment and will close within 30 secs.
Note: If the sensor loses power, the internal relays will latch to on.
INSTALLATION
•The SBGR Series offers a custom look for recess mounting in lighting fixtures. It
mounts inside a 2.65” (6.7 cm) square opening in a fixture (minimum depth 1.50”
(3.8 cm)). A #6 screw with a max head height of .130 inches is recommended.
•A label kit is included to mask off half of the sensor’s coverage pattern for end of aisle,
or trim the side viewing to create a rectangular pattern for center of aisle.
CENTER OF AISLE
END OF AISLE
PUSH BUTTON
SBGR 10 2P (OEX) - TS-SBR-026A
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 02/02/16
2 of 2