Commonwealth
of Australia
No.TC16/25, Wednesday, 6 July 2016
Published by the Commonwealth of Australia
Gazette
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCO Application Reworded....................................................................................... 8
TCO Applications Refused ........................................................................................ 9
TCOs Made................................................................................................................ 10
Comptroller General Initiated - Intention to Revoke Cancelled........................... 11
AAT Review of TCO Application Notification ........................................................ 12
Intention to Revoke TCOs not used in over 2 years ............................................. 13
Cheese Quota Allocation ......................................................................................... 17
The Commonwealth of Australia Tariff Concessions Gazette (the Tariff
Concessions Gazette) is free of charge on the DIBP internet site at:
http://www.border.gov.au
The Tariff Concessions Administration Section is located at
5 Constitution Ave Canberra City 2601
Contact numbers are listed below:
General Email Inquiries……………………………[email protected]
General Inquiries: ..............................................................(02) 6229 3567
TAPIN help desk .................................................................(02) 6275 6534
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2016
2
TCO Applications
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at
http://www.border.gov.au/Forms/Documents/b444.pdf
For guidance on the required description style, phone (02) 6229 3567
THE TABLE
Description of Goods including the
Customs Tariff Classification
3402.90.00
SURFACTANTS, polymer-free, in liquid form, having a
basis of fatty acid amidoalkyl betaine AND isopropanol
Op. 08.06.16
Schedule 4 Item Number
General Duty Rate
50
- TC 1620063
Stated Use:
To reduce surface tension by increasing viscosity of fluid for
stimulation and fracturing proppant transport
3816.00.00
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
5%
CONCRETE, REFRACTORY, including ALL of the following:
(a) aluminium oxide content NOT less than 86% and NOT greater
than 90%;
(b) silicon dioxide content NOT greater than 1.5%;
(c) iron oxide content NOT greater than 1%;
(d) chromium (III) oxide content NOT less than 9% and NOT
greater than 11%
Op. 10.06.16
50
- TC 1620393
Stated Use:
To line furnace and equipment as part of a sulphuric acid
manufacturing plant
3906.10.00
Applicant: NYRSTAR PORT PIRIE PTY LTD
5%
POLYMETHYLMETHACRYLATE (PMMA), in powder OR bead form, with OR
without adipic acid, having a mean particle diameter NOT greater
than 160 microns
Op. 31.05.16
50
- TC 1619550
Stated Use:
As glass interleavant to protect the glass during transport and
storage
Applicant: CSR BUILDING PRODUCTS LTD
5%
3
TCO Applications
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Description of Goods including the
Customs Tariff Classification
3921.90.90
SHEETS, polyisobutylene, embedded aluminium mesh, having ALL of
the following:
(a) synthetic rubber backing;
(b) adhesive fixing strips;
(c) high density polyethylene(HDPE) foil layer;
(d) colouring pigment;
(e) ultra-violet stabilising additive
Op. 07.06.16
Schedule 4 Item Number
General Duty Rate
50
- TC 1619914
Stated Use:
To protect roofs and prevent leakage
4016.99.00
Applicant: COMBINED GROUP OF COMPANIES PTY LTD
5%
MACHINE MOUNTS, vibration dampening, metal AND rubber, having
BOTH of the following;
(a) 2 hole flanged metal mounting base;
(b) metal plate with a single internal threaded connection
Op. 10.06.16
50
- TC 1620390
Stated Use:
Absorbs vibration of pumps once connected to them
6902.10.00
Applicant: ALLIED PUMPS PTY LTD
5%
BRICKS, REFRACTORY including ALL of the following:
(a) magnesium oxide content NOT less than 53% and NOT greater
than 63%;
(b) chromium (III) oxide content NOT less than 17% and NOT
greater than 24%;
(c) aluminium oxide content NOT less than 5% and NOT greater
than 9%;
(d) iron oxide content NOT less than 10% and NOT greater than
14%;
(e) calcium oxide content NOT greater than 1.5%;
(f) silicon dioxide content NOT greater than 2.5%
Op. 10.06.16
50
- TC 1620392
Stated Use:
To line furnace and equipment as part of a sulphuric acid
manufacturing plant
6902.20.00
Applicant: NYRSTAR PORT PIRIE PTY LTD
5%
BRICKS, REFRACTORY including ALL of the following:
(a) silicon dioxide content NOT less than 48% and NOT greater
than 56%;
(b) aluminium oxide content NOT less than 39% and NOT greater
than 47%;
(c) iron oxide content NOT greater than 2.5%;
(d) titanium dioxide content NOT greater than 2%
Op. 10.06.16
50
- TC 1620391
Stated Use:
To line a furnace and equipment as part of a sulphuric acid
manufacturing plant
Applicant: NYRSTAR PORT PIRIE PTY LTD
5%
4
TCO Applications
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Description of Goods including the
Customs Tariff Classification
7326.90.90
FITTINGS, SAFETY HARNESS, stainless steel, being ANY of the
following:
(a) tensioners;
(b) brackets;
(c) anchors;
(d) fixing plates;
(e) base plates;
(f) shuttles;
(g) toggles;
(h) joiners;
(i) energy absorbing connectors;
(j) variable height AND distance brackets;
(k) buckles;
(l) connection adjusters;
(m) O-rings;
(n) spigots
Op. 31.05.16
Schedule 4 Item Number
General Duty Rate
50
- TC 1619553
Stated Use:
To ensure the safety of people in situations involving
potentially dangerous high working environments
7616.99.00
Applicant: 3M AUSTRALIA PTY LTD
5%
FITTINGS, SAFETY HARNESS, aluminium, being ANY of the following:
(a) spigots;
(b) carriage connectors;
(c) baseplates;
(d) energy absorbing connectors;
(e) buckles;
(f) connection adjusters;
(g) O-rings;
(h) tamper proof stoppers;
(i) end anchors;
(j) rigging plates
Op. 31.05.16
50
- TC 1619765
Stated Use:
To ensure the safety of people in situations involving
potentially dangerous high working environments
8418.50.00
Applicant: 3M AUSTRALIA PTY LTD
5%
REFRIGERATORS, FOOD COOLING AND DRYING, having ALL of the
following:
(a) air disinfector AND activated carbon air filter;
(b) temperature control working capacity NOT less than
0 degrees Celsius and NOT greater than +25 degrees Celsius;
(c) humidity control working capacity NOT less than 60% and NOT
greater than 90%
Op. 08.06.16
50
- TC 1620062
Stated Use:
For the cooling, maturing and drying of food such as meat and
cheeses
Applicant: Viking Food Solutions
5%
5
TCO Applications
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Description of Goods including the
Customs Tariff Classification
8419.50.90
HEAT EXCHANGERS, GAS AND OIL, finned tube, having ALL of the
following:
(a) electric cooling fans;
(b) NOT less than 74 tubes per tube bundle on gas side;
(c) NOT less than 230 tubes per tube bundle on oil side;
(d) tube bundle size NOT less than 13 300 mm in length;
(e) operating temperature NOT less than 120 degrees C;
(f) operating pressure NOT less than 2 800 kPa;
(g) heat transfer rate of finned tube NOT less than 18.7 W/m2K
on gas side;
(h) heat transfer rate of finned tube NOT less than 11.86
W/m2K on oil side
Op. 02.06.16
Schedule 4 Item Number
General Duty Rate
50
- TC 1619704
Stated Use:
Cool oil and gas by transferring heat to the air
8428.10.00
Applicant: QGC PTY LTD
5%
PALLET LIFTS, including ALL of the following:
(a) four mast lift assembly;
(b) roller conveyor lifter;
(c) work station balustrade;
(d) load capacity NOT greater than 1 600 kg
Op. 01.06.16
50
- TC 1619644
Stated Use:
For de-palletising goods in an automated warehouse
8477.40.00
Applicant: VANDERLANDE INDUSTRIES AUSTRALIA PTY LTD
5%
VACUUM FORMING MACHINES, programmable logic controlled,
including ALL of the following:
(a) forming area NOT greater than 2 800 mm X 1 800 mm;
(b) forming area height NOT greater than 1 600 mm;
(c) vacuum vessel;
(d) top AND bottom heaters;
(e) sheet loader;
(f) servomotor driven table AND clamp
Op. 03.06.16
50
- TC 1619838
Stated Use:
During the manufacture of plastic products
8479.82.00
Applicant: COMTECH INDUSTRIES PTY LTD
5%
SIEVING STATION, METAL POWDER, including ALL of the following:
(a) powder containers AND/OR tanks AND/OR bottles;
(b) conveyor lines AND/OR vacuum pump;
(c) gas adjustment valve AND/OR switch;
(d) ultrasonic vibrating sieve
Op. 23.05.16
50
- TC 1618740
Stated Use:
To sieve and separate coarse particles from fine metal powders
in laser printing systems
8479.82.00
Applicant: RAYMAX APPLICATIONS PTY LTD
5%
DRY AND/OR LIQUID CHEMICAL MIXING MACHINES, programmable logic
controlled, having ALL of the following:
(a) maximum volume capacity NOT less than 250 L;
(b) maximum ingredient viscosity NOT less than 20 000 cps;
(c) maximum mixing speed NOT less than 140 RPM
Op. 08.06.16
50
- TC 1620061
Stated Use:
For high speed mixing of dry and/or liquid chemicals
Applicant: DYWIDAG-SYSTEMS INTERNATIONAL PTY LTD
5%
6
TCO Applications
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Description of Goods including the
Customs Tariff Classification
8479.89.90
WORKING STATION, SELECTIVE LASER MELTING (SLM) SYSTEM, including
ALL of the following:
(a) hood OR cover;
(b) access gloves;
(c) control panel;
(d) build cylinder;
(e) foot switch AND/OR platform height adjustment mechanism;
(f) gas adjustment valve AND/OR switch;
(g) powder containers AND/OR tanks AND/OR bottles
Op. 24.05.16
Schedule 4 Item Number
General Duty Rate
50
- TC 1618741
Stated Use:
For cleaning and extraction of 3-D printed parts
8479.89.90
Applicant: RAYMAX APPLICATIONS PTY LTD
5%
PHARMACEUTICAL MONITORING AND SECURING AND DISPENSING SYSTEM,
whether OR not mobile, whether OR not assembled, including ALL
of the following:
(a) terminal;
(b) barcode scanner;
(c) drawers AND/OR system locked drawers;
(d) biometric access control
whether OR not including ANY one OR more of the following:
(i) uninterruptable power supply;
(ii) universal serial bus (USB) charging connection;
(iii) thermal printer;
(iv) support arm;
(v) bins AND/OR boxes AND/OR pockets;
(vi) keyboard
Op. 27.05.16
50
- TC 1619352
Stated Use:
Goods are utilised to monitor, store and dispense patient
medication
8479.89.90
Applicant: CAREFUSION AUSTRALIA 316 PTY LTD
5%
HOPPERS, including screw feeders, capacity NOT less than 5
cubic metres and NOT greater than 50 cubic metres
Op. 03.06.16
50
- TC 1619837
Stated Use:
Containment and feeding of waste for further processing in a
energy plant
Applicant: AQUATEC MAXCON PTY LTD
5%
7
TCO Applications
Description of Goods including the
Customs Tariff Classification
8507.80.00
BATTERY ENERGY STORAGE SYSTEM, assembled AND/OR unassembled,
having ALL the following:
(a) charge AND temperature controls;
(b) stored energy monitor;
(c) dry weight greater than 3 450 kg;
(d) width greater than 2.1 m;
(e) length greater than 4.4 m;
(f) vanadium electrolyte storage tanks;
(g) power capacity NOT less than 8 kW peak and NOT greater
than 250 kW peak;
(h) stored energy capacity NOT less than 40 kWh and NOT
greater than 1 600 kWh,
with OR without ANY of the following:
(i) steps;
(ii) platforms;
(iii) fans;
(iv) electrolyte fluid
Op. 07.06.16
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Schedule 4 Item Number
General Duty Rate
50
- TC 1619858
Stated Use:
To facilitate off grid electricity supplies using solar and
wind energy or work in conjunction with on grid electricity
supplies
5%
Applicant: AUSTRALIAN VANADIUM LTD
8516.79.00
FOOD AND PLATE WARMING DRAWERS, electric, including ALL of the
following:
(a) plate capacity NOT less than 14;
(b) telescopic draw runner;
(c) temperature range NOT greater than 80 C
Op. 02.06.16
50
- TC 1619707
Stated Use:
Warming food and plates
Applicant: V-ZUG AUSTRALIA PTY LTD
5%
8
TCO Application Reworded
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
TCO Application R ewor ded
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN OBJECTION
SUBMISSION
Amended description has been proposed for the Tariff Concession Order application shown in the following
TABLE.
Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be
amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14
days after the publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3920.20.00
FILM, PRINTING, polypropylene, multi-layered, having shrinkage
in the machine direction NOT less than 10% and NOT greater than
19%
Op. 02.03.16
Stated Use:
Manufacturing of labels
Applicant: LM GROUP (AUST) PTY LTD
Schedule 4 Item Number
50
- TC 1608743
9
TCO Applications Refused
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
TCO Applications R efus ed
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8428.90.00
8708.70.91
SELECTING AND SORTING AND STACKING AND RETRIEVAL MACHINES,
TIMBER, programmable logic controlled, having ALL of the
following:
(a) guiding rails;
(b) timber handling vacuum lifters;
(c) laser scanning;
(d) automated stacking;
(e) electric controls
Op. 06.01.16
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Robotic Automation Pty Ltd, Newington, NSW
WHEELS, PASSENGER MOTOR VEHICLE, alloy, finished without wheel
stud holes
Op. 02.02.16
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Arrowcrest Group Pty Ltd T/A ROH Automotive,
Woodville North, SA and Dragway Performance Engineering,
Kinglake West, Vic
Schedule 4 Item Number
50
- TC 1600939
50
- TC 1604326
10 TCOs Made
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the
Customs Tariff Classification
7228.30.10
8302.49.00
8422.19.00
8430.49.00
8481.30.00
8481.40.00
Schedule 4 Item Number
Last Date of Effect
General Duty Rate
BARS, STEEL, HIGH ALLOY, hot rolled, round, having BOTH the
following:
(a) sulphur content NOT exceeding 0.005%;
(b) phosphorus content NOT exceeding 0.010%
Op. 04.04.16
Dec. date 04.07.16
- TC 1612306
CLIPS, SINK MOUNTING, including a clip screw
Op. 04.04.16
Dec. date 04.07.16
- TC 1612314
KITCHENWARE AND/OR TABLEWARE WASHING MACHINES, under counter OR
pass through OR front loading OR rack conveying, one OR two OR
four cycle, having ALL of the following:
(a) rack chamber height NOT less than 205 mm and NOT greater
than 800 mm;
(b) rack sizes NOT less than 400 mm x 400 mm and NOT greater
than 1 320 mm x 700 mm;
(c) width NOT less than 460 mm and NOT greater than 1 750 mm;
(d) depth NOT less than 520 mm and NOT greater than 1 600 mm;
(e) height NOT less than 700 mm and NOT greater than 1 930 mm
Op. 06.04.16
Dec. date 04.07.16
TORQUE DRIVES, DOWNHOLE MILLING TOOLS, OIL AND/OR GAS WELL,
including ALL of the following:
(a) compensator;
(b) motor;
(c) transmission
Op. 04.04.16
Dec. date 04.07.16
CHECK VALVES, conforming to ASME/ANSI B16.34:2013, including ALL
of the following:
(a) working pressure class 1 690;
(b) valve body AND bonnet consisting of EITHER the following:
(i) ASTM A182 forged grade F316 stainless steel;
(ii) ASTM A182 forged grade F22 alloy steel,
(c) valve size OR nominal diameter (DN) 15 OR 80
Op. 15.03.16
Dec. date 04.07.16
VALVES, SAFETY OR RELIEF, steam, manual OR electric operation,
conforming to ASME/ANSI B16.34:2013, including ALL of the
following:
(a) working pressure class 300 OR 1 500;
(b) valve body AND bonnet consisting of EITHER of the
following:
(i) ASTM A217 grade WC6 alloy steel;
(ii) ASTM A217 grade WC9 alloy steel,
(c) inlet nominal diameter 50 OR 65
Op. 15.03.16
Dec. date 04.07.16
50
50
50
- TC 1612840
50
- TC 1612348
50
- TC 1610534
50
- TC 1610535
11 TCOs Made and
Comptroller-General Initiated - Intention to Revoke Cancelled
Description of Goods including the
Customs Tariff Classification
8514.10.00
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Schedule 4 Item Number
Last Date of Effect
General Duty Rate
VACUUM BRAZING FURNACE, programmable logic controlled, having
ALL of the following:
(a) manual forklift loader;
(b) loading trays;
(c) loading baskets;
(d) nitrogen buffer tank;
(e) total heating power NOT less than 180 kW;
(f) dual wall furnace vessel with stainless steel heating
chamber;
(g) oven dimensions NOT less than 900 mm x 700 mm x 1 200 mm
Op. 05.04.16
Dec. date 04.07.16
50
- TC 1612566
Comptroller General Initi ated - Intention to Revoke C ancell ed
CUSTOMS ACT 1901
CANCELLATION OF THE INTENTION TO REVOKE
The intention to revoke the Tariff Concession Order for goods described in the following TABLE has been
cancelled.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3808.93.00
HERBICIDES, GROWTH REGULATOR, having a basis of trinexapac
Op. 14.07.08
Dec. date 03.10.08
Schedule 4 Item Number
50
- TC 0818097
12 AAT Review of TCO Application Notification
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
AAT Revi ew of TCO Applic ation N oti fication
NOTICE OF APPLICATIONS FOR REVIEW OF DECISIONS MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS TRIBUNAL ACT
1975
An application has been lodged with the Administrative Appeals Tribunal under section 29 of the Administrative
Appeals Tribunal Act 1975 for a review of the decision of the Immigration and Border Protection in respect of
the Tariff Concession Order for the goods described in the following TABLE.
The operative date (Op.) and TC reference number follow the description of goods.
The decision to be reviewed by the Administrative Appeals Tribunal is nominated following the description of
goods.
Subject to the Administrative Appeals Tribunal Act 1975, any person whose interests are affected by the
decision under review may apply in writing to the Tribunal to be made a party to the proceedings. Interested
persons who do become a party to these proceedings may be able to present evidence and make submissions to the
Tribunal and the matter could not be settled by consent without their agreement. The Administrative Appeals
Tribunal reference number and location appear against the Tariff Concession.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8428.90.00
FOODSTUFF BAG HANDLING LINE, programmable logic controlled,
including ALL of the following:
(a) bag placement four axis robot;
(b) mechanical AND/OR vacuum gripper;
(c) servo driven conveyor, incorporating encoded variable
speed controls;
(d) bag top AND/OR sides flattener;
(e) bag blower;
(f) bag positioning sensor;
(g) maximum operating speed NOT less than 240 bags per minute
Op. 28.08.15
Comptroller-General of Customs Decision: REFUSE
Applicant
Metro Motion Pty Ltd
Under ss.269SHA(3), an application by a person affected by the
decision of the Comptroller-General of Customs in respect of this
TCO may apply (under ss.30(1A) of the Administrative Appeals
Tribunal Act 1975) to become a party joined to the proceedings
provided such application is made within 60 days of the date of
this notice
Schedule 4 Item Number
50
- TC 1533103
AAT Ref
AAT Location
V2016 3081
MELBOURNE
13 Intention to Revoke TCOs not used in over 2 years
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Intention to Revoke TC Os not us ed i n over 2 years
COMMERCIAL TARIFF CONCESSION ORDERS (CTCOs) & TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that the CTCOs and TCOs listed in the table below are no
longer required because, in the 2 years preceding the day of this notice, they have not been quoted in an
import declaration to secure a concessional rate of duty.
From Thursday, 04 August 2016, it is intended to take action to revoke these Orders under subsection 269SD
(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in transit
provisions shall apply. If revoked, the expected date of effect will be 03 August 2016.
Interested parties are invited to provide, by close of business, Wednesday 03 August 2016, written reasons why
an Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
Contact: Email [email protected], phone 02 6275 6475
THE TABLE
______________________________________________________________________________________________________________
Tariff
Description
Concession Number
Classification
______________________________________________________________________________________________________________
3901.30
ETHYLENE VINYL ACETATE COPOLYMER, with vinyl acetate content
between 10.7% - 13.3% (both inclusive), and melt flow index
between 2-3 g/10 min (both inclusive)
Op. 24.03.92
Dec. date 18.06.92
- TC 9203509
3901.30.00
ETHYLENE VINYL ACETATE CO-POLYMER, having a vinyl acetate content
within the range 25.5% - 29.5% (both inclusive) and a melt flow
index within the range 5.7 to 8.3 g/10min (both inclusive)
Op. 23.04.93
Dec. date 30.07.93
- TC 9305381
3901.30.00
ETHYLENE VINYL ACETATE COPOLYMER, in solid form, (granules) having
ALL of the following:
(a) vinyl acetate content of NOT less than 8% and NOT exceeding
10%;
(b) a melt flow rate of NOT less than 0.5 and NOT exceeding 2 g/10
min calculated in accordance with ISO 1133 test method
Op. 19.08.93
Dec. date 26.11.93
- TC 9307492
3909.50.10
AROMATIC POLYESTER URETHANE ACRYLIC COPOLYMER DISPERSION, having a
solids content between 32 and 34 per cent by weight and a monomer
ratio of urethane to acrylic being 1:1
Op. 29.01.93
Dec. date 30.04.93
- TC 9308123
3917.29
TUBES, vulcanised fibre
Op. 09.04.92
Dec. date 26.06.92
- TC 9203860
3917.39.90
HOSE,
(a)
(b)
(c)
(d)
sewer, thermoplastic, having ALL of the following:
NOT less than 150 metres in length;
maximum working pressure 138 BAR;
minimum burst pressure 344 BAR;
inner tube of polyolefin with single high tensile polyester
braid reinforcement and outer of polyether-urethane;
(e) bending radius of 150 mm;
(f) weighing 0.59 kg per metre or less
Op. 22.09.93
Dec. date 07.01.94
- TC 9310291
3919.10.00
MASKING TAPE, adhesive polyvinyl chloride, lithographic, opaque to
actinic light, transparent to optical light in widths from 6 mm to
25 mm
Op. 12.01.93
Dec. date 16.04.93
- TC 9300960
3919.90
POLYPROPYLENE PLANAR FORMS, in rolls, monoaxially oriented,
tensilized, having ALL of the following:
14 Intention to Revoke TCOs not used in over 2 years
(a) film thickness exceeding 0.070 mm;
(b) tensile strength in excess of 650N/25 mm;
(c) adhesion in excess of 9N/25 mm;
(d) width in excess of 1 220 mm;
(e) length in excess of 1 500 m
Op. 01.06.92
Dec. date 01.10.92
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
- TC 9205117
3919.90.00
STYRENE BACKING MATERIAL, lampshade, pressure sensitive adhesive
coated, with release paper and in rolls with a width exceeding
1200mm
Op. 31.08.94
Dec. date 09.12.94
- TC 9407307
3919.90.00
STRIPS, FILING, self adhesive, with pre-punched holes
Op. 07.08.95
Dec. date 03.11.95
- TC 9509467
3920.20.00
POLYPROPYLENE FILM, in rolls, having a pigment layer on one side
with BOTH of the following:
(a) colour yellow, cyan, magenta or black;
(b) with binders consisting predominantly of all of ethylenevinyl acetate copolymer, nitrocellulose and polyethylene
Op. 02.07.93
Dec. date 08.10.93
- TC 9304771
3920.30.00
BIAXIALLY ORIENTED POLYSTYRENE FILM 23, 25, 30 and 50 micron
Op. 18.04.94
Dec. date 22.07.94
- TC 9404185
3920.62.00
POLYETHYLENE TEREPHTHALATE FILM, having ALL of the following:
(a) polyvinylidene chloride coating;
(b) polyethylene backing;
(c) width NOT greater than 350 mm
Op. 17.03.09
Dec. date 29.05.09
- TC 0909027
3920.62.00
STRAP, polyester, of a width ranging from 8.62 mm to 12.7 mm (both
inclusive), thickness ranging from 0.45 mm to 0.73 mm (both
inclusive), breakstrength ranging from 1.780 kN to 3.700 kN (both
inclusive) and elongation ranging from 5% to 25% (both inclusive)
Op. 23.11.93
Dec. date 11.03.94
- TC 9313336
3920.69.00
POLYESTER SCRIM, LAID AND BONDED, thermoplastic-coated yarn,
having BOTH of the following:
(a) NOT greater than 2 x 2 yarns/cm;
(b) weight NOT greater than 12 gsm (yarn plus coating)
Op. 16.09.05
Dec. date 05.12.05
- TC 0512088
3920.99.00
MEMBRANE FILM, TWO LAYER, BREATHABLE, having BOTH of the
following:
(a) NOT less than 55% polytetrafluoroethylene
(PTFE);
(b) thickness NOT less than 30 microns and NOT greater
than 40 microns
Op. 20.06.08
Dec. date 08.09.08
- TC 0813995
FILM, THERMOPLASTIC, polyphenylene sulphide (PPS)
Op. 26.05.98
Dec. date 31.07.98
- TC 9804430
3920.99.00
3921.12.00
POLYVINYL CHLORIDE (PVC) FOAM, rigid planar form, NOT further worked
than trimmed or cut to a rectanglar shape having a thickness NOT
less than 40 mm
Op. 21.01.98
Dec. date 22.06.98
- TC 9805319
3921.90.90
SHEETS, VEHICLE HEADLINER SUBSTRATE, consisting of glass fibre
polypropylene core and having ALL of the following:
(a) scrim fabric;
(b) barrier film;
(c) adhesive film
Op. 22.03.10
Dec. date 11.06.10
- TC 1014113
3921.90.90
PANELS, being laminates, having BOTH of the following:
(a) acrylic polyurethane resin outer;
(b) flame retardant fibrous core
Op. 25.05.11
Dec. date 22.08.11
- TC 1116443
3921.90.90
TAPES, garment seam sealing, with a carrier layer of polyurethane
elastomer, and a heat seal adhesive coating
Op. 30.03.93
Dec. date 13.07.93
- TC 9308986
3923.10.00
BOXES, ISOTHERMAL, having ALL of the following:
(a) rigid polyurethane and polyisocyanurate foam construction;
15 Intention to Revoke TCOs not used in over 2 years
(b) faced with aluminium foil and backed with paper;
(c) cardboard packaging having ALL of the following:
(i) double grooved cardboard;
(ii) rigid cooling element trays;
(iii) gel packs
Op. 06.03.07
Dec. date 06.07.07
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
- TC 0703580
3924.10.00
TABLEWARE AND/OR KITCHENWARE, being plastic onion storers,
incorporating a rubber strap
Op. 02.09.11
Dec. date 28.11.11
- TC 1130498
3924.90.00
STORAGE ORGANISERS, SHOE, plastic, with lid, having BOTH of the
following:
(a) NOT less than five dividers
(b) overall length NOT greater than 850 cm
Op. 06.10.11
Dec. date 04.01.12
- TC 1133805
3925.20.00
WINDOWS, AQUARIUM, polymethyl methacrylate, transparent
Op. 30.08.06
Dec. date 17.11.06
- TC 0616334
CURTAIN SUPPORT FRAME/GUIDES, cornice, valance
Op. 09.06.93
Dec. date 24.09.93
- TC 9304416
HANDLE ASSEMBLIES, having ALL of the following:
(a) bakelite handle;
(b) aluminium heat shield;
(c) aluminium stud
Op. 19.01.01
Dec. date 30.03.01
- TC 0100582
CYLINDERS, COMPRESSED NATURAL GAS, MOTOR VEHICLE
Op. 23.06.06
Dec. date 15.09.06
- TC 0610758
UROSTOMY APPLIANCES, being ANY of the following:
(a) condom inserts;
(b) thumb clamps;
(c) tubing connectors;
(d) adaptors;
(e) fistula vaginal urine collectors
Op. 01.01.07
Dec. date 07.11.06
- TC 0614754
FRICTION REDUCERS, OIL AND GAS WELL, comprising ALL
of the following:
(a) protectors;
(b) pipe sleeves;
(c) clamps
Op. 11.04.08
Dec. date 04.07.08
- TC 0803243
GEL NAILS KIT, comprising ALL of the following:
(a) glue;
(b) gel overlay;
(c) gel activator;
(d) gel brush cleaner;
(e) gel tip bender;
(f) nail shaper;
(g) cuticle pusher;
(h) artificial nail tips;
(i) nail brush
Op. 22.10.09
Dec. date 04.01.10
- TC 0939743
HANDLE ASSEMBLIES, having ALL of the following:
(a) bakelite handle;
(b) aluminium heat shield;
(c) aluminium stud
Op. 19.01.01
Dec. date 30.03.01
- TC 0100582
3925.90.00
3926.90.90
3926.90.90
3926.90.90
3926.90.90
3926.90.90
3926.90.90
3926.90.90
REARVIEW MIRRORS, swivelling, having ALL of the following
characteristics:
(a) suction cap to allow mirror to be attached to the vehicle’s
windscreen;
(b) convex mirror element of reflective plastic film or similar
but not of glass;
(c) mirrored surface not exceeding 12cm x 6cm
Op. 18.06.93
Dec. date 24.09.93
- TC 9304577
16 Intention to Revoke TCOs not used in over 2 years
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
3926.90.90
CONES, squeezing, with friction retaining collar and spiral flutes,
having dimensions as follows:
(a) length 327 mm +/- 5%;
(b) maximum diameter 83 mm +/- 10%
Op. 28.10.93
Dec. date 04.02.94
- TC 9312628
3926.90.90
FONTS, religious, holy water
Op. 07.06.94
Dec. date 09.09.94
- TC 9405042
3926.90.90
CO-POLYMER LAMINATES:
(a) made from variable ratios of polyester and polyethelene
resins;
(b) bonded with heat activated coatings specifically made to
adhere to printed, photographic and instant photographic
materials;
(c) in sheet form or multiple layers (pouches);
(d) with hologram and/or UV-printing;
(e) with or without over printed with magnetic strip or
infra-red security materials;
(f) thickness 100 micron and over
Op. 28.09.94
Dec. date 01.02.95
- TC 9407885
3926.90.90
SEALS, ROD AND PISTON, polymer, fluoroelastomer OR teflon
fluoroelastomer, having ALL of the following:
(a) molybdenum disulfide impregnated;
(b) 122 cm max diam;
(c) hardness 85 shore A OR 95 shore A;
(d) capable of operating up to 103,000 KPa
Op. 28.12.95
Dec. date 21.05.96
3926.90.90
- TC 9600969
FLOORING PANELS, POLYPROPYLENE having ALL of the following:
(a) 600 mm width;
(b) 900 mm length;
(c) 25 mm - 35 mm thickness (both inclusive);
(d) slot opening
Op. 12.01.96
Dec. date 19.04.96
- TC 9601570
17 Cheese Quota Allocation
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
Chees e Quota Alloc ati on
TARIFF QUOTAS – CHEESE AND CURD QUOTA ALLOCATIONS - TARIFF QUOTA HOLDERS 01 JULY 2016 TO 30 JULY 2017
GENERAL INFORMATION
This Gazette contains a table in Part 1 specifying details of quota categories relevant to quota entitlements
outlined in Part 2.
Enquiries concerning any information published within this Gazette should be directed to Tariff Concession
Administration, Customs Compliance Branch, Australian Border Force, 5 Constitution Avenue, City, ACT, 2601.
PART 1
NOTICE OF MAKING A DETERMINATION UNDER PART XVI OF THE CUSTOMS ACT (1901)
In pursuance of Section 273B of the Customs Act (1901), notice is hereby given that Determination Number
1,000,743 was made in relation to Item 55 in Part III of Schedule 4 to the Customs Tariff Act (1995), and
subject to any conditions set out hereunder, that Determination applies to goods that are:
(1) specified in the Table hereunder;
(2) classified under a subheading of Schedule 3 to the Customs Tariff Act (1995), specified in Item 55 in
Part III of Schedule 4 to the Customs Tariff Act (1995);
(3) entered for home consumption not earlier than 01 July 2016 and not later than 30 June 2017 by the
person specified in that Determination, as shown in Part 2; and
(4) in total, not in excess of such quantity or such value as is specified in that Determination, as shown
in Part 2.
Condition
The application of item 55 in Part III of Schedule 4 to the Customs Tariff Act 1995 is subject to the
condition that the Treatment Code that identifies item 55 is included in the entry for home consumption at the
time at which the goods to which item 55 applies (as set out in this determination) are entered for home
consumption.
THE TABLE - BASE QUOTA ALLOCATIONS - CATEGORY INFORMATION
QUOTA
CATEGORY
QUOTA
CEILING
QUANTITY
(KG)
ALLOCATED
FINAL
FACTOR
%
NUMBER
OF QUOTA
HOLDERS
UNIT
QUANTITY
QUOTA
ITEM
NUMBER
QUOTA
DESCRIPTION
311
11,500,000
11,500,000
0.504765
0671
39
Kilograms
61A
Cheese and Curd
PART 2
CAT
CODE
311
311
311
311
311
311
311
311
311
QUOTA HOLDERS LEGAL NAME
QUOTA HOLDERS ADDRESS
MR. A, E & F NASRALLA
ARQUILLA BULK TRADING CO PTY LTD
BON FOOD PTY LTD
CALENDAR CHEESE CO. PTY LTD
CAMPANIA OLIVE OIL CO. PTY LTD
CANTARELLA BROS PTY LTD
DCG ENTERPRISES PTY LTD
DEL RE NOMINEES PTY LTD
DELTA SALES PTY LTD
GREENVALE
CAMPERDOWN
NORTHLAND
PORT MELBOURNE
THOMASTOWN
SILVERWATER
KEMPS CREEK
DONCASTER EAST
BRUNSWICK
QUANTITY KG
VIC
NSW
VIC
VIC
VIC
NSW
NSW
VIC
VIC
3059
1450
3072
3207
3074
1811
2178
3109
3056
1,040
6,881
93,716
379,466
29,613
1,835,938
5,549
1,083,350
639,883
18 Cheese Quota Allocation
CAT
CODE
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
311
Commonwealth of Australia Gazette
No TC16/25, Wednesday, 06 Jul 2016
QUOTA HOLDERS LEGAL NAME
QUOTA HOLDERS ADDRESS
EUROPEAN FOODS WHOLESALERS PTY LTD
F. MAYER (IMPORTS) PTY LTD
FESTIVAL CITY WINES & SPIRITS PTY LTD
FULBECK PTY LTD
GAGANIS BROS. IMPORTED FOOD WHOLESALERS PTY LTD
GENOBILE BROTHERS FOOD DISTRIBUTORS PTY LTD
GLOBAL FOOD DISTRIBUTORS PTY LTD
GLOBAL FOODS GROUP PTY LTD
MR. OSCAR & DELIA HEIJO
JOHN KOTIS FAMILY SETTLEMENT
THE KAYA FAMILY TRUST AND THE TRACAS FAMILY TRUST
KEBIA IMPORTEX PTY LTD
KIRK FOOD ASSOCIATES PTY LTD
KORERO PTY LTD
L. DI SANTO PTY LTD
LEO'S IMPORTS AND DISTRIBUTORS PTY LTD
MANASSEN FOODS AUSTRALIA PTY LTD
MARCO POLO FOODS PTY LTD
MENORA GOURMET PRODUCTS UNIT TRUST
MONDE NISSIN (AUSTRALIA) PTY LTD
OMEGA FOODS UNIT TRUST
P. & T. BASILE PTY LTD
QUALITY CENTRE FOOD SERVICES PTY LTD
RODINI NOMINEES PTY LTD
SHUUMPA PTY LTD
THE TRUSTEE FOR CORECO AUST UNIT TRUST
THE TRUSTEE FOR THE CONGA TRUST
VISCO SELECTED FINE FOODS PTY LTD
WASHED RIND PTY LTD
ZINTIX PTY LTD
NORTHBRIDGE
MASCOT
ALBERT PARK
GUILDFORD
HINDMARSH
COBURG
SALISBURY SOUTH
SALISBURY
WARRAWONG
CLAYTON
BRUNSWICK
MARRICKVILLE
MASCOT
RIVERWOOD
CARLTON NORTH
CAMPBELLFIELD
WETHERILL PARK
CAMPSIE
SPRINGVALE
SPRINGVALE
HINDMARSH
BAYSWATER
AUBURN
CAMPBELLFIELD
FRENCH’S FORREST
SOMERTON
NORTHLAND CENTRE
HEMMENT
ADELAIDE
LIDCOMBE
QUANTITY KG
WA
NSW
SA
NSW
SA
VIC
SA
SA
NSW
VIC
VIC
NSW
NSW
NSW
VIC
VIC
NSW
NSW
VIC
VIC
SA
VIC
NSW
VIC
NSW
VIC
VIC
QLD
SA
NSW
6865
1460
5014
2161
5007
3058
5106
5106
2502
3168
3056
2204
1460
2210
3054
3061
2164
2194
3171
3171
5007
3153
2144
3061
2086
3062
3072
4178
5000
2141
123,514
1,465,737
10,837
47,242
149,684
47
1,912
688,745
1,221
827,801
16,948
766,930
14,209
64,479
924
49,983
1,519,291
16,238
11,183
12,557
9,767
321,840
69,805
46,518
1,232
19,325
1,095,474
4,080
346
66,695