HiTEMP COATINGS FOR HMA PLANT COMPONENTS WITH ELEVATED TEMPERATURES
Primers
860-HF
400°F Silicone Copolymer
860-HF is a single package silicone copolymer primer designed fir heat affected zones up to 400°F. It provides maximum adhesion and corrosion
protection even on limited surface preparation areas. It may be topcoated with a wide range of topcoats: Silicon alkyds, alkyds, urethanes, and
acrylics. "SPRAY-SAFE"
47-HF
450°F Hybrid Epoxy Novolac
47 Series is a 2-K Hybrid Epoxy Novolac specifically formulated to alleviate extensive surface preparation while providing excellent temperature
and chemical resistance.
48-HF
450°F Insulation
Epoxy Novolac
48 Series Hybrid Epoxy Novolac insulation primer is a high build 2-K product that provides insulation characteristics and exceptional heat
reduction properties. When applied at 12 mils DFT on 450°F surfaces, it can reduce surface temperatures up to 130°F. This primer offers
excellent chemical and corrosion protection and is a great choice for priming under insulation.
827-HB
1200°F Inert Multipolymeric
Matrix
827 Series is an unparalleled single package primer that is ideal for CUI services from -300°F up to 1200°F, or where extreme thermal shock
resistance is necessary. 827 offers high build properties and is very surface tolerant. With proper reduction, this coating may be hot applied to
surfaces up to 750°F.
Direct-To-Metal
47-HF
450°F Hybrid Epoxy Novolac
47 Series is a 2-K Hybrid Epoxy Novolac specifically formulated to alleviate extensive surface preparation while providing excellent temperature
and chemical resistance and is an excellent coating option to prevent corrosion under insulation for services ranging from -40°F up to 450°F.
79-LH
350°F Polyamide Adduct
Epoxy
79-LH is a Direct to Metal 2-K epoxy designed for intermittent surface temperatures to 350°F and continual temperatures to 300°F. It may be
applied up to 5 mils DFT for normal conditions and up to 10 mils DFT for baghouse interiors.
802
600°F Silicone Alkyd
802 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in gray. NOTE: This product
heat cures at 250°F.
812-LH
600°F Silicone Alkyd
812 series is a n economical high heat coating effective on steel surfaces up to 600°F and does not require a heat cure. Available in black and
#802 in gray.
807-LH
1200°F Silicone Copolymer
807 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in aluminum. NOTE: This
product heat cures at 250°F.
808-HF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in gray and #810 black. NOTE:
This product heat cures at 250°F.
810-HF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in black and #808 gray. NOTE:
This product heat cures at 250°F.
827-HB
1200°F Inert Multipolymeric
Matrix
827 Series is an unparalleled single package coating that is ideal for CUI services from -300°F up to 1200°F, or where extreme thermal shock
resistance is necessary. 827 offers high build properties and is very surface tolerant. With proper reduction, this coating may be hot applied up
to surfaces up to 750°F.
899-DF
1000°F Modified Silicone
Copolymer
899 is a single package DTM that may be applied up to 8 mils DFT in one coat, offering higher build protection and surface tolerance compared to
other high temperature coatings. 899 Provides superior thermal shock and corrosion protection in a wide range of colors.
Topcoats
802
600°F Silicone Alkyd
802 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in gray. NOTE: This product
heat cures at 250°F.
812-LH
600°F Silicone Alkyd
812 series is a n economical high heat coating effective on steel surfaces up to 600°F and does not require a heat cure. Available in black and
#802 in gray.
807-LH
1200°F Silicone Copolymer
807 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in aluminum. NOTE: This
product heat cures at 250°F.
808-HF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in gray and #810 black. NOTE:
This product heat cures at 250°F.
810-HF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in black and #808 gray. NOTE:
This product heat cures at 250°F.
899-DF
1000°F Modified Silicone
Copolymer
899 is a single package coating that may be applied up to 8 mils DFT in one coat, offering higher build protection compared to other coatings in
this temperature range. 899 is the topcoat of choice for the 827 Series, offering a wide range of standard and custom color options suitable for
services from 350°F up to 1000°F.
805-LH
1000°F Modified Silicone
Copolymer
805 Series is a single package coating available in a variety of colors. It offers excellent heat stability (thermal shock), corrosion resistance, color
purity, and ease of application. NOTE: This product heat cures at 250°F.
815-DF
500°F Acrylic Silicone
Copolymer
815 is an excellent topcoat option for components with service temperatures up to 500°F. This product does not require a heat cure and is
available in a full range of colors.
865-LH
400°F Modified Silicone
Copolymer
865-LH is a single package modified silicone topcoat originally designated for HMA plants. Due to the high silicone content, heat and light stable
pigmentation, 865-LH ,maintains exceptional gloss and color purity in rugged environments as well as when exposed to high temperatures.
"SPRAY-SAFE"
HiTEMP DRY-FALL COATINGS FOR HMA PLANT COMPONENTS WITH ELEVATED TEMPERATURES
Primers
15ZN-DF
1000°F Silicone Zinc
15 ZN Series 2-K Silicone Zinc Primer cathodically protects steel and is designed for heat affected zones up to 1000°F. NOTE: This product heat
cures at 250°F. "SPRAY-SAFE"
830
400°F Silicone Copolymer
Alkyd
830 Series is a single package modified silicone copolymer primer designed for heat affected zones up to 400°F. The dry-Fall properties of 830
Series allow it to dry to a powder within 10-20 feet from the point of application eliminating paint overspray damage. It may be topcoated with a
wide range of topcoats: Silicon alkyds, alkyds, urethanes, and acrylics. "SPRAY-SAFE"
827-HB
1200°F Inert Multipolymeric
Matrix
827 Series is an unparalleled single package primer that is ideal for CUI services from -300°F up to 1200°F, or where extreme thermal shock
resistance is necessary. 827 offers high build properties and is very surface tolerant, all in a dry-fall "SPRAY-SAFE" formula.
Direct-To-Metal
899-DF
1000°F Modified Silicone
Copolymer
899 is a single package DTM that may be applied up to 8 mils DFT in one coat, offering higher build protection and surface tolerance compared to
other high temperature coatings. 899 Provides superior thermal shock and corrosion protection in a wide range of colors. "SPRAY-SAFE"
807-DF
1200°F Silicone Copolymer
807 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in aluminum. NOTE: This
product heat cures at 250°F. "SPRAY-SAFE"
808-DF
1200°F Silicone Copolymer
807 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in aluminum. NOTE: This
product heat cures at 250°F. "SPRAY-SAFE"
810-DF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in black and #808 gray. NOTE:
This product heat cures at 250°F. "SPRAY-SAFE"
827-HB
1200°F Inert Multipolymeric
Matrix
827 Series is an unparalleled single package primer that is ideal for CUI services from -300°F up to 1200°F, or where extreme thermal shock
resistance is necessary. 827 offers high build properties and is very surface tolerant, all in a dry-fall "SPRAY-SAFE" formula.
Topcoats
840
400°F Silicone Alkyd
Copolymer
840 is a single package modified silicone topcoat originally designated for HMA plants. Due to the high silicone content and heat and light stable
pigmentation, 840 maintains exceptional gloss and color purity in heat and rugged coastal and winter environments. 840 Series will remain in
tact in constant temperatures of 350°F and intermittent excursions to 400°F. "SPRAY-SAFE"
815-DF
500°F Acrylic Silicone
Copolymer
815 is an excellent topcoat option for components with service temperatures up to 500°F. This product does not require a heat cure and is
available in a full range of colors. "SPRAY-SAFE"
805-DF
1000°F Modified Silicone
Copolymer
805 Series is a single package coating available in a variety of colors. It offers excellent heat stability (thermal shock), corrosion resistance, color
purity, and ease of application. NOTE: This product heat cures at 250°F. "SPRAY-SAFE"
899-DF
1000°F Modified Silicone
Copolymer
899 is a single package coating that may be applied up to 8 mils DFT in one coat, offering higher build protection compared to other coatings in
this temperature range. 899 is the topcoat of choice for the 827 Series, offering a wide range of standard and custom color options suitable for
services from 350°F up to 1000°F. "SPRAY-SAFE"
807-DF
1200°F Silicone Copolymer
807 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in aluminum. NOTE: This
product heat cures at 250°F. "SPRAY-SAFE"
808-DF
1200°F Silicone Copolymer
810 has excellent adhesion to steel surfaces and provides corrosion protection for services up to 1200°F. Available in gray and #810 black. NOTE:
This product heat cures at 250°F.
GENERAL MAINTENANCE COATINGS FOR HMA PLANT COMPONENTS WITHOUT ELEVATED TEMPERATURES
Primers
84-LH
Phenolic Modified Alkyd
84-LH Series is a phenolic modified alkyd with an open-ended topcoat window. It is a surface tolerant structural primer with an elaborate system
of rust inhibitors to assure outstanding corrosion protection even in rugged climatic environments. It also provides maximum adhesion and
corrosion protection on areas with limited surface preparation.
97-HF
Polyamine Adduct Epoxy
97 Series epoxy mastic is specifically formulated to alleviate extensive surface preparation. It can be applied over minimally prepared surfaces,
rusty steel, and deteriorated previous painted surfaces. It dries to a semi-gloss finish and may be applied up to 8 mils DFT per coat. A complex
rust inhibitor system ensures excellent corrosion protection.
Direct-To-Metal
97-HF
Polyamine Adduct Epoxy
97 Series epoxy mastic is specifically formulated to alleviate extensive surface preparation. It can be applied over minimally prepared surfaces,
rusty steel, and deteriorated previous painted surfaces. It dries to a semi-gloss finish and may be applied up to 8 mils DFT per coat. A complex
rust inhibitor system ensures excellent corrosion protection in a single coat system.
Topcoats
36-HF
Aliphatic Acrylic Urethane
36 Series is a 2-K aliphatic urethane topcoat specifically designed to meet low VOC requirements. Its automotive "Wet Look" exceeds
conventional acrylic urethanes as it maintains its appearance, chemical resistance, and film flexibility for years. These qualities, along with an
outstanding coverage rate, make it the product of choice for high performance maintenance painting.
150C
HiGlo Alkyd
150C Series is a high performance topcoat offering premium corrosion protection, gloss retention, and color purity when compared to generically
similar products. It is an inexpensive, durable coating to be used on structural steel, varying plant components, quarries, and transportation
equipment. It may also be enhanced with a urethane modifier 34-ALH-100.
150-28
HiGlo Alkyd
150-28 offers the same properties of 150C Series, and also meets 2.8 lbs per gallon VOC requirements.
SOLVENT BORNE DRY-FALL COATINGS
Primers
475R
Polyamine Epoxy
475R Series is a high performance Dry-Fall 2-K polyamine epoxy primer. It is very surface tolerant, and may be applied over tightly bonded rust
or mill scale and offers outstanding chemical, water, weathering, and corrosion protection. 475R is also an excellent tie coat when used between
a zinc primer and topcoat of choice. "SPRAY-SAFE"
475R-CA (VOC < 250 g/L)
Polyamine Epoxy
475R-CA has all of the properties of 475R Series, and meets California VOC requirements of < 250 g/L. "SPRAY-SAFE"
84-DF
Phenolic Modified Alkyd
84-DF Series is a phenolic modified alkyd with an open-ended topcoat window. It is a surface tolerant structural primer with an elaborate system
of rust inhibitors to assure outstanding corrosion protection even in rugged climatic environments. It also provides maximum adhesion and
corrosion protection on areas with limited surface preparation. "SPRAY-SAFE"
Direct-To-Metal
485R
Polyamine Epoxy
485R Series is a surface tolerant direct-to-metal coating that may be applied over tightly bonded rust or mill scale and offers outstanding
chemical, water, weathering and corrosion protection. Available in a wide range of standard and custom colors. "SPRAY-SAFE"
485R-CA (VOC < 250 g/L)
Polyamine Epoxy
485R-CA has all of the properties of 485R Series, and meets California VOC requirements of < 250 g/L. "SPRAY-SAFE"
485R-SC (VOC < 100 g/L)
Polyamine Epoxy
485R-SC has all of the properties of 485R Series, and meets California South Coast Air Quality Management District VOC requirements of < 100
g/L. "SPRAY-SAFE"
Topcoats
68R
Aliphatic Urethane
68R Series Aliphatic Urethane Topcoat provides a deep automotive "Wet Look", ultimate color purity, flexibility, UV and corrosion protection
even when exposed to a variety of harsh climatic and chemical environments - all in a solvent-borne Dry-Fall formula! "SPRAY-SAFE"
68R-CA (VOC < 250 g/L)
Aliphatic Urethane
68R-CA provides all of the properties of 68R Series, and meets California VOC requirements of < 250 g/L. "SPRAY-SAFE"
720
Modified Silicone Alkyd
720 Series is a single package modified silicone alkyd topcoat with excellent color purity and gloss retention. A premium choice for a high gloss
finish at a more economical cost compared to a urethane.
720-CA (VOC < 250 g/L)
Modified Silicone Alkyd
720-CA provides all of the properties of 720 Series, and meets California VOC requirements of < 250 g/L. "SPRAY-SAFE"
65R
Modified Acrylic
65R Series is an extremely fast drying modified acrylic topcoat with outstanding gloss and weathering properties. This very economical coating
will not retain gloss and color purity as long the 68R Series urethanes, but it is a very durable coating with a good reputation in heavy industrial
environments.