Adju vant
Crop Oil Concen t r at e
Control tough weeds with Prime Oil®
adjuvant in the tank
Improve Product Penetration
Prime Oil® adjuvant is a premium crop oil concentrate,
consisting of a blend of special nonionic surfactants
with phytobland oil. As a crop oil concentrate, Prime
Oil® adjuvant breaks down waxy cuticles of leaves to
improve product penetration and provides uniform
coverage of leaf surfaces. Prime Oil® adjuvant
is compatible with a broad range of herbicides,
insecticides, fungicides, fertilizers and micronutrients.
Mixing and Application
Ground:
1 to 4 pints of Prime Oil® adjuvant in 20 to 100
gallons of water. See crop protection product label
for specific recommendations. Do not exceed 2.5%
volume to volume.
Aerial:
2 to 8 fluid ounces per acre. Follow
recommendations on pesticide label for minimum
water volume per acre or if higher rates are required.
Add Prime Oil® adjuvant to the tank after adding
pesticides and/or fertilizers.
To lock in spray coverage or deposition and lock out
drift, include InterLock® adjuvant.
ALWAYS READ AND FOLLOW LABEL DIRECTIONS. WinField is a trademark, and InterLock and
Prime Oil are registered trademarks of Winfield Solutions, LLC. © 2013 Winfield Solutions, LLC
Ingredients
Phytobland paraffinic oil 83%
Alkylphenol ethoxylate and tall fatty acids 15.47%
Constituents ineffective as spray adjuvants 1.53%
TOTAL100%
Packaging
2 x 2.5-gallon jugs
Mini-Bulk
Bulk