Revolution 60 Aluminum Flatbed (model: HCR6012TAF)
Length x Width: 48 feet x 102 inches
Suspension type: Tridem air
Frame rating: 80,000 lbs distributed (60,000 lbs concentrated
Tire inflation: None standard
Suspension detail: AANT23K Intraax air ride provided by
Flooring: knurled extruded 3 1/8 aluminum, multi-hollow
Manual dump valve: Installed inside box on road side
Air load scale: Liquid filled gauge inside dump valve box
Front corners: tapered
Electrical system: exclusive Revolution technology: provided
in 4 feet)
friction stir welded floor with two wood nailer strips (nailer
strips provided by OVERSEAS HARDWOOD COMPANY)
Side Rails: Exclusive Revolution Technology – one piece routed
aluminum designed for strength and impact
HENDRICKSON
Lift Axle: Air lift on front axle with ILAS III automatic speed
sensing control
Stationary chain cargo tie downs: 15 pair recessed in
siderails
by GROTE INDUSTRIES (LED lights: 5 marker lights per side,
3 rear recessed light bars, 10-year comprehensive electrical
system warranty)
Stake pockets: routed aluminum on 24-inch centers (two load
Electrical: 4-way socket on rear with one hot/one ground pin
Rubrail: integrated with side rail
Main beams: extruded aluminum (12-inch flange with 26-inch
Paint: black urethane on steel parts with Revolution decals
Conspicuity tape: per NHTSA specs (installed in recess on
Kingpin: 24 inches
Loaded fifth wheel height: 49 inches
Landing gear: OEM Standard with forward and rear bracing
Bumper: meets U.S. underride requirements
Mudflaps: 1 set Revolution
Winch track: dual full-length integrated aluminum (double L)
Sliding winches: 24 low-profile 3-bar type; 12 each side;
securement openings between stake pockets)
beam height)
provided by JOST INTERNATIONAL
Bulkheads: none standard
Bulkhead pockets: none standard
Number of axles: 3
Axle spindle: tapered
Brakes: spring brakes, auto slacks; dust shields on axles
ABS: 4S/2M (no cable or tool)
Axle spread: 72 inches–set at rear (approx 37 ft C/L Kingpin
to C/L Tridem)
Hub and drums: 10-hole hub-piloted with outboard cast drums
Wheel ends: grease in hubs *** 5-year wheel end warranty ***
Wheels: : (12) 22.5 x 8.25 aluminum LvL One buffed wheels
provided by MAINTENANCE PLUS OF BIRMINGHAM, AL
Tires: (12) 11R 22.5 14PR OEM standard tires provided by
MAINTENANCE PLUS OF BIRMINGHAM, AL
for wide load and strobe light connections
rubrails)
sliding rope hook/ winch strap hook retainers opposite winches
provided by ANCRA INTERNATIONAL, LLC (*No sliding hooks
for winch straps)
Fixed Rope Hooks: 8 total: 4 welded on front/4 welded on rear
Winch straps: None standard
Dock bumpers: 1 pair rubber on rear
Hubodometer: none standard
Registration holder: Install registration holder/OEM standard
Tool Box: 1 aluminum double-door box provided by
AERO INDUSTRIES (24 inches x 24 inches x 60 inches)
includes 4 sliding securement devices and 4 chocks
VIN plate: Canadian VIN plate
Revolution 60 tandem base weight: 8,620# +/- 3%
Revolution 60 tridem contest trailer weight
with options: 11,000# +/- 3%
Corporate Headquarters • 3515 Industrial Way • Jasper, Alabama 35501 • 800-821-6535 • www.fontainetrailer.com
©2013 Fontaine Trailer Company • Photo may show some optional equipment • Specifications subject to change without notice