06
TABLE
COLLECTION
contents
KR, SP
Cala, 2705-T
Chloë, Chloë-T
page
4,5
6,7
8,9
Obelisk, Cube
10,11
Edge
12,13
VG, Ursus-T
VK, Fly
14,15
16,17
CL, VR, Diana-T/71
350, 750, 850, 950-T
18,19
Bangor, Dublin, Pilar
22,23
KI
Lira, Lira-M
24,25
Pyramid
28,29
Coin, Odin 30,31
Dime, Cent
32,33
Freia, Wodan
34,35
Åse, Thor, Verona 36,37
Table-Tops
38,39
Specials
40-42
20,21
26,27
3
KR
A solid wood table with a sturdy look that seems to be lifted off the ground.
Available in oak and beech wood and in all our finishings.
Available with our Typ-100, Typ-200, Typ-400, Typ-500 and Typ-600 table tops.
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
74 cm. BASIC
86 cm. MIDDLE
111 cm. HIGH
KR-E/74+TYP-200
Table: SP-E/71, Bench: Forli/46-120
SP
A modern table with angled legs that is
available in 3 different heights.
Best suited for table tops bigger than
60x60 cm.
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
71 cm. BASIC
SP-E/111+TYP-200(50)
86 cm. MIDDLE
111 cm. HIGH
5
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
74 cm. BASIC
86 cm. MIDDLE
111 cm. HIGH
Option:
INOX
Table: CALA/74+TYP-400
Chair: ISIS/01/46+Arm
Cala
A table specially designed for the care sector with wheelchair access along the length
of the table.
Available with our full collection of table tops.
Table: CALA/74+TYP-400
WOOD
Table: 2705 T-E/71+TYP-200, Stool: 2705-E/46
2705-T
A table in oak wood, designed to
match our 2705-series of stools in
3 different heights.
Available with our Typ-100, Typ-200,
Typ-500 and Typ-600 table tops.
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
2705-E/62
2705-E/80
71 cm. BASIC
86 cm. MIDDLE
111 cm. HIGH
7
Chloë
CHLOE-S/46, -F/46, -/80 and CHLOE-R/46
CHLOE-T/71+TYP-400
Chloë-T
A beech wood table that is part of our Chloë-range of products.
This new series of models is inspired by shapes of the past, but with a modern
twist. We have been inspired by the famous “Oirschotse” chair and the Windsor
Rocker.
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
71 cm. BASIC
86 cm. MIDDLE
111 cm. HIGH
Table: CHLOE-T/71+TYP-400, Chair: CHLOE-S/46,
Armchair: CHLOE-F/46
9
Obelisk
A slice of oak tree supported by a large oak veneered table base called Obelisk.
Obelisk can be combined with other table tops and is available in various heights.
This is an informal table top that clearly shows the differences in wood that occur
from one tree to another.
OBELISK/86+TYP-200
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
71 cm. BASIC
86 cm. MIDDLE
108 cm. HIGH
OBELISK/71+TYP-800, Chair 623-E/46
OBELISK/71, Stool CUBE-E/50
Cube
The stool Cube is made of solid oak wood and can, but need not be, upholstered.
handle
Cube
11
Edge
Edge-E/71+TYP-200, Stool: New Peak-E/46
This model is available in 5 different heights. Please see our brochure
“02 Benches Collection” for our matching range of benches.
Model Edge can be delivered in oak as
well as in beech wood
Beech wood
Edge/71+TYP-400
From lengths 220 cm. and up: 6 legs
Oak wood
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
21
edge/
*
lounge
42
edge/
*
low
71
*
edge/
basic
86
*
edge/
middle
111*
edge/
high
*=height of base
Table: EDGE-E/111, LIRA-E/71, Stool: 323-E/80, Chair: MYRA-E/46,
Bench: TORINO/VL-LOW/80
13
Table: VG/71+TYP-500, Chair: Various models
VG
This model is only available in large sizes. The legs are made of layers of tulip wood, which has a clearly visible and flamboyant
structure that is clearly visible in lighter finishings.
Therefore, we advise a lacquer finish for the legs.
Our advice would be a minimum
of 90 cm. width, so a chair can be
placed at the table head.
The maximum standard size for a
table with 4 legs is 260x100 cm.
The table base may be combined
with a variety of table tops from
our collection.
VG/71+TYP-500, Chairs: 185-E/46, 422-E/46, 323-E/46
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
URSUS-E/86, Stool: 323-E/62
URSUS B-E/46-V
URSUS B-E/46+R64 210x50
URSUS B-E/46+R62-V 210x50
Ursus-T
Form and functionality blend into one
and create a strong image of design.
URSUS T-E/71+323-E/46
Our Ursus range is available in
3 different heights (71, 86 and 111 cm)
and offers matching benches in various
lengths and shapes.
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
15
VK
VK-7/71+TYP-1
VK/71+TYP-1
VK-7/71+TYP-1, Chairs: Various models
The legs of VK table have a width of
50 mm. The legs are also available in
a width of 70 mm. (VK-7).
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
Fly
A table with wheelchair acces in all sides.
To be combined with any of the below table legs.
option
FLY+VR-9/71 + TYP-400
FLY+CL-9
FLY+VR-9
FLY+VK-7
FLY+VK-7/71+TYP-22 (with transportwheels),
Armchair: 1444/01/46
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
17
CL / VR
CL-6
CL-8
CL-9
CL-9/71+TYP-200
Diana-T/71+TYP-6
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
VR-9
VR-9/71+TYP-200
VR-20
CL-20
Table: CL-20/71+TYP-1, Chair: 6005/46
option
Create a communal table with our optional magazine stand.
CL-20/71+TYP-200, Chair: 262/01/46, Armchair: 1162/01/46
19
850
850/71+TYP-200*
350/108+TYP-200, Stool:2524/80
750/71+TYP-200
350/71+TYP-200*
950
Solid wooden base with a table top in
FSC-wood
*Available heights:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
950/71+TYP-200
86 cm. MIDDLE, 108 cm. HIGH
Table: 950-T/71, Chair: 162/01/46
21
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
86 cm. MIDDLE, 108 cm. HIGH
DUBLIN-60/71+TYP-40
BANGOR-60/71+TYP-6
BANGOR-80/71
Bangor
A solid wood table available in different
heights made of FSC-wood.
BANGOR-80/108+TYP-200,
Stool: 4000/80+6024 TOP
BANGOR-60/108+TYP-200,
Stool: 2162/01/80
Pilar
PILAR-E 50/71+TYP-500
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
86 cm. MIDDLE, 108 cm. HIGH
Table: PILAR/71, Chair: 444/46, Bench: SNAKE and SNAKE-POUFFE
23
40x40 cm.
Is also available in 60x60 cm.
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
86 cm. MIDDLE, 108 cm. HIGH
KI-E-40x40/71+TYP-55
Ki
All visible wood is solid oak or oak veneer. Select your own inlay for the table top.
Finishing shown is in eggshell top coat, seemingly unfinished, original wood surface.
KI-E-60x60/86 (with footring)
+TYP-55
KI-E-90x50/71+TYP-55
Table: KI-E/71, Chair: ARUJI-E/46, Bench: GOLFO/KN-46
25
Table: LIRA-E/86, Bench: EDGE BANCO-E/62
variant
LIRA-M 40x40/71
LIRA-E 40x40/71+TYP-500
Lira
Available with a solid wood (oak or beech wood) or metal column. The foot of the
table base is made of solid metal.
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 111 cm. HIGH
LIRA-E 90x50/71+TYP-500
27
Table: PYRAMID/86, Stool: NEW PEAK-E/62+R32, Bench: TORINO-LOW/62
PYRAMID/71-40X40+TYP-500
Pyramid
A firm table leg made of metal and finished with oak veneer.
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 108 cm. HIGH
PYRAMID/71-40X40 (2X)+TYP-24, Chairs: Myra-E/46, Milo-E/46, 623-E/46
29
Coin
A cast iron base with a solid wood
column. Pick your own colour!
COIN-56/108 (with footring)+TYP-200, Stool: 202/80
COIN-56/71+TYP-200
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 108 cm. HIGH
Table: COIN-56/86 and -56/108, Bench: EDGE SOFA-E/62
Odin
A traditional cast iron base available in different heights that
match our chairs, stools and benches.
Available heights for this model:
ODIN-56/108+707/80
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 108 cm. HIGH
ODIN-56/71+TYP-200
31
Dime
A table base in chrome or black metal
available in 50 and 60 cm diameter.
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
86 cm. MIDDLE, 108 cm. HIGH
DIME-50/71+TYP-400
DIME-60/71 Chrome+TYP-200
DIME-50/71 Chrome+TYP-400
DIME-60/71 Black+TYP-ZINC/200
CENT-40/71 (INOX)+TYP-500
CENT-40/71+TYP-400
Standard: adjusting screws
Cent
A group of table bases in inox and black
metal.
Available in 40, 45 and 60 cm diameter
and 40 x 40 cm, 60 x 60 cm.
CENT 40x40/71+TYP-ZINC/200-E
Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC,
86 cm. MIDDLE, 108 cm. HIGH
33
Freia
FREIA-3/71+TYP-200
FREIA-4/71*+TYP-200
FREIA-22/71+TYP-200
*Available heights:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 108 cm. HIGH
Wodan
WODAN-56/71+TYP-6
WODAN-76/108+TYP-6, Stool: 2424/80
WODAN-56x76/71
WODAN-76/71*
Table: FREIA-22/71, Chair: 262/01/46, Bench: TORINO/46 HIGH (with headroll)
35
Åse
ASE-76/108
ASE-76/71+TYP-200
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
71 cm. BASIC
86 cm. MIDDLE
108 cm. HIGH
ASE-43/71
ASE-56/71
ASE-76/71
ASE-90X76/71
Thor
Available heights
for this model:
21 cm. LOUNGE
42 cm. LOW
71 cm. BASIC
86 cm. MIDDLE
111 cm. HIGH
THOR-256/71+TYP-200
Verona
*Available heights for this model:
21 cm. LOUNGE, 42 cm. LOW, 71 cm. BASIC, 86 cm. MIDDLE, 108 cm. HIGH
VERONA-50/71+TYP-ZINC/6
Table: VERONA-50/71, Bench: Special execution, Chair: NANCY-S/46
37
TYP-1
TYP-1 E
Beech wood veneered chipboard with solid beech wood rim.
Thickness 30 mm.
Oak veneered chipboard with solid oak rim.
Thickness 30 mm.
TYP-100
Top made of solid oak wood, with knots, several edges possible.
Thickness 30 mm.
Select your own
table top
TYP-800 TREE-TRUNK (for OBELISK)
TYP-100
Top made of solid oak wood, with knots,
Thickness 30 mm.
TYP-14
Beech wood veneered MDF with profiled rim.
Thickness 30 mm.
TYP-20
Beech wood veneered MDF with straight MDF rim.
Thickness 30 mm.
TYP-24
Top with inlay of marmoleum, laminate or beech wood veneer.
Solid beech wood rim. Thickness 37 mm.
TYP-45
Marmoleum fixed on chipboard (inlay) with solid beech wood frame.
Thickness 45 mm.
Solid oak wood
TYP-55
TYP-2
Top with inlay of marmoleum, laminate or beech wood veneer.
Oak veneered frame. Thickness 55 mm.
Beech wood veneered chipboard with beech wood veneered rim.
Thickness 30 mm.
TYP-200
Top made of solid oak wood and distressed. Several edges possible.
Thickness 30 mm.
TYP-4
Plastic laminated chipboard with beech wood rim.
Thickness 30 mm.
TYP-400
Solid beech wood, parquet bonded. Several edges possible.
Thickness 27 mm.
TYP-22
Beech wood veneered MDF with straight beech wood veneered rim.
Thickness 30 mm.
TYP-40
Marmoleum fixed on chipboard (inlay) with solid beech wood frame.
Thickness 45 mm.
TYP-5
Beech wood veneered MDF with profiled edge.
Thickness 30 mm.
TYP-6
TYP-500
Beech wood veneered MDF with profiled edge.
Thickness 30 mm.
TYP-LINO/6
Marmoleum inlay 45x45 cm. fixed on chipwood. MDF profiled edge.
Thickness 30 mm.
TYP-ROCK/100
Tile inlay 45x45 cm. Fixed on chipboard. Solid oak wood edge,
antique look. Thickness 30 mm.
TYP-ZINC/200
TYP-600
Solid oak, parquet bonded. Several edges possible.
Thickness 27 mm.
Solid oak, parquet bonded. Several edges possible.
Thickness 40 mm.
TYP-LINO/100
TYP-ROCK/6
Marmoleum inlay 45x45 cm. fixed on chipwboard.
Solid oak wood edge, antique look. Thickness 30 mm.
Tile inlay 45x45 cm. Fixed on chipboard. MDF profiled edge.
Thickness 30 mm.
TYP-ZINC/100
TYP-ZINC/6
Zinc plate 45x45 cm. Fixed on chipboard. MDF profiled edge.
Thickness 30 mm.
Zinc plate 45x45 cm. Fixed on chipboard.
Solid oak wood edge, antique look. Thickness 30 mm.
table-tops
Zinc inlay 45x45 cm. Solid oak wood edge. Thickness 30 mm.
Laminate
We can deliver all types of laminate for the
following table tops:
TYP-55
TYP-24
TYP-4
TYP-40
TYP-45
TYP-LINO/6
TYP-LINO/100
TYP-ZINC/200
39
specials
colourprint
computerprint
Tabletops made to measure.
We gladly deliver table tops in a standard version, but it doesn’t have to be that way.
Different finishings are possible, but you can also add an image, a chessbord, or a logo.
Your own identity reflected in the top of your table.
logo laser
top with inlay
41
Tabletops made to measure.
Our craftspeople will help you by
producing tables that create the
atmosphere you look for.
specials
painting by hand
We aim to realize an interior that
makes you feel at home.
Stylish and relaxing.
The possibilities are as plentiful as
your imagination permits.
Our furniture is designed for intensive use.
We are a FSC-Registered company.
All of our models in this brochure
are available in a large collection
of recycled or renewable fabrics.
43
T +31 13 460 9 460
F +31 13 460 9 470
www.hutten.com e-mail: [email protected]
2012-6 Colofon: Concept, art-direction, grafisch ontwerp: HDT Team. Fotografie: Studio de Winter bv. Druk: VDB Almedeon-Oisterwijk. Registered models. Designs by: Ralph Gosselink, HDT Team. Copyright Hutten bv
For more info: