Vindicator ®
Communications
Network
Integrated Security System
Vindicator® provides one of the world’s fastest, most flexible
• Data devices accept digital and analog signals from many
and secure data communications networks. The Vindicator
field sensors such as access control readers, perimeter
Communications Network is composed of a series of
detection devices, alarm information from fire systems, etc.
intelligent devices that provide encrypted and redundant
The data is then encrypted and routed to the end user via
data transfer from the sensor to the command and control
LAN/WAN, RS485, fiber, RF, or other existing media.
center. The Vindicator Network is used as the backbone for
• Gateways bridge two different forms of media - i.e.,
security systems at high-risk facilities, and is a cost-effective
they often transport data from RS485 lines to a fiber optic
solution for a variety of sites and applications. The Vindicator
network. Gateways are also used as intelligent routing
Communications Network is installed at more than 1,500
devices to segment networks and route data through
sites worldwide, including military bases, refineries,
various paths for enhanced system performance.
correctional facilities, ports, utilities, and financial institutions.
The Vindicator Communications Network integrates any
number of Vindicator devices with the V5 Network Security
Appliance to create an encrypted, private network on any
enterprise infrastructure. The network consists of two basic
types of devices for encrypting and transporting data for
security, fire and life safety, and building automation:
F E AT U R E S
Flexible - Vindicator network devices
can be easily installed at any site to
extend the network where it is needed.
Data can then be securely routed from
the field to monitoring facilities via
many different types of existing
communications media. The network
also integrates with many types and
brands of pre-existing access control
devices, sensors and detection
systems.
Secure - This network has never been
victim to hacking, and is not susceptible
to viruses or worms or other malicious
attacks. The fully redundant network is
TDEA approved (Triple Data Encryption
Algorithm, also known as Triple DES) by
the National Institute of Standards and
Technology. The system is also certified,
without waiver, to protect nuclear
facilities.
Reliable - Vindicator network
components deliver an 11-year meantime-between-failure rate.
Programmable - Analog inputs are
completely programmable. State values
of Alarm, Secure, Trouble, Tamper,
Sensor Test and Local Access are
assignable to programmable voltage
windows that can overlap and be
assigned precedence based on your
application, making the range of input
devices supported virtually unlimited.
A digital filter ensures that when a
state-change does occur, there are no
false readings.
Vindicator® Communications Network
Integrated Security System
S P E C I F I C AT I O N S
Approvals
• Meets UL Grade AA Line Security
Requirements
• Meets DIAM 50-3 Class B Line
Security Requirements (meets Class A
with optional DES or TDEA encryptor)
• FCC Part 15, Subpart J, Class A
• TDEA (Triple DES) and DES certified
by NIST
• DCID 6/9
• Certified for nuclear missions
(USAF: PL1-PL4)
Sensor Info
• Input Sensitivity: Individually
Programmable, 0.0 to 5.0 volts
(255 levels)
• Input Timing: Individually
Programmable, 255 counts
• Sensor Test: Automatic,
Programmable, Random, or Regular
Schedules, 1 to 32767 minutes
Environmental
• Temperature: -30° to 70°C
(-22° to 158°F)
• Humidity: 95% RH, condensing
Data Bus
• Data I/O
- Two 4-wire RS485 ports (UHS-6842)
- Two mm Fiber Optic Ports,
(UHS-6842F)
• Range: 2.25 Km for RS485, 2 Km for
Fiber Optic
• Fiber Optic: Dual Fiber Optic Ports,
50, 62.5, or 100 micron fiber, type ST®
connectors
Electrical
• Sensor Inputs: Eight EOL supervised
(Class B) user-adjustable EOLR value
(2.2K ohm typical)
• Relay Outputs: Four Form A;
Programmable N.O. or N.C.; 0.5 A
@ 115 VAC, or 2.0 A @ 24 VDC
• Power: +10 to +24 VDC,
200 mA maximum
• Indicators: Three bus status LEDs
• Connections: Screw Terminals
• Transient Suppression on power
inputs and electrical data busses
Mechanical
• Size: 10.5"L x 7.5"W x 1.15"H
(26.6 cm x 19 cm x 2.9 cm)
• Weight: 2.0 lbs (.9 kg)
• Mounting: NEMA enclosure,
shelf or wall
• Replaceable Modules: None
ORDERING
Gateways
548-01216-21
548-01216-14
548-01216-05
548-01216-22
548-01216-07
556-32205-00
553-31479-00
UHS-8400: 8 Analog Sensor Inputs and
4 Relay Outputs, Bus Master (RS485 to
RS485) for repeater and distributed polling
UHS-8301: 8 Analog Inputs, Bus Master
(RS485 to fiber optic) for conversion from
wire to fiber optic data
UHS-8302: 8 Analog Sensor Inputs, Bus
Master (fiber optic to RS485) for conversion
from fiber optic to wire data
UHS-8101: 8 Analog Sensor Inputs, Bus
Master (RS485 to RS232) for interface with
local modem application
UHS-8102: 8 Analog Sensor Inputs, Bus
Master (RS232 to RS485) for interface with
remote modem application
SMART J-SIIDS 16 Zone Transceiver Module
Kit: includes: (1) UHS-8103 and modem
module card assembly, HDW and cables
UHS-8103: JSIIDS Gateway
Data Devices
548-01216-10
548-01216-30
548-31378-01
536-31364-00
536-31233-01
Other
508-33058-02
508-33058-03
548-31944-01
280-24032-00
550-00003-01
UHS-6842: 8 Analog Sensor Inputs and
4 Relay Outputs, Dual RS485 data
communications ports, self test
UHS-6842F: 8 Analog Sensor Inputs and
4 Relay Outputs, Dual Fiber Optic Loop
communications ports (2 I and 2 O), self test
UHS-1600 Data Transmitter:
(J-SIIDS Configuration)
UHS Mother Board, DT
UHS Daughter Board, DT
DES option for all devices
TDEA option for 6842/F devices
Standard power supply for devices
(12V 2.5A supervised)
Standard battery for devices (7A)
NEMA enclosure for mounting
(custom/configurable product)
Please contact Vindicator for factory-built field panels, which include data device, power supply, battery, enclosure, and all wiring
For more information: www.honeywellvindicator.com
Honeywell Security Group
Honeywell Vindicator Technologies
3019 Alvin Devane Blvd, Bldg. 4, Suite 430
Austin, TX 78741
1.512.301.8400 (sales)
1.800.367.1662 (support)
www.honeywell.com
L/VINVCND/D
November 2010
© 2011 Honeywell International Inc.