HYDROGEN PEROXIDE
FORTIFIED CARPET CLEANER
Technical Data
Specifications
Color:
Odor:
Base:
pH:
Viscosity:
Foam:
Optical Brightener:
Phosphate:
2-Butoxyethanol:
Solubility:
Detergency:
Rinsability:
Biodegradability:
Storage/Stability:
Weight Per Gallon:
Freeze/Thaw Stability:
Dyes:
VOC Content:
Hydrogen Peroxide
Fortified
Description
Colorless
Very little odor
Detergent Blend
4.5 ± 0.5
Water thin
Very Low
None
None
None
Complete with water
Excellent
Excellent
Complete
6 Months
8.59 lbs. Per gallon
Keep from freezing
None
None
HMIS Hazardous Materials I.D. System
Health 2
Flammability 0
Reactivity 0
Personal Protection B
What the Pros Know
A residue-free carpet cleaner that uses hydrogen peroxide
to boost the cleaning power and eliminate odors. Multiple
use as a low moisture cleaner, pre-spray and extraction
cleaner. Safe on synthetic and natural carpets.
Directions
Multiple Applications
Exceptional Cleaning
& Deodorizing
Read all directions and cautions on the label prior to using. Consult
the MSDS for recommended personal protection equipment.
Vacuum the carpet thoroughly. Pre-test carpet for colorfastness in
an out-of-sight area.
Low Moisture Cleaner - Dilute 1:10 (12 ounces per gallon of
water). Generously spray the carpet with a pressurized sprayer.
Pay special attention to any travel lanes and heavily soiled areas.
Allow to dwell for 5-10 minutes. Agitate with a carpet rake. Allow the
carpet to dry before vacuuming.
Prespray - Dilute 1:12 (10 ounces per gallon of water). Generously
spray the carpet with a pressurized sprayer. Pay special attention
to any travel lanes and heavily soiled areas. Allow to dwell for 510 minutes without drying. Rake carpet to loosen matted in traffic
areas to increase soil removal. Extract with Carpet Rinse Plus.
Hydrogen peroxide is an oxidizing bleach with
the ability to “boost” the power of cleaning
formulations. It is safer than using harsh
chemicals such as butyl or chlorine bleach.
Extraction Cleaner - Dilute 1:12 (10 ounces per gallon of
water). Extract following the direction of the cleaning equipment
manufacturer. For best results, follow with Carpet Rinse Plus to
neutralize and condition the carpet.
Professionally formulated multi-application
products can reduce your inventory needs and
simplify employee training. Fiber-Oxy may
be used as a low moisture no-residue interim
cleaning, a powerful pre spray, a deep cleaning
extraction cleaner and as a spotter.
Spotter - Dilute 1:8 (16 ounces per gallon of water). Remove solids
and excess liquid with a clean, white absorbent cloth. Apply spotter.
Agitate lightly from the outside of the spot to the center. Allow 3-5
minutes dwell time. Blot with a clean white absorbent cloth. Use
SSS Brush/Scrapper with a tamping action. Rinse well with water
and blot dry. For best results rinse and extract with SSS Power
Spotter.
CS-463
5/04