Meijer.com
88 5008 941
Monarch Kitchen Island
(Black Finish)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
E.
Front Rail
1 pc.
F.
Front Rail
1 pc.
I.
Shelf
4 pcs.
G.
Back Rail
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
J.
Bottom
1 pc.
M.
Door
1 pc.
H.
Back Rail
1 pc.
K.
Back Panel
2 pcs.
L.
Back Piece
1 pc.
N.
Door
1 pc.
O.
Drawer
2 pcs.
(Knock-Down Construction, please refer
to the last page of these instructions for
drawer assembly steps)
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt
(short)
4 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Head Cap Bolt
12 pcs. (+1 extra)
Adjustable Pin
16 pcs. (+1 extra)
Head Cap Bolt
(long)
6 pcs. (+1 extra)
Cam Lock
8 pcs.(+1 extra)
Cross Dowel
6 pcs. (+1 extra)
Cam Lock Screw
8 pcs.(+1 extra)
Wood Screw (short)
for Drawer Base Part
8 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
16 pcs. (+1 extra)
Wood Screw (short)
for Back Rail
8 pcs. (+1 extra)
Machine Screw
4 pcs.
Drawer
Pull Handle
4 pcs.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Meijer.com
Assembly Instructions 2/7
IMPORTANT
Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Side Panels (B) and (C).
(see Figure 1)
Cam Lock Screw
(Figure 1)
B
C
Cam Lock
G
K
L
B
K
(Figure 2)
(Figure 3)
STEP 2
Attach Side Panel (B) to Base (J) with
Head Cap Bolts (long) and Cross Dowels.
(see Figure 2)
Cross Dowel
H
J
Head Cap Bolt (long)
Attach Back Rail (H) to Side Panel (B) using
Cam Lock.(see Figure 3)
Attach Back Piece (L) to Back Rail (H)
and slide Back Panels (K) into place.
Attach Back Rail (G) to the unit using
Cam Lock.
Meijer.com
Assembly Instructions 3/7
Cam Lock
STEP 3
Cross Dowel
Attach Middle Panel (D) to unit with
Head Cap Bolts and Cross Dowels.
D
Attach Front Rail (E) and (F) to unit
using Cam Locks.
E
F
Head Cap Bolt (long)
(Figure 4)
Wood Screw (short)
for Back Rail
Cam Lock
STEP 4
C
Attach Side Panel (C) to unit
with Head Cap Bolts (long),
Cross Dowel and using
Cam Locks.
Insert 8x Wood Screws from
the back of unit, tighten up all
the Screws. (see Figure 4)
Cross Dowel
Head Cap Bolt (long)
Meijer.com
Assembly Instructions 4/7
STEP 5
Attach Frame Leg (P) and (Q)
to unit with Head Cap Bolts.
P
Q
Head Cap Bolt
(Figure 5)
(Figure 6)
STEP 6
Slide Drawer (O) into place.
Insert Adjustable Pin into side panels
and middle panels at the
desired level.
O
Slide Shelf (I) into position.
Attach Doors (M) and (N) to
the side panels, by sliding the
door lift hinges into the side
panel lift hinges.(see Figure 5)
Assemble Pull Handles to
Door (M) and (N) with Machine
Screws.(see Figure 6)
O
M
I
I
I
Adjustable Pin
N
I
Meijer.com
Assembly Instructions 5/7
Drawer (O)
O1
O3
N3
O4
O2
STEP 1
Figure 1
Attach O1 to O3 and O4, using
a Phillips screwdriver and
long wood screws (4X),
tighten halfway.
O3
MAKE SURE ROLLER
IS ON THE BACK
O1
O5
O4
Attach O2 to O3 and O4 using
long wood screws (4X),
tighten halfway. (see Figure 1)
Figure 2
O2
STEP 2
Slide O5 into the grooves in O3
and O4. Be sure to push O5 all
the way forward so it meets O1.
(see Figure 2)
O1
O3
O5
O4
O2
Figure 3
N2
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in N5
and tighten (see Figure 3)
Figure 4
STEP 4
Assemble Pull Handle with
machine screws. (see Figure 4)
Tighten all screws used in drawer assembly.
Part List
O1.
Front Part
2 pcs.
O2.
Back Part
2 pcs.
O3.
Side Part
2 pcs.
O4.
Side Part
2 pcs.
O5.
Base Part
2 pcs.
Meijer.com
Assembly Instructions 6/7
Head Cap Bolt (short)
A
STEP 7
Pull out the Drawers from unit.
Place Top (A) onto the unit, using
Head Cam Bolts (short). (see Figure 7)
Side Drawers into place.
(Figure 7)
Meijer.com
Assembly Instructions 7/7
Top Extension Instructions
STEP 1
Lift up the Leaf Top.
STEP 2
Holding the Leaf Top up, pull
out a back leg from the unit;
then pull out the other
back leg.