Monogram 27" Built-In Single Oven
ZEK7000SHSS
OVERALL DIMENSIONS
ZEK7000SHSS
26 3/4" (68.0)
25" (63.5)
min cutout width
3/4"
(1.9)
5 1/4"
(13.4)
27 5/8"
23 1/4"
(70.2) min
cutout height
(59.1)
6 5/16"
(16.2)
7/16"
(1.1)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
24 5/8" (62.6)
1 1/4" (3.2)
SPECIFICATIONS
14 15/16"
(38.0)
8 7/16"
(21.4)
1 7/8"
7 1/4"
Overall Width
26-3/4" (68.0 cm)
Overall Height
28-13/16" (72.2 cm)
Overall Depth
Including Handle
26-5/8" (67.6 cm)
Oven Door Clearance
20-1/2" (52.0 cm)
Overall Oven
Interior Capacity
4.3 cu. ft. (121.8 liters)
(4.7)
(18.4)
(73.2)
SIDE VIEW
15/16"
Minimum Cabinet Width* 27" (76.2 cm)
(2.3)
24 15/16" (63.2)
Minimum Cabinet Depth* 24" (61.0 cm)
200 lbs. (90 kg)
Cutout Width*
25" (63.5 cm) Min
25-1/4" (64.1 cm) Max
Cutout Height*
27-5/8" (70.2 cm) Min
28-1/8" (71.4 cm) Max
Cutout Depth*
23-1/2" (59.7 cm) Min
Volts/Hertz/Amps
240/208 V AC, 60 Hz, 20A
Conduit Length
40" (72" available special
order: WB18T10398)
Electrical Rating
2.7 kW at 208V
3.6 kW at 240V
Shipping Weight
140 lbs. (64 kg)
(8.8)
28 13/16"
Oven Interior Dimensions 21-1/2" x 17-1/4" x 20"
(W x H x D)
(54.6 x 43.8 x 50.8 cm)
Minimum Base Support
3 1/2"
9 3/8"
(24.0)
8 3/8"
(21.4)
26 5/8"
(67.7)
2"
(5.1)
TOP VIEW
20 1/2"
(52.2)
min
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
* Additional space will be needed for flush installation.
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An
individual properly grounded branch circuit or
circuit breaker is required. Hardware junction box
is required for built-in product.
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
Product Specification Revised 7/15
ZEK7000SHSS
Monogram 27" Built-In Single Oven
ZEK7000SHSS
WALL INSTALLATION
NOTES
B
23 1/2" (59.7)
min cutout depth
6 1/8"
(15.6)
23 1/2" (59.7)
min cutout depth
ELEC.
8 3/4"
6 1/8"
(15.6)
25" (63.5)
27 5/8"
(70.2)
(22.2)
ELEC.
cutout width
8 3/4"
(22.2)
27 5/8"
25" (63.5)
cutout width
(70.2)
C
A B
ased on a user height
of 5' 6" to 5' 10"
B J unction box location
(May also be located
in adjacent cabinet.)
C P
latform must be
able to support 200 lbs
(90 kg)
D M
aximum toe kick
height of 4" when
installed beneath a
certified cooktop.
32 1/2"
(82.6)
Recommended
cutout
location
from floor
32 1/2"
(82.6)
Recommended
cutout
location
from floor
A
STANDARD
INSTALLATION
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
STANDARD INSTALLATION
FRONT VIEW
3"
UNDERCOUNTER INSTALLATION
27 5/8"
23 1/2" (59.7)
min cutout depth
(7.6)
6 1/16"
(15.5)
3"
8 3/4"
(7.6)
(22.2)
6 1/16"
25" (63.5) minELEC.
(15.5)
cutout width
(70.2)
27 5/8"
ELEC.
B
8 3/4"
23 1/2" (59.7)
min cutout depth
Typically
3/4"
(70.2)
25" (63.5) min
(22.2)
cutout width
(1.9)
STANDARD
INSTALLATION
Typically
3/4"
C
STANDARD INSTALLATION
FRONT VIEW
(1.9)
D
STANDARD
INSTALLATION
STANDARD INSTALLATION
FRONT VIEW
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 7/15
Monogram 27" Built-In Single Oven
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
ZEK7000SHSS
ZEK7000SHSS
SIDE BY SIDE INSTALLATION
ZEK7000SHSS
NOTES
A D
imensions per
Advantium or
Microwave Oven
requirement
2" (5.1)
min
2" (5.1)
min
A
17 1/2"
ELEC.
(44.5)
ELEC.
ELEC.
17 1/2"
(44.5)
ELEC.
2 1/2"
(6.4) min
(6.4) min
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
2"
B
9 1/4"
2"
(5.1) min
E J unction box location
for wall oven. (May
also be located in
adjacent cabinet).
(23.5)
9 1/4"
(23.5)
F G
as regulator and
electric connections
for cooktops must be
located in an adjacent
accessible location to
the right
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
CL
H
I
ELEC.
ELEC.
GAS
3/4" thick platform
required
3/4" thick platform
required
D
wall oven
Wall oven
ELEC.
E
To centerline
of gas pipe
5"
ELEC.
cooktop
ELEC.
cooktop
F
G
4 3/4"
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
ELEC.
wall oven
2 7/8"Wall oven
(7.4) max
Junction box
can protrude
2 wall
7/8"
from back
(7.4) max
of installation
Junction
(Not cabinet
wall)box
can protrude
from back wall
of installation
(Not cabinet wall)
(12.1) max
4 3/4"
GAS
5"
GAS
(12.7)
GAS
(12.1) max
G T
op and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be
sure they are attached
securely, since they will
anchor the oven in the
cabinet.
CL
UNDER COOKTOP INSTALLATION
C
C N
ote this oven is only
approved to be installed
under specific models as
labeled on this unit.
D S
upport platform made
of 3/4" (1.9 cm) wood
is required. Must be
capable of supporting
150 lbs (68 kg). Support
Platform base to be
same height as toe kick.
2 1/2"
(5.1) min
B D
imension per Warming
Drawer requirement
FRONT VIEW
(12.7)
To centerline
of gas pipe
H D
imension varies based
on model.
example:
ZGU385
5 1/2"
(14 cm)
(from wall)
ZGU384
4 5/16"
(10.9 cm)
(from wall)
I D
imension varies based
on model.
example:
ZGU385
0" (0 cm)
(centerline)
ZGU384
12 1/16"
(30.6 cm)
(centerline)
FRONT VIEW
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 7/15
Monogram 27" Built-In Single Oven
ZEK7000SHSS
FEATURES AND BENEFITS
Glass touch controls - Allow you to adjust oven
settings quickly, with little effort
True European Convection - Achieve delicious
results from a third heating element and fan
combination
4.3 cu. ft. capacity - Accommodates even the
largest meals
Ten-pass bake element - Covers more surface
area for more even baking results
Self-clean, heavy-duty roller racks - Glide open
smoothly to simplify loading and unloading
Eight-pass dual broil element - Provides
complete coverage and even browning, even for
large dishes
WiFi Connect - Allows you to control oven
functions from anywhere inside or even outside
your home, using your smartphone or other
web-enabled mobile device
R
Black interior – Offers a stylish complement to
the sophisticated exterior design
Product Specification Revised 7/15
Client | GE Appliances
NOTES:
Job Number | 82323
File Name |
ZEK7000SHSS_c4.indd
8.5" x 11"
4pgs - 4c
Date | 7/6/15
MB Database | gea_creative/79710
Operator | glb, jab jv, kj, jv
Art Director | Chris Colby
COLOR: ■ 4 Color ■ Black and White
■ 1 PMS ■ 2 PMS ■ 3 PMS
Art ACD | Chris Colby
AE:
Art ACD:
Art Director:
Proofreader:
Writer ACD:
MB/ gea_creative/ 0_quick_specs/ quick specs/ 2015_Monogram /
Wallovens /
(or appropriate product line subfolder)