Dial/Test Indicator & Magnetic Stand Sets
DIMENSIONS
SERIES 7
20° adjustable
20
Stem hole ø6
Stem hole ø6
150
177
Stem hole ø9.53
(3/8”)
ø10
47
M8×1.25
55
55
47
M8×1.25
150°
5
5
50 (W)×58 (D)
150°
5
7010S
5
50 (W)×58 (D)
7011BN
Stem hole ø6
Stem hole
ø9.53 (3/8”)
(3/8” for 7014E)
(330)
(396)
ø8
Bush
ø16
Clamp
ø8
ø6
ø6
Dovetail
ø6
M8×1.25
106
Ball-joint
25
55
150°
5
5
50 (W)×58 (D)
ø30
7014-10/7014E-10
6° adjustable
7012-10
81
74
180°
340°
Set No.
64PKA078*
64PKA079*
513-907
513-908
64PKA079
Included in set
2804S-10, 7010S
2416S, 7010S
513-402, 7014E-10
513-404E, 7014-10
*Supplied with collar 02AZC291
Magnetic Stands
SERIES 7
360°
7011BN
7010S
12.7
Bush
SPECIFICATIONS
Mitutoyo's Magnetic Stands accept all dial
indicators and dial test indicators. The On-Off
switch offers instant mounting and dismounting
without any adverse effect to the indicators or
workpiece surface.
ø8
112
513-907
232
232
165
177
Stem hole ø9.53
(3/8”)
ø10
ø12
ø12
Unit: mm
20
431
136
Stem hole
ø9.53 (3/8”)
360°
(ø34)
280°
7012-10
M8×1.25
6
7031B
6
50 (W) ×60 (D)
7019
7032B
7.5
12.7
6.5
150°
7033B
7032B
0°
19
ø6
ø9.53
ø6
7014-10 / 7014E-10
No magnet force On/Off
8
64
Dovetail
ø8
SPECIFICATIONS
360°
352
（382）
55
°
220
360°
Ball-joint
(Move freely)
24
143
320°
ø6
ø30
138
Clamp Knob
Dovetail
ON/OFF Lever
7033B
7033B
381 (481)
55
102
7031B
50
150°
Order No.
7010S
7011BN
7011S-10
7012-10
7014-10
7014E-10
7031B
7032B
7033B
Description
Magnetic stand
Magnetic stand
Magnetic stand
Magnetic flexi-stand
Mini magnetic stand
Mini magnetic stand
Universal magnetic stand
Universal magnetic stand
Universal magnetic stand
Applicable holding stem dia.
Dovetail groove
ø6mm, ø8mm*, ø9.53mm (3/8”)
—
ø6mm, ø8mm*, ø9.53mm (3/8”)
—
ø4mm, ø8mm, ø9.53mm (3/8”)
—
ø6mm, ø8mm*, ø9.53mm (3/8”)
—
ø6mm, ø8mm
Provided
ø6mm, ø8mm*, ø9.53mm (3/8”)
Provided
ø6mm, ø8mm, ø9.53mm (3/8”)
Provided
ø6mm, ø8mm, ø9.53mm (3/8”)
Provided
ø6mm, ø8mm, ø9.53mm (3/8”)
Provided
*Supplied with collar 02AZC291
7033B
F-61
Remarks
—
With fine adjustment
With fine adjustment
For dial test indicator
Without magnet ON/OFF
Without magnet ON/OFF
With mechanical locking system
With mechanical locking system
With mechanical locking system
Dial Gage Stands
SERIES 7
FEATURES
Optional Accessories
101461: Hardened-steel flat anvil
101462: Hardened-steel serrated anvil
101463: Hardened-steel domed anvil*
*Not available for 7007-10.
14
• Dial Gage Stands are designed for
• Vertical fine adjustment is available with
comparison measurements of size using a dial one-touch control thanks to the parallel
indicator or Digimatic Indicator.
spring suspension.
• Anvil of 7001-10 and 7002-10: ø58mm
Anvil of 7007-10: 90mm square
φ58
No.101462
14
14
Hardened steel
φ58
φ58
No.101461
7002-10
(with ø58mm flat anvil)
14
SPECIFICATIONS
7007-10
(with 90mm square anvil)
Metric
Order No.
7001-10
7002-10
7007-10
ø58
Stem hole
ø8mm, ø9.53mm
ø8mm, ø9.53mm
ø8mm, ø9.53mm
Remarks
With serrated anvil (101462)
With flat anvil (101461)
With square anvil
ø58
Mass(g)
4
4
5
DIMENSIONS
ø30
Unit: mm
80
Column clamp
Fine adjustment
205
160
50
Stem hole
with Bush: ø8
without Bush: ø9.53
Indicator clamp
Anvil
Flatness: 1.3µm
45
ø58
168
110
80
7001-10, 7002-10
Column travel: 0 - 95mm
Column clamp
Fine adjustment
Stem hole
with Bush: ø8
without Bush: ø9.53
205
160
50
ø30
Anvil
Flatness: 1.3µm
Indicator clamp
45
90
168
110
F-62
ø32
SR20
14
7001-10
(with ø58mm serrated anvil)
7007-10
Column travel: 0 - 90mm
No.101463
Hardened steel
ø58
11
26
Hardened steel
Transfer Stands
SERIES 519
FEATURES
• Transfer Stands are designed for comparison
measurements of size using a dial indicator or
Digimatic Indicator.
Optional Accessories
14
101461: Hardened-steel flat anvil
101463: Hardened-steel domed anvil
φ58
No.101462
14
14
Hardened steel
φ58
φ58
No.101461
14
14
ø32
SR20
ø58
ø58
No.101463
11
26
Hardened steel
519-109-10
(with a serrated anvil)
ø58
Hardened steel
SPECIFICATIONS
Metric
Order No.
519-109-10
Stem hole
ø8mm, ø9.53mm
Remarks
With serrated anvil (101462)
DIMENSIONS
Unit: mm
80
Stem hole
without Bush ø9.53
with Bush ø8
430
385
50
ø30
Anvil
Flatness: 1.3µm
45
ø58
Column travel: 0 - 320mm
168
F-63
Granite Comparator Stands
SERIES 215
FEATURES
• Easy maintenance due to the non-rusting
base.
• The rigid granite base is free from burrs and
pileups due to its fine-grain composition
and less viscousness compared with casting
iron. The flatness is always accurate and the
workpiece is free from damage.
Optional Accessories
21JAA329: ø8mm bush
21JAA330: ø9.53mm bush
21JAA331: ø15mm bush
only available for 215-156-10
215-156-10
215-153-10
215-151-10
SPECIFICATIONS
Order No. Granite base size (W x D x H) Column travel
Stem hole
Remarks
215-151-10
150 x 200 x 50mm
250mm
ø8mm, ø9.53mm With fine adjustment of 1mm range
215-153-10
200 x 250 x 80mm
260mm
ø8mm, ø9.53mm With fine adjustment of 1mm range
ø8mm, ø9.53mm,
215-156-10
300 x 250 x 80mm
275mm
With fine adjustment over the entire travel
ø20mm
DIMENSIONS
ø40
80
60
Indicator
clamp
Indicator
clamp
Base
Flatness: 3.5µm
Base
Flatness: 3µm
46
80
50
41
200
250
150
215-151-10
Column travel: 0 - 250mm
200
215-153-10
Column travel: 0 - 260mm
ø50
Column clamp
400
100
115
Stem hole
without Bush ø20
with Bush ø9.53
with Bush ø8
Indicator clamp
80
Base Flatness: 3.5µm
51
215-156-10
Column travel: 0 - 275mm
300
Column
clamp
Fine adjustment
Stem hole
with Bush ø8
without Bush ø9.53
Column
clamp
300
50
Fine adjustment
Stem hole
with Bush ø8
without Bush ø9.53
Unit: mm
95
320
ø30
250
F-64
Comparator Stands
SERIES 215
FEATURES
• The 215-505-10 model has a threaded
column which enables easy and precise
coarse adjustment.
• Serrated anvils 110×110mm are supplied
with 215-405-10, and 150×150mm
with 215-505-10 models.
• Comparator Stands have a stable, cast-iron
base which enables precise measurement.
• The partially serrated anvil prevents flat
workpieces from wringing to it and the
2.3µm flatness (or better) promotes accurate
measurement.
Application example using Digimatic
Indicator ID-H.
215-405-10
SPECIFICATIONS
Order No.
215-405-10
Square anvil size (W x D)
110 x 110mm
215-505-10
150 x 150mm
Column travel
Stem hole
Remarks
235mm
ø8mm, ø9.53mm
With fine adjustment of 1mm range
ø8mm, ø9.53mm,
275mm
With fine adjustment over the entire travel
ø20mm
* Perpendicularity of the mounting hole to the anvil: less than 0.4mm/100mm
Optional Accessories
21JAA329: ø8mm bush*
21JAA330: ø9.53mm (3/8”) bush*
21JAA331: ø15mm bush*
DIMENSIONS
ø40
Unit: mm
95
Fine adjustment
Column clamp
Stem hole
without Bush ø9.53
with Bush ø8
320
60
* Only available for 215-505-10.
110
Indicator clamp
Anvil
Flatness: 2.3µm
54
215-405-10
Column travel: 0 - 235mm
134
201
115
Column clamp
Stem hole
without Bush ø20
with Bush ø9.53
with Bush ø8
Anvil215-405
150
SCAL2.3µm
1/2
Flatness:
400
100
ø50
Indicator clamp
64
215-505-10
Column travel: 0 - 275mm
255
179
F-65
Precision Granite Stands (with black granite bases)
SERIES 517
FEATURES
Mitutoyo's Granite Comparator Stands
are basic building blocks for the assembly
of special purpose, precision measuring
equipment. By mounting precision measuring
instruments such as Digimatic indicators,
Mu-Checker Cartridge Heads and Linear
Gages on the stands, it is possible to satisfy
all manners of measuring assignment. The
rigid granite base is free from burrs, pileups
and rust, thereby preventing deterioration
over time.
Optional Accessories
012580: Holder for Lug-Back indicator
517-892
517-891
SPECIFICATIONS
Order No.
Base
517-890
517-891
517-892
517-893
517-895
517-896
517-897
517-898
517-899
6 x 8”
6 x 8”
6 x 8”
6 x 8”
8 x 12”
8 x 12”
8 x 12”
8 x 12”
8 x 12”
Column
Diameter
1.181”
1.181”
1.181”
1.181”
1.181”
1.181”
1.181”
1.181”
1.181”
Column
Height
6”
8”
12”
18”
6”
8”
12”
18”
24”
Holder for Lug-Back indicators
(optional accessory)
(Height) Fine Adjustment
Knob
F-66
Throat
Clearance
4.375”
4.375”
4.375”
4.375”
5.8”
5.8”
5.8”
5.8”
5.8”
Table
Flatness
.0001”
.0001”
.0001”
.0001”
.0001”
.0001”
.0001”
.0001”
.0001”
Table
Thickness
2”
2”
2”
2”
2”
2”
2”
2”
2”
Weight
18 lbs
19 lbs
20 lbs
21 lbs
29 lbs
30 lbs
31 lbs
32 lbs
35 lbs