HOW TO APPLY AGRI-CAL
AGRI-CAL can be applied with conventional ground spray equipment, as an
aerial application or through irrigation systems.
Agri-Cal can be tank mixed with nitrogen solutions, and most soil applied
herbicides. No extra trips across the feld are generally needed. (Always do a
jar test for compatibility)
Derived From: Calcium Chloride
NET WEIGHT 11.08 LBS. / GAL (1.32kg/L)
MIXING INSTRUCTIONS
1. PUT 1/3 OF WATER IN TANK.
2. ADD CORRECT AMOUNT OF AGRI-CAL.
3. ADD OTHER CHEMICALS OR FERTILIZER IF ANY.
4. FILL TANK WITH BALANCE OF WATER AND AGITATE UNTIL MIXED.
GENERAL RECOMMENDATIONS
Agri-Cal is intended as a supplement only and should be used in
conjunction with a standard fertility program.
Agri-Gro Marketing, Inc. (F682)
HC 4 Box 333
Doniphan, MO 63935
Soil Application: 2 - 5 gallons AGRI-CAL per acre. preplant or preemerge
Foliar Application: (Specialty Crops Only) 1 - 3 gallons per acre .Use
minimum of ten parts water to one part Agri-Cal.
To improve Nitrogen absorption AGRI-CAL should be used at 2 - 5 gallons
per acre with all Liquid N applications.
□ 55 U.S. GALLONS (208.45 LITERS)
NET WEIGHT 609.4 LBS.
□
275 U.S. GALLONS (1,042.25 LITERS)
NET WEIGHT 3,047 LBS.
DO NOT MIX WITH ANY ROUND-UP® TYPE HERBICIDES
(GLYPHOSATE BASED)
Information regarding the contents and
levels of metals in this product is
available on the internet at
http://www.aapfco.org/metals.htm