ECO-INVIZILITE LED
INVLED-3 3” Spacing
INVLED-4 4” Spacing
Flexible Concealed Linear Lighting
FEATURES
•
•
•
•
•
•
•
•
•
24 VDC
Three light colors:
- 2,700°K ±50°K, CRI 90, 170 lm per socket
- 3,000°K ±50°K, CRI 90, 170 lm per socket
- 4,000°K ±50°K, CRI 80, 170 lm per socket
600W/25amp max.
MLV dimmable
Each socket contains an overheat sensor
Five (5) year warranty
Available with sockets installed at 3” or 4” O.C. in
factory-cut in per-foot lengths or in kits with 100’
LED sockets easily removed or relocated
UL/C-UL Listed for damp location
CABLE
•
•
•
•
•
Two-conductor black cable (proprietary patent
pending)
LED sockets pre-installed at 3” or 4” O.C.
Flexible cable conforms easily to fit tight radii and
sharp turns; lights confined coves and restrictive
spaces
Includes double sided tape and mounting ear
Must install with: INVPW1 (or covered wire nuts) and
INVDE1
ACCESSORIES
•
•
•
•
Extruded clear polycarbonate mounting track with
pre-drilled holes; sockets snap in easily without tools
Powder-coated, formed aluminum reflector with
pre-drilled holes (use with INVLED-EXT)
Extruded frosted acrylic lens snaps easily onto track
(INVLED-EXT) without tools
See pages 2 and 3 for a complete accessory list
DRIVERS
•
•
•
•
•
•
D-133
D-134
D-135
D-136
D-137
D-157
24VDC
24VDC
24VDC
24VDC
24VDC
24VDC
Project Notes
A Division of Troy-CSL
20w magnetic driver
40w magnetic driver
60w magnetic driver
100w magnetic driver
150w magnetic driver
300w magnetic driver
CUT-TO-LENGTH - PER FOOT
24VDC 2.5W per socket
•
•
•
INVLED-3-27-2
INVLED-3-30-2
INVLED-3-40-2
2,700°K ±50K, 90 CRI, 3” OC
3,000°K ±50K, 90 CRI, 3” OC
4,000°K ±50K, 80 CRI, 3” OC
•
•
•
INVLED-4-27-2
INVLED-4-30-2
INVLED-4-40-2
2,700°K ±50K, 90 CRI, 4” OC
3,000°K ±50K, 90 CRI, 4” OC
4,000°K ±50K, 80 CRI, 4” OC
100-FOOT-LENGTH-KITS
24VDC, 2.5W per socket
4 Power Feeds, 4 Dead Ends and Mounting Screws included
•
•
•
INVLED-3-27-100-2
INVLED-3-30-100-2
INVLED-3-40-100-2
2,700°K ±50K, 90 CRI, 3” OC
3,000°K ±50K, 90 CRI, 3” OC
4,000°K ±50K, 80 CRI, 3” OC
•
•
•
INVLED-4-27-100-2
INVLED-4-30-100-2
INVLED-4-40-100-2
2,700°K ±50K, 90 CRI, 4” OC
3,000°K ±50K, 90 CRI, 4” OC
4,000°K ±50K, 80 CRI, 4” OC
14508 Nelson Avenue City of Industry, CA 91744 Tel 626-336-4511 Fax 626-336-4266 www.csllighting.com
Rev 021616
Eco-Invizilite LED
Accessories
Mounting Track
• Extruded clear
polycarbonate mounting
track with pre-drilled
holes; sockets snap in
easily without tools
a”
12”
INVLED-EXT
48" Extruded Mounting Track, Clear Polycarbonate
x”
x”
INVLED-EXT45
48" – 45° Mounting Track, Clear Polycarbonate
Reflectors
• Powder-coated, formed
aluminum reflector with
pre-drilled holes
(use with INVLED-EXT)
v”
12”
INVLED-KICK-BK
INVLED-KICK-BZ
INVLED-KICK-WT
Black
48" Kick Reflector
Bronze
Powder-coated, Formed-Aluminum
White
Lens
• Extruded frosted acrylic
lens snaps easily onto
track (INVLED-EXT)
without tools
w”
1s”
INVLED-LENS-1
A Division of Troy-CSL
48" Extruded Lens, Frosted Acrylic
14508 Nelson Avenue City of Industry, CA 91744 Tel 626-336-4511 Fax 626-336-4266 www.csllighting.com
Eco-Invizilite LED
Accessories
Terminal Block with Cover
14"
14"l x d"w x m"h
d"
m"
• 30A terminal block with hinged lid
• 10 AWG max.
• Clear, high-grade polycarbonate
INVPW1
Terminal Block with Cover
INVPW1-10
Terminal Block with Cover, 10-pack
End-Feed Wiring Compartment
4"l x 28"w x 1"h
28"
• Joins connection from transformer to Eco-Invizilite
cable within box at start of run
• 16-gauge galvanized steel
• Meets UL2108 UL Codes
4"
1w"
INVWC1
End-Feed Wiring Compartment
Metal Three-Way Wiring Compartment
5d"l x 22"w x 1"h
22"
• Multi -use wiring compartment for start of run,
or for "L" or "T" connection within run
• 16-gauge galvanized steel
• Meets UL2108 UL Codes
5d"
1w"
INVWC2
Metal Three-Way Wiring Compartment
Low-Profile Wiring Compartment
4"l x 28"w x 1"h
• Joins connection from transformer to
Eco-Invizilite cable within box at start of run
28"
4"
1"
• 16-gauge galvanized steel
• Low-profile, 1" high
• Meets UL2108 UL Codes
INVWC3
Low-Profile Wiring Compartment
Dead End Cap
1v"l x d"w x 4"h
• Dead end termination
1v"
• Snaps over end of cable without tools
4"
d"
• Double-sided tape and mounting ear with
screw included for installation
• Clear, high-grade polycarbonate
INVDE1
Dead End Cap
INVDE1-10
Dead End Cap, 10-pack
Cable Clip
1X”
1x"l x 18"w x 4"h
8”
• Secures cable to surface between sockets
set far apart
• Installs with pre-att ached, double-sided tape,
or screws down through pre-drilled screw hole
• Clear, high-grade polycarbonate
A Division of Troy-CSL
INVCL-10
Cable Clip, 10-pack
INVCL-100
Cable Clip, 100-pack
14508 Nelson Avenue City of Industry, CA 91744 Tel 626-336-4511 Fax 626-336-4266 www.csllighting.com
4”