SECURITY LIGHTERS
The Induction Security Lighter Series can be used in a variety of applications including parking
lots, parks, area lighting, gardens, and security areas. It is ideal for areas of high security and
safety, producing a high S/P ratio that increases visibility levels. Its cast aluminum housing
provides superior corrosion resistance. These systems operate well in cold temperatures with an
Instant On/re-strike capability and are suitable for use in wet locations (IP55). The long life and
superior lumen maintenance of induction significantly reduce maintenance costs and provide a
considerable reduction in the total cost of ownership.
APPLICATIONS
• Parking Lots
• Buildings
• Area Lighting
• Parks
• Gardens
• Security Areas
• Intended to Replace HID
ELECTRICAL
• Universal Voltage (120V – 277V)
• High Power Factor (>.95)
• Ambient Temperature Rating: -4°F to 104°F
-20°C to 40°C
• Input Frequency: 50/60 Hz
• Constant Wattage Output With Less Than 3% Variance
• Operating Frequency: 250 kHz
• Generator Type: Class P Type 1 Outdoor
• THD %: <10%
• Instant On
• No Noise Compared to HID Systems
• No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
• Pre-Wired Output Connector (Plug and Play)
CHARACTERISTICS
• Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
• Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
• Wide Range of Color Temperature Options Available: 2700K – 6500K1
• Pre-Wired Input Connector
• CRI > 80
• Vibration and Shock Resistant: No Filament
COMPLIANCE
• UL listed – UL 1598 (E363375)
• cUL listed – UL 1598 (E363375)
• FCC Part 18-A
• Surge Immunity – IEC 61000-4-5: Class 4
CONTACT FULHAM CLIENT SERVICES FOR:
• Luminaires with a full range of lamp color temperatures between 2700K – 6500K
• Lamps specifically designed for use in extreme cold applications or environments
• Dimming options
• Replacement components (generators & lamps) also sold separately
• Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
• Five-year limited warranty available for Induction Lighting System. See page 43.
1
Consult with your sales representative for availability.
fulh
www.fulham.com
am.c
BASIC COLLECTION - SECURITY LIGHTER SERIES
SL01
OPTICS
• Die Cast Aluminum Reflector Hood
• Acrylic Hood, High Heat Resistance
• Type V Distribution
CONSTRUCTION
• Die Cast Aluminum Housing
• Corrosion Resistant
• Low Profile Design
• Aluminum Finish Housing
• Generator IP55 Rated
• Powder Coated White
Generator (Standard)
• Pole Mounted (Diameter 1.57")
• Preinstalled Photocell Receptacle
(Photocell NOT included)
IP RATING
• Generator IP55: Suitable for Wet Location
LAMP TYPE/WATTAGES
• Circular Induction Lamp Available:
40W1, 70W1, 80W, 100W
• Bulb Induction Lamps Available:
35W1, 55W1, 85W
SECURITY DISC INDUCTION GENERATOR
NOTE: 1Consult with your sales representative for availability.
CIRCULAR INDUCTION
40W - 100W
BULB INDUCTION
35W - 85W
MOUNTING HEIGHT
8' to 20'
ORDERING OPTIONS
TYPE
SERIES
DESCRIPTION
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
WATTAGE
C = CIRCULAR
040 = 40W
070 = 70W1
080 = 80W
100 = 100W
LENS
COLOR TEMP
A = ACRYLIC
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
1
ACCESSORIES
ACCESSORIES
LAMP
SL = SECURITY
LIGHTER
01 = 01 SERIES
B = BULB
035 = 35W1
055 = 55W1
085 = 85W
Example: SL-01-C040-A (Security Lighter, 01 Series, Circular, 40W, Acrylic Lens, 5000K)
Example: SL-01-B085-A-60 (Security Lighter, 01 Series, Bulb, 85W, Acrylic Lens, 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323
599 5000
fulham.com
27
(323) 599-5000