with Technique Solutions
Tool Drop Prevention System
2nd Edition
DID YOU
KNOW...
• ‘Hit by Falling Object’ incidents are the 2nd highest
cause of death in the workplace?
• Every 10 minutes there is a recordable incident due
to a dropped object.
From Safework Australia
‘PCBUs must manage the risks associated with an
object falling on a person if it is reasonably likely to
injure the person. Adequate protection must be
provided to minimise the risk and protect the person.
When managing risks, the risk must be eliminated,
so far as is reasonably practicable.’
Dont Risk It
!
y
a
d
o
T
s
l
o
o
T
r
u
o
y
Tether
Index
Tool Attachment Points
4
Tool Lanyards
10
Wrist Bands
14
Tool Belts
15
Tool Holsters
16
Tool Pouches
20
Drop Safe Kits
24
Drop Contol Buckets
28
Working At Heights
30
TOOL ATTACHMENT
POINTS
Python D-Ring
D-Ring Attachment Points are used together with Quick
Wrap and Heat Shrink to create attachment points for a
huge collection of tools. D-Rings come in a wide variety
of sizes, and are each third-party load-rated.
Code
Max Load
Dimensions
H01000
0.9kg
12mm x 55mm
H01001
2.7kg
25mm x 90mm
Non Conductive D-Ring
Code
H01002
Max Load
Dimensions
0.9kg
12mm x 55mm
Double D Ring
The Dual D-Ring is an attachment point that
allows almost any tool up to 0.9kg to be tethered
safely, and also allows for 100% Tool Tie-Off
during the transfer of tools. With 100% Tool
Tie-Off, a tool can be transferred without
the risk of a falling object.
Code
4
HO1003
Python D-Ring Cord
The Python D-Ring Cord easily cinches to tools weighing under
2.25kg, creating an instant attachment point for many tools.
Code
H01020
Dimensions
2.25kg
Python Quick Wrap Tape
Made from a self-fusing silicone rubber, Python Safety Quick
Wrap Tape is capable of creating instant attachment points
for nearly any tool in a matter of seconds. Quick Wrap Tape
conforms to the shape of whatever it is applied to, making
it ideal for even the most irregular shaped tools. Quick Wrap
Tape has a temperature range of -54°C to 260°C.
•
•
•
•
Self-fusing silicone rubber doesn’t deface tools
Creates instant attachment points for nearly
any tool in seconds.
Conforms to the shape of whatever it is applied to.
Provides a third party tested and rated tool attachment when used with Python D Rings
Code
H01010
Dimensions
25mm x 2.75m
5
TOOL
ATTACHMENT
POINTS
Python Heat Shrink
After using Python Quick Wrap Tape and D-Rings to create
an attachment point, Heat Shrink can be used to create an even
stronger connection that is extremely resistant to abrasives and harsh
environments. Links shrink 300% in size, while an inner adhesive
securely fastens itself to whatever is being wrapped.
Available in several sizes, and varying lengths.
Code
Product
Dimensions
H03000
Link Size
19mm x 45mm
H03001
Link Size
25mm x 45mm
H03002
Link Size
38mm x 51mm
H03003
Link Size
38mm x 76mm
H03004
Link Size
51mm x 100mm
H03005
Link Size
76mm x 100mm
H03009
Heat Gun Applicator
Heat Gun Applicator
6
Python Quick Spin
– Texta Combo
Texta combo includes Texta Cap,
Holder and Permanent Marker
Code
HO1044
Python Quick Spins
Python Safety Quick Spins make tools tether-ready in seconds. Quick Spins are available in many sizes
to accommodate a wide selection of tools including screwdrivers and many pliers.
Code
Load Rating
Common Uses
H01040
0.5kg
Small Ratchets, Small Pliers, Markers, Snips, Allen Key, Magnetic Retrievers, and more...
H01041
0.5kg
Pliers, Markers, Snips, Small Flashlights, Heat Sticks, Ratchets, Digital Micrometers, and more...
H01042
0.5kg
Flashlights, Heat sticks, Ratchets, Pliers, Digital Micrometers, Digital Gauges, and more...
H01043
0.5kg
Flashlights, Files, Heat Sticks, Ratchets, Pliers, Digital Micrometers, Paint Brushes, and more...
7
TOOL
ATTACHMENT
POINTS
Quick Ring Pliers
Code
H01034
Dimensions
2.25kg
Python Quick Rings
Python Quick Rings are an economical
solution for making tools tether-ready quickly.
Python Safety Quick Ring Pliers can be
purchased separately for easier and faster
Quick Ring installation.
Code
Max Load
Dimensions
H01030
0.9kg
19mm dia
H01031
2.7kg
25mm dia
H01032
2.7kg
38mm dia
8
Tool Cinch Attachments
Python strongest attachment point yet… Tool Cinch Attachment Points feature
a unique cinch design that allows users to quickly secure even the most difficult to tether
tools, and continue their work. Simply cinch the tool, and secure the stabilization wings
using Quick Wrap Tape or Heat Shrink to create an instant attachment for nearly any tool.
Code
Description
Load Rating
H01052
Tool Cinch Dual Wing
15.9kg
Common Uses
Pinch Bars, Sledge Hammers, Slogging Wrenches
H01051
Tool Cinch Single Wing
15.9kg
Power and Air Tools with triggers
H01050
Tool Cinch
15.9kg
Closed handle tools (without triggers)
Micro D Ring
Designed to be used on devices such as cell phones,
small cameras, radios, and other small electronics,
the Micro D-Ring adheres to most surfaces, creating
attachment points in a matter of seconds.
• Low profile keeps the Micro D-Ring out of the way.
• Ready to use in seconds, cures completely in 24 hours.
• Heavy-duty industrial grade double stick tape adheres to most surfaces
• Flexible notched surface allows the Micro D-Ring to attach to curved surfaces.
Code
HO1035
9
TOOL LANYARDS
Tool lanyards and tethers suitable for virtually any tool including
hard hats, radios, hand tools and even tools weighing up to 36kg!
•
•
•
•
Developed exclusively for tool drop prevention.
Third party tested and certified
Coil Lanyards feature nylon coated stainless
steel braid for maximum longevity
Screw gate karabiner options prevent
accidental opening
Tool Coil Lanyard
Python patent pending 2.3kg rated Coil Tether is the perfect
tethering solution for many tools. An extra-thick PU coating around
the coil prevents kinking and allows the coil to retain its form.
Suitable for use from holsters, belts, harnesses and tool pouches
alike, the 2.3kg rates tether is a versatile solution that is both
resistant to heat and to sharp objects. Lightweight aluminum
karabiners on either side of the extension feature locking
screw-down nuts that cannot be removed.
2.3 kg Rated
Load Rating
2.3 kg
Stretched Length
157.5 cm
Relaxed Length
12.7 cm
Code
H01060
0.9 kg Rated
Tool Coil Lanyard
A must for work site safety. Tested and proved.
Easily clips onto belt. Suitable for many tools.
Code
10
K01050
Load Rating
0.9 kg
Stretched Length
99 cm
Relaxed Length
8.9cm
Code
H01062
Hard Hat Tether
Vinyl-coated braided steel cable facilitates use in the harshest
work environments. Heavy-duty steel industrial clip with simple
flip-up snap allows for easy one-handed operation. Tail with loop
makes the Hard Hat Tether easy to attach to any hard hat.
Compact design keeps the tether out of the way when not in use.
Load Rating
0.5 kg
Stretched Length
99 cm
Relaxed Length
8.9cm
Code
H01065
Python Coil Tether – Wristband
The compact design of this tether makes it the perfect for use with
Wristbands. Vinyl coated braided steel allows the tether to perform well
around heat and sharp objects, while also making clean-up/decontamination
easy. Trigger snaps on both sides of the lanyard make connecting to
attachment points effortless, even while wearing safety gloves.
Load Rating
2.3 kg
Stretched Length
45 cm
Code
H01061
Hammer Coil Tether
Designed to be used with hammers and the
Python Safety Hammer Holster, the Hammer
and Long Handled Tool Lanyard is the ideal
tether for longer length tools.
Vinyl-coated braided steel makes the tether
durable, easy to clean, and work well around
heat. The locking karabiner with extra-large
screw lock gate makes for easy use with
work gloves and the screw locking nut
cannot be removed. Vinyl Coated Braided
Steel Coil is resistant to heat and sharp objects.
Extra-thick P.U. Coating resist kinking and
maintains coil memory after extensive use
in the field.
Electronic
Equipment
Coil Tether
The Electronic Equipment
Coil Tether provides a quick
and secure solution to
tethering cameras, cell
phones, radios, and other
small objects. This lanyard
combines perfectly with
the Micro D-Ring to create
drop prevention solutions
for items that otherwise
are very difficult to tether.
Code
Load Rating
0.9 kg
Stretched Length
157 cm
Code
H01064
HO1063
11
RETRACTABLE
TOOL LANYARD
Stag Retractable Tool Lanyard - Lockable
Secure your tools with confidence!
•
•
•
•
•
•
•
•
•
Strong 1.2m Kevlar cord – quiet smooth running and extremely strong
Suited for tools up to 4.5kg
Click-Connect feature allows you to tethers your tools rapidly and with ease
Click-Connect buckle allows for rapid exchanging between multiple tools
Rust and weather resistant hardware including high grade stainless steel spring, screws and gear loop
360 degree rotation
Durable polycarbonate case – weather and impact resistant
Innovative locking system allows you to keep gear tethered to the desired length
Safety breakaway end fitting will disengage from
unit at approx. 11kg’s of force. Made in USA
Code
Description
H01121
Stag Retractable Tool Lanyard with Click-Connect Buckle
H01121AC
Click-Connect Buckle
Kwik-Lok Retractable
Tool Lanyard
Self-setting Kwik-Lok inertia mechanism sets desired
lanyard length up to 122cm ABS thermoplastic
housing for ultimate durability Modular
quick connecting buckle for exchanging
multiple tools.Maximum safe
working capacity: 1 lbs. (0.46 kg)
Code
H01125
Kwik Connect Buckle
Steel Cable Retractor
Modular quick connecting buckle for
exchanging multiple tools
Replacement retractor for a number of Python Safety tool
holsters, tool pouches, wristbands and other products.
Code
12
H01126
Load Rating
0.7 kg
Length
132 cm
Code
H01120
Webbing Trigger Tool Lanyards
Used in combination with Python D-Rings and Quick Rings,
Double Trigger Tool Lanyards are an economical tethering solutions
for most hand tools. Pull down on the trigger to open the
dual-hooked connector, then release once latched
to a tool. Double Trigger Tool Lanyards
come in varying lengths, and are
third-party load-rated for 4.5kg’s.
Code
Load Rating
Common Uses
H01067-30
4.5kg
30cm Tool Lanyard
H01067-60
4.5kg
60cm Tool Lanyard
H01067-90
4.5kg
90cm Tool Lanyard
Elasticized Bungee Tool Lanyard
4.5 kg Rated
The Elasticised Bungee Tether is a very versatile tool
at height extension that can be used with virtually
anything under 4.5kg’s, including spud wrenches,
scaffold wrenches, adjustable wrenches, etc.
Load Rating
4.5 kg
Stretched Length
129.5 cm
Relaxed Length
78.5cm
Code
H01075
15.9 kg Rated
The Elasticised Bungee Tool Tether, is third-party load rated for
tools up to 15.9kg’s. Built from a custom abrasion-resistant webbing,
this tools at height lanyard is built for durability and longevity.
A twist-lock karabiner makes this bungee easy to use, even while wearing gloves.
Load Rating
15.9 kg
Stretched Length
132 cm
Relaxed Length
78cm
Code
H01074
Webbing Tool Lanyard
36.6 kg Rated
Heavy-duty nylon twist multifilament bonded thread with
aluminium double-action twist-lock hook 30kn Karabiner.
Load Rating
36.6 kg
Dimensions
25mm x 1.8m
Code
HO1076
13
WRIST BANDS
Slim Pullaway Wrist Band
Pullaway Wristbands from Python Safety use an elastic band that allows
the wristband to conform to the user’s wrist size. These wristbands are
designed so that they can be escaped from in an emergency situation.
Easily tether off tools using the sewn on D-Ring Available in three sizes.
Code
Size
Load Rating
H01080-S
Small
2.3kg
H01080-M
Medium
2.3kg
H01080-L
Large
2.3kg
Wide Pullaway Wrist Band
Pullaway Wristbands from Python Safety use an elastic
band that allows the wristband to conform to the user’s
wrist size. These wristbands are designed so that they
can be escaped from in an emergency situation.
Easily tether off tools using the sewn on D-Ring
Available in three sizes.
Code
Size
Load Rating
H01085-S
Small
2.3kg
H01085-M
Medium
2.3kg
H01085-L
Large
2.3kg
Adjustable Wristband
Heavy-duty paracord easily cinches to any tool under 2.3kg
• Wristband adjusts in size with hook and loop
• 50mm wide elastic webbing
Code
Description
Load Rating
H01081
With Cord
2.3kg
H01084
With D-Ring
2.3kg
Adjustable Wristband with Retractor
Adjustable wristband with a replaceable Stainless
Steel Retractor with an attached trigger.
• Wristband adjusts in size with hook and loop
• 50mm wide elastic webbing
Code
H01082
Load Rating
0.7kg
14
TOOL BELTS
Wrist Bands
Tool Belts from Python are designed
with tool drop prevention in mind.
All Python Safety Tool Belts are compatible
with Python belt loops such as allowing
for greater customization. A wide selection
of tool belt holsters, tool lanyards, and
tool pouches are also compatible with
Python tool belts.
• A drop prevention tool belt system
that’s both durable and comfortable.
• Designed with a modular approach allowing
the user to customize their own personal
holster and pouch setup.
•
Premium heavy-duty outer shell constructed
with 1050 ballistic denier fabric and high
density webbing coats an inner high-density
foam core providing both strength and comfort.
Product Code
Waist Size
H01117-S
28" - 32"
H01117-M
32" - 36"
H01117-L
36" - 40"
H01117-XL
40" - 44"
H01117-2XL
44" - 48"
H01117-3XL
48" - 52"
Belt Loop D-Ring
Compatible with all Python Tool Belts, the D-Ring
Belt Loop Attachment creates an instant attachment point
that is third-party load-rated for 2.3kg.
Code
H01118
Belt Loop Trigger
Compatible with all Python Tool Belts, the Belt Loop
Trigger creates an instant staging point that is third-party
load-rated for 2.3kg. A thumb release steel trigger snap
allows for quick tool transfers while maintaining a secure
connection, even while wearing work gloves.
Code
H01119
Call 1300 187 100
www.techniquesolutions.com.au
15
PYTHON TOOL HOLSTER
Adjustable Radio Holster
Single Tool Holster
The Python Adjustable
Radio Holster is specially designed
to adjust perfectly to the size of
virtually any portable radio, as
well as other small devices such
as cell phones and cameras.
A unique mounting system allows
the holster to attach easily to
harnesses and tool belts.
The Single Tool Holster
for the Belt has a built
in D-Ring, as well as a
pouch for an optional
retractor. The inside of
the holster is lined with
a hard body wear guard
to create a long-lasting
easy feed system.
Code
HO1112
Code
HO1130
Bottle/Spray Can Holster
Dual Tool Holster
Neoprene holster with a side-release composite buckle.
Adjustable strap allows the holster to conform to the size
of your water bottle. Comes included with a 7-70 mm
aluminium karabiner. Commonly used with water bottles,
spray paint cans, and other aerosol spray cans.
The Dual Tool Belt Holster comfortably accommodates two
hand tools in a compact, user friendly design that includes
innovative product features like Beacon™ Hi-Vis Reflectors
and a water drainage vent.
Code
Code
HO1113
16
HO1133
RS
Purpose designed drop prevention tool holsters that accommodate most hand tools.
Like all of the Python product range, these holsters are built specifically for drop prevention,
and have connection points for tool lanyards or built in, load-rated retractors.
Whether you need to holster a tape measure, pliers, hammer, handheld radio, wrench,
or even a water bottle, we have the right holster for the job.
Hammer Holster
Code
HO1134
Tape Measure Sleeve
For optimal performance, the Hammer Holster
should be used with the Python Hammer Lanyard.
D-Rings are located on both sides of the holster
allowing for the user to tether their tool however
they prefer. A Hook and loop closure strap protects
hammers from accidental drops during transport,
but keeps the tool available when in use.
Code
HO1132
The Python Tape Measure Sleeve is constructed from a
heavy duty neoprene material that conforms to the size of
nearly any tape measure and is designed to be used with
the Tape Measure Retractor Holster (sold separately),
or on it’s own using a belt clip on the back of the sleeve.
Extra Deep Tool Holster
Constructed from a premium heavy duty
ballistic denier fabric and high density
webbing, the Extra-Deep Single Tool Holster
is engineered to withstand punishing
environments.
The 200mm x 80mm pocket is capable
of storing many larger hand tools.
D-Rings on both sides of the holster are
load-rated for 2.2kg each, allowing the
user to decide how to best tether a tool.
The holster is equipped with the Beacon™
locator system, Quick-Mag™ tool staging
system, and a drainage vent.
Code
HO1135
17
PYTHON
TOOL HOLSTERS
with built in Retractors
Spanner Holster with Retractor
Python Safety Box Wrench Holsters are built with an internal magnet,
allowing for quick tool access while also protecting your tool from
accidental drops. Tools commonly used with include: Box Spanners,
Combination Spanners, Scaffold Keys....and many other thin profile tools.
Code
H01114
Dual Tool Holster
with Retractors
Constructed from a premium heavy duty
ballistic denier fabric and high density
webbing, the Dual Tool Holster for the
belt is engineered to withstand
punishing environments.
Two heavy-duty 25mm D-Rings are
built into both sides of the holster and
are load-rated for 2.3kg. Two replaceable
retractors are included in a pocket on
the front of the holster.
Code
HO1110
D-Ring Load Rating
2.3 kg
Retractor Load Rating
0.7 kg
Retractors Included 2
Single Tool Belt Holster
with Retractor
The Single Tool Holster has a built in D-Ring and retractor. The inside of the
holster is lined with a hard body wear guard to create a long-lasting easy feed
system. Constructed from a premium heavy-duty ballistic denier fabric,
this holster is engineered to withstand punishing environments.
Code
18
HO1111
100% SECURE. 100% OF THE TIME
Scaffold Wrench Holster
with Retractor
The Python Scaffold Wrench Holster offers a rear
feed retractor system that allows the worker to
safely work off of the belt with the added convenience of a retractable lanyard that is rated for
0.7kg. D-Rings on the holster allow heavier tools
to be secured using a tool lanyard. A pull down
security strap prevents the scaffold wrench from
leaving the holster during transit.
Code
H01114B
Tape Measure Holster
with Retractor
The Tape Measure Retractor Holster is designed to be used
with the Tape Measure Sleeve. Together, these products allow
tape measures to be quickly tethered and holstered.
A retractor feeds through the back of the holster and can be
connected to a D-Ring on a Python Tape Measure Sleeve.
D-Rings on both sides of the holster allow for an alternative
means of tethering the Tape Measure Sleeve.
Code
H01118
Polsch Holster
with Retractor
1050 denier body with hard-body insert
provides maximum durability in harsh
environments. Replaceable retractor with
rear feed system. Fits any belt up to 80mm
Code
H01115
Load Rating
0.7kg
Call 1300 187 100
www.techniquesolutions.com.au
19
TOOL POUCHES
Tools Pouch
The Python Tool Pouch comes in two sizes,
with three variants of each size. Constructed
from a heavy duty canvas, with an inner
lining to help prevent punctures, this rugged
tool pouch is engineered to last.
Multiple inner pockets accommodate a
number of tools, while built in D-Rings
makes tethering tools incredibly easy.
Optional retractor
and D-Ring
Cords are also
available.
Code
HO1097
HO1098
2.25 kg
2.25 kg
Hook and Loop
Magnetic Strip with Side Release Buckle
Width
19 cm
22 cm
Height
27.9 cm
33 cm
Depth
12.7 cm
12.7 cm
D-Ring Load Rating
Closure System
Utility Pouch
• Side-release closure system
• Two welded D-Rings on front of pouch
• One additional D-Ring inside pouch
• Two pockets for tools inside the pouch
• Belt loop on back of pouch
• Heavy-duty 22 oz duck canvas
• 2 side ears are perfect for holding
podge wrenches
Code
20
H01095
Tool Pouch with D-Ring & Retractors
Attachment Points D-Ring Load Rating Retractor Load Rating Closure System Width Height Depth Code
D-Ring + 2 Retractors
2.27 kg
0.7 kg
Hook & Loop System
19 cm
27.9 cm
12.7 cm
HO1200
Tool Pouch with D-Ring & Triggers
Attachment Points D-Ring Load Rating Closure System Width Height Depth Code
D-Ring + 2 Triggers
2.27 kg
Hook & Loop System
19cm
27.9cm
12.7 cm
HO1205
Extra Deep Tool Pouch with
D-Ring & Retractors
Attachment Points D-Ring Load Rating Retractor Load Rating Closure System Width Height Depth Code
D-Ring + 2 Retractors
2.27 kg
0.7 kg
Magnetic Strip with Side Release Buckle
22.2 cm
33 cm
12.7 cm
HO1201
Extra Deep Tool Pouch with
D-Ring & Triggers
Attachment Points D-Ring Load Rating Closure System Width Height Depth Code
D-Ring + 2 Triggers
2.27 kg
Magnetic Strip with Side Release Buckle
22.2cm
33 cm
12.7 cm
HO1206
21
TOOL POUCHES
Small Parts Pouch
Designed with Drop Prevention in mind, the patented Python
Small Parts Pouch stops accidental drops the moment something
is put inside. With an innovative self-closure system that traps
objects inside, the pouch makes it nearly impossible for objects
to fall out once placed in the bag, while making it easy for
retrieval by the user since no opening or closing is necessary.
Code
Description
H01090
Nylon Yellow
H01091
Vinyl Yellow
H01092
Canvas Black
H01094
Extra Deep Canvas Black
Small Parts Pouch - Usage
Pic 1
Pic 2 Pic 3 The Small Parts Pouch is ideal for nuts bolts screws and nails
Items are placed inside the pouch, at which point they are immediately secured by the self closure system
Even when the pouch is flipped vertically, the closure system traps objects
inside making virtually impossible for them to fall out
• Fits easily onto most tool belts and can easily be fitted to harnesses with an included Karabiner
• Vinyl option are easy to wipe clean and ideally suited to oily environments
• ‘Reach in’ retrieval means no opening or closing is necessary
Inspection Pouch
The Python Inspection Pouch is designed
for the safe transport and use of most
multi-meters, air monitors, and other
portable testing devices.
A unique adjustable opening can be used
to create a hands-free work station off
the hip or chest.
22
2
3
1
Three Tool Pockets inside the pouch are perfect
for tools and testing probes. Tools can be tied
off to a D-Ring inside the pouch, or a D-Ring
located on either side of the back of the pouch.
The Inspection Pouch has been designed to
be word off the belt, or over the shoulder
with an included shoulder strap.
Code
HO1210
23
SCAFFOLDERS KITS
Stag Attitude Drop Safe Kit
The Stag Attitude Scaffolders Belt and Tool Kit includes 7 quality tools that are complete with certified attachment points.
•
•
•
•
Knipex Nips with Python Quick Ring Technique DropGuard 12” Spanner with Quick Ring
Technique Tape Measure with Python Quick Ring
2 x Python Wrist Bands with Python Lanyards attached with Quickwrap Tape and Heat Shrink
• Big Ben Magnetic Level with Python Bungee Lanyard
• Technique 21x24 Scaffolders Ratchet with Python Quick Ring
• 24mm Technique Scaffold Spanner with Python Quick Spin
• Technique Scaffold Hammer with Python D Ring
Code
KO2015
DROP SAFE KITS
Kit 1
10 Tool Safety Package
Code
H01400
• 1pc x H01040 PYTHON Quick Spin Adaptor Small
• 1pc x H01041 PYTHON Quick Spin Adaptor Medium
• 1pc x H01042 PYTHON Quick Spin Adaptor Large
• 1pc x H01043 PYTHON Quick Spin Adaptor XLarge
• 3pc x H01000 PYTHON D-Ring Attachment 12mm x 55mm
• 3pc x H01001 PYTHON D-Ring Attachment 25mm x 90mm
• 1 x H01052 PYTHON V Ring Tool Cinch Dual Wing Attachment
• 2 x H01075 PYTHON Elasticised Tool Bungee Tether 4.5kg
• 1 x H01010Y PYTHON Quick Wrap Heavy Duty 2.5cm x 274cm Yellow
• 1 x H01080-M PYTHON Pullaway Wristband Slim Profile Medium
• 1 x H01067-30 PYTHON Webbing Eco Tool Lanyard 4.5kg 30cm
• 1 x H01097 PYTHON ool Pouch With D Ring
24
Python Drop Safe Kit
– 100% Secure 100% of the time!
Totally designed with Tool Drop Prevention in mind this tool kit represents
a major breakthrough in Tool Height Safety for scaffolders.
Engineered so that 100% tool security is accomplished every tool in this Kit is fully tethered 100%
of the time! This is achieved using a combination of built in retractable lanyards and certified Python Lanyards
•
•
•
•
•
•
•
Technique 21x24 Scaffolders Ratchet with Python Quick Ring and secured with Built in Retractor
Technique DropGuard 12” Spanner with Quick Ring and secured with Built in Retractor
Axis Claw Hammer with Python D Ring attached with Quickwrap Tape and Heat Shrink
and Secured with Python Hammer Lanyard
Code
Technique Tape Measure with Python Quick Ring and secured with Built in Retractor
24mm Technique Scaffold Spanner with Python Quick Spin and secured with Built in Retractor
Knipex Nips with Python D Ring and secured with Built in Retractor
Big Ben Magnetic Level secured with Python Bungee Lanyard
KO2018
25
DROP SAFE KITS
Kit 2
40 Tool Safety Package
• 2pc x H01040 PYTHON Quick Spin Adaptor Small
• 2pc x H01041 PYTHON Quick Spin Adaptor Medium
• 2pc x H01042 PYTHON Quick Spin Adaptor Large
• 2pc x H01043 PYTHON Quick Spin Adaptor XLarge
• 5pc x H01000 PYTHON D-Ring Attachment 12mm x 55mm
• 5pc x H01001 PYTHON D-Ring Attachment 25mm x 90mm
• 1 x H01052 PYTHON V Ring Tool Cinch Dual Wing Attachment
• 2pc x H01020 PYTHON D-Ring Attachment with Cord
• 3 x H01075 PYTHON Elasticised Tool Bungee Tether 4.5kg
• 1 x H01060 PYTHON HD Hook2Hook Coil Tether 2.3kg Rated
• 2 x H01010Y PYTHON Quick Wrap Heavy Duty 2.5cm x 274cm Yellow
• 2 x H01080-M PYTHON Pullaway Wristband Slim Profile Medium
• 2 x H01067-30 PYTHON Webbing Eco Tool Lanyard 4.5kg 30cm
• 1 x H01098 PYTHON Tool Pouch Extra Deep with D Rings 33cm x 22cm
• 1pc x H01063 PYTHON Tool Coil Lanyard 0.9kg Rated, Clip + Loop
• 1 x H01090 PYTHON Small Parts Pouch Nylon Yellow
• 1pc x H01035 PYTHON Micro D-Ring with Adhesive
• 25pc x H01031 PYTHON Quick Rings 25mm
Code
26
18
H01403
Kit 3
60 Tool Safety Package
• 10pc x H01000 PYTHON D-Ring Attachment 12mm x 55mm
• 10pc x H01001 PYTHON D-Ring Attachment 25mm x 90mm
• 2 x H01052 PYTHON V Ring Tool Cinch Dual Wing Attachment
• 5pc x H01020 PYTHON D-Ring Attachment with Cord
• 2 x H01075 PYTHON Elasticised Tool Bungee Tether 4.5kg
• 2 x H01060 PYTHON HD Hook2Hook Coil Tether 2.3kg Rated
• 4 x H01010Y PYTHON Quick Wrap Heavy Duty 2.5cm x 274cm
• 2 x H01080-M PYTHON Pullaway Wristband Slim Profile Medium
• 2pc x H01040 PYTHON Quick Spin Adaptor Small
• 2pc x H01041 PYTHON Quick Spin Adaptor Medium
• 2pc x H01042 PYTHON Quick Spin Adaptor Large
• 2pc x H01043 PYTHON Quick Spin Adaptor XLarge
• 2 x H01067-30 PYTHON Webbing Eco Tool Lanyard 4.5kg 30cm
• 1 x H01098 PYTHON Tool Pouch Extra Deep with D Rings 33cm x 22cm
• 1 x H01090 PYTHON Small Parts Pouch Nylon Yellow
• 25pc x H03002 PYTHON Shrink Link 38mm x 51mm
• 1pc x H01035 PYTHON Micro D-Ring with Adhesive
• 1pc x H01063 PYTHON Tool Coil Lanyard 0.9kg Rated, Clip + Loop
• 25pc x H01031 PYTHON Quick Rings 25mm
• 1 x H01121 STAG Retractable Tool Lanyard with Locking Feature
Code
H01406
27
DROP
CONTROL
BUCKETS
Safe Buckets
Python Safe Buckets are third-party load rated,
and have a strong bottom that prevents piercing.
Available in both canvas and vinyl variations, Safe Buckets
are able to be used in many work environments.
All Safe Buckets have built in closure systems that
help prevent dropped objects.
•
•
•
•
Built in closure system is perfect for dropped
object prevention
Strong composite base prevent piecing
Vinyl options are easy to wipe clean and ideally
suited to oily environments
Multiple inner attachment points
Dimensions 31cm x 38cm
Code
Load Rating
Closure System
Body Material
H01100
45kg
Velcro
Canvas
H01101
81kg
Velcro
Vinyl
H01102
113kg
Velcro
Vinyl
H01103
45kg
Drawstring
Canvas
H01104
113kg
Drawstring
Vinyl
H01103
H01101
28
18
Hard Body Safe Bucket Insert
The Python Hard Body Bucket insert converts the standard
soft body Safe Bucket into a hard body bucket with four inner
pockets for staging tools and small parts. The insert can be
removed and reused, and is compatible with all standard
Python Safe Buckets.
Code
H01109
Drop Control Mats
Heavy duty drop control mats with a 50mm edge.
.
Available in a range of sizes. Lightweight and very functional.
Roll or fold up for storage. Fire retardant option available
29
Code
Size
H01300
120cm x 120cm
H01302
120cm x 900cm
WORKING AT HEIGHTS
GLOVES
Turbinator – The ultimate working at heights glove
Purpose designed for use when working at height on steel structures and wind turbines and the Turbinator
is windproof, weather resistant, has amazing grip and includes hexagonal gel memory patches for total
grip control and vibration absorption.
Features : –
–
–
–
–
Gecko Grip Silicone palm surface grip creates an amazingly strong and long lasting grip
Hexagonal Memory Gel patches absorbs vibrations
Neoprene Material provides breathability and ventilation
Inherent wind, water and sun resistance to help with longevity
and durability
Adjustable Elastic Short Cuff ensures a snug fit while glove is in us
Uses
Scaffolding
Rigging
Wind-Energy Industry
Impact & Power Tools
Drilling
Code
30
18
S21540
Boxx – built for handling everything including heights!
Ideally suited to tasks where you can afford to slip this versatile and ultra-lightweight glove has an amazing silicone
Ripple Grip® palm for maximum control on both wet and dry surfaces. A reinforced saddle adds durability, while
two-way stretch spandex on back of glove ensures a snug and breathable fit. Hexagonal Memory Gel® in base
of palm adds vibration and impact absorption.
Features:
–
–
–
–
–
Gecko Grip Silicon Ripple Palm: maximizes grip control for wet and dry surfaces.
Reinforced Saddle: adds durability in high-wear areas.
Two-Way Stretch Spandex: ensures a snug,
breathable and comfortable fit.
Terry Cloth Back on Thumb: absorbs moisture
to keep hand dry, or for wiping brow.
Adjustable Short Cuff: ensures a snug
fit while glove is in use.
Uses
Scaffolding
Rigging
Construction
Industry
Code
S21545
Tow Grip Hexx – Tough glove with a soft heart
Engineered to provide maximum comfort and protection in warmer environments this glove not only protects
the back of your hand, fingers and thumb from impact, puncture and cuts, its oil resistant palm is provides
excellent grip in the oiliest work areas.
Features:
–
–
–
–
–
–
–
Uses
Code
Direct Injection TPR on back of hands and fingers for impact protection
Tacky palm Gecko Grip Silicone Surface texture for amazing grip.
Stretchy Spandex on back of hand for comfort and breathability
Curved fingers promote hand and finger flexibility
Double Kevlar stitched palm for added durability
Kevlar saddle insert protect traditional wear point
Ventilation prevents bacteria
Oil/Gas
Mining
Demolition
Fracking
Heavy industry
S21520
31
Dont Risk It
!
y
a
d
o
T
s
l
o
o
T
r
u
Tether yo
Technique Solutions Pty
Victoria – Head Office
15 Steele Crt, Tullamarine Vic 3043
Ph: 1300 187 100 Fax: 1300 270 601
Email: [email protected]
New South Wales
P.O. Box 6681, Silverwater NSW 2128
Ph: 1300 187 100 Fax: 1300 270 601
Email: [email protected]
South Australia
P.O. Box 2006, Regency Park SA 5010
Ph: 1300 187 100 Fax: 1300 270 601
Email: [email protected]
Western Australia
P.O. Box 3008, Malaga WA 6090
Ph: 1300 187 100 Fax: 1300 270 601
Email: [email protected]
Queensland
P.O. Box 577, Burleigh Heads QLD 4220
Ph: 1300 187 100 Fax: 1300 270 601
Email: [email protected]
www.techniquesolutions.com.au