Permanent and Welding Magnets
Rotor Magnets
•
•
•
Diameter
(Inch)
3/4
1
Height
(Inch)
1/2
3/4
Material: Alcomax III
Can be used in temperatures up to 212ºF
Commonly used in synchronous motors, dynamos, air turbines and generators
Pull
(lbs)
4
16
Hole Diameter
(Inch)
0.218
0.250
Code
381100
381101
Diameter
(Inch)
1-1/4
Height
(Inch)
3/4
Pull
(lbs)
25
Hole Diameter
(Inch)
0.250
Code
MAGNETICS
Permanent Magnets
381102
Round Bar Magnets
•
•
•
Diameter
(Inch)
1/8
3/16
Material: Alcomax III
Can be used in temperatures up to 1022ºF
Commonly used in reed switches, sump plugs, school/educational sets, stirrer bars
Length
(Inch)
4
5
Pull
(lbs)
0.35
0.75
Diameter
(Inch)
1/4
19/64
Code
381105
381106
Length
(Inch)
6
1
Pull
(lbs)
1.40
1.10
Code
381107
381108
Insulated Pot Magnets
•
•
•
Diameter
(Inch)
1/4
3/8
1/2
Material: Alcomax III
Can be used in temperatures up to 428ºF
Commonly used in gripping/lifting, positioning jigs, inserting into jigs/fixtures, in catches/latches
Height
(Inch)
1/2
1/2
1/2
Pull
(lbs)
0.25
1.43
2.50
Thread Size
Code
6-32
6-32
6-32
381110
381111
381112
Diameter
(Inch)
3/4
1
Height
(Inch)
3/4
1
Pull
(lbs)
9.13
16.00
Thread Size
Code
10-24
1/4-20
381113
381114
Magnetic Foot
•
•
•
Length
(Inch)
2-23/64
Height
(Inch)
1
Material: Alcomax III (magnet), mild steel (pot)
Can be used in temperatures up to 428ºF
Rectangular block containing two pot type magnets set into one mild steel housing
Width
(Inch)
1
Weight
(lbs)
0.7
Max. Pull
(lbs)
26
Code
381117
1011
Toronto: 1-800-387-3127
08_SectionF_pgs1005-1018_may2812.indd 1011
Montréal: 1-800-363-7862
Edmonton: 1-866-440-4326
www.kar.ca
[email protected]
6/18/2012 11:02:04 AM
Permanent and Welding Magnets
MAGNETICS
Permanent Magnets
Deep Pot Magnets
Material: Alcomax III (magnet), mild steel (body), aluminium (spacer)
Can be used in temperatures up to 428ºF
Shallow flux field, best suited for gripping on smooth, thin surfaces
•
•
•
Diameter
(Inch)
3/8
1/2
11/16
Height
(Inch)
19/32
5/8
5/8
Max. Pull
(lbs)
2
4
6
Thread Size
Code
M3
M4
10-32
381120
381121
381122
Diameter
(Inch)
13/16
11/16
13/16
Height
(Inch)
3/4
1
13/16
Max. Pull
(lbs)
9
14
44
Thread Size
Code
10-32
10-32
10-32
381123
381124
381125
Shallow Pot Magnets
Material: Alcomax III (magnet), mild steel (body)
Can be used in temperatures up to 1022ºF (except 3/4 Dia. 212ºF)
Uses are similar to standard pot magnets use where height is a restriction
Shallow flux fields best suited for gripping on smooth surfaces
•
•
•
•
Diameter
(Inch)
3/4
1-1/8
Height
(Inch)
5/16
11/32
Screw Head
(Inch)
5/32
13/64
Max. Pull
(lbs)
7-1/2
11
Code
381130
381131
Diameter
(Inch)
1-1/2
Height
(Inch)
13/32
Screw Head
(Inch)
16/64
Max. Pull
(lbs)
28-1/2
Code
381132
Button Magnets
•
•
•
Diameter
(Inch)
Height
(Inch)
1/2
3/4
1
3/8
1/2
5/8
Material: Alnico
Can be used in temperatures up to 1022ºF
Ideal for use on rough surfaces because of their deeper flux field
Slot Size
Min.-Max.
(Inch)
5/32-9/32
7/32-11/32
7/32-11/32
Max. Pull
(lbs)
Code
1-1/2
4
8
381135
381136
381137
Diameter
(Inch)
Height
(Inch)
1-1/4
7/8
1
3/4
Slot Size
Min.-Max.
(Inch)
5/16-1/2
3/16-3/16
Height
(Inch)
1-3/8
Width
(Inch)
5/8
Max. Pull
(lbs)
Code
11
8
381138
381139
Max. Pull
(lbs)
8
381142
Pocket Magnets
•
•
•
Length
(Inch)
7/8
Height
(Inch)
1
Material: Alnico
Can be used in temperatures up to 1022ºF
Useful where air gaps are present due to deep flux field
Width
(Inch)
1-1/8
Max. Pull
(lbs)
5
Code
381141
Length
(Inch)
1-1/16
Code
1012
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
08_SectionF_pgs1005-1018_may2812.indd 1012
6/18/2012 11:02:04 AM
Permanent and Welding Magnets
Power Magnets
•
•
•
Length
(Inch)
1-3/8
1-9/16
1-3/4
2-1/4
Height
(Inch)
3/4
1
1-3/16
1-3/8
Material: Alcomax
Can be used in temperatures up to 1022ºF
Commonly used for attracting, holding, clamping, and securing
Width
(Inch)
3/4
1
1-3/16
1-3/4
Max. Pull
(lbs)
10
19
26
52
Code
381145
381146
381147
381148
Length
(Inch)
2-3/4
3-1/8
2-3/8
3-1/8
Height
(Inch)
1-5/8
2-1/8
1-9/16
2-1/8
Width
(Inch)
2-1/4
3-1/4
2-7/16
3-3/8
Max. Pull
(lbs)
81
104
77
132
Code
MAGNETICS
Permanent Magnets
381149
381150
381151
381152
Minor Magnets
•
•
•
Depth
(Inch)
5/16
Height
(Inch)
7/16
Material: Alnico
Can be used in temperatures up to 1022ºF
Educational use as well as inspection magnet, holding stencils/point masks
Width
(Inch)
7/8
Max. Pull
(lbs)
3
Code
381155
Power Pot Magnets
•
•
Extremely powerful holding strength
Provided with push-off screw to remove work from magnetic hold
Diameter x Height
(Inch)
1-3/4 x 1-3/4
2-1/8 x 2-1/8
Magnetic
Pull
(lbs)
50
70
Code
425563
425564
Diameter x Height
(Inch)
2-3/4 x 2-5/8
Magnetic
Pull
(lbs)
150
Code
425565
Notched Alnico Round Bar Magnets
•
Diameter x Height
(Inch)
1/4 x 13/16
Permanent Alnico bar magnets are notched to show direction of polarity
Magnetic
Pull
(oz)
1.2
Code
Diameter x Height
(Inch)
425566
2-1/8 x 2-1/8
Magnetic
Pull
(oz)
1.0
Code
425567
1013
Toronto: 1-800-387-3127
08_SectionF_pgs1005-1018_may2812.indd 1013
Montréal: 1-800-363-7862
Edmonton: 1-866-440-4326
www.kar.ca
[email protected]
6/18/2012 11:02:05 AM
Permanent and Welding Magnets
Permanent Magnets
MAGNETICS
Pocket Horseshoe Alnico Magnets
•
•
Small but powerful magnet
For retrieving small steel parts and screws from hard to get at places
Magnetic
Pull
(lbs)
1
Size
(oz)
3/4
Code
Size
(oz)
425568
1
Magnetic
Pull
(lbs)
2-1/4
425569
Length
(Inch)
3
425571
Code
Rectangular Bar Magnets
•
Section
(Inch)
5/8 x 3/8
If placed end-to-end, can be built up in multiples to any length
Length
(Inch)
2
Code
425570
Section
(Inch)
5/8 x 3/8
Code
Pot Type Magnets
•
•
Unique combination of strong magnet with insulating ring gives this magnet the superior holding power of larger ones
1/4-20 threaded hole for attaching to fixtures and machines
Diameter x Height
(Inch)
11/16 x 5/8
13/16 x 3/4
Magnetic
Pull
(lbs)
6
10
Code
Diameter x Height
(Inch)
425534
425535
1-1/16 x 1
1-3/8 x 1-3/4
Magnetic
Pull
(lbs)
18
35
Code
425536
425537
Button Type Magnets
•
•
•
Many applications including magnetic fastening, displays, bulletin boards, etc
Center hole for easy fastening
Supplied with fastener
Diameter x Height
(Inch)
3/4 x 1/2
1 x 5/8
Magnetic
Pull
(lbs)
4
6-1/2
Code
Diameter x Height
(Inch)
425577
425578
1-1/4 x 3/4
1-1/2 x 7/8
Magnetic
Pull
(lbs)
14
18-1/2
Code
425579
425580
Magnetic Quick Clamp
•
•
•
Base
(Inch)
3-1/2
Height
(Inch)
2-1/2
Designed to enable fast and accurate holding of ferrous metals for welding and assembly jobs
The quick clamp will hold sheet and tube at angles of 180°, 75°, 60°, 45°, and 30°
The through-body hole enables this new magnetic tool to be built into jigs or to be hung up when not in use
Length
(Inch)
4
Code
425581
1014
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
08_SectionF_pgs1005-1018_may2812.indd 1014
6/18/2012 11:02:05 AM
Permanent and Welding Magnets
Welding Links
•
•
•
Size of Block
(Inch)
2x1x1
For holding steel plates in position for welding, brazing, and soldering
Eliminates need for clamps or temporary fastening
Constructed from two heavy duty Alnico magnetic blocks linked together with strong steel bars and wing nuts
Weight
(oz)
1-1/2
Code
425562
Magnetic Holder
MAGNETICS
Welding Magnets
•
Contains powerful Alcomax magnetic material
• The holder provides the welder with a powerful, rigid support on flat and round components at various angles during
welding and welding preparation applications
• The magnetic holder is switchable and can be partially energised
Length
(Inch)
4-1/4
Height
(Inch)
5-1/2
Width
(Inch)
4-1/4
Pull
(lbs)
220
Code
381160
Magnetic Variable Clamp
•
•
Length
(Inch)
7-11/16
Height
(Inch)
7-7/8
Designed for fast accurate holding of ferrous sheets and tubes for welding and assembly work
Maximum operating temperature up to 248ºF
Width
(Inch)
7/16
Weight
(lbs)
1
Pull
(lbs)
44
Code
381162
Magnetic Quick Clamps
•
•
•
Length
(Inch)
4
Height
(Inch)
2-9/16
The Eclipse magnetic quick clamp is designed to facilitate fast and accurate holding of ferrous metals
Quick clamps are also suitable for retrieval applications
Maximum operating temperature up to 176ºF
Width
(Inch)
1/2
Weight
(lbs)
0.66
Pull
(lbs)
22
Code
381165
Length
(Inch)
4
Height
(Inch)
2-9/16
Width
(Inch)
13/16
Weight
(lbs)
0.88
Pull
(lbs)
33
Code
381166
Earth Welding Clamp
•
•
This magnetic clamp allows quick and easy ground for most steel welding operations
Designed to provide ground on large welding operations where croc-clip or G-clamps cannot be easily used
Width
(Inch)
Height
(Inch)
Thickness
(Inch)
Pull
(lbs)
3-1/4
5-1/8
1-13/32
110
Max.
Current
(amps)
350
Code
381168
1015
Toronto: 1-800-387-3127
08_SectionF_pgs1005-1018_may2812.indd 1015
Montréal: 1-800-363-7862
Edmonton: 1-866-440-4326
www.kar.ca
[email protected]
6/18/2012 11:02:06 AM
Permanent and Welding Magnets
Permanent Magnets
MAGNETICS
Magnetic Strips
Material: Strontium Ferrite
Supplied in sheet, strip and adhesive backed finishes
Can be cut with scissors
Can be used in temperatures up to 176ºF
•
•
•
•
Plain - Flexible Magnetic Strip
Width
(mm)
9.5
11.0
Thickness
(mm)
3.6
4.6
Length
(m)
10
10
Width
(mm)
7.5
12.5
20.0
Thickness
(mm)
0.75
0.75
0.75
Length
(mm)
10
10
10
Code
381170
381171
Width
(mm)
15.0
9.5
Thickness
(mm)
6.4
3.6
Length
(m)
10
2
Code
381172
381173
Adhesive Backed Flexible Magnets
Code
381175
381176
381177
Width
(mm)
13.0
9.5
150 sq.
Thickness
(mm)
0.50
3.60
0.75
Length
(mm)
1
150
150 sq.
Code
381178
381179
381180
Welding Magnets
Mitre Clamps
•
•
Length
of Base
Face
(Inch)
6
Length
of Top
Face
(Inch)
2-3/4
Provides effective and inexpensive method of clamping components
Mitre clamps provide the welder with a simple means of clamping flat or round ferrous components
Height
(Inch)
Width
(Inch)
Pull
(lbs)
Code
1-3/4
1-5/8
250
381181
Length
of Base
Face
(Inch)
7
Length
of Top
Face
(Inch)
3-3/4
Height
(Inch)
Width
(Inch)
Pull
(lbs)
Code
1-3/4
1-5/8
150
381182
Heavy Duty Variable Clamp
• Provides the user with the means to clamp components during welding, fabrication and assembly applications with the
added benefit of 88 lb. clamping force, enabling larger components to be clamped with ease
• Settings from 45º to 90º
Length
(Inch)
5-1/2
Height
(Inch)
5-1/2
Width
(Inch)
1-3/8
Weight
(lbs)
3
Pull
(lbs)
88
Code
381184
1016
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
08_SectionF_pgs1005-1018_may2812.indd 1016
6/18/2012 11:02:06 AM
Permanent and Welding Magnets
Magnetic 90° Fixed Clamps
Two magnetic faces in a rigid 90º angle for jigging on sheets, pipes and tubes
Fixed 90º clamps provide a fast and cost effective means of clamping components rigidly at 90º angles during
fabrication, assembly and weld preparation applications
•
•
Length
(Inch)
5-1/2
8-55/64
Height
(Inch)
5-1/2
8-55/64
Width
(Inch)
1-3/8
55/64
Weight
(lbs)
3
5
Pull
(lbs)
88
165
Code
381186
381187
Length
(Inch)
11-13/16
Height
(Inch)
11-13/16
Width
(Inch)
1-3/8
Weight
(lbs)
10
Pull
(lbs)
441
Code
MAGNETICS
Welding Magnets
381188
Magnetic Positioners
The magnetic positioner is a heavy duty unit consisting of two magnetic blocks connected by two non-magnetic
steel straps
The blocks contain high performance Alcomax 3 magnetic material
Magnetic on two faces ON/OFF switch located at each end
•
•
•
NOTE: 381190 is a single unit
Length
(Inch)
Height
(Inch)
Width
(Inch)
8-7/64
2-1/2
3
Max. Pull Max. Pull
on Flat
on V’d
Face
Face
(lbs)
(lbs)
249
229
Code
Length
(Inch)
Height
(Inch)
Width
(Inch)
381189
2-1/2
2-1/2
2
Max. Pull Max. Pull
on Flat
on V’d
Face
Face
(lbs)
(lbs)
249
229
Code
381190
Permanent Magnets
Neodymium Iron Boron Discs - Rare Earth
•
•
•
Diameter
(Inch)
0.250
0.250
0.375
0.375
0.500
Pressure-formed (sintered) magnets have ten times the strength of alnico magnets
Nickel-plated magnets offer corrosion resistance
Temperature range -40ºF to +300ºF, unless noted otherwise
Thickness
(Inch)
0.250
0.500
0.250
0.500
0.250
Code
381191
381192
381193
381194
381195
Diameter
(Inch)
0.500
0.750
1.000
1.000
Thickness
(Inch)
0.500
0.375
0.250
0.500
Code
381196
381197
381198
381199
1017
Toronto: 1-800-387-3127
08_SectionF_pgs1005-1018_may2812.indd 1017
Montréal: 1-800-363-7862
Edmonton: 1-866-440-4326
www.kar.ca
[email protected]
6/18/2012 11:02:07 AM