AE-9
Concert
Loudspeaker System
Description:
The AE-9 is a bi-amped, three-way
system offering exceptional power
handling, smooth frequency response,
and predictable directional control. It
can be easily positioned in spaces that
are too small for other horn-loaded
systems, and is fully arrayable.
Engineering Data:
Driver Complement:
Low Frequency: One Apogee 15"(381mm) permanent magnet conetype driver is treated with a waterproofing compound, providing
resistance to moisture, and enabling long-term stability of cone
resonance and cone mass parameters
Format:
Bi-amped/Three-way/Electronically-coupled
Dispersion:
H: 60° x V: 40°
Mid Frequency: One Apogee 10"(254mm) midrange cone driver is
treated with a waterproofing compound (SX only*)
Frequency Response (1m on axis):
High Frequency: One Apogee 1"(25mm) compression driver
tweeter is treated with Ferrofluid® for greater power handling
capability, lower distortion, and control of short-term impedance rise
Max. SPL (@1m):
44 Hz to 20 kHz ±3 dB
127 dB cont./133 dB peak
PTML (peak transient mechanical limit):
Compatible Processors:
144 dB
DLC24 Digital Controller
Sensitivity (1W @ 1m):
Input Connectors:
Neutrik™ NL4MP Speakon™ connectors standard; Cannon EP series
and gas-tight barrier strips optional
LF: 98 dB/44 Hz to 300 Hz
MF & HF: 101.5 dB/300 Hz to 17 kHz
Nominal Impedance:
8 ohms, each driver
Handles:
Ten handles designed as an integral part of the enclosure (no
moving parts)
Max. Power Handling:
Grille:
LF: 600W cont./2400W peak
MF: 400W cont./1600W peak
HF: 75W cont./300W peak
Powder-coated, diamond-punched steel with acoustic foam covering
Dimensions:
Trim:
front: 22"(559mm) W x 38"(965mm) H
rear: 15"(381mm) W x 38"(965mm) H
depth: 23"(584mm) D
Optional protective steel pieces on top and bottom ends; powdercoated for durability
Weight:
Rigging Hardware:
Six 12-gauge steel nutplates, mounted three on top and three on
bottom, recessed, nominally flush; accepts 3/8"-16 thread (10mm
nutplate or Aeroquip Pan fittings optional); nutplates are backed
with 12-gauge steel internal brackets
Finish:
Textured high-strength black epoxy paint; other colors optional
Enclosure Type:
20° trapezoidal, fully horn-loaded, vented bass
Cabinet Construction:
Multi-ply birch with stainless steel fasteners
* SX weather treatment for harsh environments
145 lb. (65.8 kg)
Polar Measurements AE-9 (6 dB/division, normalized)
0°
330°
300°
60°
270°
90°
120°
240°
150°
0°
330°
30°
300°
60°
90°
270°
120°
240°
150°
210°
330°
30°
300°
60°
90°
270°
120°
240°
150°
210°
210°
180°
180°
180°
62.5 Hz
125 Hz
250 Hz
0°
0°
0°
330°
30°
300°
60°
90°
330°
30°
270°
dB/
DIV
10 dB/division
0°
30°
Frequency Response AE-9 (with controller)
300°
60°
330°
30°
90°
270°
300°
60°
90°
270°
20
120°
240°
120°
240°
120°
50
100
200
500
1K
2K
5K
10K
20K
240°
Hz (Frequency)
150°
150°
210°
150°
210°
210°
180°
180°
180°
500 Hz
1,000 Hz
2,000 Hz
0°
0°
0°
330°
30°
330°
30°
Measured in a free-field anechoic environment using a swept one-third octave input.
330°
30°
Processor Notes:
300°
60°
90°
270°
120°
240°
150°
210°
300°
60°
90°
270°
120°
240°
150°
210°
300°
60°
90°
270°
120°
240°
150°
210°
180°
180°
180°
4,000 Hz
8,000 Hz
16,000 Hz
H
All polar measurements obtained in a freefield environment at 10° increments.
The DLC24 Digital Loudspeaker Controller is a digital engine with an analog
surface. It combines the most advanced technology available with intuitive
interfaces to provide the key elements that ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed
installation applications.
The controller provides factory-set equalization curves to smooth the
response, protective limiting, and active crossovers (for bi-amplified models
and subwoofers).
Dimensional Drawings AE-9 (dimensions in inches and millimeters)
www.apogee-sound.com
Specifications subject to change without notice. 55-0027-01C
©2017 Bogen Communications, Inc. 1703