* REFERENCES *
Antonio B. et al., “Mixed Finite Elements for the Elasto-plastic Analysis of 2D
Continua,” European Congress on Computational Methods in Applied Sciences and
Engineering, July 2004, pp. 441-459.
Bangash M. Y. H., “Finite Element Modeling of Concrete Structures”, Concrete and
Concrete Structures – Numerical Modeling and Applications, 1989, Elsevier Applied
Science, pp. 145-165.
Changhua Y., “Stability and Dynamic Analyses of Cooling Towers,” Journal of the
Power Division, Vol. 99/2, Nov., 1973, pp. 339-347.
Cirak F. et al., “Subdivision Surfaces: A New Paradigm For Thin-Shell Finite-Element
Analysis,” California Institute of Technology, Pasadena, CA 91125, USA, Aug., 2000,
pp. 110-119.
Day R. A. and Potts D. M., “Curved Mindlin Beam and Axisymmetric Shell Elements –
A New Approach,” International Journal for Numerical Methods in Engineering,
Vol.30, Apr., 1990, pp. 1263-1274.
Defaux G. and Heinfling G., “Reliability of Natural-Draught Hyperbolic Cooling Towers
Using a 3-D Finite Element Analysis Coupled with Probabilistic Methods,” 8th ASCE
Specialty Conference on Probabilistic Mechanics and Structural Reliability, 2000, pp.
339-352.
Djermane M. et al., “Nonlinear Dynamic Analysis of Thin Shells Using a Finite Element
with Drilling Degrees of Freedom,” International Journal of Applied Engineering
Research, Vol. 2.1, 2007, pp. 97–108.
Eckstein U. et al., “Simulation of Static and Kinetic Buckling of Un-Stiffened and
Stiffened Cooling Tower Shells,” Engineering Structures, Vol. 9/1, Jan., 1987, pp. 9-18.
Elias Z. M., “Mixed Finite Element Method for Axisymmetric Shells,” International
Journal for Numerical Methods in Engineering, Vol. 4, Jan., 1972, pp. 261-277.
Engelmann B. E.; Whirley R. G.; Goudreau G. L., “A Simple Shell Element formulation
for Large-Scale Elasto-plastic Analysis,” Structural Mechanics Technical Conference,
USA, July 1989.
Grafton P. E. and Strome D. R., “Analysis of Axisymmetric Shells by the Direct
Stiffness Method,” AIAA Journal, Vol. 2, No.3, Oct., 1963, pp. 304-332.
Gurfinkel G., “Analysis and Design of Hyperbolic Cooling Towers,” Journal of the
Power Division, Vol. 98/1, June 1972, pp. 133-152.
Hedao H. R., “Ph. D. Thesis” from College of Engineering, Pune; Series of Test Results
Conducted at Regional Engineering College, Nagpur – 2008.
Ibrahimbegovic A., “Finite Elastoplastic Deformation of Membrane Shells,” Engineering
Computations, Vol.-13, 1996, pp. 13-27.
Ibrahimbegovic A., “Finite Elasto-Plastic Deformation of Membrane Shells,”
Engineering Computations, Vol. 13, 1996, pp. 122-142.
IS 800:1984 Code for Practice for General Construction in Steel, pp. 91-92
IS 875-III: 1987 Code for Practice for Design Loads (Other than Earthquake) for
Buildings and Structures, pp. 11-31
Itaru M., Shiro K., Chiba Y., “Alternative Lower Bounds Analysis of Elastic Thin Shells
of Revolution,” Engineering Computations, Vol.-13, 1996, pp. 41–75.
Jacob R., “Flexural Response of a Rectangular Section with Tension Reinforcement,”
CE, Spring, Vol. - 18/2, 2001, pp. 87-113.
James M. G. Jr., “Non-linear Finite Element Analysis of Composite Shells by Total
Lagrangian Decomposition,” Defense Technical Information Center (DTIC), Scientific
and Technical Information Network, July 1997, pp.313-353.
Joe R. E. and Strome D. R., “Direct Stiffness Method Analysis of Shells of Revolution
Utilizing Curved Elements,” AIIA Journal, Vol. 4/9, Sep., 1966, pp. 93-110.
Kandasamy S., “Free Vibration Analysis of Cylindrical Shells Partly Supported on the
Edges,” Department of Mechanical and Materials Engineering, 2002, pp. 207-219.
Karisiddappa M. N. et al., “Finite Element Analysis of Column Supported Hyperbolic
Cooling Towers Using Semi-Loof Shell and Beam Elements,” Department of Civil
Engineering, University of Roorkee, Roorkee, 1998, pp. 27-39.
Kassegne S. K., “Layer wise Theory for Discretely Stiffened Laminated Cylindrical
Shells,” Engineering Mechanics Journal, Virginia, Vol.11, Dec., 1992, pp. 370-403.
Loo Wen-da, “Nonlinear Buckling Analysis of Hyperbolic Cooling Tower Shell with
Ring-Stiffeners,” Applied Mathematics and Mechanics Journal, Vol. 10/2, Feb., 1989,
pp. 221-237.
Minjie C et al., “Parametric Study on the Buckling of Thin Steel Cylindrical Shells under
Elevated Local Axial Compression Stresses,” ASCE Journal, Vol-101, July 2003, pp.
749-761.
Moy S. S. J., “Finite Element Techniques for the Analysis of Cooling Tower Shells with
Geometric Imperfections,” Thin-Walled Structures, Vol. 1/3, 1983, pp. 239-263.
Pedro M. A. et al., “A Finite-Strain Quadrilateral Shell Element Based on Discrete
Kirchhoff - Love Constraints,” International Journal for Numerical Methods in
Engineering, Vol- 64, 2005, pp. 1166-1206.
Pedro M. A., “Analysis of Finite Strain Anisotropic Elasto-plastic Fracture in Thin Plates
and Shells,” ASCE Journal, Vol.19, 2006, pp. 991-1012.
Pica A., Wood R. D. and Hinton F., “Finite Element Analysis of Geometrically NonLinear Plate Behaviour using a Mindlin Formulation,” Computer and Structures,
Pergmon Press Ltd, Vol. II, 1980, pp. 203-215.
Pimenta P. M. et al., “A Triangular Finite Element Applied to the Geometrically Exact
Analysis of Elastic-Plastic Shells,” Computational Mechanics, Beijing, China, 2004, pp.
331-344.
Popov E. P. and Sharifi P., “A Refined Curved Element for Thin Shells of Revolution,”
International Journal for Numerical Methods in Engineering, Vol. 3, Sep., 1971, pp.
495-508.
Rameshbabu C. and Pratap G., “A Field-Consistent Three-Noded Quadratic Curved
Axisymmetric Shell Element,” International Journal For Numerical Methods In
Engineering, Vol.23, Sep., 1986, pp. 711-723.
Rameshbabu C. and Pratap G., “A Field-Consistent Two-Noded Curved Axisymmetric
Shell Element,” International Journal For Numerical Methods In Engineering, Vol.23,
Jan., 1986, pp. 1245-1261.
Salman H., “Towers Supported on Columns,” Journal of the Structural Division, Vol.
96/12, Dec., 1970, pp. 2575-2588.
Soharabuddin A., “Analysis of Thick and Thin Shell Structures by Curved Finite
Elements,” International Journal for Numerical Methods in Engineering, Vol. 2, June,
1970 pp. 419-451.
Srinivasarao P. et al., “Buckling Analysis of Cooling Tower Shells Subjected to NonAxisymmetric Wind Pressures,” Computers & Structures, Vol. 40/4, 1991, pp. 849-856.
Tabiei A., “A New Approach for Finite Element Analysis of Sandwich Shells,”
Department of Aerospace Engineering and Engineering Mechanics, 1999, pp. 225-235.
Takashi Hara, “Dynamic Response of R/C Cooling Tower Shell Considering Supporting
Systems,” Tokuyama College of Technology Journal, 2002, pp. 236-251.
Valente R. A. F. et al., “An Enhanced Strain 3D Element for Large Deformation ElastoPlastic Thin-Shell Applications,” Computational Mechanics, Vol-34, 2004, pp. 503-519.
Veronda D. R., “Stability of Hyperboloidal Shells,” Journal of the Structural Division,
Vol. 101/7, July 1975, pp. 1585-1602.
Veronda D. R. and Weingarten V. I., “Stability of Pressurized Hyperboloidal Shells,”
Journal of the Engineering Mechanics Division, Vol. 101/5, Sep., 1975, pp. 663-678.
Waszczyszyn Z. et al., “Nonlinear Analysis of a RC Cooling Tower with Geometrical
Imperfections and a Technological Cut-Out,” Engineering Structures, Vol. 22/5, May
2000, pp. 480-489.
Woo K. S. et al., “Nonlinear Limit State Analysis of Laminated Plates by P-Version of
F.E.M.,” ASCE Journal, Vol.16, 2005, pp. 202-232.
Yang T. Y., “Shell Elements for Cooling Tower Analysis,” Journal of Engineering
Mechanics, Vol. 109/5, Sep., 1983, pp. 1270-1289.
Zienkiewicz O. C., “The Finite Element Method (5th Edition),” Vol. 2, Solid Mechanics,
Butterworth Publication 2000, pp. 61-62.
Zienkiwicz O. C. and Tayler R. L., “Shells as an Assembly of Flat Elements,” Finite
Element Method, Vol.-2, Solid Mechanics, Butterworth Publication 2000, pp- 216-243.
Zingoni A. , “Self-weight Stresses in Hyperbolic Cooling Towers of General Shape,”
International Journal of Space Structures, Vol. 14/4, Dec., 1999, pp. 281-294.