®
R10/90/8 HORSE FENCE
Overview
Installation Guidelines
R10/90/8 Horse Fence has pre-stripped ends for ease of joining.
A straining post is required at every major
It features solid vertical wires, close vertical wire spacings to help
change in direction or any termination and
prevent damage to hooves, and the unobtrusive high pressure
Specification
No. of Line Wires
10
should be supported by a strut or box
Overall Height (cm)
90
bonded Torus knot which does not have any sharp edges. Tornado
assembly. Netting should be tied off on the
Distance between stay wires (cm)
8
Torus Horse Fence is manufactured with high tensile wire which
straining posts by hand or with suitable joiners.
strains tighter than mild steel and so requires fewer intermediate
When tensioning the fence the ‘crimp’ in
Top & bottom line wire speciication
2.5mm dia - 1235-1390 N/mm2
posts, making it quicker to erect. It does not stretch with weathering
the net should be reduced by approx: 50%.
Intermediate line wire speciication
2.5mm dia - 1235-1390 N/mm2
so does not need to be retightened annually.
Avoid driving staples tight against the wire
Compliance with British and European
Standards
as this will damage the galvanised coating.
Vertical stay wire speciication
Recommended use with Centaur, rail or
Average Weight per 50 Metre Roll (kg)
Dimensions and Tolerances.
51.54
lightning to add additional height and visibility.
Material Composition
BSEN 10218 - Steel Wire and Wire Products part 2 - General Wire
2.5mm dia - 695-850 N/mm2
Heavily galvanised steel wire
Health and Safety
BSEN 10223 - Steel Wire and Wire Products for Fencing and Netting
It is recommended that safety gloves, boots
part 5 - Steel Wire Woven Hinged Joint and Knotted Mesh Fencing.
and glasses are worn at all times when
BSEN 10244 - Steel Wire and Wire Products Non-ferrous Metallic
handling the product.
Product Codes
RZST109002
50 metre roll
Coatings on Steel Wire part 2 - Zinc or Zinc Alloy Coatings (all
Tornado products galvanised to class A).
Suitable for
• Horses
Sustainability
All Tornado products are 100% recyclable.
Traceability
This fence is batch marked and can be traced back to point of
manufacture.
All measurements are approximate. It is the user’s responsibility to check the product is suitable for the application. We reserve the right to change speciications without notiication.
Issued March 2015
Tornado Wire Ltd.
www.tornadowire.co.uk | England & Wales 01789 778 766 | Scotland 01764 655 648
®
R10/90/8 HORSE FENCE
Fence Layout Detail
Top wire 2.5mm high tensile
Line Wire Detail
100mm
Intermediate line wire 2.5mm high tensile
100mm
Vertical stay wire 2.5mm
100mm
100mm
100mm
100mm
Plain Wire
or
100mm
Centaur or
Lightning
or
100mm
100mm
80mm
Information on ancillary items
and tools can be found on the
relevant data sheets.
900mm
Fence Configuration Detail
Net
Torus Knot
Related Products
Manufactured with a high
• Plain wire
pressure bonded, smooth
• Centaur
knot and a continuous vertical
• Lightning
stay wire. The Tornado Torus
• Staples
offers optimal strength even in
• Stock-ade staple gun
the most extreme environments.
• Range of fence installation tools
Ground Level
80mm