Microgrid
Photovoltaic System
Cat® Module Plus Folding Table
Streamlined integration of Cat® solar modules
with proven mounting and harness technology
to lower the total cost of installation. Featuring
a unique folding design, this fixed tilt mounting
system can be installed rapidly and accurately by
as few as two people. Pre-installed clips minimize
field installation errors and enable industry leading
module installation rates.
Image shown may not reflect actual configuration
Features
• Designed for velocity though an integrated
system design that reduces site design time,
delivery, and installation.
• Unique folding table design with multiple
gigawatts of field experience
• Designed for high installation velocity and low
field labor.
• Pre-assembled structure to reduce part count
and minimize installation errors.
• Multiple product configurations for diverse site
conditions
• Pre-configured standard wiring harness to
combine strings of Cat modules mounted on a
folding table.
• Harnesses feature touch-safe connectors, an
inline fuse for each string, and is certified to
UL and IEC standards and designed for 30A
continuous duty in -40°C to 50°C environments
• Standard two-year warranty with additional
increments available.
Module Plus Configuration
LEHE0974-00
Page 1 of 2
Microgrid
Photovoltaic System
Technical Data
Folding Table Specifiction
Configuration
Posts
Tilt Bracket
Table Structural Materials
4 modules high x 5 wide, landscape orientation
Steel I-beam typical, many other foundations supported
2-3 posts per table,
Post length and spacing defined by site conditions
20°
Steel (hot dip galvanized and/or roll-formed pre-galvanized steel sheet)
Beams
18 gauge rolled steel
Rails
20 gauge rolled steel
Clips
Aluminum clips with Santoprene insulators
Foundation
Driven posts (typical), alternate foundation types available
(screw pile, ballasted)
Dimensions
North/South: Approximately 2.54 m (8.3 ft) (inclined plane)
East/West: 6.1 m (20 ft) wide
Design Standards
Installation
Certified to UL2703 and IEC 61646. Designed in accordance
with IBC, U.S. building codes for ASCE 7-10 loads.
No in-field welding required. Optimized for high installation velocity.
Wind
Up to 270 kph (180 mph) with 24 kg/m2 (5 psf) snow load (per ASCE 7-10)
Snow
Up to 24 kg/m2 (35 psf) at 155 kph (115 mph) wind (ASCE 7-10)
Standard Layout
1000 V = 10 modules per string, 8 strings per block
4 tables per block, 24.3 m (80 ft) total row length
www.Cat-ElectricPower.com
©2015 Caterpillar
All rights reserved.
LEHE0974-00 (12-15)
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, the “Power
Edge” trade dress as well as corporate and product identity used herein, are
trademarks of Caterpillar and may not be used without permission.