Technical Specifications of Passive Components - DAE e

Technical Specifications of Passive Components and ICs:
1. Surface Mount, Multilayer, Ceramic, Chip Capacitors:
10 pF
120 pF
22 pF
150 pF
33 pF
180 pF
47 pF
220 pF
68 pF
330 pF
100 pF
470pF
680 pF
1 nF
2.2 nF
3.3 nF
4.7 nF
10nF
22 nF
330 nF
4.7 uF
33 nF
470 nF
10 uF
47nF
680 nF
68 nF
1 uF
100nF
2.2 uF
220 nF
3.3 uF
2. Surface Mount, Metal
0 Ohm
33 Ohm
470 Ohm
3.3 K
47 K
2.2 Ohm
47 Ohm
680 Ohm
4.7 K
100 K
SMD Chip Capacitor Specifications:
1. Package
: 1206 (3.2 mm x 1.6 mm)
2. Voltage Rating DC : 35VDC
3. Dielectric
: X7R
4. Tolerance
: 5%
5. Operating Temp. : -55 to +125ºC, 0±30 ppm/ºC
6. Compliant
: RoHS, Pb Free
7. Packaging
: Real
film, Chip Resistors:
4.7 Ohm
82 Ohm
1K
10 K
180 K
6.8 Ohm
100 Ohm
1.2 K
12 K
330 K
10 Ohm
220 Ohm
1.5 K
15 K
470 K
Quantity: 1 SET
(1 Set contains, each value of 5000 pieces)
22 Ohm
330 Ohm
2K
33 K
1M
3. Tantalum Capacitor, SMD:
Value
2 uF
2.2uF
3.3uF
4.7uF
Packages
Code A
(3.2mm x 1.6mm)
1.0 uF
Packages
Code A
(3.2mm x 1.6mm)
1. Package
: 1206 (3.2 mm x 1.6mm)
2. Power Rating : 1/4 Watt
3. Tolerance
: 10%
4. Compliant
: RoHS, Pb Free, :
5. Packaging
: Real
6. Temp. Coefficient: +100 ppm/0C
7. Operating Temp.: -55 to +125ºC
Quantity: 1 SET
(1 Set contains, each value of 500 pieces)
Value
4.7 uF
22uF
33uF
47uF
100uF
Packages
Code B
(3.5mm x 2.8mm)
4. Tantalum Capacitor, SMD:
Value
0.1 uF
Quantity: 1 SET
(1 Set contains, each value of 5000 pieces)
1. Voltage Rating DC : 35 VDC
2. Dielectric
: X7R
3. Tolerance
: 10%
4. Operating Temp. : -55 to 125ºC,0±30 ppm/ºC
5. Compliant
: RoHS, Pb Free
6. Packaging
: Real/Tap
Quantity: 1 SET
(1 Set contains, each value of 2000 pieces)
Value
10uF
Packages
Code B
(3.5mm x 2.8mm)
1. Voltage Rating DC : 35 VDC
2. Dielectric
: X7R
3. Tolerance
: 10%
4. Operating Temp. : -55 to 125ºC,0±30 ppm/ºC
5. Compliant
: RoHS, Pb Free
6. Packaging
: Real/Tap
Page 1 of 3
5. Three terminal Voltage regulators, SMD:
O/P Voltage
+ 2.5 Volt
+ 3.3 Volt
+ 5.0 Volt
+ 15.0 Volt
Packages
Positive voltage
regulator SMD
SOT-89 Package
Value
- 5 Volt
15 Volt
-
Quantity: 1 SET
(1 Set contains, each value of 1000 pieces)
Packages
Negative voltage
regulator SMD
SOT-89 package
+18.0 Volt
6. Driver IC, SMD Package:
IC No. or
Equivalent
Packages
UCC27538
SOT-23
ZXGD3004E6
SOT23-6
Si8610BB-B-IS
SOIC-8
1. I/P Voltage Rating DC
: 35 VDC
2. Output Current
: 100 mA
3. O/P Voltage Tolerance
: 10%
4. Operating Temp.
: -55 to 125ºC,0±30 ppm/ºC
5. Compliant
: RoHS, Pb Free
6. Package type
: SOT-89
7. Packaging
: Real/Tap
Quantity: 1 SET
(1 Set contains, Pieces specified in table)
No of pins
200 pieces
6
5
8
One Set
Contains
2000 Pieces
200 pieces
Brief specification
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Enable with Fixed TTL Compatible
High 2.5-A Source and 2.5-A or 5-A Sink
Wide VDD Range From 10 V up to 35 V
Output Held Low When Inputs are Floating
Fast Propagation Delays (17-ns typical)
Fast Rise and Fall Times
(15-ns and 7-ns typical with 1800-pF Load)
Under Voltage Lockout (UVLO)
Used as a High-Side or Low-Side
40V operating voltage range
8 amps peak output current
Fast switching emitter-follower configuration
1ns propagation delay time
14ns rise/fall time, 1500pF load
Low input current requirement
1.9A(source)/1.9A(sink) output current from
10mA input
High-speed operation
DC to 150 Mbps
No start-up initialization required
Wide Operating Supply Voltage 2.5–5.5 V
Up to 5000 VRMS isolation
60-year life at rated working voltage
High electromagnetic immunity
Ultra-low power
Note:
1. Quote for above Items set wise (Not individual value wise). Price comparison will be done set wise
2.
3.
4.
5.
and hence purchase order will be placed for the complete set, not for the individual items in the set.
Complete Data sheet of quoted part (including foot print details and manufacturer’s name) should
be attached with quotation, failing which quotations will not be accepted.
The resistance must be RoHS compliance and chip resistor should produce in accordance with EU
RoHS directive. Supplier should enclose a certificate of same from the manufacturer.
Material must be supplied in original manufacturers packing with date of manufacturing and
batch no. Part supplied against this offer must not be more than one year old.
Certificate of traceability from authorized distributer must be supplied along with item.
Page 2 of 3
6. Note: “ In the event of an order on suppliers registered in MP VAT will be deducted
at source and TDS certificate will be furnished by the paying authority as per MP
VAT Act 2002 Amended on 05.04.2016 and 23.02.2017”
Page 3 of 3