A018 Battery Inflator
Features:
High-powered battery (lasts approx. 2-3 hours)
Multi-functional electric air pump, designed for different balloons.
Wire storage room
Different size of nozzles
Nozzle, ball needle and hose
Technical Info:
Pressure: 40PSI
Airflow: 50L/min
Voltage: AC220-240V / AC110-120V
Power: 100W
Product Size: 26x20x10.5cm
A040 Trendy Inflator
Features:
Six removable nozzles.
Two air pumps, one for high-pressure and the other one for low-pressure.
Inflate both regular & modelling balloon at the same time.
Technical Info:
Pressure: 25(A)/1.8(B)PSI
Airflow: 50(A)/380(B)L/min
Voltage: AC220-240V / AC110-120V
Power: 100(A)/400(B)W
Product Size: 28.7x13.5x20.5cm
A007 Electric Inflator.
Features:
Two operation modes: Touch-on use and continuous use
Automatic shutdown in case of overheating.
Hidden space for cord and fittings
Technical Info: 230 VOLT 50 Hz 500 W
A049 Stermay® Electric Inflator
Features:
Two big-size inflating nozzles.
One touch-on switch.
Two operation modes-touch-on use and continuous use.
Includes smaller removable nozzles to screw-on to inflation ports.
Hidden space for cord and fittings
Technical Info: 230 VOLT 50 Hz 450 W
A048 "MINI" Double Nozzle Inflator
Features:
Two big-size inflating nozzles.
One touch-on switch.
Two operation modes-touch-on use and continuous use.
Includes smaller removable nozzles to screw-on to inflation ports.
Technical Info:
PRESSURE: 2 PSI
VOLTAGE: AC220-240V
POWER: 600W
PRODUCT SIZE: 16x13x13cm
2
A021 Electric Inflator Cool Aire® Pro.
Features:
Patented push-down “Nozzle-Activated” switch for momentary use!
Runs 30-degrees cooler than our other inflators!
Comes with Premium’s Patented Bypass Nozzle for better performance!
Small, compact, user-friendly sized unit.
Comes with Reducer Nozzle Holders to keep reducers with your inflator at all times.
7-foot long cord with Built-In Cord Wrap for convenient storage.
Technical Info: 230 VOLT 50 Hz 450 W
A044 Double Nozzle Inflator with Timer
Features:
Nozzle, Timer (set time for inflation) and Switch.
Wire room storage.
Speeder.
Mutiple operating modes.
Technical Info:
Pressure: 1.2-2.2PSI
Voltage: AC220-240V / AC110-120V
Product Size: 22x17x18cm
A020 Electric Inflator with Timer
Features:
Equipped with a timer for inflating balloons in equal measure.
Two operation modes - Inflation with "Timer" or continuous use.
System auto power off in case of overheating.
The device resumes its function as soon as the temperature returns to safe levels.
Does not inflate modeling balloons.
Technical Info: 230 VOLT 50 Hz 450 W
A001 Large Manual Pump
An inexpensive, manual option for blowing your balloons up with air.
The dual action air flow inflates latex balloons with less effort.
Length 44 cm.
A015 Small Manual Pump
An inexpensive, manual option for blowing your balloons up with air.
The dual action air flow inflates latex balloons with less effort.
Length 28 cm.
A016 Flat Manual Pump
An inexpensive, manual option for blowing your balloons up with air.
The single action air flow inflates latex balloons with less effort.
Length 28 cm.
A003 Economic Balloon Pump
An inexpensive, manual option for blowing your balloons up with air.
The single action air flow inflates latex balloons with less effort.
Length 22 cm.
A009 Manual Mini Pump "Clown"
Small & manageable, the perfect pump to package with our
modelling balloons.
3
A046 Bouquet Weight®
Use candy, water, or sand to add as much weight as needed...
The Translucent Colored Bouquet Weights allow you to increase the total weight as
needed to hold down helium-filled Mylar and Latex balloons. Empty they weigh less than
30-grams, whilefilled with water or candy then can weigh up to 250-grams to hold down
bigger bouquets than ever!
Magical Translucent Colors: Ruby Red, Sapphire Blue, Diamond Clear, and Emerald Green.
Simply add water and tighten the lid securely and they are water-tight!
Unique 'Secure Loop' Ribbon Tie for holding the balloon to the weight.
A045 Walker WeightsTM
The Walker WeightTM makes all Helium-Filled balloons unique and special with
the Cool "Corkscrew" look.Perfect at kids' parties, and equally popular at adult events.
It Jumps, Hops, Wobbles and Floats across the floor and is offered in Exciting
Translucent Colors.
A 30-Gram weight designed to hold down helium filled Mylar balloon, even supershape,
BubblesTM, or two 11˝ helium-filled latex balloons.
Available in exciting Translucent colors including Ruby Red, Emerald Green, Hot Pink,
Sapphire Blue and Crystal Clear to complement your party theme.
The unique, "Cool Corkscrew" look attracts attention and adds value to the helium-filled
balloons.
Decorate the Walker WeightTM with curling ribbon or special items for any special occasion.
Kids Love them and use them long after the life of balloon.
A014 Plastic Balloon Weights.
These plastic weights will hold down a single helium-filled 12". They weigh 8 grams each
and come in variety of colors and shapes including: pig, teddy bear, clown, heart, star
and duck.These weights will be perfect to use when handing out at events, or for holding
one or two helium balloons still on a table at weddings and parties.
Simply tie ribbon to the balloon and then tie a knot around the hoop on the weight.
A002 Balloon Stuffer Machine.
This machine is perfect for inserting objects and balloons within unprinted or decorated
18 inch balloons. Also used for packing gifts or stuffed animals inside the balloon.
The set contains:
a stuffer-globe
a hose with plate
a protective sleeve
instructions
NEW!
A050 T-Rex Balloon Stuffing Tool
Stuff 3ft balloons - 18" balloons - stuff plush toys inside balloons, create exploding
balloons, create column toppers. Nothing stuffs balloons faster!!!
Features:
1 T-Rex Balloon Stuffing Tube
2 Legs ( for the T-Rex )
6 Black Rubber O Rings
1 Clear 1 meter air hose
1 Carry Bag
Inflator sold separately.
4
A032-M Color changing LED for balloons
For a softly glowing airborne display, place these small Balloon Lights inside
your latex or translucent foil balloons before filling them with helium or air.
Add an element of novelty to outdoor parties, or an atmosphere of romance to
dances and weddings. Pull the plastic tab and they burn for more than 48 hours,
remaining cool to the touch.
Package contains 25 LED mini lights, each measuring approx.1 cm.in diameter.
A032 White LED for balloons
A062 Led Valve for Giant Balloons
NEW!
With this valve, giant balloons will glow in the dark, illuminating them with the color of your
choice! This balloon valve has 10 multi-colored LED lights, including white. It's a stress-free
ay to create an awesome atmosphere in whatever color and pattern you want! Use the
remote to choose from 16 color options with 5 different display settings.
The settings are: a steady display in your color choice, flash which cycles through the colors,
strobe which pulses (dims and brightens) on your choice of color, fade which cycles through
all colors fading in and out and smooth which cycles through red, green and blue. The remote
comes with a CR2025 battery (included) and the base uses 3 AAA batteries (not included)
Suitable for:
PT/350 - PT/400 - PT/450 - PT/550 - GPF/21 - GPF/23
A012 Illuminator for Giant Balloons.
Includes a valve for inflating and topping up gas. With this valve to replenish helium
gas, you can make your balloons fly for as long as you want. This valve allows you to
perform with the utmost simplicity total inflation of the balloon or topping up with
helium gas . Simply enter the gas pipe in the outlet nozzle.
Power supply: 230V 50Hz
The bulb Voltage: 24V
Lamp power: 100W
Cable length: 15 Mt
A012 Economic Illuminator.
Includes a valve for inflating and topping up gas. With this valve to replenish helium gas,
you can make your balloons fly for as long as you want. This valve allows you to perform
with the utmost simplicity total inflation of the balloon or topping up with helium gas.
Simply enter the gas pipe in the outlet nozzle.
Power supply: 230V 50Hz
The bulb Voltage: 220V
Lamp power: 150W
Cable length: 12 Mt
NEW!
A056 Cube Balloon Sizer
This cube balloon sizer will enable you to inflate balloons to their correct size every time.
It will size balloons to the following: 3″, 3.5″, 4″, 4.5″, 5, 5.5″, 6″, 6.5″, 7″, 9″, 10″, 11″
and 14″.
5
A004 Sticks & Cups
Use these sticks and cups to create air filled balloon centerpieces that last for weeks.
Perfect for balloon distribution and once in the hands of a child, it becomes an excellent
advertising medium. No need for helium.
A013 One piece Stick & Cup
These are the One Piece variety, so they are safer for Children.Use these sticks and
cups to create air filled balloon centerpieces that last for weeks. Perfect for balloon
distribution and once in the hands of a child, it becomes an excellent advertising
medium. Includes side hooks for easer balloon placement. No need for helium.
A010 Balloon Ribbon
One complete balloon sealer and 110 cm. ribbon system for helium-filled latex
balloons. Suitable for sealing and distribution of balloons filled with helium gas.
With the automatic closing system avoid knotting and threading. A simple use
for a great effect.
* Quick, easy assembly in 3 simple steps
* Pearl white ribbon and clear closing disk
NEW!
A057 Raffia Balloon Net (16")
Create a seasonal Hot-Air Balloon to suspend over tables or use as centerpieces. Also
use to collect Gift Cards, and fill with Sweets or Favors to delight guests.
Ideal balloon measurement:
PT/150 - PT/18 - PT/180 - PT/200
A019 Raffia Balloon Net (36")
Create a seasonal Hot-Air Balloon to suspend over tables or use as centerpieces. Also
use to collect Gift Cards, and fill with Sweets or Favors to delight guests.
Ideal balloon measurement:
PT/200 - PT/220 Round - PT/250 - PT/300
6
A023 Small Closing Clip
Seal off your giant balloon, inflated with air o gas, quickly and efficiently.
Tie loop included on the clip.
Suitable for:
PT/180 - PT/200 - PT/250 - PT/220 ROUND - PT/250 ROUND - PT/300 ROUND
GPF/7 - GPF/8 - GPF/9 - GPF/13 - GPF/14 - GPF/16 - GPF/17 - GPF/18 - GPF/19
LINK/G
A024 Medium Closing Clip
Seal off your giant balloon, inflated with air o gas, quickly and efficiently.
Tie loop included on the clip.
Suitable for:
PT/300 - PT/350
A025 Large Closing Clip
Seal off your giant balloon, inflated with air o gas, quickly and efficiently.
Tie loop included on the clip.
Suitable for:
PT/400 - PT/450 - GPF/21
A036 Jumbo Closing Clip
Seal off your giant balloon, inflated with air o gas, quickly and efficiently.
Tie loop included on the clip.
Suitable for:
PT/400 - PT/450 - GPF/21
A011 Closing Valve
This valve allows you to inflate with the utmost simplicity the total inflation
of the balloon or topping up of helium gas. Simply enter the gas pipe in the
outlet nozzle and that’s it!!!
Suitable for:
PT/350 - PT/400 - PT/450 - PT/550 - GPF/21
7
A027 Ultra Hi-Float 24 oz.
Whether you’re a professional party planner or someone just looking to pump up the
fun for a special event, HI-FLOAT has you covered. ULTRA HI-FLOAT inside a latex
helium balloon makes it float an average of 25 times longer!
It is very easy to use ULTRA HI-FLOAT to extend the float time of latex balloons.
With ULTRA HI-FLOAT, event décor can be prepared ahead of time, and balloon
bouquets will float for several days.
HI-FLOAT is nontoxic and non-irritating. It is very similar to the glue found on the back
of postage stamps.
A028 Ultra Hi-Float 96 oz.
Whether you’re a professional party planner or someone just looking to pump up the
fun for a special event, HI-FLOAT has you covered. ULTRA HI-FLOAT inside a latex
helium balloon makes it float an average of 25 times longer!
It is very easy to use ULTRA HI-FLOAT to extend the float time of latex balloons.
With ULTRA HI-FLOAT, event décor can be prepared ahead of time, and balloon
bouquets will float for several days.
HI-FLOAT is nontoxic and non-irritating. It is very similar to the glue found on the back
of postage stamps.
A026 Ultra Hi-Float Pump Kit
The pump kit contains:
a plastic pump dispenser
detailed instructions
a plastic extension tube
a set of restriction clips that are used to control the amount of HI-FLOAT dispensed
a red cap to keep the HI-FLOAT in the pump nozzle from drying and clogging the pump.
A037 Small Balloon Release Net
Made from high quality strong lightweight polyester material. The net is made in
a tubular shape without seams. Reusable and may be easily rolled up and stored.
Holds approximately 200 PT/90 latex balloons.
A035 Large Balloon Release Net
Made from high quality strong lightweight polyester material. The net is made in
a tubular shape without seams. Reusable and may be easily rolled up and stored.
Holds approximately 500 PT/90 latex balloons.
8
A017 Balloon Time ® Helium Gas Tank
Suitable for inflation of latex and mylar balloons. After inflating all your balloons,
the tank is disposable and can be disposed as recyclable material as it is made ​
of metal. Therefore does not require special handling or special precautions
(refer to the municipal regulations on the subject).
Inflates approx. 25
Inflates approx. 30
Inflates approx. 39
Inflates approx. 50
PT/120 (32cm) balloons.
PT/110 (30cm) balloons.
PT/90 (26cm) balloons.
PT/70 (19cm) balloons.
Not suitable for inflating giant balloons. The amount of the balloons may vary
according to inflation. Balloons not included.
A017-B MaxxiLine Helium Disposable Bottles
Suitable for inflation of latex and mylar balloons. After inflating all your balloons,
the tank is disposable and can be disposed as recyclable material as it is made ​
of metal. Therefore does not require special handling or special precautions
(refer to the municipal regulations on the subject).
Inflates approx. 23
Inflates approx. 28
Inflates approx. 36
Inflates approx. 45
PT/120 (32cm) balloons.
PT/110 (30cm) balloons.
PT/90 (26cm) balloons.
PT/70 (19cm) balloons.
Each cylinder is also fitted with a plastic base to prevent it falling over.
MaxxiLine Helium gas Bottles are fully manufactured in Italy in according to
the EN 12205 standards
Not suitable for inflating giant balloons. The amount of the balloons may vary
according to inflation.
A047 Economy Helium Tilt Valve
Full brass Helium Air Balloon inflator regulator is designed for filling Latex & Mylar Balloons
easily. Hand tight cylinder connection requires no wrench.
NEW!
A058 - Helium Tilt Valve with Guage
Economy Standard Tilt Valve Latex Inflator Horizontal one piece with Gauge.
NEW!
A059 - Vertical Style Helium Valve With Gauge
This latex inflator has a hand tight connection and vertical design which protects the tilt
valve from being damaged.
NEW!
A060 - Helium Inflator Valve L-F
Balloon Inflator for both foil and latex balloons. Rubber tilt valve for latex balloons and an
extended length brass push down valve for foil balloons. The foil side also includes an
automatic shut-off to prevent over filling and bursting. Hand tight connection with contents
gauge.
9
A031 Balloon Display without Weight
Create the effect of a real tree full of balloons!
This plastic balloon tree has detachable parts which makes it very easy to assemble.
Ideal to display latex and mylar balloons when attached to balloon sticks. May be
mounted integrally or partially.
Capacity: 40 to 50 balloons on balloon sticks.
Assembled Size: Maximum height 1.80 m
The capacity depends on the size of the balloon and the number of sticks inserted in
the holes. Balloons with sticks not included.
A031/P Balloon Display with Weight
Create the effect of a real tree full of balloons!
This plastic balloon tree has detachable parts which makes it very easy to assemble.
Ideal to display latex and mylar balloons when attached to balloon sticks. May be
mounted integrally or partially. Weight incorporated for extra stability.
Capacity: 32 to 42 balloons on balloon sticks.
Assembled Size: Maximum height 1.80 m
The capacity depends on the size of the balloon and the number of sticks inserted in
the holes. Balloons with sticks not included.
A034 Display for packaged balloons
Ideal display for shops where space is important.
Allows you to sell packaged balloons in a practical, visible but especially space-saving
way.
Capacity: 16 hooks for displaying bags.
Assembled Size: Height 1.50 m
A034/P Display for packaged balloons with Weight
Ideal display for shops where space is important.
Allows you to sell packaged balloons in a practical, visible but especially space-saving
way. Weight incorporated for extra stability.
Capacity: 16 hooks for displaying bags.
Assembled Size: Height 1.50 m
A040 Balloon Display Complete - Mixed
Complete Balloon Display containing packaged un-printed and printed balloons
A041 Balloon Display Complete - Un-printed
Complete Balloon Display containing packaged un-printed balloons.
A042 Balloon Display Complete - Decorated
Complete Balloon Display containing packaged decorated balloons.
10
NEW!
A051 Curling Ribbon
High quality Italian curling ribbon in various colors supplied on a handy 500 meter spool.
Called curling ribbon because you can easily make attractive decoration by curling the
ribbon. To curl drag the ribbon over a blunt knife or scissors. Lots of other uses - including
for helium balloons, arts & craft, basket decor etc.
NEW!
A052 Decorated Ribbon – Shiny Hearts
Show someone you love how much you care about them with Cattex’s heart
decorated ribbons. Available in different colors, they are ideal for Valentine’s day
or for any other romantic event.
NEW!
A061 Decorated Ribbon – Hearts
Show someone you love how much you care about them with Cattex’s heart
decorated ribbons.With their two color hearts pattern they are ideal for Valentine’s day
or for any other romantic event.
NEW!
A053 Decorated Ribbon – Polka Dots
Celebrate a new born or a baptism with these fun polka dots ribbons
NEW!
A055 Decorated Ribbon – Teddy Bears
Celebrate a new born or a baptism with these adorable teddy bears ribbons
NEW!
A054 Decorated Ribbon – Wedding
Gold and silver ribbons with wedding rings decorations, make weddings
and anniversaries even more special.
11
A038 Latex Balloon Arch Frame Kit
This kit includes fittings and pipes to make great arches of balloons for every occasion.
6 feet long to make an arch with 4 meter wide base.
Please note this item does not include the balloons needed but may be purchased
seperatly.
The appropriate amount of balloons to create a balloon arch is approx. 200 pcs.
The kit includes:
2 wooden bases with fitted connectors.
12 plastic tubes 50 cm each.
13 Plastic fittings to connect the pipes.
Assembly istructions.
The arch kit is reusable many times and suitable for any party or any occasion!
A038C Heart Shaped Latex Balloon Arch Frame Kit
Heart Shaped Latex Balloon Arch Frame Kit including fittings and pipes to make great
heart shaped arches of balloons for every occasion
2.4 meters high x 1.7 meter wide base.
Please note this item does not include the balloons needed but may be purchased
seperatly here: PT/90. The appropriate amount of balloons to create a balloon
arch is approx. 240 pcs.
The kit includes:
2 Wooden MDF bases with fitted connectors.
8 Straight plastic tubes
14 Plastic fittings to connect the pipes.
6 Soft curved tubes
1 Hard curved tube
Assembly istructions
.
The arch kit is reusable many times and suitable for any party or any occasion!
12