Iv.
BRANDS and
products
3. DECORATIVE
GLASSES
3.0 Introduction
3.1 Patterned glasses 266
267
3.2 Matt-finish glasses 278
3.3 Painted glasses 290
3.4 Mirrors 303
3.5 Decorative laminated glasses 320
3.6 Antibacterial glasses 3.7 Framing glass 327
330
Imagin
Wired Imagin glasses Lacomat
Matelux
Lacobel
Matelac
Safe and Safe+
Mirox MNGE
Mirox 3G
Mirold Morena
Safe and Safe+
Sanilam Easycut
Stratobel Color Standard
Stratobel Color Rainbow
www.yourglass.com
Glamatt Matobel One Side
268
275
280
283
291
296
301
305
308
312
315
317
322
325
331
332
The range of decorative glasses can be used in interiors * and
for furniture. These applications are very varied and include:
>
wall covering
>
shower screens
>
doors: sliding or fixed doors for wardrobes and furniture,
entrance doors to buildings
>
furniture:
3.1
PATTERNED GLASSES
PATTERNED GLASSES
3.0
introduction
DECORATIVE GLASSES –
INTRODUCTION
· horizontally in tables, consol tables and shelving
· vertically in furniture coverings.
>
partitions
>
mirrors
>
balustrades
>
floors
>
ceilings
>
frames.
Depending on the desired application and current standards,
products must be laminated, toughened, fire-resistant or covered with a SAFE or SAFE+ film.
266
be coloured or non-coloured
>
include a design or be plain.
In all cases, it may be transparent, translucent or opaque.
* Some decorative glasses can also be used in façades.
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
Decorative glass may:
>
267
▼ PROCESSING OPTIONS –
USES AND THICKNESSES
Symbols used
T
Toughenable
III
Can be laminated (patterned 4 mm clear and PVB >=0.76 mm)
II
Can be assembled into a double glazed unit
E
Can be enamelled
C
Clear (thickness in mm)
CS
Clear sandblasted (thickness in mm)
B
Bronze (thickness in mm)
BS
Bronze sandblasted (thickness in mm)
Y
Yellow (thickness in mm)
▼ DESCRIPTION
>
>
>
BRANDS AND PRODUCTS
>
268
>
>
Decorative glasses on which the design is applied to one or
both sides of a clear, bronze or yellow glass
Over 40 geometric, stylised, figurative, classical or exclusive designs with or without metal mesh (see wired Imagin
glasses)
Thicknesses: 3 to 19 mm
The range is split into several families depending on their
designs: Aquatic, Atom, Cathedral, Diamond, Geometric,
Nature and Texture
Interior applications: showers, furniture etc.
Exterior applications: doors and windows etc.
▼ BENEFITS
Wide range of designs
> Translucence determined by the structure and the design
> Ideal for decorative applications requiring a degree of privacy
> Can be thermally toughened, laminated, sandblasted or
fitted in double glazing depending on the design and thickness.
T III II
E
C
33/33
T III II E 4-6-8-10
Aero
T
II E
4
Antique
T
II E
4
Atlantic
II E
4
Bamboo
II
5
CS
4
B BS Y
4 4
4
www.yourglass.com
4
4
>
5
3.1
PATTERNED GLASSES
IMAGIN
5 5
DECORATIVE GLASSES
3.1
PATTERNED GLASSES
IMAGIN
Decorative patterned glasses
269
T III II
E
II
C
CS
4
4
Cathedrale C
T
Chinchilla
T III II E 3-4-5-6-8
Crepi
T III II E
Dalcobel
T
E
15
Delta
T
II E
4
Diamante 9
T
II E
4
Eclissi
T III II E
3-4-6
Farao
T
II E
4-6-8
4
II E
4
4
Flutes
www.yourglass.com
B BS Y
3-4-6-8
4
T III II
E
C
II E
4
Galaxy
T
4-8
Galette
T III II E 4-6- 15-19
4-6
Garten
T
II E
4
Gothic
T
II E
4-5-6
Kathedral
Gross
T
II E
4-5-6
Kathedral
Klein
T
II E
4
Konfeta
T
II E
4
Krizet
T III II E
4
Kura
T
4
4 4 4
4
II E
CS
B BS Y
4
4
4
4
3.1
PATTERNED GLASSES
IMAGIN
DECORATIVE GLASSES
3.1
PATTERNED GLASSES
BRANDS AND PRODUCTS
270
IMAGIN
271
T III II
Large Flemish
Marine
T
Martele O
Matt float
BRANDS AND PRODUCTS
C
II E
4
Quatrix
II
4
II
4
II
CS
B BS Y
3-4-5- 6-8-10
T III II E
Niagara
272
E
5
5
5 5 5
T III II
E
C
CS
T III II E
4-6-8
4
Raywall 45
III II
6
Raywall 90
III II
6
Satinbel
T III II E
3-4-6
Screen
T III II E
4-6
Nordic
T III II E
4
Square
Orchid
T III
II
4
Sunset
T III II E
Patterned 130
T
II
5
Travertino
T
Polar
T
II E
4
Twist
T
4
II
B BS Y
3.1
5
3-4-6-8
4-6
II E
4
4
II E
4
For further details on thermal heat-strengthening or enamelling
options please contact AGC.
www.yourglass.com
PATTERNED GLASSES
IMAGIN
DECORATIVE GLASSES
3.1
PATTERNED GLASSES
IMAGIN
273
▼ USES
Single glazing
Yes
Double glazing
Yes – In general, the design can be applied to face either the
inside or the outside of the double-glazing unit. However, this is
not possible with deep-textured designs to ensure that the glass
adheres to the sealant.
3.1
PATTERNED GLASSES
3.1
PATTERNED GLASSES
WIRED
IMAGIN GLASSES
Glasses with integrated metal mesh
IMAGIN
▼ APPLICATIONS
Interior
Yes – All furniture, partitions, bottom plates, shower screens,
shelves, tables, counters, etc.
Exterior
Yes
274
>
Clear or coloured glasses with or without a patterned structure
>
The integrated metal mesh holds glass fragments in place if
the pane is broken
>
The range also includes clear polished wired glass
>
Application: interior and exterior.
▼ BENEFITS
Fire resistant properties
www.yourglass.com
>
Polished wired glass P (E30/E60)
>
Polished wired glass J (E30)
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ DESCRIPTION
275
▼ RANGE
Wired D
▼ USES
Delta
Single glazing
Yes
Double glazing
No
▼ APPLICATIONS
Wired O
Denim
Wired S
Polished
wired
glass
Atlantic
Interior
Yes – All furniture doors, partitions, etc.
Exterior
Yes – Wired glass is not considered a safety glass – please refer
to current standards.
▼ STANDARD THICKNESSES (mm)
Pattern
Thickness
Crepi
6
D
6
Delta
Nordic
3.1
WIRED IMAGIN GLASSES
PATTERNED GLASSES
3.1
PATTERNED GLASSES
WIRED IMAGIN GLASSES
O
Polished wired
S
6
6-7-9
6
6-7
276
▼ PROCESSING OPTIONS
Heat-treatment
Heat-strengthened and thermally toughened
No
Silk-screen printed and enamelled
No
Bending
No
Laminated glass
PVB
No
EVA
No
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
Crepi
277
▼ RANGE
Matt-finish glasses fit the current trend towards minimalism,
pure forms and simplicity.
Use the following table to determine your choice of look, level
of light transmission and possible applications.
278
✓
3.2
✓
✓
✓
(1) Over 80%: high / 60% to 80%: average / Below 60%: low.
Intrinsic function.
Function achieved through processing.
✓
✓
✓
✓
✓
✓
Sandblasted Patterned glasses See Imagin
Imagin
Intense
Varies
depending on
sandblasting
Average High Sandblasted Sandblasted glasses See Planibel
Planibel
✓
✓
✓
✓
✓
Laminated safety glasses
with a matt PVB interlayer Intense
See section on laminated
design glasses
Stratobel
Color
PVB matt
Varies depending on the
number and
type of PVB
✓
✓
✓
✓
✓
High Acid-etched glasses
Matelux
✓
High Light to
intense
DECORATIVE GLASSES
www.yourglass.com
Matt-finish painted glasses Intense
Matt
look
Description
Range
BRANDS AND PRODUCTS
Light
transmission (1)
Application
A matt-finish is also often chosen to filter light softly and to provide a degree of privacy. Depending on the technique used,
the level of light transmission of a translucent glass can also be
higher than that of clear glass.
Lacomat
Safety laminating with matt PVB (see Stratobel Design).
The particular technique used will depend on the type of application and on the degree of translucence and level of safety
required.
Ext.
Sandblasting (see Planibel, Imagin)
>
Int.
Acid-etching (see Matelux, Matelac)
>
Safety
Painting (see Matelac)
>
PVB acoustic
laminating
AGC uses several techniques to create a matt finish:
>
MATT-FINISH GLASSES
▼ Introduction
Safe Thermal
PVB
Film toughening laminating
3.2
MATT-FINISH GLASSES
MATT-FINISH GLASSES
MATT-FINISH GLASSES
279
▼ RANGE
Lacomat Classic
More diffused opalescent and matt appearance
Lacomat White
More pronounced opalescent look – whiter tint
▼ TECHNICAL SPECIFICATIONS
Processing options
3.2
LACOMAT
MATT-FINISH GLASSES
3.2
MATT-FINISH GLASSES
LACOMAT
Matt-finish painted glasses
Heat treatment
Heat-strengthening and thermal toughening
No
Silk-screen printing and enamelling
No
Bending
No
Laminating
>
>
Clear Planibel float glass coated on one side with a mattfinish paint
There are two versions of Lacomat:
· Lacomat White: pronounced matt appearance, white tint
· Lacomat Classic: matt appearance, more diffused than
Lacomat White.
▼ BENEFITS
BRANDS AND PRODUCTS
>
280
>
>
Neutral, matt, translucent appearance; offers more privacy
than acid-etched Matelux
Highly resistant to stains on the paint side, especially
fingerprints
High level of light transmission.
www.yourglass.com
No
EVA
No
Safety glass possible
With SAFE or SAFE+ film
No
Surface treatment
Painting and varnishing
By definition, Lacomat glass is painted
on one side
Silvering
No
Sandblasting
Yes – on the side opposite the paint –By
definition, Lacomat is a matt-finish glass
Acid etching
Cutting and processing
Rectangles, circles
Edge-grinding, treatment, drilling, notches
Yes – Can be cut like conventional
mirror glass
Stress resistance
Heat resistance
Lacomat can withstand temperatures up to 80°C
Moisture resistance
All Lacomat colours can be used in humid environments
(bathrooms and kitchens) but should never be immersed in water
UV resistance
Yes – The colours are set during the manufacturing process (no discolouration)
DECORATIVE GLASSES
▼ DESCRIPTION
PVB 281
▼ BONDING/SETTING
There are two types of setting:
>
UV glue can be used to fit Lacomat glass to metal, making it
the ideal product for design furniture (sliding and non-sliding
doors, cupboards, shelves, bookcases, partitions, etc.)
>
Setting using rebates or metal clips.
3.2
MATT-FINISH GLASSES
3.2
MATT-FINISH GLASSES
MATELUX
Acid-etched glasses
LACOMAT
Please refer to the cutting and installation guides available at
www.yourglass.com – Lacomat brand.
▼ USES
Yes
Insulating glazing
Yes – The unit is made using clear float glass only. Use the painted side only in position 2 or 3 (i.e. facing into the cavity between
the panes). The paint should be edge-stripped
BRANDS AND PRODUCTS
▼ APPLICATIONS
282
Interior
- Furniture: partitions, tables, shelves, fixed and sliding doors in
cupboards and wardrobes, shelves, etc.
- Wall covering
Exterior
No – except for special double glazing with Lacomat facing the
inside of the building.
▼ STANDARD THICKNESSES (mm)
3
4
5
6
Classic
✓
✓
✓
White
✓
✓
✓
www.yourglass.com
7
8
10
12
✓
✓
✓
✓
✓
✓
▼ DESCRIPTION
>
Float glass, one side of which has a high-quality, acid-etched
finish
>
Multiple processing options: may be toughened, laminated
(with a clear or coloured interlayer), assembled in double
glazing, etc.
>
Available in “Antislip” version for steps and floors
>
Use: ideal for interior (furniture, etc.) and exterior (façades
and roofs, etc.) applications.
▼ BENEFITS
>
Translucent, neutral satin finish glass: more transparent than
Lacomat or sandblasted glass
>
Easy to maintain, highly resistant to stains
>
Acid-etching is favoured for its fine and homogenous grain
>
High level of light transmission: Matelux offers the same
level of light transmission as float glass of the same thickness; light transmission can be as high as 90% depending on
the thickness of the glass.
DECORATIVE GLASSES
Single glazing
283
▼ RANGE
There are three types of etching and several types of base glass
depending on the required level of translucence, colour and
appearance.
Type of etching
Base glass
Classic etching
One side
Light Double-sided
etching
etching
Very slightly
translucent on one side
Clear
Light
Double Sided
Clearvision
Linea Azzurra
PrivaBlue
Green
Bronze
Grey
Stopsol Supersilver
clear
Stopsol Supersilver
green
Stopsol Supersilver
Dark Blue
3.2
MATELUX
MATT-FINISH GLASSES
3.2
MATT-FINISH GLASSES
MATELUX
Clear float glass
Clear
(edge lightly green)
✓
Clearvision
(clear edge - very
refined white satin
finish)
✓
Linea Azzurra
(edge very lightly
blue)
✓
✓
✓
Coloured float glass
✓
Green
✓
PrivaBlue
✓
Grey
✓
BRANDS AND PRODUCTS
Glass with a Stopsol coating
284
Supersilver clear
✓
Supersilver green
✓
Supersilver Dark Blue
✓
▼ SPECIFIC APPLICATIONS OF
MATELUX STOPSOL
>
Description
Float glass with one side coated in a Stopsol reflective coating
and the other acid-etched. The side with the reflective coating
should always be positioned against the supporting structure.
>
Range
Available in Matelux Stopsol Supersilver clear, Matelux Stopsol
Supersilver green and Matelux Stopsol Supersilver Dark Blue.
www.yourglass.com
DECORATIVE GLASSES
Bronze
285
Stopsol Supersilver Dark Blue vision glass and
Matelux Stopsol Supersilver Dark Blue spandrel
▼ Specific applications of Matelux
antislip
> The
special etching gives this glass antislip properties (in
accordance with German standard DIN 51130, classified
R10)
> Procedure
patented by AGC Flat Glass Europe
> Available in standard for clear Planibel float and for extra clear
3.2
MATELUX
MATT-FINISH GLASSES
3.2
MATT-FINISH GLASSES
MATELUX
Planibel Clearvision.
▼ PERFORMANCE
Matelux
Aesthetic benefits
· Combines seamlessly with corresponding Stopsol vision glass
· Contrasting aesthetic effect of vision glass (neutral or
reflecting) and satin-finish spandrels
clear
· Dynamic look: in rainy weather, the wet Matelux Stopsol spandrel is shiny and reflective, while in sunny weather the glass
has a satiny, metallic look.
Matelux Stopsol Supersilver wet
Matelux Stopsol Supersilver dry
BRANDS AND PRODUCTS
Clearvision
286
Linea Azzurra
www.yourglass.com
Energy Light
Composition properties
properties
(mm)
LT (%) LR (%) Tot EA (%) SF (%) SC
Ug-value
W/(m².K)
3
90
7
7
88
1.01
5.8
4
90
7
9
87
1.00
5.8
5
89
7
10
86
0.99
5.8
6
89
7
11
85
0.98
5.7
8
88
7
15
83
0.95
5.7
10
87
7
18
81
0.93
5.6
12
86
7
20
79
0.91
5.6
3
91
7
3
91
1.03
5.8
4
91
7
3
90
1.03
5.8
5
91
7
4
90
1.03
5.7
6
91
7
4
90
1.03
5.7
8
91
7
5
89
1.02
5.7
10
91
7
5
89
1.02
5.6
12
91
7
6
89
1.01
5.6
15
83
7
33
69
0.79
5.5
19
81
7
39
66
0.76
5.4
DECORATIVE GLASSES
>
287
▼ TECHNICAL SPECIFICATIONS
Processing options
▼ MAINTENANCE
Easy to maintain. Clear water should be used.
Heat treatment
Heat-strengthening and thermal
toughening
Yes
Silk screen-printing and enamelling
Yes – On both sides
Bending
Yes
▼ USES
Single
glazing
Yes – Matelux: the acid-etched side may or may not be exposed externally
depending on the required look
Yes ­– Matelux Stopsol: The Stopsol coating generally faces the unexposed
side
Insulating
glazing
Yes – It is advisable to ensure that the etched side faces into the doubleglazing unit. Silicone should be used for the double glazing joints where
the etched side is in #2 or #3
Laminating
PVB
Yes – The acid-treated side should not be
positioned against the PVB layer (to retain the
unique matt appearance of Matelux)
EVA
Yes
Safety glass possible
With SAFE or SAFE + film
No
▼ APPLICATIONS
Interior
- Furniture: partitions, tables, shelves, fixed and sliding doors for cupboards and wardrobes, display cases and glass bases - Specific applications:
. Matelux Double Sided: doors
. Matelux Linea Azzurra: tables, shelves, basin units, floors and staircases
due to the broad thicknesses available
. Matelux antislip: for stairs and floors
Exterior
Yes – For all construction and renovation applications
Matelux Stopsol glass suits spandrel panels.
Surface treatment
Painting and varnishing
Yes – On the side opposite the etching. See the
Matelac range of glasses
Silvering
Yes – On the non-etched side – See range of
Matelac Silver glasses
Sandblasting
By definition Matelux is a matt-finish glass
Acid-etching
By definition Matelux is an acid-etched glass
3.2
MATELUX
MATT-FINISH GLASSES
3.2
MATT-FINISH GLASSES
MATELUX
Cutting and processing
Yes – Cuts like a traditional float glass
BRANDS AND PRODUCTS
Edge-grinding, treatment, drilling,
notches
288
Stress resistance
Heat resistance
Same as float glass
Moisture resistance
Yes – Where the etched side of the Matelux
glass is exposed to water, the etching becomes
less visible. It recovers its uniform appearance
when dry
UV resistance
Yes – may be exposed to the sun and to artificial
light
Reaction to fire
A1
Bending resistance
Matelux offers the same bending resistance as
Planibel float glass – (tested against standard
EN 1288-3)
www.yourglass.com
▼ STANDARD THICKNESSES (mm)
Clear
3
4
5
6
✓
✓
✓
✓
Linea Azzurra
Bronze
Grey
Green
PrivaBlue
✓
✓
✓
✓
7
8
10
12
15
19
✓*
✓
✓*
✓
✓*
✓
✓
✓
✓
✓
✓
✓
Other thicknesses and Matelux products: depending on minimal quantities, please contact
your agency.
* Available in antislip.
DECORATIVE GLASSES
Rectangles, circles
289
▼ Introduction
Lacobel and Matelac are two brands of opaque float glass
designed for interior use only. The opaque appearance is
achieved by applying a high-quality paint to the back of the
glass.
Lacobel and Matelac have different looks:
>
Lacobel: reflective and shiny (paint + float glass)
>
Matelac: satin matt finish (paint + acid-etched float glass).
3.3
LACOBEL
Painted glasses
PAINTED GLASSES
3.3
PAINTED GLASSES
PAINTED GLASSES
Both types of glass are used in a wide variety of furniture applications and as wall cladding. They should not be used outdoors.
Both glasses can have a SAFE or SAFE+ safety backing applied
on request.
▼ DESCRIPTION
>
Planibel float glass coated on one side with a high-quality
paint
>
Opaque, bright appearance
>
Durable solution (paint protected by the glass)
>
38 shades (+ customised colours available on request)
including:
290
>
Available in SAFE and SAFE + version: this is a polypropylene
film applied to the back of the glass to ensure safety
>
Available with antibacterial process
>
For interior use only: wall covering, wardrobe doors and furniture.
▼ BENEFITS
>
www.yourglass.com
Durable appearance: to protect it against damage, the
back of the glass with the layer of paint is always positioned
against the surface to be covered. Positioning it in this way
also preserves the colour and appearance of the glass
DECORATIVE GLASSES
BRANDS AND PRODUCTS
· 15 ST: Standard colours (no minimum quantity) · 23 NST: non-standard colours (minimum quantity: 500 m²).
291
>
>
>
High-quality finishing: the manufacturing process guarantees uniform finishing and the paint adheres flawlessly to the
glass
Easy to assemble and maintain
Paints used are environmentally friendly.
▼ RANGE
Beige Classic
ST
RAL 1014
Blue Classic
NST
NST
NST
Blue Dark
NST
Brown Light
ST
REF 1342
Green Light
Blue Pastel
Blue Metal
NST
Brown Dark
ST
REF 1061
Green Pastel
ST
Blue Luminous
ST
RAL 5002
ST
Blue Chromatic
ST
REF 2220
NST
RAL 8017
NST
Black Classic
RAL 9005
REF 1435
REF 1236
NST
NST
REF 1603
REF 1010
REF 2230
Green Classic
Blue Light
Beige Dark
REF 1011
REF 1079
RAL 5023
Brown Classic
NST
RAL 1015
REF 1227
Blue Deep
Beige Light
Fuchsia
REF 1604
Green Soft
Processing options
Heat treatment
Heat-strengthening and
thermal toughening
No
Silk-screen printing and
enamelling
No
Bending
No
Laminating
PVB No
EVA
No
Safety glass possible
With SAFE or SAFE + film
Yes – Complies with standard EN 12600 class 2B2 for
safety of individuals.
See paragraph on SAFE and SAFE + safety backing
Surface treatment
NST
RAL 4006
ST
▼ TECHNICAL SPECIFICATIONS
3.3
LACOBEL
PAINTED GLASSES
3.3
PAINTED GLASSES
LACOBEL
NST
REF 2231
Painting and varnishing
By definition Lacobel glass is painted on one side
Silvering
No
Sandblasting
Yes – on side opposite paint – see Matelac for matt finish
Acid-etching
Yes – on side opposite paint – see Matelac for matt finish
Cutting and processing
Green Dark
REF 1164
RAL 6028
Grey Deep
NST
BRANDS AND PRODUCTS
RAL 7021
292
Orange Light
NST
REF 1602
ST
ST
White Soft
NST
Lilac
Red Classic
ST
White Pure
RAL 9003 on extraclear
Grey Dark
NST
REF 2232
NST
Orange Classic
Edge-grinding, treatment,
drilling, notches
NST
Red Luminous
Stress resistance
Heat resistance
Lacobel paints can withstand temperatures up to 80°C
Moisture resistance
- All Lacobel colours can be used in humid environments
(bathrooms and kitchens) but should never be immersed
in water
- The two metallic colours (Metal Grey and Blue) require a
SAFE or SAFE+ film to be applied in such locations
- Lacobel should be protected from any water leaking in
behind the glass (silicone should be used for seals).
UV resistance
Yes – The colours are fixed during the manufacturing
process (no discolouration)
ST
REF 1586
ST
Yellow Light
Yes – Can be cut like traditional mirror glass
ST
NST
REF 1002
Yellow Luminous NST
REF 1601
ST = Standard / NST = Non standard (for orders over de 500 m2).
Dark Grey 2232, Soft Green 2231 and Classic Brown 2230 vary depending on the thickness
of the glass. Some of the shades shown in photographs may differ from the actual colour and
AGC therefore recommends that you view a LACOBEL sample for an accurate idea of colour
when making your choice.
www.yourglass.com
Rectangles, circles
RAL 2001
REF 1098
RAL 9010
NST
ST
REF 1202
REF 1074
RAL 3004
Yellow Pastel
Orange Soft
Grey Classic
RAL 7035
RAL 9006
REF 1116
Red Dark
Grey Metal
NST
DECORATIVE GLASSES
Green Luminous NST
293
▼ BONDING/SETTING
▼ STANDARD THICKNESSES (mm)
AGC recommends the following fixing methods:
>
Bonding: · tile-adhesive: Lacobel
3
Beige
Black
· silicone: Lacobel and Lacobel SAFE / SAFE+
· adhesive tape: Lacobel and Lacobel SAFE / SAFE+.
>
Blue
Mechanical:
· framing
Green
· metal clips
· screws fixed directly into the glass.
Please refer to the cutting and installation guides available at www.
yourglass.com – Lacobel.
Grey
Orange
Red
White
▼ USES
Single glazing
Yes
Insulating glazing
No – see applications
Classic
Classic
Luminous
Pastel
Metal
Dark
Chromatic
Pastel
Classic
Metal
Classic
Luminous
Dark
Soft
Pure
✓
✓
✓
4
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
5
✓
✓
✓
✓
✓
✓
✓
6
7
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
8
10
✓
3.3
LACOBEL
PAINTED GLASSES
3.3
PAINTED GLASSES
LACOBEL
✓
✓
✓
✓
✓
✓
✓
✓
Other Lacobel thicknesses and colours: depending on minimum quantities.
294
Interior
- Furniture: partitions, tables, shelves, fixed and sliding doors for
cupboards and wardrobes, display cases and glass bases
- Wall coverings
Exterior
No – Lacobel cannot be used in façade double glazing, even if the
painted side faces inwards (risk of thermal shock)
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ APPLICATIONS
295
▼ BENEFITS
>
Durable appearance: to protect it against damage, the back
of the glass with the paint or silver (Matelac Silver) coating is
always positioned against the support structure. Positioning
it in this way also preserves the colour and appearance of the
glass
>
High-quality finishing: the manufacturing process guarantees uniform finishing and the paint adheres flawlessly to the
glass
>
Acid-etching is favoured for its fine grain
>
Easy to assemble and maintain
>
Paints used are environmentally friendly.
3.3
MATELAC
PAINTED GLASSES
3.3
PAINTED GLASSES
MATELAC
Satin painted glass
▼ RANGE
296
>
Float glass which is acid-etched on one side and opacified
with a paint or silvered (Matelac Silver) on the other
>
Coloured satin appearance
>
Durable solution (paint protected by the glass)
>
12 shades (+ customised colours available upon request)
>
Available in a SAFE or SAFE + version: this is a polypropylene
film applied to the back of the glass to ensure safety
>
Classic Black
RAL 9005
Soft White
RAL 9010
Pure White
Metal Grey
RAL 9006
Metal Blue
REF 1435
Classic Orange
RAL 9003
RAL 2001
Deep Grey
RAL 7021
Luminous Red
REF 1586
For interior use only: wall covering, wardrobe doors and furniture.
Dark Red
RAL 3004
Silver
Silver Bronze
Silver Grey
Some shades shown below in photographs may differ from the actual colour and AGC
therefore recommends that you view a Matelac sample for an accurate idea of colour when
making your choice.
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ DESCRIPTION
297
▼ TECHNICAL SPECIFICATIONS
Processing options
Heat treatment
Heat-strengthening and thermal
toughening
Matelac paints can withstand temperatures up to 80°C
Moisture resistance
All Matelac colours can be used in humid environments
(bathrooms and kitchens) but should never be immersed
in water.
The two metallic colours (Metal Grey and Blue) require a
SAFE or SAFE + film to be applied in such locations.
Matelac should be protected from any water leaking in
behind the glass (silicone should be used for seals).
UV resistance
Yes – The colours are fixed during the manufacturing
process (no discolouration)
No
Silk screen-printing and enamelling No
Bending
Stress resistance
Heat resistance
No
Laminating
PVB
No
EVA
No
3.3
MATELAC
PAINTED GLASSES
3.3
PAINTED GLASSES
MATELAC
Safety glass possible
Yes – Complies with standard EN 12600 class 2B2
for safety of individuals.
See paragraph “SAFE and SAFE + safety backing”
Surface treatment
>
Bonding:
By definition Matelac glass is painted and opacified
on one side*
Silvering
Matelac Silver, Silver Grey and Silver Bronze already
have a silvering layer on the non-etched side.
· Silicone: Matelac and Matelac SAFE / SAFE+
Sandblasting
By definition Matelac glass is acid-etched on one
side
>
· Tile-adhesive: Matelac
· Adhesive tape: Matelac and Matelac SAFE / SAFE+.
Mechanical:
Cutting and processing
· Framing
Rectangles, circles
· Metal clips
Edge-grinding, treatment, drilling, Yes – Can be cut like traditional mirror glass
notches
* With the exception of Matelac Silver, which is opacified by silvering.
BRANDS AND PRODUCTS
AGC recommends the following two methods: Painting and varnishing
Acid-etching
298
▼ BONDING/SETTING
www.yourglass.com
· Screws fixed directly into the glass.
Please refer to the cutting and installation guides available at www.
yourglass.com – Matelac.
DECORATIVE GLASSES
With SAFE or SAFE + film
299
▼ DESCRIPTION
Single glazing
Yes
Insulating glazing
No
SAFE is a polypropylene film applied to the painted side of the
glass and has a dual function:
▼ APPLICATIONS
>
the film protects the paint from scratches.
Interior
SAFE exists in two versions: SAFE and SAFE+.
Exterior
No – Matelac cannot be used in façade double glazing,
even if the painted side faces inwards (risk of thermal
shock)
This film is available from AGC in cut sizes only.
Matelac
Black
Blue
Grey
Orange
Red
Silver
BRANDS AND PRODUCTS
if the glass breaks, the splinters adhere to the film thereby
preventing injury and damage
- Furniture: partitions, tables, shelves, fixed and sliding
doors for cupboards and wardrobes, display cases and
glass bases
- Wall coverings
White
3
Classic
Metal
Metal
Deep
Classic
Luminous
Dark
Clear
Bronze
Grey
Soft
Pure
4
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Other thicknesses: depending on minimum quantities.
www.yourglass.com
3.3
> SAFE
The glass can be bonded with silicone as long as a primer is
applied beforehand on the film side. > SAFE+
▼ STANDARD THICKNESSES (mm)
300
>
PAINTED GLASSES
▼ USES
5
6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
The new SAFE+ film is designed for use with DLF glass formats.
It offers several advantages compared with the traditional SAFE
film:
· no overlap of the polypropylene film: the SAFE+ film is
applied to the entire sheet making the cutting process easier
(special cutting recommendations available from your local
agent)
· bonds more easily: glass with a SAFE+ film can be bonded
with silicone (a primer is not always required).
▼ SAFETY LEVELS
When impacted on the glass side, the SAFE or SAFE+ film
complies with the requirements set out in standard EN 12600.
The tests performed by an independent institute in respect of
standard EN 12600 clearly demonstrate that as from a thickness of 3 mm, Lacobel and Matelac glasses featuring SAFE or
SAFE+ have a breakage pattern similar to a laminated glass
(type B). As such, Lacobel/Matelac SAFE / SAFE+ can now be
used in broad glass walls.
DECORATIVE GLASSES
3.3
PAINTED GLASSES
SAFE
and SAFE +
Safety backing for Lacobel and Matelac
MATELAC
301
Lacobel / Matelac SAFE / SAFE+
Impact resistance as per EN 12600
3 mm
2B2
4 mm
2B2
5 mm
2B2
6 mm
2B2
3.4
MIRRORS
MIRRORS
3.3
PAINTED GLASSES
SAFE and SAFE +
▼ CUTTING
The Easycut system makes cutting glass coated with a SAFE or
SAFE+ film easy: the cut is made directly through the film and
the glass. 302
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
For further information please consult the cutting and installation
guides for Lacobel and Matelac available at www.yourglass.com.
303
3.4
MIRRORS
3.4
MIRRORS
MIROX
MNGE
Environmentally friendly mirrors
MIRRORS
▼ introduction
Glaverbel, now renamed AGC Flat Glass Europe, was the first
company to come up with a cutting-edge mirror technology,
Mirox, that has become a global benchmark.
The ongoing development process pioneered by AGC has
enabled the production of mirrors of unprecedented quality.
Mirox New Generation Ecological and the latest addition to the
range, Mirox 3 G, are the two ecological mirrors in the AGC
Flat Glass Europe range.
Generation 1
Mirox
Generation 2
Mirox New Generation
Ecological
Generation 3
Mirox G
Toxic products contained in the paints used
• copper removed
• lead content reduced
significantly
• copper removed
• lead also removed
• formaldehydes removed
Resistance to corrosion
average
excellent (green-coloured
excellent (new dark greyprotective paint on the rear coloured Epoxy protective
of the mirror)
paint)
▼ DESCRIPTION
>
The patented manufacturing process ensures that MNGE is
a high-quality, highly resistant mirror that easily exceeds the
most stringent standards
>
Available in a SAFE and SAFE+ version: a polypropylene film
is applied to the back of the glass to prevent injury. If the
glass breaks, the fragments adhere to the plastic film and do
not break up.
Resistance to scratches
average
average
excellent (new dark greycoloured Epoxy protective
paint)
Adhesion
BRANDS AND PRODUCTS
adhesive tapes
304
glue, silicones and adhesive twice as many compatible
tapes
adhesives
The mirror range also includes the antique mirror Mirold and
the two-sided bathroom mirror Sanilam Easycut.
▼ BENEFITS
>
Unparalleled resistance to corrosion and ageing: lasts three
times longer than conventional mirrors
>
Enhanced resistance to harsh cleaning products: seven times
more resistant than conventional mirrors
>
No pitting or bloom over time
>
Manufactured using environmentally friendly process.
▼ RANGE
Mirox MNGE is available on clear, grey, PrivaBlue, bronze, gold
and green base float glass.
www.yourglass.com
DECORATIVE GLASSES
copper + lead present
305
▼ TECHNICAL SPECIFICATIONS
Processing options
Heat-strengthening and thermal
toughening
No
– Unless cold silk-screen-printing techniques are
Silk-screen printing and enamelling No
used on the side opposite the silvering
Bending
No
Laminating
· adhesive tape: Mirox MNGE and Mirox MNGE SAFE/SAFE+.
>
Mechanical fixing:
· rebate
· metallic clips.
EVA
No
Please refer to the cutting and installation guides available at
www.yourglass.com – Mirox MNGE.
Yes – Complies with standard EN 12600 class 2B2
for safety of individuals. Applying a SAFE film also
makes the silvering resistant to scratches when the
back of the glass is exposed ▼ USES
Surface treatments
Painting and varnishing
No Silvering
By definition, Mirox MNGE is silvered on one side
Sandblasting
Yes – On the side opposite the silvering
Acid-etching
Yes – On the side opposite the silvering – See Matelac Silver
Cutting and processing
Rectangles, circles
Edge-grinding, treatment, drilling, Yes
notches
Stress resistance
Heat resistance
The silvering can withstand temperatures up to 80°C
Moisture resistance
Yes – Can be used in applications such as kitchens or
bathrooms with normal humidity levels and ventilation.
Should not be immersed in water
UV resistance
Yes
Fire retardant
Mirox A1
Mirox SAFE A2 s1 d0
Single glazing
Yes
Insulating glazing
No – see applications
▼ APPLICATIONS
Interior
- Furniture: partitions, tables, shelves, fixed and sliding
doors for cupboards and wardrobes, display cases and
glass bases
- Wall cladding
Exterior
No
▼ STANDARD THICKNESSES (mm)
1.9
Clear
Bronze
Green
Gold
Grey
PrivaBlue
SAFE and SAFE+
✓
2.1
3
4
5
6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Other thicknesses: depending on minimum quantities.
www.yourglass.com
3.4
Bonding:
· silicone: Mirox MNGE and Mirox MNGE SAFE/SAFE+
No
With SAFE or SAFE + film
BRANDS AND PRODUCTS
AGC recommends two methods:
PVB Safety glass possible
306
▼ BONDING/SETTING
>
Heat treatment
MIRRORS
MIROX MNGE
✓
DECORATIVE GLASSES
3.4
MIRRORS
MIROX MNGE
307
▼ BENEFITS
>
>
>
>
3.4
MIROX 3G
MIRRORS
3.4
MIRRORS
MIROX
3G
Copper- and lead-free ROHS mirrors
Eco-friendly mirror – ROHS: 50% less lead than MNGE (0.2%  < 0.1%)
0% copper
70% fewer solvents than MNGE
0% formaldehydes (colourless irritant gas, very harmful to
human health).
Scratch- and corrosion-resistant mirror:
· 10 x more corrosion resistant than the prescribed standard
(CASS test)
· 3 x more scratch-resistant than traditional mirrors.
>
>
Easy installation: compatible with twice as many adhesives >
Available in clear and tinted float glasses.
▼ RANGE
308
Mirox 3G is available on the following base glass: clear float,
clearvision, grey, PrivaBlue, bronze and green.
>
A so-called “third-generation” mirror
>
The product of an ongoing development process, ensuring
it exceeds the toughest resistance standards, whilst offering
unparalleled environmental and industrial quality
>
Eco-friendly: no copper, no lead *, no formaldehydes
Thermal treatment
>
Distinctive marking: Mirox 3G Ecological is tattooed on the
back
Heat strengthened and toughened No
>
>
>
Complies with the EU’s Restriction of Hazardous Substances
(ROHS) Directive, which aims to reduce the use of certain
hazardous substances, including lead, in industrial production processes
Available in SAFE and SAFE+ versions: the back of the glass
is covered in a polypropylene film to protect against injury; if
the glass breaks, the fragments are not scattered, but remain
attached to the plastic film.
Available in antibacterial version.
* < 0.1%.
www.yourglass.com
▼ TECHNICAL SPECIFICATIONS
Processing options
– except for cold silk-screen printing on the
Silk screen printing and enamelling No
non-silvered side
Bending
No
Laminated glass
PVB No
EVA
No
Safety options
With SAFE or SAFE+ film
Yes – in accordance with standard EN 12600 Class
2B2 to ensure the safety of individuals. Safe also
protects the silvering against deterioration from scratching when the back of the glass is exposed
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ DESCRIPTION
309
▼ USES
Surface treatments
Paint and varnish
No
Single pane
Silvering
Mirox 3G is by definition silvered on one side
Yes
Insulating glass
Sandblasting
Yes
No
Acid etching
Yes – on non-silvered side– see Matelac Silver
Cutting and processing
▼ standard THICKNESSES (mm)
Rectilinear, circular
Bevelling, edge treatment, drilling, Yes
notches
Resistance to stresses
Heat resistance
Silvering resists temperatures of up to 80 °C
Moisture resistance
Yes – can be used in applications such as kitchens and
bathrooms with a normal moisture level and good ventilation. Immersion in water not recommended
UV resistance
Yes
Fire rating
A1
3.4
MIROX 3G
MIRRORS
3.4
MIRRORS
MIROX 3G
Clear
Bronze
Grey
PrivaBlue
Green
1.9
3
4
5
6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Mirox 3G Clearvision (non standard): available on request.
▼ BONDING/SETTING
AGC recommends two methods >
Fit using bonding:
· Silicone · Adhesive tape.
310
Fit mechanically
· Glazing rebate
· Metal clips.
Please refer to the cutting and installation guides on
www.yourglass.com (Mirox 3G range).
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
>
311
▼ TECHNICAL SPECIFICATIONS
3.4
MIROLD MORENA
MIRRORS
3.4
MIRRORS
MIROLD
MORENA
Antique oxidised mirror
Processing options
Heat treatment
Heat-strengthening and
thermal toughening
No
Silk-screen printing and
enamelling
No – Unless special cold silk-screen-printing techniques are
used on the side opposite the silvering
Bending
No
Laminating
PVB
No
EVA
No
Safety glass possible
With SAFE or SAFE + film
▼ DESCRIPTION
Yes – Complies with standard EN 12600 class 2B2 for
safety of individuals. Applying a SAFE film also makes the
silvering resistant to scratches when the back of the glass
is exposed
Surface treatments
Painting and varnishing
No >
Mirror on clear float glass
Silvering
By definition, Mirold mirror glass is silvered on one side
>
Antique look achieved through controlled oxidation of the
silver coating.
Sandblasting
Acid-etching
Yes – On the side opposite the silvering
312
Rectangles, circles
Unique antique appearance.
Edge-grinding, treatment,
drilling, notches
Yes – Can be cut like a traditional mirror
Heat resistance
The silvering can withstand temperatures of up to 80°C
Moisture resistance
Yes – Can be used in applications such as bathrooms
and kitchens with normal humidity levels and ventilation.
Should not be immersed in water
UV resistance
Yes
Stress resistance
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
Cutting and processing
▼ BENEFITS
313
Lacobel, Matelac and Mirold Morena
▼ BONDING/SETTING
▼ DESCRIPTION
AGC recommends two methods:
SAFE is a polypropylene film applied to the silvered side of the
glass and has a dual function:
>
Bonding:
· Silicone
· Adhesive tape.
>
Mechanical fixing:
>
if the glass breaks, the splinters adhere to the film thereby
preventing injury and damage
>
the film protects the varnish or silvered side from scratches.
· Rebate
SAFE exists in two versions: SAFE and SAFE+.
· Metal clips.
>
Please refer to the cutting and installation guides available at
www.yourglass.com – Mirox MNGE.
▼ USES
Yes
Insulating glazing
No
▼ APPLICATIONS
Interior
- Furniture: partitions, tables, shelves, fixed and sliding
doors for cupboards and wardrobes, display cases and glass bases
- Wall cladding
Exterior
No
SAFE
This film is available from AGC in cut sizes only.
The glass can be bonded with silicone as long as a primer is
applied to the back of the film beforehand on the film side.
>
Single glazing
3.4
SAFE
and SAFE +
Safety backing for Mirox MNGE,
MIRRORS
3.4
MIRRORS
MIROLD MORENA
SAFE+
The new SAFE+ film is designed for use with DLF glass formats.
It offers several advantages compared with the traditional SAFE
film:
· no overlap of the polypropylene film: the SAFE+ film is
applied to the entire sheet making the cutting process easier
(special cutting recommendations available from your local
agent)
· bonds more easily: glass with a SAFE+ film can be bonded
with silicone (a primer is not always required).
314
4 and 6 mm.
www.yourglass.com
When impacted on the glass side, the SAFE or SAFE+ film
complies with the requirements of standard EN 12600.
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ SAFETY LEVELS
▼ STANDARD THICKNESSES (mm)
315
3.4
MIRRORS
3.4
MIRRORS
SANILAM
EASYCUT
Laminated, two-sided safety mirrors
SAFE and SAFE +
The tests performed by an independent institute in respect
of standard EN 12600 clearly demonstrate that as from a thickness of 3 mm, the SAFE and SAFE+ versions of Mirox and
Mirold have a breakage pattern similar to a laminated glass.
As such, Mirox MNGE SAFE/SAFE+ can now be used in broad
glass walls.
Mirox MNGE SAFE / SAFE+ Impact resistance as per EN 12600
3 mm
2B2
4 mm
2B2
5 mm
2B2
6 mm
2B2
▼ CUTTING
The Easycut system makes cutting glass coated with a SAFE or
SAFE+ film easy: the cut is made directly through the film and
the glass.
For further information please consult the cutting and installation
guide for Mirox MNGE at www.yourglass.com.
▼ DESCRIPTION
>
Comprising two Mirox MNGE mirrors assembled using an
adhesive coating to ensure mirroring on both sides
>
Use: bathroom furniture.
316
www.yourglass.com
>
Mirror appearance on both sides
>
The whole surface and edges of the silver coatings are protected
>
Guaranteed against corrosion for 10 years when cut and
processed by AGC or by an approved processor (list of
approved processors available from AGC).
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ BENEFITS
317
▼ TECHNICAL SPECIFICATIONS
Processing options
Heat treatment
Heat-strengthening and
thermal toughening
No
Silk screen-printing and
enamelling
No
Bending
No
EVA
No – Sanilam Easycut is not made from a PVB or EVA
assembly: comprises two mirrors bonded with an adhesive
coating 60 microns thick
Single glazing
Yes
Insulating glazing
No
Interior
Yes – Bathroom cabinets with or without framing
Exterior
No
▼ STANDARD THICKNESSES (mm)
2+2 (4 mm) or 3+3 (6 mm) assembly.
Safety glass available
With SAFE or SAFE+ film
▼ USES
▼ APPLICATIONS
Laminating
PVB 3.4
SANILAM EASYCUT
MIRRORS
3.4
MIRRORS
SANILAM EASYCUT
No – Because, by definition, Sanilam Easycut is a safety
assembly
Surface treatments
Painting and varnishing
No Silvering
By definition, Sanilam Easycut mirror glass is silvered on
one side
Sandblasting
Yes
Acid-etching
Yes
Cutting and processing
318
Yes
Heat resistance
The silvering can withstand temperatures up to 80°C
Moisture resistance
Yes – Can be used in applications such as kitchens or
bathrooms with normal humidity levels and ventilation.
Should not be immersed in water
UV resistance
Yes
Stress resistance
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
Rectangles, circles
Edge-grinding, treatment,
drilling, notches
319
Several assembly techniques are used to produce laminated
Stratobel glasses and create particular looks in terms of interior
and exterior design.
Depending on the technique used, the look will be transparent,
coloured, metallic or translucent/opalescent.
The level of safety offered will depend on the technique used
and, where PVB is used, the amount of PVB used in the application.
See Stratobel in the chapter entitled “Brands and products” and
the summary tables for decorative applications in the “How to
choose your glass” chapter.
The following assembly options are available (Stratobel Color): www.yourglass.com
>
Decorative interlayers
· Stratobel Color Standard: a range of laminated glasses with
various coloured interlayers which cannot be combined
· Stratobel Color Rainbow: a range of laminated glasses with
various coloured interlayers. These interlayers can be combined and can therefore create a rich shade palette.
>
Decorative glasses
· Stratobel Imagin: a range of laminated glasses assembled
with patterned glasses – see Imagin.
3.5
DECORATIVE LAMINATED GLASSES
▼ introduction
DECORATIVE GLASSES
3.5
DECORATIVE LAMINATED GLASSES
BRANDS AND PRODUCTS
320
DECORATIVE LAMINATED GLASSES
DECORATIVE LAMINATED
GLASSES
321
combined
▼ COLOUR RANGE
Translucent White 2165
Light Bronze 5538 (0.76 mm)
Dark Neutral Brown 3609
Cool Blue 6376
Medium Neutral Brown 3628
Bronze 6452
Light Neutral Brown 3655
Grey 6544
Ligth Blue Green 3773
SkyBlue 7558
Light Bronze 5538 (0.38 mm)
Cool White 2180
▼ PERFORMANCE
Please visit www.yourglass.com.
▼ COMPONENTS OF STRATOBEL COLOR
3.5
STRATOBEL COLOR STANDARD
DECORATIVE LAMINATED GLASSES
3.5
DECORATIVE LAMINATED GLASSES
STRATOBEL
COLOR
STANDARD
Laminated glasses with coloured interlayers which cannot be
Stratobel components can be varied to provide other functions.
Heat treatment
BRANDS AND PRODUCTS
The assembly includes one interlayer in a standard colour. The
PVB interlayers cannot be combined with each other or with a
transparent PVB.
322
>
Wide range of colours
>
Other colours: see Stratobel Color Rainbow.
▼ BENEFITS
Heat-strengthening and thermal
toughening
Silk-screen printed glass
Enamelled glass
Bent glass
Laminated glass
PVB
EVA
>
Decorative and solar control
Decorative
>
Mechanical performance identical to clear Stratobel having
the same structure
Patterned glass
>
Range of contemporary colours.
Painted or varnished glass
Silvered glass
www.yourglass.com
Yes – Contact us for advice on individual cases Yes – By definition, Stratobel Color is a safety glass
with a decorative interlayer. However, a decorative
interlayer cannot be combined with an acoustic
interlayer
No
See the Imagin range – selection of laminable
patterns
Surface treatment
No
No
Yes – The sandblasted or acid-etched side should face
Sandblasted or acid-etched glass away
from the PVB to retain its opalescent appearance
DECORATIVE GLASSES
▼ DESCRIPTION
323
which can be superimposed
▼ USES - STRATOBEL COLOR RANGE
Monolithic
glass
Insulating
glass
Yes
– Stratobel Color should be placed facing the exterior for
aesthetic reasons and to reduce the risk of breakage
due to thermal shock
– In cases where a safety solution is required both on the
inside and the outside: double glazing with Stratobel
Color (exterior) and standard Stratobel (interior)
– In roof applications: Stratobel Color (exterior) and
standard Stratobel (interior).
▼ APPLICATIONS
Interior
Yes – All applications involving furniture, partitions, glass floors
Exterior
Yes – All architectural, construction and renovation applications
3.5
STRATOBEL
COLOR
RAINBOW
Laminated glasses with coloured interlayers
DECORATIVE LAMINATED GLASSES
3.5
DECORATIVE LAMINATED GLASSES
STRATOBEL COLOR STANDARD
▼ DESCRIPTION
324
www.yourglass.com
>
Wide range of colours
>
More than 1,000 different tints
>
Translucent or transparent
>
Original appearance for your façades, conservatories, balconies, partitions, walls and doors.
DECORATIVE GLASSES
BRANDS AND PRODUCTS
The interlayers in this range can be used to create many different colours. They can easily be combined (superimposed)
to create more than 1,000 transparent or translucent colours
making it possible to obtain the perfect tone and intensity for
your architectural project.
325
▼ BENEFITS
>
Extensive range of colours available since coloured interlayers can be combined
>
Glass can be a different colour on each side
>
Mechanical performance identical to clear Stratobel having
the same structure.
▼ COLOUR RANGE
1 Coral Rose
8 Golden Light
2 Aquamarine
C Deep Red
3 Smoke Grey
D True Blue
4 Sahara Sun
9 Arctic Snow
5 Ruby Red
A Cool White
6 Sapphire
C Pure White
7 Midnight
E Tangerine
3.6
ANTIBACTERIAL GLASSES
ANTIBACTERIAL GLASSES
3.5
DECORATIVE LAMINATED GLASSES
STRATOBEL COLOR RAINBOW
▼ PERFORMANCE
See www.yourglass.com.
BRANDS AND PRODUCTS
See Stratobel Color Standard.
326
www.yourglass.com
▼ Description
The process developed and patented by AGC involves diffusing silver ions into the upper layers of the glass: the ions
interact with bacteria and destroy them by disabling their metabolism and disrupting their division mechanism. The antibacterial effect of the glass is ongoing, particularly in moisture and
temperature conditions favouring the development of bacteria
and mould.
DECORATIVE GLASSES
▼ COMPONENTS – USES – APPLICATIONS
327
▼ Benefits
>
Antibacterial glass bears a distinctive mark.
Unique product in the glass sector
> Eliminates 99.9% of bacteria that accumulate. The bacteria
tested on AB glass are found mainly in hospitals and are particularly responsible for nosocomial infections
> Prevents spread of fungi
> Easy to mount
> Easy to clean: resistant to cleaning products, including those
used in hospitals.
3.6
ANTIBACTERIAL GLASSES
ANTIBACTERIAL GLASSES
3.6
ANTIBACTERIAL GLASSES
ANTIBACTERIAL GLASSES
▼ Performance
Bacteria
99.9% less bacteria
Escherichia Coli
99.99% less bacteria
▼ Applications
Pseudomonas Aeruginosa
99.99% less bacteria
Inside
Yes – for partitions, wall covering and decorative mirrors
Outside
No
Aspergillus Niger
90% less bacteria
Candida Albicans
90% less bacteria
▼ range
BRANDS AND PRODUCTS
See the Planibel, Lacobel and Mirox (3G and MNGE) product
guides.
Staphylococcus Aureus
Fungi
328
▼ Processing options
>
Lacobel AB - opaque reflective glass - 15 standard colours
available - other colours available on request
> Planibel AB - clear or coloured glass
> Mirox AB - mirror.
www.yourglass.com
▼ Standard thicknesses
Please refer to Planibel, Lacobel and Mirox 3G.
DECORATIVE GLASSES
To evaluate the performance of antibacterial glass, tests have
been conducted on a representative range of bacteria and
fungi:
329
Left:
reflective float
3.7
Right:
no reflection with Glamatt
FRAMING GLASS
3.7
GLAMATT
Non-glare glasses for frames
FRAMING GLASS
FRAMING GLASS
▼ DESCRIPTION
>
Clear glass for picture frames that can be used to reduce the
negative effect of incident light by diffusing reflections
>
The framed item can be seen clearly
>
Excellent reproduction of contrasts and colours.
330
>
Reduces glare
>
Good colour diffusion
>
Excellent reproduction of contrasts
>
Easy to cut and clean.
▼ APPLICATIONS
Can be used to frame photographs, posters, adverts, maps,
degree and other certificates and documents.
▼ THICKNESSES
2 mm.
www.yourglass.com
DECORATIVE GLASSES
BRANDS AND PRODUCTS
▼ BENEFITS
331
Right:
no reflection with
Matobel One Side
▼ DESCRIPTION
Float glass which has been treated with a non-glare coating
on one side. The “matt” side should be installed facing the
outside of the frame.
> Clear glass for picture frames that can be used to reduce the
negative effect of incident light by diffusing reflections
> The framed item can be seen clearly.
BRANDS AND PRODUCTS
Anti-glare and accurate colour reproduction: the perfect balance*.
With a clarity rating of 50.9%, a gloss factor of 70** and a
haze value of 4.12%, Matobel One Side not only offers perfect optical properties by reducing the level of light reflection
but also excellent colour reproduction thanks to its neutral
appearance. This combination of properties presents users with
a perfectly reproduced image of any picture, photograph or
painting.
Kandinsky reproduction
332
▼ BENEFITS
>
Excellent reproduction of contrasts and colours
>
Easy to cut and clean.
3.7
▼ APPLICATIONS
Can be used to frame photographs, posters, advertisements,
maps, degree and other certificates and documents.
▼ THICKNESSES
1.9 and 2.9 mm.
* Values calculated by AGC for 1.9-mm thick Matobel One Side.
** Gloss: 70 +/- 5 in accordance with the relevant US standard (BYK Gardner,
Micromaster 60° angle).
www.yourglass.com
FRAMING GLASS
Left:
reflective float
MATOBEL ONE SIDE
DECORATIVE GLASSES
3.7
FRAMING GLASS
MATOBEL
ONE SIDE
Non-glare glass for frames
333