DATASHEET CAMERA HEAT SINK Heat sink and camera holder for 29 x 29 mm cameras KEY FEATURES: designed for 29 x 29 mm cameras compatible with Basler ace, JAI Go, AVT Mako reduces the operating temperature of the camera by up to 10°C reduces thermal noise of the camera and so improves the image quality improves the durability the camera and its smooth operation suitable for extreme conditions and applications with high temperatures the base can be used separately as a camera holder SPECIFICATION NAME UNIT VALUE Dimensions without mandrel mm 49 x 39 x 42 Length x mandrel diameter mm 30 x 12 Front camera dimensions mm 29 x 29 g 105 +/-3% Weight EXPLANATORY NOTES The camera heat sink consists of four parts, each connected with socked head screws. The two lateral parts are formed by aluminium heat sinks with cross-milled grooves for rapid heat transfer. The lateral parts are connected with a central plate - adaptor, to which the camera and the mandrel (holder) for the attachment to the system are attached. The camera heat sink is made of aluminium with elox coating in dull black colour; fasteners are made of stainless steel. The heat sink also functions as a fastener, which allows it with the camera to be used in any available clamping system. ORDERING INFORMATION: ITEM NUMBER NAME VXAT0008 Heat sink and camera holder for Basler Ace cameras VXAT0009 Standalone camera holder for Basler Ace cameras RECOMMENDED ACCESSORIES: ATEsystem s.r.o., 2016-02, EN Address: Tel.:+420 595 170 472 ATEsystem s.r.o. Studentská 6202/17 708 00 Ostrava-Poruba – Czech Republic www.visionx.cz [email protected] VisionX je obchodní značkou společnosti ATEsystem s.r.o. VisionX is a trademark of ATEsystem s.r.o. 1 DATASHEET CAMERA HEAT SINK Heat sink and camera holder for 29 x 29 mm cameras MOUNTING SYSTEM BALLUFF BASLER ACE CAMERA Balluff mounting hardware allows to create stable assemblies in many variants. Small, compact camera, high stability and reliability, resolution up to 14 MP, speed up to 850 fps, favourable price/performance ratio. DIAGRAM 1: DIAGRAM 2: Horizontal cut Top view EXAMPLES OF APPLICATION IMG 1: DIAGRAM 3: IMG 2: IMG 1: an image from camera without heat sink, camera temperature: 50,6 ° C IMG 2: an image from camera with heat sink, camera temperature: 46,3 ° C Assembly used: camera Basler acA192050gm (CMOS), exposition 10 s, maximum gain, after 1 hour of operation at an ambient temperature of about 25 ° C COOLING EFFICIENCY IN THE TEST: The graph shows the temperature rise in relation to time and operating temperature reached after 1 hour operation of the camera with power supplies of PoE or 12V, and all that with and without heat sink. ATEsystem s.r.o., 2016-02, EN Address: Tel.:+420 595 170 472 ATEsystem s.r.o. Studentská 6202/17 708 00 Ostrava-Poruba – Czech Republic www.visionx.cz [email protected] VisionX je obchodní značkou společnosti ATEsystem s.r.o. VisionX is a trademark of ATEsystem s.r.o. 2
© Copyright 2024 Paperzz